首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Polyphenols are widely regarded as antioxidants, due in large part to their free radical scavenging activities and their ability to disrupt radical chain propagation. However, recent studies have demonstrated that the oxidation of some polyphenolic compounds, such as the tea-derived compound (-)-epigallocatechin-3-gallate (EGCG), results in the generation of reactive oxygen species that can potentially compromise the oxidative stability of food lipids under some conditions. In this present study, the rate of hydrogen peroxide (H(2)O(2)) generation and its stability, resulting from EGCG oxidation in Tween 80- and sodium caseinate-stabilized oil-in-water (O/W) emulsions in the presence of iron (25 μM Fe(3+) from FeCl(3)), were examined. Observed H(2)O(2) levels in protein-stabilized emulsions were significantly lower across all treatments as compared to surfactant-stabilized emulsions. The lower observed H(2)O(2) concentrations seen in the protein system are likely due to the antioxidant effects of the added proteins, which either prevented the generation of or more likely scavenged the peroxide. All protein-stabilized emulsions containing EGCG showed increases in carbonyl concentrations, a marker of protein oxidation, throughout the study. The H(2)O(2) scavenging activity of aqueous phase and interfacial caseinate and whey protein isolate (WPI) was also evaluated. Both proteins showed concentration-dependent scavenging of H(2)O(2) with caseinate displaying significantly higher scavenging abilities at all concentrations. These results suggest that food proteins may play an important role in mitigating the pro-oxidant effects of polyphenols.  相似文献   

2.
The purpose of this study was to create water-in-oil (W/O) and water-in-oil-in-water (W/O/W) emulsions containing gelled internal water droplets. Twenty weight percent W/O emulsions stabilized by a nonionic surfactant (6.4 wt % polyglycerol polyricinoleate, PGPR) were prepared that contained either 0 or 15 wt % whey protein isolate (WPI) in the aqueous phase, with the WPI-containing emulsions being either unheated or heated (80 degrees C for 20 min) to gel the protein. Optical microscopy and sedimentation tests did not indicate any significant changes in droplet characteristics of the W/O emulsions depending on WPI content (0 or 15%), shearing (0-7 min at constant shear), thermal processing (30-90 degrees C for 30 min), or storage at room temperature (up to 3 weeks). W/O/W emulsions were produced by homogenizing the W/O emulsions with an aqueous Tween 20 solution using either a membrane homogenizer (MH) or a high-pressure valve homogenizer (HPVH). For the MH the mean oil droplet size decreased with increasing number of passes, whereas for the HPVH it decreased with increasing number of passes and increasing homogenization pressure. The HPVH produced smaller droplets than the MH, but the MH produced a narrower particle size distribution. All W/O/W emulsions had a high retention of water droplets (>95%) within the larger oil droplets after homogenization. This study shows that W/O/W emulsions containing oil droplets with gelled water droplets inside can be produced by using MH or HPVH.  相似文献   

3.
The purpose of this research was to examine the influence of the physical state of lipids on iron-promoted oxidation of methyl linolenate in octadecane oil-in-water emulsions. Octadecane and methyl linolenate oil-in-water emulsions were prepared that contained droplets having the octadecane as either liquid or solid. The physical state of the octadecane was confirmed by a differential scanning calorimeter (DSC). The effect of the physical state of the lipid on oxidation rates was determined as a function of iron concentration (80 and 160 microM), pH (3.0 or 7.0), emulsifier type, and cooling rate. Oxidation of methyl linolenate was determined by lipid hydroperoxides and thiobarbituric acid reactive substances (TBARS). Emulsions containing solid octadecane had higher rates of lipid hydroperoxide and TBARS formation than those containing liquid octadecane. The rate at which the emulsions were cooled had no influence on oxidation rates. Oxidation rates in both emulsions increased with increasing iron concentration and decreasing pH. Oxidation rates were lowest in emulsions with cationic droplet membranes (dodecyl trimethylammonium bromide-stabilized), presumably due to the repulsion of iron from the oxidizable methyl linolenate in the emulsion droplet core. These results suggest that upon crystallization of octadecane, the liquid methyl linolenate migrated to the emulsion droplet surface, where it was more prone to oxidation because it was in closer contact with the iron ions in the aqueous phase.  相似文献   

