首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
《Southern Forests》2013,75(3):223-234
The aims and objectives of this study were to investigate the potential to predict laminated veneer lumber (LVL) stiffness from wood properties measured on trees and logs, and determine variation in log, wood and veneer properties as a function of tree height and age. Log selections were made from trees in three stands that were planned for harvesting at 14, 20 and 21 years of age. Rotary peeled veneer recovery from the logs was on average 65%. After drying, Metriguard testing showed over 50% of the veneer had an estimated dynamic modulus of elasticity (MOEdyn) above 12 GPa, with 20% above 14 GPa, and that veneer from the second log by tree height had higher MOEdyn values. In visual assessment to the AS/NZS 2269.0:2012 Standard, no veneer could be utilised in a panels face or subface positions and the older-age stand provided almost four times the volume of usable veneer. Standing-tree acoustic wave velocity (AWV) explained a moderate amount of variance in log MOEdyn and Pearson correlation coefficients between the (Metriguard) veneer MOEdyn, log AWV, log MOEdyn and disc basic density were significant, positive and strong, with log AWV explaining most of the observed variance in log stiffness. A moderately strong and positive linear regression existed between log AWV and veneer MOEdyn, supporting the use of log AWV tools for the ranking of stiffness in fibre-grown plantation E. nitens logs. Mechanical strength testing of LVL studs extracted from panels manufactured from the trial’s veneer indicated they equalled, and for some tested parameters exceeded, the characteristic design strength values previously published by commercial LVL manufacturers for equivalent size pine products.  相似文献   

2.
Abstract

This study assessed variation in modulus of elasticity of trees and logs of Scots pine (Pinus sylvestris) trees. The study used 192 sample trees (c. 90–150 years) selected from 24 clear-felling forests in central and southern Sweden. Modulus of elasticity (MOE) assessed with transit-time technology on standing tree stems at 0.5–2.0m on the southern and northern side of each tree varied from 8.6 to 17.6 GPa. No systematic MOE difference was found between the southern and northern side of tree stems. The sometimes large MOE variations seen in some individual trees are probably a result of wood variation and wood defects. MOE assessed with resonance-based technology varied between 7.4 and 14.1 GPa for logs cut at similar height (<6.0 m). Models of MOE variation were derived from factors related to growth conditions at stand and tree level, with an R 2 adj of c. 0.46–0.62. The models indicate that growth and tree attributes associated with and/or creating less stem taper would yield trees with higher MOE.  相似文献   

3.
The effects of stocking on wood stiffness (MoE) for three Eucalyptus species are quantified using a 6-year-old trial established in New South Wales, Australia. An acoustic time-of-flight tool measured the velocity between two probes in the outerwood, from which the stiffness was estimated. Four stocking levels (714, 1,250, 1,667 and 3,333 sph) were examined. Stiffness varied significantly between all species, with E. cloeziana showing the highest stiffness (14.2–15.7 GPa), followed by E. pilularis (12.2–13.5 GPa) and E. dunnii (10.7–12.6 GPa). There was a stiffness increase (around 11%) between 714 and 1,250 stems/ha for all species but thereafter differences between stockings were not always significant. Trees were also assessed for basic density, dbh, total height, crown area, green crown height and stem slenderness (height/dbh). Only stem slenderness had a significant association (0.41 ± 0.17) with stiffness. These findings suggest that, where stiffness is a priority, forest managers could reduce establishment costs with low stockings (around 1,250 stems/ha).
Luis Alejandro ApiolazaEmail:
  相似文献   

4.
The process of lesion formation and host response to natural infection by Armillaria ostoyae were studied in the roots of western larch (Larix occidentalis) and Douglas‐fir (Pseudotsuga menziesii ssp. glauca) trees in the three age classes, 6–8, 18–19 and 85–95 years. The characteristics of lesions on infected roots were recorded and bark samples were dissected from infection points and lesion margins in the field and stored in liquid nitrogen for macroscopic study in the laboratory. Infection in the roots of 6‐ to 8‐year‐old trees advanced freely, overcoming any host resistance, quickly girdling the root collar and killing the trees. In 18‐ and 19‐year‐old trees, however, 43% of infections on western larch and 27% of the infections on Douglas‐fir roots were confined to lesions bounded by necrophylactic periderms with multiple bands of phellem. Host response was similar in 85‐ to 95‐year‐old trees, but the percentage of confined lesions was higher than in younger trees. The results suggest that larch shows resistance to A. ostoyae at a younger age and with greater frequency than Douglas‐fir.  相似文献   

