共查询到20条相似文献，搜索用时 310 毫秒
1.
Grooves a few nanometers wide can be formed on a Si(111) surface with a scanning tunneling microscope when the tip is above a critical voltage. This may provide a promising approach to nanodevice fabrication. The dependence of the critical voltage on tunneling current, tip polarity, and tip material was studied with silver, gold, platinum, and tungsten tips. The results are consistent with field emission of positive and negative silicon ions. The variation of critical voltage with current is explained quantitatively by a simple tunneling equation that includes the effect of the contact potential between tip and sample. 相似文献
2.
RP Andres T Bein M Dorogi S Feng JI Henderson CP Kubiak W Mahoney RG Osifchin R Reifenberger 《Science (New York, N.Y.)》1996,272(5266):1323-1325
Double-ended aryl dithiols [alpha,alpha'-xylyldithiol (XYL) and 4,4'-biphenyldithiol] formed self-assembled monolayers (SAMs) on gold(111) substrates and were used to tether nanometer-sized gold clusters deposited from a cluster beam. An ultrahigh-vacuum scanning tunneling microscope was used to image these nanostructures and to measure their current-voltage characteristics as a function of the separation between the probe tip and the metal cluster. At room temperature, when the tip was positioned over a cluster bonded to the XYL SAM, the current-voltage data showed "Coulomb staircase" behavior. These data are in good agreement with semiclassical predictions for correlated single-electron tunneling and permit estimation of the electrical resistance of a single XYL molecule (approximately18 ± 12 megohms). 相似文献
3.
We have measured the angular dependence of chemical bonding forces between a carbon monoxide molecule that is adsorbed to a copper surface and the terminal atom of the metallic tip of a combined scanning tunneling microscope and atomic force microscope. We provide tomographic maps of force and current as a function of distance that revealed the emergence of strongly directional chemical bonds as tip and sample approach. The force maps show pronounced single, dual, or triple minima depending on the orientation of the tip atom, whereas tunneling current maps showed a single minimum for all three tip conditions. We introduce an angular dependent model for the bonding energy that maps the observed experimental data for all observed orientations and distances. 相似文献
4.
We studied the dynamics of a single cobalt (Co) atom during lateral manipulation on a copper (111) surface in a low-temperature scanning tunneling microscope. The Co binding site locations were revealed in a detailed image that resulted from lateral Co atom motion within the trapping potential of the scanning tip. Random telegraph noise, corresponding to the Co atom switching between hexagonal close-packed (hcp) and face-centered cubic (fcc) sites, was seen when the tip was used to try to position the Co atom over the higher energy hcp site. Varying the probe tip height modified the normal copper (111) potential landscape and allowed the residence time of the Co atom in these sites to be varied. At low tunneling voltages (less than approximately 5 millielectron volts), the transfer rate between sites was independent of tunneling voltage, current, and temperature. At higher voltages, the transfer rate exhibited a strong dependence on tunneling voltage, indicative of vibrational heating by inelastic electron scattering. 相似文献
5.
Artificial nanostructures, each composed of a copper(II) phthalocyanine (CuPc) molecule bonded to two gold atomic chains with a controlled gap, were assembled on a NiAl(110) surface by manipulation of individual gold atoms and CuPc molecules with a scanning tunneling microscope. The electronic densities of states of these hybrid structures were measured by spatially resolved electronic spectroscopy and systematically tuned by varying the number of gold atoms in the chains one by one. The present approach provides structural images and electronic characterization of the metal-molecule-metal junction, thereby elucidating the nature of the contacts between the molecule and metal in this junction. 相似文献
6.
An electrodeposition technique is described that produces atomically flat epitaxial metal overlayers of quality similar to that obtained by ultrahigh vacuum techniques at elevated temperature. In this approach, a metal of interest such as silver is co-deposited with a reversibly deposited mediator metal. The mediator is periodically deposited and stripped from the surface, and this serves to significantly increase the density of two-dimensional islands of silver atoms, promoting a layer-by-layer thin-film growth mode. In situ scanning tunneling microscopy was used to demonstrate the growth process for the heteroepitaxial system silver/gold (111) with either lead or copper as the mediator. 相似文献
7.