4.
Three porphyran preparations with high emulsifying ability and varying molecular mass, 3,6-anhydrogalactose content, and sulfate content without any protenaceous component were prepared from dried nori processed from Porphyra yezoensis, a red alga. Each of these preparations was applied to demonstrate adsorption or binding to the surface of oil droplets. The decrease in porphyran concentration of the aqueous phase of O/W emulsions prepared with porphyran and with toluidine blue (TB)-porphyran complex formed by adding TB to the O/W emulsions indicated ready adsorption to the surface of oil droplets. The decrease in zeta-potential of the O/W emulsions suggested that the sulfate groups of the adsorbed porphyran were oriented toward the external aqueous phase. A biomolecular interaction analysis exhibited rapid binding of porphyran to C16-alkane, probably through 3,6-anhydrogalactose. Porphyran-coated liposomes were tolerant to digestion with phospholipase D. The increased molecular weight of the porphyran preparations had an increased effect on these characteristics. The results of this study demonstrate that the emulsifying ability of porphyran is derived from the adequate adsorption to the surface of oil droplets and that porphyran could be effectively applied to stabilize liposomes.  相似文献   

5.
Polyols have been incorporated into fish oil emulsions as a means for the inhibition of lipid oxidation and suppression of fishy flavor. However, the role of sugars and polyhydric alcohols as antioxidants has not been clearly established. Selected polyols were evaluated for their performance as antioxidants and modifiers of oxidation pathways in a model system. Oil/water (O/W) emulsions were prepared with freshly steam-deodorized menhaden oil. A layer of emulsion in aluminum pans held at 5 degrees C was exposed to 2550 lx fluorescent lights for 24 h before peroxide values and volatile flavor compounds were analyzed by GC headspace entrainment procedure. Antioxidant activity was confirmed for fructose, sucrose, raffinose, sorbitol, or mannitol when incorporated at 16% of the aqueous phase into model fish oil-in-water emulsions. Peroxide values were suppressed 10-18% in treated samples compared to control samples. Viscosity data did not exclude possible contributions from a restricted oxygen diffusion mechanism in the antioxidant activity, but revealed that emulsion viscosity did not govern fish oil oxidation rates. Combining polyols with phenolic antioxidants (alpha-tocopherol, BHT, or TBHQ) frequently diminished the antioxidant activity compared to that for individual phenolic antioxidants, which was interpreted as indicating that the H-donating activity of phenolic antioxidants was hindered by the H-bonding activity of polyols. A viscosity-based inhibition of the retroaldol conversion of (E,Z)-2,6-nonadienal to (Z)-4-heptenal with a high fructose concentration (67%) was attributed to a restriction of molecular mobility of reactants, but the conversion was only slightly inhibited by the concentration of fructose (16%) used in experimental emulsions. The data supported a hypothesis that either or both free radical scavenging and transition state metal chelation activities were provided by polyols in fish oil emulsions. Also, polyols retarded the water-requiring retroaldol decomposition of (E,Z)-2,6-nonadienal to (Z)-4-heptenal in the model systems and the reaction may be involved in some suppression of fishy flavors in emulsions.  相似文献   

6.
Catastrophic phase inversion (CPI) was used as a low-energy emulsification method to prepare oil-in-water (O/W) nanoemulsions in a lipid (Acetem)/water/nonionic surfactant (Tween 60) system. CPIs in which water-in-oil emulsions (W/O) are transformed into oil-in-water emulsions (O/W) were induced by changes in the phase ratio. Dynamic phase inversion emulsification was achieved by slowly increasing the water volume fraction (fw) to obtain O/W emulsions from water in oil emulsions. Composition and processing variables were optimized to minimize droplet size and polydispersity index (PdI). It was found that addition of the continuous phase to the dispersed phase following the standard CPI procedure resulted in the formation of oil droplets with diameters of 100-200 nm. Droplet size distribution during CPI and emulsification time depended on stirring speed and surfactant concentration. Droplet sizes in the inverted emulsions were compared to those obtained by direct emulsification: The process time to reach droplet sizes of around 100 nm was reduced by 12 times by using CPI emulsification. The Acetem/water nanoemulsion was also used as a carrier to incorporate oregano and cinnamon essential oils into soy protein edible films. The resulting composite films containing oregano oil showed better moisture barrier and mechanical properties compared to soy protein films.  相似文献   