5.
Abstract

Growing markets for chopped firewood have created alternative uses for the by-products of sawmills. Based on empirical data and simulated results, the potential of birch (Betula pendula Roth, Betula pubescens Ehrh.) from commercial thinnings for combined industrial production of sawn timber and firewood billets was investigated. In the simulations, different sawing patterns were used for logs intended to combine production of sawn timber and billets for chopped firewood (‘sawlogs’), and for logs intended only to firewood production (‘firewood logs’). Finally, economical feasibility analysis was done concerning the differences between the sawmills’ traditional business concept and the novel concept combining sawn wood and firewood production. The bucking results for the volume yield of different timber assortments varied only slightly between the different bucking options, i.e. the combinations of timber assortments. The main differences in the volumes of timber assortments were due to the stand type where the birch trees were sampled (planted, naturally regenerated, mixed birch–spruce). In the sawing procedure, the output of sawn timber varied between 24% and 42% of the log volume in the sawlogs, depending on the log diameter class. As the volume yield of sawn timber and firewood billets was counted together in the case of sawlogs, the log consumption was c. 1.75 m3 of roundwood per 1 m3 of sawn timber and firewood billets. In the case of the firewood logs, the log consumption rate was considerably lower, only c. 1.35. The economic calculations showed that using the firewood approach in sawing may increase the net added value of products by €1.9–5.4 m?3 of logs, depending on their diameter class. As a conclusion, parallel production of sawn timber and firewood from logs from the first and second commercial thinning of birch-dominated stands is a concept that could work as an alliance between a sawmiller and a firewood entrepreneur. The concept could be competitive compared with both traditional sawmilling and production of chopped firewood.  相似文献   

6.
Climate change poses severe pressures to European conifer forests. Using non-native tree species, such as Douglas fir (Pseudotsuga menziesii), is one proposed strategy to circumvent adverse effects for forest management. However, novel forest health risks can impair the cultivation of non-native trees. In 2022, we observed large Douglas fir trees (approximately 40–50 years old, diameter at breast height (dbh) 21–41 cm) that had recently died in spring or summer 2022 in three forest stands in Eastern Austria. Intensive resin flow, blue-staining of the sapwood and the absence of bark- and wood-boring insects indicated a fungal infection. Isolations from blue-stained sapwood of the dead trees consistently yielded cultures of the opportunistic pathogen Diplodia sapinea. In a greenhouse wound inoculation experiment, seven D. sapinea isolates obtained from Douglas fir caused phloem necrosis, blue-staining of sapwood and mortality and thus displayed pathogenicity towards seedlings of both Ps. menziesii and its common host, Scots pine (Pinus sylvestris). Diplodia sapinea produced significantly longer areas of blue-stain as well as higher and faster mortality in Ps. menziesii compared to P. sylvestris. We conclude that D. sapinea substantially contributed to the death of seven of the 13 examined large Douglas fir trees. While this fungus has been described as a pathogen of young Douglas fir trees before, this is the first report that it can potentially kill large individuals of this conifer species under drought conditions. Thus, our results indicate that D. sapinea could represent a severe threat to the cultivation of Ps. menziesii in European forestry.  相似文献   

7.
《Southern Forests》2013,75(3):227-236
This study assessed the suitability of both visible and shortwave infrared of ASTER reflectance bands and various vegetation indices for estimating forest structural attributes of Eucalyptus species. The study was conducted in even-aged monoculture plantations of E. grandis and E. nitens in the southern KwaZulu-Natal Midlands of South Africa. Empirical relationships between forest structural attributes, i.e. stems per hectare (SPHA), diameter at breast height (DBH), mean tree height (MTH), basal area and volume, and ASTER data were derived using correlation and canonical correlation analysis (CCA). The results indicated weak relationships between the studied forest structural attributes and ASTER data. In the younger plantation stands (4–6 years) the adjusted R 2 values from CCA regression for SPHA, DBH, MTH, basal area and volume were 54.2, 63.5, 33.8, 25.4 and 30.3, respectively. The adjusted R 2 values in the mature stands (7–9 years) were distinctly weaker with values of 50.7, 55.8, 25.1, 20.2 and 27.3 for SPHA, DBH, MTH, basal area and volume, respectively. The results imply that ASTER satellite data are not applicable to forest structural attribute estimation in commercially managed forest stands.  相似文献   