Berndt R Gaisch R Gimzewski JK Reihl B Schlittler RR Schneider WD Tschudy M 《Science (New York, N.Y.)》1993,262(5138):1425-1427
The tip-surface region of a scanning tunneling microscope (STM) emits light when the energy of the tunneling electrons is sufficient to excite luminescent processes. These processes provide access to dynamic aspects of the local electronic structure that are not directly amenable to conventional STM experiments. From monolayer films of carbon-60 fullerenes on gold(110) surfaces, intense emission is observed when the STM tip is placed above an individual molecule. The diameter of this emission spot associated with carbon-60 is approximately 4 angstroms. These results demonstrate the highest spatial resolution of light emission to date with a scanning probe technique. 相似文献
8.
Carbon monoxide molecules were arranged in atomically precise configurations, which we call "molecule cascades," where the motion of one molecule causes the subsequent motion of another, and so on in a cascade of motion similar to a row of toppling dominoes. Isotopically pure cascades were assembled on a copper (111) surface with a low-temperature scanning tunneling microscope. The hopping rate of carbon monoxide molecules in cascades was found to be independent of temperature below 6 kelvin and to exhibit a pronounced isotope effect, hallmarks of a quantum tunneling process. At higher temperatures, we observed a thermally activated hopping rate with an anomalously low Arrhenius prefactor that we interpret as tunneling from excited vibrational states. We present a cascade-based computation scheme that has all of the devices and interconnects required for the one-time computation of an arbitrary logic function. Logic gates and other devices were implemented by engineered arrangements of molecules at the intersections of cascades. We demonstrate a three-input sorter that uses several AND gates and OR gates, as well as the crossover and fan-out units needed to connect them. 相似文献
9.
Zhao A Li Q Chen L Xiang H Wang W Pan S Wang B Xiao X Yang J Hou JG Zhu Q 《Science (New York, N.Y.)》2005,309(5740):1542-1544
We report that the Kondo effect exerted by a magnetic ion depends on its chemical environment. A cobalt phthalocyanine molecule adsorbed on an Au111 surface exhibited no Kondo effect. Cutting away eight hydrogen atoms from the molecule with voltage pulses from a scanning tunneling microscope tip allowed the four orbitals of this molecule to chemically bond to the gold substrate. The localized spin was recovered in this artificial molecular structure, and a clear Kondo resonance was observed near the Fermi surface. We attribute the high Kondo temperature (more than 200 kelvin) to the small on-site Coulomb repulsion and the large half-width of the hybridized d-level. 相似文献
10.
A method for confining electrons to artificial structures at the nanometer lengthscale is presented. Surface state electrons on a copper(111) surface were confined to closed structures (corrals) defined by barriers built from iron adatoms. The barriers were assembled by individually positioning iron adatoms with the tip of a 4-kelvin scanning tunneling microscope (STM). A circular corral of radius 71.3 A was constructed in this way out of 48 iron adatoms. Tunneling spectroscopy performed inside of the corral revealed a series of discrete resonances, providing evidence for size quantization. STM images show that the corral's interior local density of states is dominated by the eigenstate density expected for an electron trapped in a round two-dimensional box. 相似文献
11.
The nature and control of individual metal atoms on insulators are of great importance in emerging atomic-scale technologies. Individual gold atoms on an ultrathin insulating sodium chloride film supported by a copper surface exhibit two different charge states, which are stabilized by the large ionic polarizability of the film. The charge state and associated physical and chemical properties such as diffusion can be controlled by adding or removing a single electron to or from the adatom with a scanning tunneling microscope tip. The simple physical mechanism behind the charge bistability in this case suggests that this is a common phenomenon for adsorbates on polar insulating films. 相似文献
12.
Klimov NN Jung S Zhu S Li T Wright CA Solares SD Newell DB Zhitenev NB Stroscio JA 《Science (New York, N.Y.)》2012,336(6088):1557-1561
We determined the electromechanical properties of a suspended graphene layer by scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) measurements, as well as computational simulations of the graphene-membrane mechanics and morphology. A graphene membrane was continuously deformed by controlling the competing interactions with a STM probe tip and the electric field from a back-gate electrode. The probe tip-induced deformation created a localized strain field in the graphene lattice. STS measurements on the deformed suspended graphene display an electronic spectrum completely different from that of graphene supported by a substrate. The spectrum indicates the formation of a spatially confined quantum dot, in agreement with recent predictions of confinement by strain-induced pseudomagnetic fields. 相似文献
13.
A combination of chemical vapor deposition and scanning tunneling microscopy techniques have been used to produce nanometer-scale, iron-containing deposits with high aspect ratios from an iron pentacarbonyl precursor both on a substrate and on the tunneling tip itself. The structure and composition of the resulting nanodeposits were determined by transmission electron microscopy and high spatial resolution Auger electron spectroscopy. Either polycrystalline, relatively pure, body-centered-cubic iron or disordered carbon-rich material can be deposited, depending on the bias conditions of the tip sample junction and the precursor pressure. Two mechanisms of decomposition are inferred from the growth phenomenology. 相似文献
14.