7.
共轭亚油酸水包油型乳液的物理化学稳定性   总被引：2，自引：1，他引：1  
共轭亚油酸（conjugated linoleic acid, CLA）是一种具有多重生理功效的不饱和脂肪酸,其氧化稳定性较差,对光、热、氧气很不稳定。以亲水胶体为乳化剂制备CLA的水包油（O/W）型乳液可改善其氧化稳定性,扩大其在食品中的应用。该研究采用改性阿拉伯胶EM2为乳化剂、2种不同黏度的CLA为油相,通过测定乳液颗粒的粒径和粒径分布以及乳液在40℃贮存过程中的过氧化值和茴香胺值,研究了CLA的水包油（O/W）型乳液的物理化学稳定性。结果表明,高质量分数的EM2有利于形成粒径更小且分布均一的乳液颗粒。乳液的氧化稳定性很大程度上依赖于其物理稳定性。对于黏度较小的CLA,在各测试EM2质量分数下,CLA乳液具有较好的物理稳定性,且随着EM2质量分数的增大,乳液氧化稳定性提高。对于黏度较大的CLA,EM2质量分数为5%时,乳液具有较好的物理化学稳定性;增大EM2的质量分数,其稳定性下降。该研究可为今后研究基于乳液技术的功能性因子保护和增效提供参考,有利于CLA在食品行业中的推广应用。  相似文献   

8.
Oil-in-water (O/W) emulsions containing small oil droplets (d32 approximately 0.22 microm) stabilized by sodium dodecyl sulfate (SDS)-fish gelatin (FG) membranes were produced by an electrostatic deposition technique. A primary emulsion containing anionic SDS-coated droplets (zeta approximately -40 mV) was prepared by homogenizing oil and emulsifier solution using a high-pressure valve homogenizer (20 wt % corn oil, 0.46 wt % SDS, 100 mM acetic acid, pH 3.0). A secondary emulsion containing cationic SDS-FG-coated droplets (zeta approximately +30 mV) was formed by diluting the primary emulsion with an aqueous fish gelatin solution (10 wt % corn oil, 0.23 wt % SDS, 100 mM acetic acid, 2.00 wt % fish gelatin, pH 3.0). The stabilities of primary and secondary emulsions with the same oil concentration to thermal processing, ionic strength, and pH were assessed by measuring particle size distribution, zeta potential, microstructure, destabilized oil, and creaming stability. The droplets in secondary emulsions had good stability to droplet aggregation at holding temperatures from 30 to 90 degrees C for 30 min, [NaCl] < or = 100 mM, and pH values from 3 to 8. This study shows that the ability to generate emulsions containing droplets stabilized by multilayer interfacial membranes comprised of two or more types of emulsifiers, rather than a single interfacial layer comprised of one type of emulsifier, may lead to the development of food products with improved stability to environmental stresses.  相似文献   

9.
The effect of dispersed aqueous droplets in water-in-oil (W/O)-emulsion semisolid fats on aroma release and sensory perception was investigated on margarine models where model aroma substances were added. Aroma release from W/O-emulsion fat blends and bulk fat blends with added monoglycerides combining different fatty acids of various short-chain free fatty acids, methylketones, esters, and lactones were measured using headspace solid phase microextraction-gas chromatography/mass spectrometry (SPME-GC/MS), and their perception profiles were evaluated by sensory analysis. The presence of aqueous phase in a fat blend significantly reduced the headspace concentrations of butanoic acid and hexanoic acid, and also decreased the perceived intensity of total aroma and cheesy aroma. The aroma release of methylketones, esters, and lactones from the W/O-emulsion fat blends increased with increasing carbon chain length of the volatile molecules. The intensity of aroma perception in a W/O-emulsion fat blend depended on the melting point of the fatty acids (oleic, palmitic, stearic, and behenic) of the monoglyceride used as an emulsifier. Thus, aroma release from a W/O-emulsion semisolid fat blend was influenced by interactions between aroma volatiles and the dispersed aqueous droplets and by their viscoelastic properties.  相似文献   

