首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Variations in tree ring growth of Quercus suber L. were analysed using dendrochronological techniques on cork oak discs from trees harvested in the cork producing region of Alentejo, Portugal. A tree-ring chronology containing a strong common signal and covering the period from 1970 to 1995 was build for ca. 30-year-old cork oaks never submitted to cork harvesting using 14 trees that crossdated satisfactorily out of 30 sampled trees. The tree ring indices correlated positively with September temperature (r = 0.48, P < 0.05) and very strongly with precipitation totals from previous October until current February (r = 0.82, P < 0.001) showing that the water stored in the soil during the autumn and winter months prior to the growing season has a primordial effect on the growth of the given season. The effects of cork harvesting were analysed by comparing mean ring width, mean annual vessel area, vessel density (n°vessels/mm2), and vessel coverage (percentage of transverse surface occupied by vessels) between three mature cork oak trees and three young trees, for the period from 1987 to 1996, corresponding to the growth between two consecutive cork removals in the case of mature trees. In 1988, 1989 and 1996 (corresponding to the first and second years after cork removal, and 1996 to a year of cork removal), the ratios between ring widths of young versus mature trees was twice that for the rest of the period. However, an effect of cork removal indicated by eventual alterations in vessel size and distribution in the wood rings corresponding to the years 1988, 1989 and 1996 in the mature cork oaks was not observed.  相似文献   

2.
Cork oak (Quercus suber L.) has a dense wood that allows high-quality uses. In the present work, we study the influence of vessel characteristics, measured through image analysis and optical microscopy, on wood density, measured using X-ray microdensitometry, on 40-year-old trees. Vessel area increases with cambial age (5403–33064 μm2), while wood density decreases (1.229–0.836 g/cm3). The number of vessels is relatively constant at 6 vessels/mm2, while vessel proportion in cross-section increases from 3.3% near the pith to 20.5% near the bark. In growth rings closest to the pith, with high wood density and low vessel area, the relationship between the two variables is linear (R 2 = −32.1%, P < 0.01) but with increasing tree age and vessel size, the wood density remains rather constant, suggesting that decreases in density might compromise mechanical support of the tree at a stage when the increase in cross-sectional area alone might not provide mechanical stability. Other anatomical characteristics not considered in this study, like large xylem rays that increase with cambial age, may be responsible for the constant density.  相似文献   

3.
The radial variation of ring width and wood density was studied in cork oaks (Quercus suber) using microdensitometry. The observations were made in young never debarked cork oaks (30–40 years of age) and in mature trees under cork production (37–60 years of age). The cork oak wood is very dense (mean ring density 0.86 g.cm?3, between 0.79 g.cm?3 and 0.97 g.cm?3) with a small intra-ring variability (mean earlywood density 0.80 g.cm?3 and latewood density 0.90 g.cm?3). The density components decreased from pith to bark more rapidly until the 15th ring, and then only slightly. There were no significant differences in the mean density components between never debarked trees and trees under cork production but their outwards decrease was accentuated in the never debarked trees. The annual growth was high, with a ring width mean of 3.9 mm (4.2 mm in the first 30 years) and the latewood represented 57% of the annual growth.  相似文献   

4.
The variability of fibre and ray dimensions was studied at three radial positions (10, 50 and 90% of radius) in 5 cork oaks (Quercus suber L.) approximately 40 years old. Uniseriate ray height and cell number as well as multiseriate ray height and width were measured in tangential sections. Fibre length, width and wall thickness were measured after maceration. The most striking features of cork oak wood were the large multiseriate rays and the frequent homocellular uniseriate rays. On average multiseriate rays were 5.16 mm high and 0.48 mm wide, and uniseriate rays contained 11 cells and were 227 μm high. Neighbour rays presented large dimensional differences but there was no radial variation and there were very small between-tree differences. The radial maintenance of high and wide rays was discussed as a means to improve water shortage in response to water stress. Fibre dimensions increased radially but differed little between trees: on average, 960–1,220 μm length, 18.40–21.49 μm width and 6.66–8.07 μm wall thickness. The ray pattern showed enough variation for visual appreciation while ensuring within and between-tree uniformity. The presence of rays has to be taken into consideration for designing wood drying programs.  相似文献   