The platinum-rhodium tip of a scanning tunneling microscope that operates inside of an atmospheric-pressure chemical reactor cell has been used to locally rehydrogenate carbonaceous fragments deposited on the (111) surface of platinum. The carbon fragments were produced by partial dehydrogenation of propylene. The reactant gas environment inside the cell consisted of pure H(2) or a 1:9 mixture of CH(3)CHCH(2) and H(2) at 300 kelvin. The platinum-rhodium tip acted as a catalyst after activation by short voltage pulses. In this active state, the clusters in the area scanned by the tip were reacted away with very high spatial resolution. 相似文献
15.
Mo YW 《Science (New York, N.Y.)》1993,261(5123):886-888
The scanning tunneling microscope (STM) was used to control the configuration of antimony clusters on the (001) surface of silicon. In particular, the STM tip induced a reversible rotation between two orthogonal orientations of individual antimony dimers on the surface. This simple rotation can be explained by an atomic-scale torque exerted on the antimony dimers by the STM tip. The reversibility of this process could provide a basis for making atomic-scale memory cells. 相似文献
16.
Negative differential resistance (NDR) is the essential property that allows fast switching in certain types of electronic devices. With scanning tunneling microscopy (STM) and scanning tunneling spectroscopy, it is shown that the current-voltage characteristics of a diode configuration consisting of an STM tip over specific sites of a boron-exposed silicon(111) surface exhibit NDR. These NDR-active sites are of atomic dimensions ( approximately 1 nanometer). NDR in this case is the result of tunneling through localized, atomic-like states. Thus, desirable device characteristics can be obtained even on the atomic scale. 相似文献
17.
Krause S Berbil-Bautista L Herzog G Bode M Wiesendanger R 《Science (New York, N.Y.)》2007,317(5844):1537-1540
Switching the magnetization of a magnetic bit by injection of a spin-polarized current offers the possibility for the development of innovative high-density data storage technologies. We show how individual superparamagnetic iron nanoislands with typical sizes of 100 atoms can be addressed and locally switched using a magnetic scanning probe tip, thus demonstrating current-induced magnetization reversal across a vacuum barrier combined with the ultimate resolution of spin-polarized scanning tunneling microscopy. Our technique allows us to separate and quantify three fundamental contributions involved in magnetization switching (i.e., current-induced spin torque, heating the island by the tunneling current, and Oersted field effects), thereby providing an improved understanding of the switching mechanism. 相似文献
18.
Spatial resolution at the atomic scale has been achieved in the coupling of light to single molecules adsorbed on a surface. Electron transfer to a single molecule induced by green to near-infrared light in the junction of a scanning tunneling microscope (STM) exhibited spatially varying probability that is confined within the molecule. The mechanism involves photo-induced resonant tunneling in which a photoexcited electron in the STM tip is transferred to the molecule. The coupling of photons to the tunneling process provides a pathway to explore molecular dynamics with the combined capabilities of lasers and the STM. 相似文献
19.
Hirjibehedin CF Lin CY Otte AF Ternes M Lutz CP Jones BA Heinrich AJ 《Science (New York, N.Y.)》2007,317(5842):1199-1203
Magnetic anisotropy allows magnets to maintain their direction of magnetization over time. Using a scanning tunneling microscope to observe spin excitations, we determined the orientation and strength of the anisotropies of individual iron and manganese atoms on a thin layer of copper nitride. The relative intensities of the inelastic tunneling processes are consistent with dipolar interactions, as seen for inelastic neutron scattering. First-principles calculations indicate that the magnetic atoms become incorporated into a polar covalent surface molecular network in the copper nitride. These structures, which provide atom-by-atom accessibility via local probes, have the potential for engineering anisotropies large enough to produce stable magnetization at low temperatures for a single atomic spin. 相似文献
20.
We have measured the quantum yield for exciting the motion of a single Co atom in CoCu(n) linear molecules constructed on a Cu(111) surface. The Co atom switched between two lattice positions during electron excitation from the tip of a scanning tunneling microscope. The tip location with highest probability for inducing motion was consistent with the position of an active state identified through electronic structure calculations. Atom motion within the molecule decreased with increased molecular length and reflected the corresponding variation in electronic structure. 相似文献