首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This study was carried out to investigate the carcass characteristics of Hanwoo (Korean cattle) from different sex conditions, raising altitudes and slaughter seasons. The total number of cattle used in this study was 3608 heads which comprised of 1336 bulls and 1660 steers. The data was analyzed according to sex condition (bull and steer), raising altitude (low: 0–100 m and high: 700–800 m) and slaughter season (spring, summer, autumn and winter). At 24 h post-slaughter, the carcasses were weighed and evaluated for carcass traits according to the Korean carcass grading standard by an official grader. Carcass weight, ribeye area, yield index and grade, and meat color, firmness and maturity scores of carcass from bulls were significantly higher (P < 0.001) than those from steers. Inversely, the backfat thickness, marbling score and quality grade of carcass from steers were significantly higher (P < 0.001) than those from bulls. The maturity score of carcass from a high area was significantly higher (P < 0.01) than that from a low area. The ribeye area of carcass from summer was significantly smaller (P < 0.05) than that from other seasons. The maturity score of carcass from the summer season was highest among that from other seasons and the lowest was that from the winter season. Marbling score and carcass quality grade from the winter season were highest among those from other seasons and the lowest were those from the autumn season. There were no significant interactions between sex condition and raising altitude on carcass traits except the ribeye area. There were significant interactions between sex condition and slaughter season on marbling score and carcass quality grade. There were no significant interactions between raising altitude and slaughter season on all of the carcass traits. There were significant interactions among sex condition, raising altitude and slaughter season on meat color score. It was concluded that sex condition affected muscle and fat depositions on the carcass, raising altitude affected maturity and slaughter season affected ribeye area, maturity and marbling.  相似文献   

2.

Live weight gain of steers grazing at three different target sward heights, Low (3-6 cm), Medium (6-10 cm) and High (>10 cm), together with carcass fat deposition, were studied during two grazing seasons. Sward height was measured with a sward stick. The grassland consisted of seminatural grazing areas mixed with previously cultivated areas. Animals grazed continuously with small adjustments in animal numbers (year 1) or pasture area (year 2) to maintain sward height within the target for each treatment. The recorded average sward heights were 4.7, 6.8 and 11.1 cm for pastures on treatments Low, Medium and High, respectively. The animals weighed approximately 440 kg at the start of the grazing season and went directly from pasture to slaughter at the end of the experiment. No differences between years were found and data from both years were thus pooled, giving a total of 50 steers of the Swedish Red and White breed in the data set. Over the whole grazing season, the average daily live weight gain of animals on treatment Low (0.43 kg day  相似文献   

3.
To evaluate effects of previous forage systems on feedlot performance, yearling Hereford steers (average initial weight of 249 kg) were grazed on tall fescue (TF), smooth bromegrass-red clover (BG-RC) or orchardgrass-red clover (OG-RC) pastures before finishing. Serial slaughter was utilized during the first 2 yr of this study to determine changes in carcass characteristics throughout finishing, while steers were slaughtered at approximately 29% body fat during the third year. Steers grazing TF entered the feedlot at lighter weights and maintained lighter weights throughout finishing (P less than .05) even though dry matter intakes and feed conversions were similar (P greater than .05) among treatments. Steers that previously grazed TF had less (P less than .05) body fat, body protein, fat thickness and marbling, smaller (P less than .05) ribeye areas and lower (P less than .05) USDA yield and quality grades than than those that grazed BG-RC and OG-RC. However, linear contrasts indicated that steers grazing TF were compensating in ribeye area, marbling and quality grade as days in feedlot increased. This was confirmed in the third-year study, since carcass characteristics were similar among all steers. During the third year, linear and quadratic contrasts indicated that steers that grazed TF partially compensated in body protein. As days in feedlot increased, live and hot carcass weights, body fat, fat thickness, kidney, pelvic and heart fat, marbling, and USDA yield and quality grades increased (P less than .05), while ribeye area and body protein plateaued. Although carcass characteristics were similar among treatments, steers backgrounded on TF entered the feedlot at lighter weights, and partially compensated in weight after 134 d of finishing.  相似文献   