5.
Recent research is underway to study cork oak (Quercus suber L.) wood potential for production of wood components. A total of 35 stems of young and mature cork oaks were sampled, live sawn into flitches, scanned using VTT’s WoodCIM®, and the measured data computed by VTT’s PuuPilot software, allowing stem 3D reconstruction. Sawing simulations were run for 0.5 m and 1 m logs and the whole stem. Sawn products were (1) planks, (2) parquet, (3) lamparquet, and (4) external component of multilayer planks. Cork oak stems showed a moderate to small taper (mean 24 mm/m). Curviness varied between straight to significantly crooked stems (mean value 40 mm) Batch yields for the tested products ranged 25–43% and 37–50% for 0.5 m logs of young and mature trees, respectively; for 1 m logs, batch yields ranged 19–41% and 25–54%. When using the whole stem, batch yields were lower, ranging 11–38% and 15–50%. Higher yields were obtained for all log lengths and samples for production of lamparquet, parquet, and multilayer component.  相似文献   

6.
The genus Quercus, which belongs to the family Fagaceae, is native to the northern hemisphere and includes deciduous and evergreen species. The trees of the different species are very important from both economic and ecological perspectives. Application of new technological approaches (which span the fields of plant developmental biology, genetic transformation, conservation of elite germplasm and discovery of genes associated with complex multigenic traits) to these long-rotation hardwoods may be of interest for accelerating tree improvement programs. This review provides a summary of the advances made in the application of biotechnological tools to specific oak species. Significant progress has been made in the area of clonal propagation via organogenesis and somatic embryogenesis (SE). Standardized procedures have been developed for micropropagating the most important European (Q. robur, Q. petarea, Q. suber) and American (Q. alba, Q. bicolor, Q. rubra) oaks by axillary shoot growth. Although regenerated plantlets are grown in experimental trials, large-scale propagation of oak species has not been carried out. The induction of SE in oaks from juvenile explants is generally not problematic, although the use of explants other than zygotic embryos is much less efficient. During the last decade, enormous advances have been made in inducing SE from selected adult trees, mainly specimens of pedunculate oak (Q. robur) and cork oak (Q. suber). Advances in the understanding of the maturation and germination steps are required for better use of embryogenic process in clonal forestry. Quercus species are late-maturing and late-flowering, exhibit irregular seed set, and produce seeds that are recalcitrant to storage by conventional procedures. Vitrification-based cryopreservation techniques were used successfully in somatic embryos of pedunculate oak and cork oak, and an applied genbank of cork oak selected genotypes is now under development. The feasibility of genetic transformation of pedunculate oak and cork oak somatic embryos by means of co-culture techniques with several strains of Agrobacterium tumefaciens has also been demonstrated. To date, most research on the genomics of Quercus species has concerned population genetics. Approaches using functional genomics to examine the molecular and cellular mechanisms that control organogenesis and or somatic embryogenesis are still scarce, and efforts on the isolation and characterization of genes related to other specific traits should be intensified in the near future, as this would help improve the practical application of clonal forestry in recalcitrant species such as oaks.  相似文献   

7.
Oaks’ decline in vitality is attributed to a complex process that involves interactions of several factors leading to increased trees’ mortality. This study investigates the structure of trunk wood of oaks with reference to its physiological role in hydraulic conductivity. On the basis of the crown condition, the oaks were classified into three health groups: healthy trees, declining trees and dead trees. Anatomical traits of wood, such as annual ring width, vessel density, vessel diameter of earlywood and theoretical hydraulic conductivity, were measured and calculated. The narrowest annual rings formed by the cambium were observed in dead oaks. These trees were also characterized by the smallest diameter of earlywood vessels, not only in the period of occurrence of dieback symptoms, but also during their whole life. It is suggested that the formation of narrow annual rings and earlywood vessels of small diameter increases susceptibility of a tree to decay. A reduced vessel diameter implies changes in hydraulic conductivity of oak trunks and thus impairs the water transport, which affects the health of trees. The process of oak decline is considered to have characteristics of natural selection and leads to the elimination of the weakest trees.  相似文献   

8.

Key message

Optimal management of cork oak forest stands was analyzed for different site indices and cork growth rates. Optimal debarking intervals varied during the rotation and were sometimes shorter or longer than the officially recommended range of 9–14 years.

Context

Quercus suber L. is one of the most important multipurpose tree species in the Mediterranean area. Its main product is cork, appreciated for its elasticity, impermeability, and thermal insulation properties. Cork oaks are debarked at constant intervals, which vary from 9 to 14 years depending on the area. However, since the growth rate of cork is not constant during the rotation, it may be optimal to use variable debarking intervals.

Aims

This study optimized the debarking and cutting schedules of Quercus suber stands and analyzed the influence of economic and stand-related factors on optimal management.