10.
To obtain a better understanding of how the interfacial region of emulsion droplets influences lipid oxidation, the oxidative stability of salmon oil-in-water emulsions stabilized by whey protein isolate (WPI), sweet whey (SW), beta-lactoglobulin (beta-Lg), or alpha-lactalbumin (alpha-La) was evaluated. Studies on the influence of pH on lipid oxidation in WPI-stabilized emulsions showed that formation of lipid hydroperoxides and headspace propanal was much lower at pH values below the protein's isoelectric point (pI), at which the emulsion droplets were positively charged, compared to that at pH values above the pI, at which the emulsion droplets were negatively charged. This effect was likely due to the ability of positively charged emulsion droplets to repel cationic iron. In a comparison of lipid oxidation rates of WPI-, SW-, beta-Lg-, and alpha-La-stabilized emulsions at pH 3, the oxidative stability was in the order of beta-Lg > or = SW > alpha-La > or = WPI. The result indicated that it was possible to engineer emulsions with greater oxidative stability by using proteins as emulsifier, thereby reducing or eliminating the need for exogenous food antioxidants.  相似文献   

11.
The purpose of this research was to better understand the mechanisms by which proteins affect the rates of lipid oxidation in order to develop protein-stabilized emulsion delivery systems with maximal oxidative stability. This study evaluated the affect of pH and emulsifier concentration on the stability of cumene hydroperoxide in hexadecane-in-water emulsions stabilized by beta-lactoglobulin (beta-Lg). Emulsions prepared with 0.2 wt % beta-Lg (at pH 7.0) showed a 26.9% decrease in hydroperoxide concentrations 5 min after 0.25 mM ferrous ion was added to the emulsion. EDTA, but not continuous phase beta-Lg, could inhibit iron-promoted lipid hydroperoxide decomposition. Lipid hydroperoxides were more stable to iron-promoted degradation at pH values below the pI of beta-Lg, where the emulsion droplet would be cationic and thus able to repel iron away from the lipid hydroperoxides. Heating the beta-Lg-stabilized emulsions to produce a cohesive protein layer on the emulsion droplet surface did not alter the ability of iron to decompose lipid hydroperoxides. These results suggest that proteins at the interface of emulsion droplets primarily stabilize lipid hydroperoxides by electrostatically inhibiting iron-hydroperoxide interactions.  相似文献   

12.
Oil-in-water emulsions containing cationic droplets stabilized by lecithin-chitosan membranes were produced using a two-stage process. A primary emulsion containing anionic lecithin-coated droplets was prepared by homogenizing oil and emulsifier solution using a high-pressure valve homogenizer (5 wt % corn oil, 1 wt % lecithin, 100 mM acetic acid, pH 3.0). A secondary emulsion containing cationic lecithin-chitosan-coated droplets was formed by diluting the primary emulsion with an aqueous chitosan solution (1 wt % corn oil, 0.2 wt % lecithin, 100 mM acetic acid, and 0.036 wt % chitosan). The stabilities of the primary and secondary emulsions with the same oil concentration to thermal processing, freeze-thaw cycling, high calcium chloride concentrations, and lipid oxidation were determined. The results showed that the secondary emulsions had better stability to droplet aggregation during thermal processing (30-90 degrees C for 30 min), freeze-thaw cycling (-10 degrees C for 22 h/30 degrees C for 2 h), and high calcium chloride contents (相似文献   

13.
The behavior of antioxidants in emulsions is influenced by several factors such as pH and emulsifier type. This study aimed to evaluate the interaction between selected food emulsifiers, phenolic compounds, iron, and pH and their effect on the oxidative stability of n-3 polyunsaturated lipids in a 10% oil-in-water emulsion. The emulsifiers tested were Tween 80 and Citrem, and the phenolic compounds were naringenin, rutin, caffeic acid, and coumaric acid. Lipid oxidation was evaluated at all levels, that is, formation of radicals (ESR), hydroperoxides (PV), and secondary volatile oxidation products. When iron was present, the pH was crucial for the formation of lipid oxidation products. At pH 3 some phenolic compounds, especially caffeic acid, reduced Fe(3+) to Fe(2+), and Fe(2+) increased lipid oxidation at this pH compared to pH 6. Among the evaluated phenols, caffeic acid had the most significant effects, as caffeic acid was found to be prooxidative irrespective of pH, emulsifier type, and presence of iron, although the degrees of lipid oxidation were different at the different experimental conditions. The other evaluated phenols were prooxidative at pH 3 in Citrem-stabilized emulsions and had no significant effect at pH 6 in Citrem- or Tween-stabilized emulsions on the basis of the formation of volatiles. The results indicated that phenol-iron complexes/nanoparticles were formed at pH 6.  相似文献   