4.
The effects of grazing and supplemental protein concentrations, provided during the grazing period, on subsequent finishing performance and carcass quality were investigated. This experiment was carried out using 15 Japanese Black cattle (Wagyu) steers. The steers were fed as follows: (i) grazing supplemented with moderate protein concentrate (GMP) (18% crude protein (CP); dry matter (DM) basis) before finishing, followed by feeding in a barn until slaughter; (ii) grazing supplemented with low protein concentrate (GLP) (14% CP; DM basis) before finishing, followed by feeding in the barn until slaughter; and (iii) no grazing before finishing (NG). From the end of the grazing season to the end of the growing period, the GMP and GLP steers were managed in the same way as the NG steers. All of the animals were fed the same diet in the finishing period (9 months to 28 months). None of the three treatments affected the average daily gains. For all treatments, chilled carcass weights were more than 450 kg and did not differ significantly among the groups. The longissimus muscle areas in the grazed steers were numerically larger than in those receiving the NG treatment. Fat thickness was significantly greater (P < 0.05) in the NG steers than in the grazed steers. The intramuscular fat and marbling scores were not affected in the grazed steers. In conclusion, the carcass quality of grazed steers was similar to that of the NG steers at a similar final age, and the quantity of meat in the NG steers would be less than that of the GMP and GLP steers. Therefore, spring‐born Wagyu steers should be grazed using the GLP supplement before fattening.  相似文献   

5.
The objective of this study was to estimate parameters required for genetic evaluation of Simmental carcass merit using carcass and live animal data. Carcass weight, fat thickness, longissimus muscle area, and marbling score were available from 5,750 steers and 1,504 heifers sired by Simmental bulls. Additionally, yearling ultrasound measurements of fat thickness, longissimus muscle area, and estimated percentage of intramuscular fat were available on Simmental bulls (n = 3,409) and heifers (n = 1,503). An extended pedigree was used to construct the relationship matrix (n = 23,968) linking bulls and heifers with ultrasound data to steers and heifers with carcass data. All data were obtained from the American Simmental Association. No animal had both ultrasound and carcass data. Using an animal model and treating corresponding ultrasound and carcass traits separately, genetic parameters were estimated using restricted maximum likelihood. Heritability estimates for carcass traits were 0.48 +/- 0.06, 0.35 +/- 0.05, 0.46 +/- 0.05, and 0.54 +/- 0.05 for carcass weight, fat thickness, longissimus muscle area, and marbling score, respectively. Heritability estimates for bull (heifer) ultrasound traits were 0.53 +/- 0.07 (0.69 +/- 0.09), 0.37 +/- 0.06 (0.51 +/- 0.09), and 0.47 +/- 0.06 (0.52 +/- 0.09) for fat thickness, longissimus muscle area, and intramuscular fat percentage, respectively. Heritability of weight at scan was 0.47 +/- 0.05. Using a bivariate weight model including scan weight of bulls and heifers with carcass weight of slaughter animals, a genetic correlation of 0.77 +/- 0.10 was obtained. Models for fat thickness, longissimus muscle area, and marbling score were each trivariate, including ultrasound measurements on yearling bulls and heifers, and corresponding carcass traits of slaughter animals. Genetic correlations of carcass fat thickness with bull and heifer ultrasound fat were 0.79 +/- 0.13 and 0.83 +/- 0.12, respectively. Genetic correlations of carcass longissimus muscle area with bull and heifer ultrasound longissimus muscle area were 0.80 +/- 0.11 and 0.54 +/- 0.12, respectively. Genetic correlations of carcass marbling score with bull and heifer ultrasound intramuscular fat percentage were 0.74 +/- 0.11 and 0.69 +/- 0.13, respectively. These results provide the parameter estimates necessary for genetic evaluation of Simmental carcass merit using both data from steer and heifer carcasses, and their ultrasound indicators on yearling bulls and heifers.  相似文献   

6.
The study evaluated the effect of gender status on carcass and meat quality of feedlot Angus × Nellore cattle. A total of 176 cattle, 20 months old, were confined for 190‐days and assigned to four treatments: bulls, immunocastrated, steers, and heifers. Bulls had greater rib eye area and HCW (p = 0.0001). Heifers had increased fat thickness (p = 0.0001). Steers and heifers had higher marbling scores (p = 0.0001). There was interaction between gender and aging time for Warner‐Bratzler Shear Force (p = 0.0002), L* (p = 0.0118), and b* (p = 0.0113) values of beef. The sensory panel results showed that beef from bulls had the lowest consumer overall acceptance (p = 0.0278). Especially, regardless tenderness, steers and immunocastrated beef were considered tender, independent of aging time. Beef produced by heifers, steers, and immunocastrated is considered to be of higher quality than bulls. Thus, it is may be an interesting alternative to produce high‐quality beef than bulls, to attend the consumer demand for high‐quality products. Additionally, the low fatty acids n6 levels and low n6:n3 ratio, high levels of CLA, MUFAs, and oleic acid suggests that the heifer meat is favorable for human health.  相似文献   