Methods

The study employed a simulation system where the existing growth and yield models for Quercus suber were used with a non-linear derivative-free optimization algorithm. Discount rates and cork prices were tested as economic factors and cork growth rate and site productivity as stand-related factors.

Results

The optimal debarking interval varied during the rotation. Increasing cork growth rate increased the optimal number of debarkings and shortened their interval. Decreasing discount rate increased the optimal number of debarkings during rotation while decreasing cork price decreased the number of debarkings.

Conclusion

The profitability of the management of cork oak stands depends on site fertility and stand density; management is not profitable on poor sites or at high discount rates. This study is the first that simultaneously optimizes the cutting and debarking schedule of cork oak stands, allowing the debarking interval to vary.
  相似文献   

9.
An investigation was conducted to quantify fine roots and roots nodules over the four seasons in forestry and agroforestry alder (Alnus rubra) stands in North Wales. Soil samples collected in each season were excavated at three sampling points (0.30 m, 0.57 m and 1.00 m distance from the base of each tree) from nine trees of the agroforestry and forestry plots. Result showed that the density of live fine root had significant differences in between seasons and treatments (P ＜ 0.001). The mean weight density of live fine root over the four seasons in agroforestry and forestry was 0.27±0.01 kg·m-3 and 0.54±0.03 kg·m-3, respectively. Weight density of dead root in each system remained constant throughout the year. The mean weight density of dead root was also significantly different (P ＜ 0.01) between forestry and agroforestry systems. Weight density of live and dead root nodule was both constant throughout the year and between the different sampling distances. The mean weight densities of live and dead root nodule over the four seasons were 0.09±0.03 kg·m-3 and 0.05±0.03 kg·m-3 in agroforestry and 0.08±0.02 kg·m-3 and 0.03±0.01 kg·m-3 in the forestry plots, respectively.  相似文献   

10.
Cork oak landscape dynamics were assessed over a 47-year period (1958–2005) in an endangered region of southwest Portugal using a GIS approach. The area of cork oak woodlands was maintained during this period, but shifts due to land abandonment were evident leading to transformation of cork oak agriculture areas into woodlands and of cork oak woodlands into shrublands (average yearly change rates of 0.6 and 0.1%, respectively). The multi-temporal landscape analyses showed that expansion and regression rates of cork oak forests were similar (15 and 16 ha year−1, respectively). The main factor determining oak woodlands expansion and regression was related to land-use changes, but slope, aspect and soil type were also significant factors. The substitution of agriculture lands and oak woodlands by shrublands has a determining role in periods of disturbance and recovery of these Mediterranean ecosystems.  相似文献   

11.
Oak decline that was affecting three holm oak sites in the province of Huelva (south‐western Spain) was studied during 1998–1999. The syndromes of dieback and sudden death have been observed and, in both cases, foliar symptoms were associated with root rot. Characterization of the fungal isolates from necrotic roots led us to identify Phytophthora cinnamomi A2 as consistently associated with the disease. The optimum growth temperatures of these isolates were very high (30°C). Inoculation tests under controlled conditions demonstrated the pathogenicity of the isolates on holm and cork oak seedlings. None of the other biotic factors of Mediterranean oak decline that have been previously described were found in the present study and so, in this case, the forest decline model does not seem to be necessary in order to explain the disease observed. The defoliation and mortality of the oaks was primarily caused by P. cinnamomi, although some abiotic factors such as alternating periods of drought and wet weather in the region may play an important role.  相似文献   

12.
Modern alley cropping designs, with trees aligned in rows and adapted to operating farming machinery, have been suggested for Europe. This paper explores the potential for adoption of cork oak (Quercus suber L.) agroforestry in Portugal and estimates the potential carbon sequestration. Spatial modeling and Portuguese datasets were used to estimate target areas where cork oak could grow on farmland. Different implementation scenarios were then modeled for this area assuming a modern silvoarable agroforestry system (113 trees ha?1 thinned at year 20 for establishing 50 trees ha?1). The YieldSAFE process-based model was used to predict the biomass and carbon yield of cork oak under low and high soil water holding capacity levels. Approximately 353,000 ha are available in Portugal for new cork oak alley cropping. Assuming implementation rates between 10 % of the area with low soil water capacity (60 mm: 15 cm depth, coarse texture) and 70 % of the area with high soil water holding capacity (1,228 mm: 200 cm depth, very fine texture), then carbon sequestration could be 5 × 106 and 123 × 106 Mg CO2 respectively. Due to higher yields on more productive land, scenarios of limited implementation in high productivity locations can sequester similar amounts of carbon as wide implementation on low productivity land, suggesting that a priori land classification assessments can improve the targeting of land and financial incentives for carbon sequestration.  相似文献   

