首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
春风吹绿嫩树芽。我国有不少木本蔬菜,如香椿芽、柳树芽、枸杞芽、树头菜、桑叶芽、漆树芽、槐树芽等等,它们以芽为主体,有的还带了嫩绿的短枝,不仅味道鲜美,而且大多对人体健康大有裨益。这些树上佳蔬,才是最佳的纯天然的绿色食品。 香椿芽  为椿科乔木,香椿的嫩芽,常带有短嫩枝。香椿芽有一种特殊的香味,是营养价值很高的蔬菜,它含有丰富的蛋白质、维生素C、钙、磷、铁等矿物质。我国人民食用香椿芽开始于汉代,已有2000多年的历史了。香椿芽食用方法方便,可以单吃,也可以生拌豆腐,配炒鸡蛋、或油炸香椿鱼、腌咸菜等…  相似文献   

2.
香椿生物学起点温度的研究   总被引:3,自引:0,他引:3  
通过对香椿的休眠期、生物学起点温度及解除休眠的试验研究发现:香椿落叶后有17天的生理低温休眠期;生物学起点温度为8.3℃;顶芽解除休眠完成芽萌动需要的有效积温为234℃,从芽萌动到采芽需要的有效积温为165℃。根据这一结果进行栽培,可以提高香椿芽的产量。  相似文献   

3.
研究了矮化香椿园中采芽时期和采芽长度对香椿品质的影响。为便于分析,将测定结果归纳为3类指标:外观、口感和其他营养成分。研究表明,春季(4~7月)采芽,各项指标均优于秋季(9月)。春季第1茬芽的品质最好,但第2、3茬芽的品质降低较少。从品质和产量综合考虑,春季采芽长度以10~15cm为宜。秋季(9月),各项指标急剧降低,为确保枝条安全越冬,已不适于采芽。  相似文献   

4.
日光温室栽培香椿芽新技术韩鸿声,孙蕾(山东省林科所,济南,250014)山东省林科所研究成功的“日光温室栽培香椿新技术”,严冬依靠太阳热增温生产香椿芽,每平方米生产鲜椿芽4.5~6.15kg,纯收入90~160元,投入产出比约为1:5~7。鲜椿芽元旦...  相似文献   

5.
在保定郊区建立4种密度的香椿矮化密植园,根据4年的研究,1~4年内以最高密度(3.8株/m2)和高密度(2.5株/m2)的产芽量最高,第4年采完芽后,对最高密度应进行疏伐,保留2.5株/m2;中密度(1.74株/m2)和低密度(0.83株/m2)5~10年内可以不疏伐。结合采芽进行两种方式的整形,即矮干多侧枝型和灌丛型。前者的总产量较高,且可提早1年采芽。采芽3年后,两种整形方式的年产量已无显著差异。采芽与整形相结合,可以促进侧枝和树冠的形成。但是,高密度严重抑制侧枝形成和存活,以至不能形成树冠。矮化密植香椿园第3年的产芽量最高可达5200kg/hm2,年均纯收益为38940元/hm2。  相似文献   

6.
日光温室栽培香椿新技术依据树木生理学和栽培学原理,设计并建造了新型日光温室,在室内建造酿热温床和海绵田,进行了香椿教培试验。总结出了一整套香椿密植、促进侧芽生长、提高香椿芽产量的配合技术措施。采用水技术栽植香椿生产香椿芽,平均每平方米温室面积可采收香椿芽1.8~6.15kg,最高可达7.43kg/m2,投入产出比为1:4.97~7.2O。完成单位:山东省林科所北方地区大棚工厂化容器育苗配套换术该成果研制出容器苗生产主要作业工序所需的配套设备。实现了基质粉碎、搅拌、填装、播种、复上的机械化苗木生态环境调控的自动化,容器…  相似文献   

7.
《河南林业科技》1994,(3):44-44
苹果自由纺锤形树冠成形技术定植时采用一级苗,定干高度70~80cm。当年萌头后在树干40cm以上整形带内按主枝选留方位刻芽(或涂抽枝宝)5~6个。夏剪时选留3~4个新梢作主枝,拉枝呈70~80度,7月在当年主枝上刻芽(或涂抽枝宝),每枝刻12~15个...  相似文献   

8.
香椿(Toona sisesis(A.Juss)Roem.)别名香椿头和香椿芽,原产于中国,已有二千多年的栽培历史。《本草纲目》中指出香椿的叶、芽、根、皮和果实均可人药,我国民间有“食用香椿不染杂病”的说法。香椿全身是宝,具有很高的材用价值、食用价值和药用价值。  相似文献   

9.
香椿芽蔬菜培育技术张发(河南省卢氏县潘河镇尤里卡特种繁育场472244)香椿是我国特有的树种,其嫩芽芳香味美,鲜食、炒食、腌制均清香可口。芽紫红色者称紫椿,芽绿色者,称绿椿。香椿芽及嫩叶,有收敛止血、去湿止痛、开窍止痢等功效,常食对人体健康有益,是地...  相似文献   

10.
香椿芽味美,营养丰富,为名贵佳肴,是人们喜爱的绿色木本蔬菜。近年来利用塑料大棚培育香椿使香椿提前采芽,多茬收获,在产量和经济效益上有较大幅度的提高。根据我们在华县辛庄乡几年的试验和调查研究,现将培育香椿技术介绍给大家。 育苗技术  相似文献   

11.

In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads.  相似文献   

12.