7.
Genetic parameters for carcass traits of 1774 field progeny (1281 steers and 493 heifers), and their genetic relationships with feed efficiency traits of their sire population (740 bulls) were estimated with REML. Feed efficiency traits included feed conversion ratio (FCR) and residual feed intake (RFI). RFI was calculated by the residual of phenotypic (RFIphe) and genetic (RFIgen) regression from the multivariate analysis of feed intake on metabolic weight and daily gain. Progeny traits were carcass weight (CWT), rib eye area (REA), rib thickness (RBT), subcutaneous fat, yield estimate (YEM), marbling score (MSR), meat quality grade, meat color, fat color, meat firmness and meat texture. The estimated heritability for CWT (0.70) was high and heritabilities for all the other traits were moderate (ranged from 0.32 to 0.47), except for meat and fat color and meat texture which were low (ranged from 0.02 to 0.25). The high genetic correlation (0.62) between YEM and MSR suggests that simultaneous improvement of high carcass yield and beef marbling is possible. Estimated genetic correlations of RFI (RFIphe and RFIgen) of sires with CWT (− 0.60 and − 0.53) and MSR (− 0.62 and − 0.50) of their progeny were favorably negative indicating that the selection against RFI of sires may have contributed to produce heavier carcass and increase in beef marbling. The correlated responses in CWT, REA and RBT of progeny were higher to selection against RFI than those to selection against FCR of sires. This study provides evidence that selection against RFI is preferred over selection against FCR in sire population for getting better correlated responses in carcass traits of their progeny.  相似文献   

8.
A 2(3) factorial arrangement of treatments was utilized to determine effects of postweaning zeranol implantation, breed (Angus vs Limousin) and castration (bull vs steer) on growth, behavior and carcass traits. An initial slaughter group was used to account for breed differences in composition and to determine fat and lean growth in the 9-10-11th rib section (NTE). The remaining cattle were fed a finishing diet to a fat end point of .76 cm, as determined by a backfat probe. Control bulls outgained (P less than .01) control steers both to the first kill date and over the entire test and did not require significantly more time to reach the fat end point. The implant did not influence gain in bulls but did increase gain in steers. Angus and Limousins were similar in growth rate for the first 126 d before the first slaughter date. Limousins required more (P less than .01) time to reach the fat end point. Bulls and Limousins produced heavier (P less than .01) carcasses and larger rib eyes (P less than .05; bulls; P less than .01; Limousins). Steers and Angus had higher (P less than .01) marbling scores and lower bone maturity. Implanting decreased (P less than .05) marbling and increased carcass maturity. Small but significant shifts in carcass wholesale cut weight distribution were found between breed and sex condition groups. Bulls and Limousins had greater lean growth in the NTE. Bulls and steers were similar in fat growth, but Angus exceeded Limousin in this trait. Zeranol reduced scrotal circumference (P less than .01) and testicle weight at slaughter (P less than .05).(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

9.
This study was conducted to assess the effects of fermented total mixed ration (FTMR) on the growth performance, carcass and meat quality traits of Hanwoo steers. The present study evidenced that the FTMR had a strong effect on dry matter intake, body weight, daily gain, slaughter weight and carcass characteristics compared with control animals. The results showed that the dry matter intake (7.17 ± 0.13 kg), average body weight (615.20 ± 112.82 kg), and daily gain (0.56 ± 0.16 kg) were greater in animals receiving FTMR than in control animals (P < 0.05). The meat quality characteristics indicated that cooking loss and the pH values did not vary between control and FTMR treated animals; however, animals in the treated groups (FTMR) had higher meat quality grades, carcass weight (396.13 ± 18.35), fat thickness (13.25 ± 1.75), marbling score (5.63 ± 0.56), meat color (40.06 ± 1.23), crude fat (18.39 ± 1.32) and sensory characteristics (flavor 5.03 ± 0.17; tenderness 4.42 ± 0.33; juiciness 5.10 ± 0.16). Nevertheless, the shear force values decreased significantly in FTMR‐treated animals compared with control group steers. Overall, FTMR may not only improve the growth performance, biochemical metabolites, and fatty and acetic acid profiles of steers, but may also enhance the carcass and meat quality characteristics of Hanwoo steers. Regarding economics, our research findings suggest that FTMR‐based feeds may enhance Hanwoo steer meat quality at a low cost.  相似文献   