13.
This study reports a parametric approach to the climatic and edaphoclimatic potential distribution of the cork oak (Quercus suber L.) in central-western Spain together with an analysis of the influence of the maximum soil water holding capacity (WHC) on such potential distribution. To these ends, we employed 12 climatic and 2 edaphoclimatic parameters of eco-physiological influence derived from the current distribution of cork oaks. The climatic and edaphoclimatic parameters elaborated for two extreme WHC values (50 and 250 mm) are calculated for the whole study area and are mapped by means of a digital elevation model and a geographic information system. The results point to an important climatic potential area for high soil WHC values but there is also a remarkable dependence on this latter parameter, mainly in the Duero basin, since the limits of the climatic potential area are reduced strongly as WHC decreases. We deduce certain other conclusions as regards the importance of this variable in the potential distribution of species and in forestation and reforestation projects using this species.  相似文献   

14.
The effect of shoot pruning on leaf phenology, stem wood anatomy and sap flow was investigated on Senna spectabilis (DC.) Irwin and Barneby in Machakos, Kenya. Unpruned trees (single stem) were compared to hedges (two to four stems), pruned 4 times a year during two rainy seasons (April–June, 1997 and November, 1997–January, 1998) separated by a dry season (July–October 1997). Trees attained peak leaf area of 55 m2 plant−1 during the rainy seasons, and shed all their leaves naturally during the dry season. Maximum hedge leaf area was 4 m2 plant−1 between pruning events and 5.2 m2 plant−1 during the dry season. Pruning induced multiple stems and narrow xylem vessels with low hydraulic conductivity. Average cross sectional area of conducting wood per plant was at least 1.8 times greater in trees than in hedges. Xylem lumen diameter at 5 mm depth below the cambium was significantly (P < 0.001) larger in trees (53.6 ± 6.21 μm) than that in hedges (36.2 ± 8.21 μm). Maximum sap flow occurred in the wet season for trees (4800 g d−1 plant−1) and in the dry season for hedges (1400 g d−1 plant−1). Wet season pruning suppressed crown expansion and modified the natural phenology of senna, reducing transpiration rate and therefore soil water depletion, causing crowns to grow. This enhanced the ecological combining ability of senna managed as hedges with annual crops.  相似文献   

15.
Enhancement of Juniperus thurifera recruitment and colonisation by oak and pine species has been related at the local level to changes in livestock pressure. We used forest inventory data from Castilla y León Autonomous Region (Central Spain), an area comprising 34% of the world range of J. thurifera, to assess whether this process is occurring at a larger scale. We compared tree composition and density in a set of 659 permanent plots over a 10-year period. Logistic models and redundancy analysis were used to assess the effect on this process of parameters such as livestock pressure, propagule availability and climatic conditions. Between 1992 and 2002, juniper woodlands became denser (1.31% juniper stem year−1) and tree diversity increased due to rapid colonisation by oaks and pines (2.21% occupied plots year−1). In addition, the presence of juniper increased in other types of forests at a moderate rate (0.6% y−1). Thus, we observed both a disruption of the borders between current forest types and a generalised increase in α-diversity of tree species. The seed source was the main factor explaining colonisation rate, suggesting that the pace of colonisation is critically constrained by the spatial configuration of the landscape and the local propagule availability of the colonising species. If the current colonisation trends continue, monospecific juniper woodlands will become very scarce by the end of the twenty-first century.  相似文献   

16.
Differences of raw cork quality, in terms of thickness and porosity, were observed in productive cork oak (Quercus suber L.) stands in the Nebrodi and Iblei mountains of Sicily in relation to stand density. Five study areas were chosen across a range of different stand density satisfying specific sampling requirements among two managed cork oak woods.Analysis of variance using Fisher–Snedecor‘s F test (p < 0.05) were used to identify statistically significant differences of cork quality and sylvicultural, dendrometric and cork stripping parameters between study areas within each stand. Relationships between cork quality and sylvicultural and dendrometric parameters were also tested using Pearson's correlation coefficient (r). Results shown that sylvicultural practices are a key factor influencing cork quality: statistically significant differences in cork thickness and crown area were observed between areas at different stand density; positive correlations were found between cork thickness and crown area in lower density study areas favouring a significant vegetative activity; negative correlations were found between parameters of cork stripping (cork stripping coefficient, cork stripping surface, maximum height of cork stripping) and cork thickness. No correlations were found between cork porosity and dendrometric or sylvicultural parameters, demonstrating the probable genetic origin of cork porosity. Results shown that cork quality parameters and stand attributes may be used in sustainable management models of cork oak forests.  相似文献   

