共查询到20条相似文献，搜索用时 62 毫秒
1.
为研究钢结构仿古建筑双梁柱中节点的抗震性能,对4个全焊双梁柱中节点进行了水平低周反复加载试验。通过观测试件在侧向力作用下的受力过程和破坏形态,分析双梁柱中节点的受力机理。根据梁截面形式的不同,将其分为箱型截面梁与工字型截面梁2类,依据仿古建筑独特的构造特点,将各试件节点核心区划分为上、中、下3个区域。通过量测各区域内的应变大小,分析该类结构节点核心区在侧向力作用下的受理机理及破坏模式,并建立双梁柱节点的斜压杆受力模型。试验结果表明：仿古建筑双梁柱节点的破坏形式主要为沿下核心区对角线的剪切破坏,并通过理论计算分析提出一种考虑轴压比与梁截面形式的双梁柱中节点抗剪承载力修正公式。 相似文献
2.
剪力连接件是保证GFRP混凝土组合梁/板中两种不同材料共同工作的重要构造,设计了矩形肋和T形肋两类GFRP肋式剪力连接件,进行了3组共8个GFRP肋式剪力连接件的推出试验,包括：矩形肋开孔、T形肋开孔、T形肋不开孔3组GFRP肋式剪力连接件,得到了其破坏形态、极限承载力、荷载滑移曲线及荷载应变变化规律,重点研究肋内开孔及肋的截面形式对GFRP肋式剪力连接件受力性能的影响。试验结果表明：GFRP肋式剪力连接件的破坏形态均为混凝土劈裂破坏;对比矩形肋开孔试件,T形肋开孔试件强度高、延性好;对比T形肋不开孔试件,T形肋开孔试件强度与延性均能提高。基于试验结果,建立了考虑肋内开孔及肋截面形式影响的GFRP肋式剪力连接件极限承载力计算公式,拟合得到了GFRP肋式剪力连接件的荷载滑移曲线上升段的理论模型,建立了其抗剪刚度计算公式。 相似文献
3.
通过对核心区应用X形配筋增强的高强钢筋异形柱边节点和同等条件下未被增强的高强钢筋异形柱边节点进行拟静力试验研究,对比分析异形柱边节点的破坏特征、滞回曲线、承载能力、位移及延性、刚度退化、耗能能力等抗震性能指标。研究结果表明,配置HRB500高强钢筋异形柱边节点比配置600 MPa级的边节点承载能低,但滞回性能好,变形能力强,刚度退化推迟,耗能能力强;在核心区加入X形配筋,均可以改善高强钢筋异形柱边节点的破坏特征,使边节点抗剪能力、变形能力、耗能能力增强,刚度退化推迟,提高异形柱边节点抗震性能,配置HRB500高强钢筋的试件核心区应用X形配筋加强后抗震性能提高效果更好。 相似文献
4.
依据现场大型剪切试验和室内直剪试验,研究了固结煤矸石的抗剪强度特性。试验剪应力-剪位移过程曲线表明,一定含水率条件下的固结煤矸石呈现明显的粘塑性体力学特性。以现场大型剪切试验煤矸石作为试样配料进行了室内直剪试验,分析了含水率和密实度对良好固结煤矸石试样剪应力-剪位移试验曲线以及抗剪强度参数的影响,在此基础上探讨了试样内煤及其它细颗粒的状态变化对固结煤矸石抗剪强度的弱化作用机理,最后对比分析了现场大型剪切试验抗剪强度参数值和室内直剪试验抗剪强度参数值的差异及其产生的主要原因。 相似文献
5.
钢筋混凝土无腹筋细长梁剪切破坏机理模型研究综述 总被引：1，自引：0，他引：1
根据现有关于钢筋混凝土无腹筋细长梁剪切破坏机理问题的研究成果,介绍了基于修正压力场理论的抗剪模型、临界剪切裂缝理论、塑性理论、压力路径理论、劈裂破坏理论和基于截面应变分析的抗剪模型的基本假设、核心观点及受剪承载力计算方法,并给出总结、归纳及评析;另一方面,利用相关试验数据和ACI-DAfStb无腹筋细长梁剪切破坏数据库,分别对不同理论模型的受剪承载力计算公式进行了设计参数的影响评估和统计评估;并展望了无腹筋细长梁剪切破坏机理研究的发展方向。研究结果表明：不同理论模型的部分假设缺少直接的试验依据支持,梁腹混凝土的受拉（劈裂）或受剪（骨料咬合）以及受压区混凝土对抵抗剪力的贡献成为抗剪机制的主要分歧;不同受剪承载力计算公式对不同影响因素的考虑方式的合理性和计算结果的准确度均有待进一步提高。后续深入研究应综合考虑剪切破坏问题的随机性和物理属性,利用先进测试技术、应力演化分析方法,进一步揭示剪切破坏机理。 相似文献
6.