8.
Abstract

Genetic variation in wood density, microfibril angle (MFA), wood stiffness (MOE), height, diameter and volume was investigated in a 26-year-old Norway spruce [(Picea abies (L.) Karst.] clonal trial in southern Sweden. Wood quality measurements were performed on 10 mm increment cores using SilviScan. For MFA, mean values of annual rings showed the highest value (30°) at ring 2 counting from the pith, followed by a steep decrease and a gradual stabilization around ring 12 at approximately 14°. MOE showed a monotonic increase from 5 GPa to 14 GPa when moving from pith to bark. High broad-sense heritability values were found for wood density (0.48), MFA (0.41) and MOE (0.50). All growth traits displayed heritability values of similar magnitudes as reported in earlier studies. The generally high age–age correlations between different sections of the wood cores suggested that early selection for wood quality traits would be successful. Owing to unfavorable genetic correlations between volume and MOE, the correlated response indicated that selection for volume only at age 10 would result in a 0.27% decrease in weighted MOE at age 26 for every 1% increase in volume.  相似文献   

9.
  相似文献   

10.
A research project supported by the Japan Wood Working Machinery Association has been conducted since 1999 to examine the feasibility of sugi (Cryptomeria japonica D. Don) composite glulam beams reinforced with Douglas fir (Pseudotsuga menziesii Franco) lamination. This study, part of the project, was concerned with the strength properties of timber joints composed of composite glulams using newly developed structural steel connectors. Two types of beam were prepared: 10 plies (inner 6 plies sugi, outer 4 plies Douglas fir) and 8 plies (inner 4 plies sugi, outer 4 plies Douglas fir). Two types of structural steel connector, Haratec and Standard, were used for joining the beam with a post or a girder. The relation between load and deformation of the joints was represented as a typical nonlinear curve. Initial stiffness and maximum load of the joint composed of the composite glulam were in the range between those of sugi and Douglas fir. Strength properties of the joints varied with three variables: type of connector, depth of the glulams, and the type of joint. Thus, the allowable loads for the connectors should be determined for each combination of these variables.  相似文献   

11.
Two models for determination of the number of stems per hectare in forest stands (N) from attributes derived by aerial photo‐interpretation were developed. The models relied on the assumption that N could be determined by dividing the total stand volume per hectare with the volume of the “average tree”; defined by stand mean height and the diameter corresponding to mean basal area of a stand. Input variables of the models were stand mean height, crown closure and site quality. Additionally, model II required input of average stand volume per hectare and average mean diameter derived from stratified field sample plot inventories. Material for 143 coniferous stands was used for the testing of the models. The stands were recorded by intensive field measurements. Aerial photographs at the approximate scale of 1:15 000 were used for photo‐interpretation. The N value was underestimated in model I by 5.4–47.0%. The standard deviation for the differences was 15.2–26.2% for mature stands and 41.4–44.2% for young thinning phase stands. For model II, the mean difference between the predicted and observed N value was in the range ‐16.1% to 12.2%.  相似文献   

12.
A mill study of 62 trees, in which boards were reassembled into their original logs, permitted the construction of wood quality maps. In this instance stiffness profiles were obtained from butt to upper-top logs, based on machine stress grading of all boards and then averaging values from the 62 trees. Traditionally the butt log has been perceived to be the most valuable log in a tree, because it is bigger and gives a higher recovery of lumber. However, it is shown to contain a wide cone of very low stiffness wood that is confined to the first 2.4–2.7 m above ground level. Above this point stiffness gradients become cylindrical with no noticeable decrease in stiffness up the tree stem. Stiffness in all logs increased radially from pith to cambium with the greatest change being associated with the wood nearest the pith. The low stiffness at the base of the tree suggests that an alternative log bucking strategy should be considered, namely cutting a short 2.4–2.7 m butt log for plywood/LVL or for bolter sawing and only cutting standard length logs above this point.The least stiff logs (lowest 20%) yielded lumber that had an average stiffness that was over 1 GPa less than the average for the population. A case can be made for separating these logs and processing them differently.  相似文献   