14.
Whey protein isolate (WPI), soy protein isolate (SPI), and sodium caseinate (CAS) can inhibit lipid oxidation when they produce a positive charge at the interface of emulsion droplets. However, when proteins are used to stabilize oil-in-water emulsions, only a fraction of them actually absorb to the emulsion droplets, with the rest remaining in the continuous phase. The impact of these continuous phase proteins on the oxidative stability of protein-stabilized emulsions is not well understood. WPI-stabilized menhaden oil-in-water emulsions were prepared by high-pressure homogenization. In some experiments WPI was removed from the continuous phase of the emulsions through repeated centrifugation and resuspension of the emulsion droplets (washed emulsion). Unwashed emulsions were more oxidatively stable than washed emulsions at pH 7.0, suggesting that continuous phase proteins were antioxidative. The oxidative stability of emulsions containing different kinds of protein in the continuous phase decreased in the order SPI > CAS > WPI, as determined by both hydroperoxide and headspace propanal formation. Iron-binding studies showed that the chelating ability of the proteins decreased in the order CAS > SPI > WPI. The free sulfhydryls of both WPI and SPI were involved in their antioxidant activity. This research shows that continuous phase proteins could be an effective means of protecting omega-3 fatty acids from oxidative deterioration.  相似文献   

15.
The effects of the emulsifiers lecithin, Tween 20, whey protein isolate, mono-/diacylglycerols, and sucrose fatty acid ester on oxidation stability of a model oil-in-water emulsion prepared with enzymatically synthesized menhaden oil-caprylic acid structured lipid were evaluated. Oxidation was monitored by measuring lipid hydroperoxides, thiobarbituric acid reactive substances, and the ratio of combined docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) contents to palmitic acid in the emulsion. After high-pressure homogenization, all emulsions, except those prepared with lecithin, had similar droplet size distributions. All structured lipid emulsions, except for the lecithin-stabilized emulsions, were stable to creaming over the 48-day period studied. Emulsifier type and concentration affected oxidation rate, with 0.25% emulsifier concentration generally having a higher oxidation rate than 1% emulsifier concentration. Overall, oxidation did not progress significantly enough in 48 days of storage to affect DHA and EPA levels in the emulsion.  相似文献   

16.
The absence of reliable estimates of distributions of antioxidants in food emulsions hinders the development of a useful method for comparing the efficiencies of antioxidants. Here we describe the application of a pseudophase kinetic model, originally developed for homogeneous microemulsions, to the determination of distribution constants of tert-butylhydroquinone, TBHQ, in a fluid, opaque, model food emulsion composed of the nonionic emulsifier C(12)E(6), octane, and water. This kinetic method should be applicable to a wide variety of charged and uncharged antioxidants in emulsions composed of charged and uncharged emulsifiers. The distribution constants for partitioning of TBHQ between the oil and surfactant film regions, K(O)(I), and the aqueous and surfactant film regions, K(W)(I), were obtained by fitting changes in first-order rate constants, k(obs), with emulsifier volume fraction for the reaction of 4-hexadecyl-2,6-dimethylbenzenediazonium ion, 16-ArN(2)(+), with TBHQ. The rate of formation of the reduced arene product hexadecyl-2,6-dimethylbenzene, 16-ArH, was followed by HPLC. About 90% of the TBHQ is in the surfactant film at about 2% volume fraction of C(12)E(6), which suggests that this region may be the primary site of antioxidant activity for neutral phenolic antioxidants.  相似文献   

17.
The effects of riboflavin photosensitization on the oxidative stability of oil-in-water (O/W) emulsions were determined using lipid hydroperoxides and headspace volatile analyses. The influences of a metal chelator, sodium azide, and superoxide dismutase (SOD) on oxidation pathways were tested to gain a better understanding of the role of transition metals, singlet oxygen, and superoxide anion, respectively. Emulsions with riboflavin and visible light irradiation had significantly higher lipid hydroperoxides and volatiles (p < 0.05) as compared to samples without light irradiation or riboflavin. The addition of ethylenediammetetraacetic acid (EDTA) decreased the formation of lipid hydroperoxides, hexanal, 2-heptenal, and 1-octen-3-ol in a concentration-dependent manner. Sodium azide, a singlet oxygen physical quencher, only inhibited the formation of 2-heptenal and 1-octen-3-ol. Overall, photosensitized riboflavin participated in both type I and type II pathways in O/W emulsions, and these pathways enhance the prooxidant activity of metals through their ability to produce lipid hydroperoxides and superoxide anion.  相似文献   