为了研究混杂纤维喷射混凝土的弯曲韧性,采用不同掺量的钢纤维和聚丙烯纤维混杂以及高炉微粉复合超叠加的方法制备600 mm×600 mm×100 mm混杂纤维喷射混凝土方板并置于刚性支撑架上,选用等位移控制对方板进行中心加载。通过生成的荷载挠度曲线及对其进行积分所得的能量吸收值综合评价各组方板的弯曲韧性,同时,通过破坏过程评价各板裂缝控制能力。试验结果表明：掺入1.2%钢纤维和0.11%聚丙烯纤维的喷射板试件的弯曲韧性优于掺入0.8%钢纤维和0.11%聚丙烯纤维的喷射板,其最大峰值荷载提高了18%,板中心挠度至25 mm时的能量吸收值也提高了25.6%;对于仅掺入0.8%单一钢纤维的板,混杂了0.11%聚丙烯纤维后,两种纤维间的正混杂效应使得板中心挠度至25 mm时的能量吸收值提高了28.5%;高炉微粉掺量的增加能提高混杂纤维喷射混凝土板的弯曲韧性;混杂纤维喷射混凝土板均展现出了良好的裂缝控制能力,板整体呈现裂而不断的延性破坏。 相似文献
7.
焊接加固热作用对工形截面压弯钢构件承载性能的影响 总被引：1，自引：0，他引：1
为研究焊接加固热作用及不同初始负载对工字形压弯钢柱承载性能的影响,基于考虑热影响的热结构耦合分析方法进行了热源模型热输入改进,并考虑初始几何缺陷、初始残余应力及摩擦等,完成了不同负载下焊接加固的3个工字形压弯钢柱的模拟分析。研究了焊接位移时程、腹板应力应变重分布及荷载位移关系,通过有限元分析与相应试验结果对比验证,进而获得了试验无法获得的焊接温度场、翼缘与加固板间的焊接应力应变重分布以及翼缘边缘屈服承载力等结果,并将承载力结果与规范计算结果对比,考察了现有设计方法。结果表明,焊接顺序决定焊接变形的发展过程,焊接热输入和初始负载共同决定持载焊接的位移变化范围和焊接残余变形的大小;初始负载越大,应力应变重分布往偏心受力方向发展更多,承载力越低,而初始残余应力不影响极限承载力;采用考虑热影响的有限元方法具有一定可行性和总体安全性,规范设计方法仍有可提升空间。 相似文献
8.
利用相似材料模拟高速铁路隧道基底软岩,采用荷载控制和非对称正弦波循环加载方式对软岩试件进行动三轴疲劳与损伤检测综合试验。通过试验结果分析,建立了软岩3参数多项式疲劳寿命计算模型和4参数多项式累积损伤参量计算模型,获得了软岩疲劳损伤特性,即：软岩疲劳破坏表现为端部拉-剪复合破坏和中部压-剪复合破坏两种模式;疲劳破坏全过程表现为初始微孔隙压密、裂纹发生与稳定扩展以及损伤裂纹加速发展3个发展阶段;软岩疲劳寿命主要取决于本身强度和动应力水平,强度愈高、动力应力水平愈低,其疲劳寿命就越长;当动应力水平相同时,软岩疲劳寿命与其弹性模量呈线性增长关系。 相似文献
9.
10.
页岩烧结保温砌块砌体基本力学性能试验研究 总被引：1，自引：0，他引：1
通过对页岩烧结保温砌块砌体轴心抗压、沿通缝抗剪、剪压复合抗剪性能试验研究,分析其破坏特征和破坏机理。试验结果表明:页岩烧结保温砌块砌体受压破坏时,在竖向灰缝附近形成主裂缝,接近极限荷载时砌体出现表皮剥落现象;沿通缝抗剪破坏模式主要为单剪破坏,脆性明显;剪压破坏有剪磨、剪压和斜压3种类型;实测轴心抗压强度平均值高于规范值,沿通缝抗剪强度、复合抗剪强度平均值低于计算值,并分别给出砌体轴心抗压强度平均值、抗剪、剪压复合受力抗剪强度平均值建议公式;剪压复合抗剪强度随着压应力的增大而增大;建立了页岩烧结保温砌块砌体受压应力应变关系表达式;给出该类砌块的弹性模量和泊松比的建议值。 相似文献
11.
12.