13.
The purpose of this study was to determine the modulus of elasticity (MOE) and the modulus of rupture (MOR) in the radial bending test for small, clear specimens of Finnish birch (Betula pendula Roth and B. pubescens Ehrh) wood originating from mature trees. The dependency of MOE and MOR on the specific gravity of birch wood was studied, and the relationship between MOE and MOR was modelled at the different heights and at the different distances from the pith of the tree. For B. pendula, the mean values for MOE and MOR were 14.5 GPa and 114 MPa, whereas B. pubescens had means of 13.2 GPa and 104 MPa, respectively. At the corresponding specific gravity, the bending stiffness and strength values did not differ between the two species. The results indicated a linear relationship between the MOE and MOR, irrespective of the birch species or the within-stem location. Both MOE and MOR increased clearly from the pith towards the surface of the tree and decreased slightly from the base to the top of the tree. It seems that if products with as high stiffness and bending strength as possible are wanted, sorting of raw materials into different grades according to their within-tree origin can be of value.  相似文献   

14.
《Southern Forests》2013,75(4):319-328
Harvested logs supplied from five fibre-managed Eucalyptus nitens plantation coupes with different growing environments were assessed for quality and stiffness. Billets extracted from the logs were rotary peeled for veneer. When averaged across the five coupes, 30% of veneer recovered could be used directly in structural plywood production and an additional 20–25% could be used after further processing. In visual assessment most veneer was assigned an Australian/New Zealand Standard AS/NZS2269.0:2012 Quality D. Acoustic testing during processing showed veneer peeled from a drier and lower elevation coupe had significantly higher dynamic MOE values than veneer processed from logs harvested from wetter higher elevation coupes. To examine the utility of the E. nitens peeled veneer in the production of structural plywood, it was combined with veneer of a known higher stiffness, rotary peeled from regrowth forest Tasmanian oak species logs. Structural seven-ply panels were manufactured from the veneer prepared in three different ply arrangements. Mechanical testing of the panels in accordance with AS/NZS2269.0:2012 showed that an F17 target stress-grade panel product of 83% E. nitens and 17% Tasmanian oak species could be produced, if E. nitens veneer of higher stiffness were selected from veneer segregated by estimated dynamic Modulus of Elasticity value. Panels with 50% E. nitens and 50% Tasmanian oak veneer could be produced by selecting E. nitens veneer of lower stiffness after segregation. In the majority of panels tested stress-grade rating was limited by perpendicular bending strength. Outcomes from the study indicate that structural plywood can be manufactured using differing proportions of E. nitens veneer, rotary peeled from fibre-managed plantations, provided it can be segregated into stiffness categories and selected to achieve a target stress-grade.  相似文献   

15.
Abstract

Fungal root pathogens are widespread and may cause substantial seedling losses in conifer nurseries. Furthermore, poor seedling survival and growth on reforestation sites results in reduced forest regeneration. Use of microbial inoculants for disease control and plant growth promotion has become an important endeavour. A microbial culture collection of 500 strains was assessed for biological control of fungal root pathogens and/or plant growth promotion of conifer seedlings. Seven of these strains showed significant suppres-sive effects on various soil-bome fungal pathogens. On Douglas fir, two strains, RAL3 and 64-3, reduced disease caused by Fusariumby. 7-42% in repeated growth room assays. The same strains significantly increased healthy stand of white spruce seedlings inoculated with Fusariumand Pythiumin a conifer nursery, and increased the survival of bare-root white spruce seedlings planted on a reforestation site by 19-23%. Both strains also significantly increased new root and total plant dry weights. Strain RAL3 in commercial formulation maintained a viable population of about log 8-9 cfu/ml for over a year when stored at 5°C. Strain survival on seed varied with conifer species. No decreases in bacterial populations were observed on seeds of jack pine or Douglas fir after 37 to 44 days storage at 5°C, but decreases were observed on seeds of white spruce and Scots pine. This study has provided candidate beneficial microbial inocu-lants which offer promise for development of commercial inoculants for the forestry industry.  相似文献   