18.
The aim of the present study was to investigate the effects of oil-in-water (O/W) nanoemulsions combined with six different natural antioxidants on the stability of citral. Acidic emulsions (lecithin-stabilized palm kernel lipid in pH 3 buffer) containing 1000 ppm citral and 1000 ppm antioxidants (black tea extract, ascorbic acid, naringenin, tangeretin, β-carotene, and tanshinone) were stored at 25 and 50 °C, respectively. The emulsions with and without antioxidants were analyzed by solid phase microextraction gas chromatography (SPME-GC) to monitor the degradation process of citral and the formation of different off-flavor compounds, such as α,p-dimethylstyrene and p-methylacetophenone. The results suggested that encapsulation of citral in emulsions and the addition of the appropriate antioxidants (β-carotene, tanshinone, and black tea extract) could greatly enhance citral's chemical stability during storage.  相似文献   

19.
为探究茶多酚（Tea Polyphenols, TPs）对辛烯基琥珀酸酐（Octenyl Succinic Anhydride, OSA）酯化淀粉纳米颗粒（Starch Nanoparticles,SNPs）及其稳定的Pickering乳液性质的影响,该研究在制备OSA-SNPs的过程中添加TPs,研究TPs对OSA-SNPs的理化性质和乳化性能的影响。结果发现,添加TPs使OSA-SNPs的平均粒径增加、表面Zeta电位绝对值下降、接触角减小（P<0.05）。通过傅立叶红外光谱扫描发现,TPs与OSA-SNPs之间存在氢键和疏水相互作用。在TP-OSA-SNPs稳定的乳液中,增加TP-OSA-SNPs的质量浓度（从0.5 g/mL至2.0 g/mL）,乳滴平均直径明显减小（P<0.05）;当TP-OSA-SNPs的质量浓度增加至2 g/mL时,乳液形成了油滴紧密堆积的界面结构,能够抑制油滴迁移。通过加速氧化试验发现,与OSA-SNPs相比,TP-OSA-SNPs稳定的乳液中氢过氧化物值（Peroxide Value, POV）相对较低（P<0.05）,说明TP-OSA-SNPs具有延缓乳液中油脂氧化的作用。结果表明,这种新型具有抗氧化功能的食品级颗粒乳化剂,对构筑淀粉基Pickering乳液载体具有潜在价值。  相似文献   

20.
The oxidation of fatty acids can be inhibited by engineering the surface of oil-in-water emulsion droplets to decrease interactions between aqueous phase prooxidants and lipids. The objective of this research was to evaluate whether emulsions stabilized by a multilayer emulsifier systems consisting of beta-lactoglobulin and citrus or sugar beet pectin could produce fish oil-in-water emulsions that had good physical and oxidative stability. Sugar beet pectin was compared to citrus pectin because the sugar beet pectin contains the known antioxidant, ferulic acid. A primary Menhaden oil-in-water emulsion was prepared with beta-lactoglobulin upon which the pectins were electrostatically deposited at pH 3.5. Emulsions prepared with 1% oil, 0.05% beta-lactoglobulin, and 0.06% pectins were physically stable for up to 16 days. As determined by monitoring lipid hydroperoxide and headspace propanal formation, emulsions prepared with the multilayer system of beta-lactoglobulin and citrus pectin were more stable than emulsions stabilized with beta-lactoglobulin alone. Emulsions prepared with the multilayer system of beta-lactoglobulin and sugar beet pectin were less stable than emulsions stabilized with beta-lactoglobulin alone despite the presence of ferulic acid in the sugar beet pectin. The lower oxidative stability of the emulsions with the sugar beet pectin could be due to its higher iron and copper concentrations which would produce oxidative stress that would overcome the antioxidant capacity of ferulic acid. These data suggest that the oxidative stability of oil-in-water emulsions containing omega-3 fatty acids could be improved by the use of multilayer emulsion systems containing pectins with low metal concentrations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号