10.
A total of 144 male crossbred calves were allocated to four management treatments (bulls; steers; bulls implanted with zeranol at 100 d of age and re-implanted at 69, 93 and 56 d thereafter; bulls implanted with zeranol at 168 d of age and re-implanted at 93 and 56 d thereafter), and two pre-slaughter shipping treatments (minimum pre-slaughter stress with cattle shipped and slaughtered within 4 h of leaving the feedlot pen; moderate pre-slaughter stress with cattle mixed, trucked 160 km and slaughtered up to 24 h of leaving the feedlot pen) in a 4 X 2 factorial arrangement. Management treatment had no significant effect on carcass pH (45 min), carcass muscle temperature (45 min), or peak shear-force of cooked longissimus muscle. Steers had significantly lower dressing percentage, warm-carcass weight, hide weight and carcass-lean content, but higher marbling score, fat thickness and intramuscular-fat content than all treatments with bulls. Minimum pre-slaughter stress resulted in significantly lower dressing percentage, warm-carcass weight, and carcass pH (45 min), but generally had no effect on carcass tissue-yield measurements compared with the moderate stress treatment. Implanted bulls produced carcasses with significantly darker meat, higher 24-h pH and lower meat expressible juice than bulls and castrates for the moderate pre-slaughter stress treatment. These results provide evidence that zeranol implantation in bulls had a minor influence on carcass characteristics, and did not reduce the incidence of dark-cutting carcasses in young bulls subjected to moderate pre-slaughter shipping stress.  相似文献   

11.
Three sward heights (15, 25 and 35 cm) and three supplement types (energy, energy‐protein, and a mineral mix supplement) were evaluated in a 3 × 3 factorial arrangement distributed in a completely randomized design to study changes in forage search patterns in Nellore heifers in a continuous grazing system. Pasture data were collected using two replicates (paddocks) per treatment over four periods during the rainy season. The behavior assessments were made in the first and fourth grazing seasons. It was hypothesized that supplements and pasture management would modify ingestive behavior, considering that animals would require less time grazing if they had energy requirements met through higher digestibility of better managed paddocks, or use of supplements high in energy. Total and green forage masses along with green : dead material ratio were greater in treatments managed with higher sward heights. Sward managed with 35 cm height resulted in lower leaf : stem ratio compared with 15 cm sward height treatments. The animals on the 15 cm pastures spent more time grazing overall and during each meal, but there were no differences observed in meal numbers in comparison to 35 cm treatments. Heifers fed protein and/or energy supplements spent less time grazing in the early afternoon, but overall grazing time was the same for all animals.  相似文献   

12.
The objective of this study was to develop mathematical equations for describing the change in marbling in Japanese Black steers using longitudinal measurements. Serial ultrasound measurements were taken at 14, 16, 20, and 26 months of age and analyzed using an image analysis software. The longitudinal marbling measurements from the ultrasound images and carcasses were fitted into a nonlinear logistic curve. Data used for the analysis consisted of 749 steers that converged in nonlinear curve fitting and showed reasonable estimated parameters of the logistic curves. The average predicted mature beef marbling score (BMS) and maturation rate were 6.26 and 0.353, respectively, and the average maturity levels at 24 months of age were 83.9%. The heritability estimates for the predicted maturity traits were moderate, indicating that these traits may have potential for genetic improvement. There was a negative relationship between the expected progeny differences between carcass BMS and maturity traits, suggesting that genetic improvement by carcass BMS may lead to the selection of bulls with late maturity for marbling. The results indicate that ultrasound and model building for marbling can be useful tools to correctly select candidate bulls with high marbling in the early fattening period.  相似文献   