On basis of the experiment on sixteen high strength concrete columns, their shear behaviors are analysed. The effects of shear-span ratio and axial compression ratio on failure behavior, cracking shear and shear strength are analysed. The authors have discussed the suitability of the design equations for shear strength in the code. This experimental study on shear strength of high strength concrete frame columns is the first one in this field at home and the results can be served as reference for the code of high strength concrete design. 相似文献
13.
On the basis of a statical test of 16 specimens of coupling beams in shear walls,which consist of 10 specimens with ordinary rinforcement and 6 specimens with composite reinforce-ment,the statical behaviors of the coupling beams with two different types of reinforcement arestudied.It is concluded that the flexural strength 0f the beam should be multiplied by a reductionfactor when the span-depth ratio is less than 2,and the shear strength is not influenced by the span-depth ratio and may be obtained with unified calculation formula. 相似文献
14.
The effect of gravel content and shape on shear strength of sand-gravel mixtures was investigated through a series of direct shear tests under different stress states (σ = 50,100,150 and 200 kPa) in laboratory. Mixtures were made up of sand with rounded and angular gravels, respectively. The gavel contents of 20%, 40%, 60% and 80% were used in sample preparation. The results indicate that the dilatancy and shear strength of sand-gravel mixture increase with increasing gravel content and irregular degree of gravel shape. The gravel content has a more visible effect on the shear strength rather than that of the gavel shape. The minimum void ratio of the mixture is a characteristic parameter to investigate the relationship between gravel content & shape and the shear strength of sand-gravel mixture. 相似文献
15.
On the basis of available testing data of simply supported reinforced concrete beams without web reinforcement under two-point concentrated loads,the dominant factors contributing to shear performance are identified,and the basic laws are correspondingly quantitatively described.The shear design equations of China Design Code of Reinforced Concrete Structures,ACI Code,together with two other expressions of shear of RC beams without web reinforcement,are thus calibrated to identify their accuracy in describing the shear mechanism of such members. 相似文献
16.
Aiming at evaluating the effects of vibration history on dynamic characteristics of normally consolidated clay, a series of multi-cycled cyclic shear tests were conducted on 16 soil samples under consolidation pressure of 50 kPa, 100 kPa, 300 kPa and 500 kPa respectively. The experimental results reveal that, on the stage of drainage and consolidation, with the development of duration shear modulus curve ascends while damping curve descends; this trend became significant as consolidation pressure increased. The variation tends to be stable in 25 hours. When subjected to cyclic loading controlled by constant strain amplitude, both the modulus and damping of soil samples change significantly during the first 50 cycles, and then the differences become moderate afterwards, in which the damping curve acts in hyperbolical type. It is also found that there exists a clear sign of pre-straining that affects damping more significantly than modulus. 相似文献
17.
Negative shear property of soil-concrete interface is one critical issue in civil engineering. According to negative simple shear tests of soil-concrete interfaces with various water content, quantitative analysis on changes of shear strength, friction angle and cohesion force of negative sheared interface against positive shear experience were conducted. Several empirical formulae were proposed for above changes, and critical positive shear ratio was put forward. Based on improved stress-strain equation, mathematical model for tangent modulus of negative sheared soil-concrete interface was established. This new model consists ten parameters which can be determined by simple shear test. Process for determining these ten parameters was presented, and empirical values of them were obtained. Simulations for stress-strain curves of soil-concrete interface were carried out, and good ability of the model was found. 相似文献
18.
In order to ensure that the T shaped steel reinforced concrete short-pier shear wall ductile shear failure occurs, the failure mechanism on the basis of experimental research, using ANSYS finite element analysis software to simulate the failure mode. In the process of analysis considered the influence factors of horizontal steel reinforcement ratio, concrete strength, axial compression ratio and the content of steel. The results show: the level of reinforced volume reinforcement ratio, concrete strength and the content of steel can obviously change the the bearing capacity and ductility of components. 相似文献
19.
Effect of varying longitudinal reinforcement ratios on shear behavior of reinforced concrete simply supported beams without web reinforcement was analyzed in this paper, with emphasis on both shear ultimate capacity and failure mode, on the basis of available testing data. Generic laws were thus obtained and codified methods, including ACI Code and China Design Code of Reinforced Concrete Structures, were evaluated as a result. 相似文献
20.
A Study on the Response of Brick Masonry Structure under Dynamic and Static Shear-Compression Loading and Suggested Shearing Equation 总被引：1，自引：0，他引：1
Based on the studies and experiments of the responses of brick model under dynamic and static shear-compression loading, this paper brought forward an equation as a transition one for standard of masonry structure design in revision and the standard of aseismic building design. With its simple form, definite concept and similar calculation results in comparison with those obtained by equations from two standards, this equation has realized the correlation of the old and new ones. Besides it is rather save, so it has given a new advice for the revision of the standards. 相似文献