16.
On the regeneration and infection of roots of Douglas fir (Pseudotsuga menziesii [Mirb.] Franco) by fungi present in the soil. 167 roots in 4 stands were severed 40–60 cm from the base of the tree. At the proximal cut ends of the thick roots of the 40 years old trees on loamy sand, either replacement roots or callous tissue were formed (only a small percentage of those roots was invaded by rot causing Basidiomycetes), or no new roots and no callus were formed and root rot fungi (Fomes annosus, Coniophora puteana, Resinicium bicolor) had invaded the root sections from the soil. On the root sections of the 35 and 55 years old Douglas firs on sand, with the exception of 2 roots, neither replacement roots nor callus were formed; Fomes and Coniophora had invaded the thicker roots of the older trees from the soil.  相似文献   

17.
Acoustics provide opportunities for non-destructive evaluation of the mechanical properties of wood, especially stiffness. In this work, Fakopp 2D a time of flight (TOF) tool and WoodSpec a resonance-based system were used. In a scoping study on young Pinus radiata trees (aged 8–11) no systematic differences were found between the Fakopp acoustic velocity on opposite sides of young trees. These Fakopp values were then averaged and correlated with that from the equivalent log using WoodSpec. Finally stem and log values were correlated with acoustic velocity in outerwood and in corewood lumber. External measurements on the log (standing tree) correlated well with those for lumber cut adjacent to the bark and modestly for the corewood (R 2 of 0.89 and 0.74, respectively). In a separate study, the acoustic velocities were measured on standing trees in three adjacent stands aged 8, 16 and 26 and the data were used to construct a “Russian Doll” model to demonstrate the enormous range in wood stiffness within and between trees. The stiffest 20% of the population was estimated to be 146, 87 and 76% stiffer than the poorest 20% in the corewood (age 8), intermediate (age 16) and outerwood zone (age 26) respectively.
M. GrabianowskiEmail:
  相似文献   

18.
Stem and root rot of Douglas fir, Pseudotsuga menziesii (Mirb.) Franco. In 20 year old Douglas fir most of the butt rot was caused by Fomes annosus. Stem decay was central as well as eccentric reaching the sap wood in either case. The side roots of 20 year old Douglas fir were compared with those of a 40 year old stand with butt rot. In individual trees with decay there were less roots with Fomes annosus decay in the younger stand. Calocera viscosa was more abundant in the older stand. Soil conditions which might have favoured root rot in the young stand are discussed.  相似文献   

19.
Fusarium species can cause damping‐off and root rot of young conifer seedlings, resulting in severe crop and economic losses in forest nurseries. Disease control within tree nurseries is difficult because of the inability to characterize and quantify Fusarium spp. populations with regard to disease potential because of high variability in isolate virulence. Fusarium isolates were collected from healthy and diseased seedlings of Douglas‐fir (Pseudotsuga menziesii) and western white pine (Pinus monticola) from a nursery in Idaho, USA. Molecular markers such as DNA sequences (mitochondrial small subunit and nuclear translation elongation factor 1‐alpha) and amplified fragment length polymorphism were used to identify isolates as either F. oxysporum or F. commune. In addition, diagnostic primers were developed to detect and distinguish F. commune from F. oxysporum. In vitro and greenhouse virulence tests were completed on Douglas‐fir germinants and seedlings. For Douglas‐fir germinants and seedlings, F. oxysporum isolates generally caused less severe symptoms, whereas most F. commune isolates caused mortality through damping‐off. This is the first report of direct evidence that F. commune can cause damping‐off disease on Douglas‐fir seedlings under greenhouse conditions.  相似文献   

20.
Periderm formation was studied in bark samples collected from the roots of western larch (Larix occidentalis) and Douglas‐fir (Pseudotsuga menziesii) trees infected with Armillaria ostoyae. Necrophylactic periderms were formed in advance of infection and successfully restricted continued fungal spread in 68 and 45% of the samples collected from 10‐ and 27‐year‐old western larch, respectively. However, all periderms formed in 11‐ and 25‐year‐old Douglas‐fir had been breached by the advancing fungus. In both species, necrophylactic periderms were commonly breached at the junction of the periderm with the vascular cambium. In western larch, stone phellem often comprised the external phellem layer of necrophylactic periderms with multiple bands of phellem. In 27‐year‐old western larch, infection was often confined to discrete lesions bounded by multiple periderms with multiple bands of phellem. In both tree species, phellem production was greater in response to infection than in response to abiotic wounding.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号