13.
Prediction of eventual carcass traits in stocker cattle at the conclusion of grazing could be useful for culling, co-mingling of animals, feedlot pen assignments, and making management decisions in the feedyard. Ultrasound measures of 12th to 13th rib longissimus area (ULA) and fat thickness (UFAT), and off-pasture BW (OPBW) were collected from yearling cattle (n = 261) at the conclusion of grazing in two experiments that evaluated stocking rate and grazing management effects on rye (Secale cereale L.) annual ryegrass (Lolium multiflorum Lam.) pastures. Carcasss data were subsequently recorded at harvest following feedyard finishing to a visual 1-cm backfat. Correlations were analyzed to determine relationships between carcass traits and ULMA, UFAT, body condition measure (BCM), and OPBW. Ultrasound measures, breed type (BRDT; n = 4), gender (steers and heifers), and feedlot days on feed (DOF) were evaluated in multiple regression models to determine whether these variables influence eventual carcass percentage retail product, kilograms retail product (KRP), hot carcass weight (HCW), and marbling score. Ultrasound FAT and BCM were negatively correlated with percentage retail product, KRP, and HCW and were positively correlated with marbling score. All reduced regression models had R2 values of between 0.15 and 0.63, and models with inputs of UFAT and OPBW consistently had the numerically greatest R2 values and least RMSE. Multiple regression analyses indicated that prediction of carcass traits from stocker cattle ultrasonic measurements at the conclusion of grazing were possible, but improvement in the models will be necessary to reduce error and improve reliability.  相似文献   

14.
Two experiments were conducted to investigate the effects of supplemental betaine on steer performance, fat deposition, and carcass characteristics. In Exp. 1 (grazing phase), 80 steers (317 kg) were fed either 1.0 kg of a control supplement (30% CP) or 1.0 kg of the control supplement plus 20 g of betaine per head per day. Betaine supplementation had no effect on overall gain or fat deposition (P>0.10) but increased ADG (P<0.10) during d 46 to 90 (0.64 vs 0.72 kg; control vs betaine, respectively). The pasture groups remained intact and were moved to the feedlot for 141 d and fed a control diet or the control diet plus 20 g of betaine per head per day. Betaine had no overall effect on finishing gain (P>0.10); however, this response was variable by period. Betaine increased final fat thickness and fat thickness change (P<0.10), but did not affect marbling or longissimus area (P>0.10). Supplemental betaine on pasture increased feed intake, final BW, and hot carcass weight (P<0.05) and increased final fat thickness and fat thickness change (P<0.10) during the finishing phase. In Exp. 2, supplemental betaine (40 g/d) was fed to steers (averaging 584 kg) in 11 replications during the last week before harvest. The overall weighted average increase in dressing percentage when betaine was fed was +0.34% (P<0.05). There was no effect (P>0.10) on fat thickness or marbling. Season of year did not affect response.  相似文献   

15.
Estimates of heritabilities and genetic correlations were obtained for weaning weight records of 23,681 crossbred steers and heifers and carcass records from 4,094 crossbred steers using animal models. Carcass traits included hot carcass weight; retail product percentage; fat percentage; bone percentage; ribeye area; adjusted fat thickness; marbling score, Warner-Bratzler shear force and kidney, pelvic and heart fat percentage. Weaning weight was modeled with fixed effects of age of dam, sex, breed combination, and birth year, with calendar birth day as a covariate and random direct and maternal genetic and maternal permanent environmental effects. The models for carcass traits included fixed effects of age of dam, line, and birth year, with covariates for weaning and slaughter ages and random direct and maternal effects. Direct and maternal heritabilities for weaning weight were 0.4 +/- 0.02 and 0.19 +/- 0.02, respectively. The estimate of direct-maternal genetic correlation for weaning weight was negative (-0.18 +/- 0.08). Heritabilities for carcass traits of steers were moderate to high (0.34 to 0.60). Estimates of genetic correlations between direct genetic effects for weaning weight and carcass traits were small except with hot carcass weight (0.70), ribeye area (0.29), and adjusted fat thickness (0.26). The largest estimates of genetic correlations between maternal genetic effects for weaning weight and direct genetic effects for carcass traits were found for hot carcass weight (0.61), retail product percentage (-0.33), fat percentage (0.33), ribeye area (0.29), marbling score (0.28) and adjusted fat thickness (0.25), indicating that maternal effects for weaning weight may be correlated with genotype for propensity to fatten in steers.  相似文献   