The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage.  相似文献   

13.
Contour hedgerows of multipurpose tree species in the sloping tea lands of Sri Lanka are expected to reduce soil erosion and also add significant amounts of plant nutrients to the soil via periodic prunings. The objective of this experiment was to characterize the biomass decomposition pattern and quantify the amount of nutrients added through prunings of six tree species (Calliandra calothyrsus, Senna spectabilis, Euphatorium innulifolium, Flemingia congesta, Gliricidia sepium and Tithonia diversifolia) currently being used in hedgerows associated with tea. Withered leaf and stem prunings (50 g) were enclosed in 2-mm litter bags, placed at 5-cm depth and retrieved after one, three, six, nine and 12 weeks. Loss of initial dry weight, N, P and K was measured. Single exponential decay function adequately described both dry weight and nutrient loss. Tree species differed significantly in their rate of breakdown with decomposition constants (k) varying from 0.0299 to 0.2006 week−1 for leaves and from 0.0225 to 0.0633 week−1 for stems. Gliricidia showed the highest k for leaves with the rest in the following descending order: Senna > TithoniaEuphatorium > Calliandra > Flemingia. A similar pattern was observed for loss of all nutrients with Calliandra and Flemingia always having lower k values than the rest. Although N immobilization was not observed, immobilization of P and K was observed during the first week of incubation in some species, particularly in stem prunings. Annual biomass of prunings differed significantly between tree species in the following descending order: Calliandra > Senna > Flemingia > Tithonia > Gliricidia > Euphatorium. Calliandra added the greatest amount of nutrients annually to the soil with Euphatorium adding the least. Calliandra prunings provided the annual total K requirement and 49% of the N requirement of mature tea. However, none of the species provided more than 5% of the P requirement. It is concluded that among the tree species tested, Calliandra and Flemingia are the most suitable for contour hedgerows in tea plantations of this agroclimatic region because of their higher soil nutrient enrichment capacity and slower decomposition rates which would minimize leaching losses. This revised version was published online in June 2006 with corrections to the Cover Date.  相似文献   

14.

The effects of seed weight and seed type on seedling growth of Pinus sylvestris (L.) were studied by seeding individually weighed orchard and stand seed in different mixtures under harsh (direct seeding in field) and optimal (seeding in nursery) conditions. In the nursery experiment an increase in the seed weight from 3 to 7 mg increased the seedling height by 10-27% and total weight by 27-113%, and decreased the height/diameter ratio by 5-6% after 2 yrs. With elimination of seed weight effects, orchard seedlings were 2% taller than stand seedlings in year 2. Without elimination of seed weight effects, orchard seedlings were 7-13% taller. In the field experiment an increase in the seed weight from 3 to 7 mg increased seedling height by 18-65%, stem volume by 81-274% and the number of top-buds by 23-34% in year 5. After elimination of seed weight effects, orchard seedlings were 7-13% taller than stand seedlings and without elimination of seed weight effects 20-21% taller after 5 yrs. Even after elimination of both seed weight and genetic effects orchard seedlings were 3-9% larger than stand seedlings in the field experiment. In conclusion, the influence of seed weight and seed type on growth traits and slenderness is highly significant and the influence seems to be greater in harsh conditions.  相似文献   

15.
Abstract

Wood in general and wooden studs in particular are often distorted owing to uneven shrinkage during the drying process in the sawmill. Twist is often the most detrimental of all types of distortion, and it is caused by spiral grain in combination with variations in moisture content. For sawmills, the objective is to produce dried, straight boards, and one method of dealing with boards with excessive spiral grain is to sort them out and then dry them in a pretwisted position to obtain straight boards after drying. A model using the finite element (FE) method for the simulation of drying twist distortions was first calibrated against laboratory experiments in which boards were dried with and without restraints and pretwists. After the calibration, the FE results were compared with industrial test results for boards that were dried without restraints or with restraints with zero pretwist, i.e. straight restraints. The FE model used an elastic–ideally plastic material model to obtain permanent deformations. The calibration was to set the yield stresses so that there was a good match between FE results and results from the laboratory experiments. The comparison between the industrial test results and the FE results showed that the FE model is capable of realistic simulations of drying boards with and without restraints and presumably also pretwists.  相似文献   

16.
Baobab leaves form an important part of the local diet in Sahel countries and elsewhere in Africa. Existing leaf nutritional data and agroforestry performance information are based solely on Adansonia digitata L., the baobab of continental Africa. The introduction potential of Adansonia species from the center of diversity in Madagascar and from Australia remains untapped. To assess this potential, the mineral contents and B1 and B2 vitamin levels of dried baobab leaves were determined for five-year old trees of A. digitata, A. gibbosa (A. Cunn.) Guymer ex D. Baum, A. rubrostipa Jum. & H. Perrier (syn. A. fony Baill.), A. perrieri Capuron and A. za Baill. grown in an introduction trial in Mali. Nutritional data were evaluated against survival and vigor to identify promising germplasm. Leaf vitamin and crude protein contents were highest in the Madagascar species, especially A. rubrostipa (B1 88 mg 100 g−1, B2 187 mg 100 g−1, protein 20.7% dry weight). However, the local species far outperformed the introductions in survival, tree height, basal diameter and resistance to termites. We suggest grafting as a way of harnessing the vigor of well-adapted local baobab varieties to the superior nutritional profiles of A. rubrostipa and others. Cross-species grafting tests in Adansonia were successful, thus creating new agroforestry possibilities with different scion/rootstock combinations.  相似文献   

17.
Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered.  相似文献   

18.

This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland.  相似文献   

19.

The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions.  相似文献   

20.
本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号