17.
Mass mortality of Fagacean tree species caused by Raffaelea quercivora has occurred widely in Japan. Because conidia or other propagules of the pathogen have not been found in infected trees, pathogen spread is assumed to occur primarily by hyphae. To clarify the relationship between hyphal growth of the pathogen within trees and their vessel arrangements, we examined two native Japanese oaks, Quercus crispula and Quercus glauca, and three exotic American oaks, Quercus coccinea, Quercus palustris and Quercus rubra. Quercus glauca is a radial‐porous species, whereas the other four species have a ring‐porous wood structure. Hyphal growth within inoculated potted living seedlings and in cut, sterilized stem segments of these species was examined microscopically after fungal inoculation. Water conductance in the seedlings was examined using transverse stem sections. The proportion of non‐conductive sapwood in Q. crispula, Q. coccinea and Q. palustris differed between inoculation and control treatment, being much higher in inoculated seedlings. The proportions were positively correlated with the extent of the hyphal growth. In sterilized stem segments, the extent of fungal colonization varied among the foreign ring‐porous species Q. coccinea, Q. palustris and Q. rubra. It is hypothesized that the extent of colonization by R. quercivora reflects the extent of non‐conductive sapwood irrespective of tree species, but is little affected by vessel arrangements.  相似文献   

18.
Wood characteristics vary from pith to bark and this can influence the final use. These variations can be related to the effects of plantation management. The radial variation in fiber cells, vessel elements, and ray cells was investigated for a commercial and fast-grown species, the rubberwood (Hevea brasiliensis), at varying stocking densities. Nine-year-old trees of two new clones (RRIM 2020 and RRIM 2025) were categorized into four stocking densities of 500, 1000, 1500, and 2000 trees ha?1. The sample blocks were anatomically analyzed to determine the changes in wood cells from pith to bark. The results generally showed a centrifugal increase in fiber features, vessel diameter, ray height, and ray area. Vessel density and ray density showed a decreasing trend. Vessel areas revealed a radial irregular variation. The ray area showed a striking relationship with ray density and ray height. Ray cell pattern indicated enough variation for visual approval to ensure within and between stocking density changes. Most radial variation was explained by the effect of cambial age. Owing to different stem width and growth rates, the mean cell features were not at the same radial distances from the pith.  相似文献   

19.
SAVILL  P. S.; MATHER  R. A. 《Forestry》1990,63(4):355-362
Previous work by Savill (1986) has shown that oak trees (Quercusrobur and Q. petraea) with large earlywood vessels appear tohave a much greater predisposition to shake than trees withsmaller vessels. The aim of the investigation described herewas to determine whether there are any externally visible characteristicscorrelated with vessel size, so that shake-prone trees can berecognized in the field. It was found that trees that flushlatest within a population tend to have the biggest vessels.Possible reasons for this correlation are discussed briefly.The finding has the practical value that oaks which are predisposedto shake can be marked at flushing time and removed in thinningoperations.  相似文献   

20.
The purpose of this study was to investigate the sorption of selected volatile substances from oak wood-chip samples (Quercus pyrenaica Willd. and Quercus petraea L.) subjected to different toasting levels, namely, without toasting, with medium toasting, and with strong toasting, through the use of solid-phase microextraction (SPME). The main volatile compounds identified as a function of the toasting level and botanical species were furfural, hexanal, α-pinene, d-limonene, decanal, vitispirane, ethyl hexanoate, cis-3-methyl-γ-octalactone (“oak lactone” or “whisky lactone”), α-terpineol, p-xylene, and nonanal. Considering the data obtained from the toasted woods (medium and strong intensity) in comparison with those of nontoasted woods, it can be pointed out that the average peak area and the number of compounds identified in the gas chromatogram decreased during the toasting process. In general, regarding the compounds analyzed, quantitative differences were found between the two oak wood species under study. High values of volatile compounds were found in Quercus pyrenaica oak wood chips. In addition, for the number of compounds identified in oak wood extracts and directly extracted from solid oak wood chips by SPME, it is concluded that the best extraction process for volatile compounds from oak wood is the use of oak wood-chip liquid extracts.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号