16.
Data from the first four cycles of the Germplasm Evaluation Program at the U.S. Meat Animal Research Center (USMARC) were used to investigate genetic relationships between mature weight (MW, n = 37,710), mature weight adjusted for body condition score (AMW, n = 37,676), mature height (HT, n = 37,123), and BCS (n = 37,676) from 4- to 8-yr old cows (n = 1,800) and carcass traits (n = 4,027) measured on their crossbred paternal half-sib steers. Covariance components among traits were estimated using REML. Carcass traits were adjusted for age at slaughter. Estimates of heritability for hot carcass weight (HCWT); percentage of retail product; percentage of fat; percentage of bone; longissimus muscle area; fat thickness adjusted visually; estimated kidney, pelvic, and heart fat percentage; marbling score; Warner-Bratzler shear force; and taste panel tenderness measured on steers were moderate to high (0.26 to 0.65), suggesting that selection for carcass and meat traits could be effective. Estimates of heritability for taste panel flavor and taste panel juiciness were low and negligible (0.05 and 0.01, respectively). Estimates of heritability from cow data over all ages and seasons were high for MW, AMW, and HT (0.52, 0.57, 0.71; respectively) and relatively low for BCS (0.16). Pairwise analyses for each female mature trait with each carcass trait were done with bivariate animal models. Estimates of genetic correlations between cow mature size and carcass composition or meat quality traits, with the exception of HCWT, were relatively low. Selection for cow mature size (weight and/or height) could be effective and would not be expected to result in much, if any, correlated changes in carcass and meat composition traits. However, genetic correlations of cow traits, with the possible exception of BCS, with HCWT may be too large to ignore. Selection for steers with greater HCWT would lead to larger cows.  相似文献   

17.
Real time ultrasound (RTU) measures of longissimus muscle area and fat depth were taken at 12 and 14 mo of age on composite bulls (n = 404) and heifers (n = 514). Carcass longissimus muscle area and fat depth, hot carcass weight, estimated percentage lean yield, marbling score, Warner-Bratzler shear force, and 7-rib dissectable seam fat and lean percentages were measured on steers (n = 235). Additive genetic variances for longissimus muscle area were 76 and 77% larger in bulls at 12 and 14 mo than the corresponding estimates for heifers. Heritability estimates for longissimus muscle area were 0.61 and 0.52 in bulls and 0.49 and 0.47 in heifers at 12 and 14 mo, respectively. The genetic correlations of longissimus muscle area of bulls vs heifers were 0.61 and 0.84 at 12 and 14 mo, respectively. Genetic correlations of longissimus muscle area measured in steer carcasses were 0.71 and 0.67 with the longissimus muscle areas in bulls and heifers at 12 mo and 0.73 and 0.79 at 14 mo. Heritability estimates for fat depth were 0.50 and 0.35 in bulls and 0.44 and 0.49 in heifers at 12 and 14 mo, respectively. The genetic correlation of fat depth in bulls vs heifers at 12 mo was 0.65 and was 0.49 at 14 mo. Genetic correlations of fat depth measured in bulls at 12 and 14 mo with fat depth measured in steers at slaughter were 0.23 and 0.21, and the corresponding correlations of between heifers and steers were 0.66 and 0.86, respectively. Live weights at 12 and 14 mo were genetically equivalent (r(g) = 0.98). Genetic correlations between live weights of bulls and heifers with hot carcass weight of the steers were also high (r(g) > 0.80). Longissimus muscle area measured using RTU was positively correlated with carcass measures of longissimus muscle area, estimated percentage lean yield, and percentage lean in a 7-rib section from steers. Measures of backfat obtained using RTU were positively correlated with fat depth and dissectable seam fat from the 7-rib section of steer carcasses. Genetic correlations between measures of backfat obtained using RTU and marbling were negative but low. These results indicate that longissimus muscle area and backfat may be under sufficiently different genetic control in bulls vs heifers to warrant being treated as separate traits in genetic evaluation models. Further, traits measured using RTU in potential replacement bulls and heifers at 12 and 14 mo of age may be considered different from the corresponding carcass traits of steers.  相似文献   

18.

A study was conducted in Hanang District to assess potential for on-farm feedlot finishing of Tanzanian Shorthorn Zebu (TSHZ) in dry season using locally available feed resources. A total of 65 (2–3 years old, 150–250 kg LWT) steers were randomly distributed into two dietary treatments in three villages. The steers were finished either in feedlots using compounded diets or under free grazing in accordance with farmers’ practice. Following 90 days of feeding, all steers were slaughtered for detailed carcass and meat quality assessment. Growth performance, carcass and meat quality of experimental animals were assessed to determine feedlot performance of TSHZ. Results show that average daily gain of feedlot-finished animals (620 g/day) was nearly three-fold higher (P = 0.042) than that of grazed steers (223 g/day). Feedlot-finished steers produced 28 kg (P = 0.001) heavier carcasses than grazed ones. Carcasses from feedlot-finished steers cooled slowly as they had higher (P = 0.001) temperatures than that of grazed ones at 45 min (33.1 vs. 30.5 °C) and 6 h (21.0 vs. 19.5 °C) post-mortem. Feedlot-finished steers produced beef with higher (P = 0.003) marbling scores (3.4) than grazed ones (2.4). As a result, beef from the feedlot-finished steers was more tender (P = 0.016) than that from grazed ones, and it required 13 N less force to shear. It is concluded that TSHZ responds positively to improved feeding with significant enhancement on carcass gain and meat quality. Use of diets compounded using agro-processing by-products, instead of whole grain, can lower the cost of finishing TSHZ steers significantly.

  相似文献   

19.
Leptin is the hormone product of the obese gene that is synthesized and predominantly expressed by adipocytes. This study estimated the genetic variation in serum leptin concentration and evaluated the genetic and phenotypic relationships of serum leptin concentration with performance, efficiency of gain, and carcass merit. There were 464 steers with records for serum leptin concentration, performance, and efficiency of gain and 381 steers with records for carcass traits. The analyses included a total of 813 steers, including those without phenotypic records. Phenotypic and genetic parameter estimates were obtained using SAS and ASREML, respectively. Serum leptin concentration was moderately heritable (h2 = 0.34 +/- 0.13) and averaged 13.91 (SD = 5.74) ng/mL. Sire breed differences in serum leptin concentration correlated well with breed differences in body composition. Specifically, the serum leptin concentration was 20% greater in Angus-sired steers compared with Charolais-sired steers (P < 0.001). Consequently, ultrasound backfat (27%), carcass 12th-rib fat (31%), ultrasound marbling (14%), and carcass marbling (15%) were less in Charolais- than Angus-sired steers (P < 0.001). Conversely, carcass LM area (P = 0.05) and carcass lean meat yield (P < 0.001) were greater in Charolais- compared with Angus-sired steers. Steers with greater serum leptin concentration also had greater DMI (P < 0.001), greater residual feed intake (P = 0.04), and partial efficiency of growth (P = 0.01), but did not differ in feed conversion ratio (P > 0.10). Serum leptin concentration was correlated phenotypically with ultrasound backfat (r = 0.41; P < 0.001), carcass 12th-rib fat (r = 0.42; P < 0.001), ultrasound marbling (r = 0.25; P < 0.01), carcass marbling (r = 0.28; P < 0.01), ultrasound LM area (r = -0.19; P < 0.01), carcass LM area (r = -0.17; P < 0.05), lean meat yield (r = -0.38; P < 0.001), and yield grade (r = 0.32; P < 0.001). The corresponding genetic correlations were generally greater than the phenotypic correlations and included ultrasound backfat (r = 0.76 +/- 0.19), carcass 12th-rib fat (r = 0.54 +/- 0.23), ultrasound marbling (r = 0.27 +/- 0.22), carcass marbling (r = 0.76 +/- 0.21), ultrasound LM area (r = -0.71 +/- 0.19), carcass LM area (r = -0.75 +/- 0.20), lean meat yield (r = -0.59 +/- 0.22), and yield grade (r = 0.39 +/- 0.26). Serum leptin concentration can be a valuable tool that can be incorporated into appropriate selection programs to favorably improve the carcass merit of cattle.  相似文献   

20.
The objective of this study was to evaluate the effect of growth implants on the carcass characteristics and tenderness of steers and heifers with different genetic potentials for growth, lean meat yield production, and marbling. Two experiments were conducted. Experiment 1 evaluated Angus steers sired by bulls with high EPD for retail product yield or marbling. Implant treatment was imposed randomly within sire groups. Loins (Institutional Meat Purchasing Specifications 180) were collected from each carcass and cut into three 2.54-cm steaks aged for 7, 14 and 21 d to evaluate tenderness. The second experiment evaluated steers and heifers of British and Continental breed descent. Steers and heifers were slaughtered after 120 d on feed. Loin sections were collected, and one 2.54-cm steak aged 7 d was used for tenderness analysis. When implants were used in Angus steers, HCW and LM area increased, whereas internal fat and marbling decreased (P < 0.01). In Angus steers, sire type did not affect shear force values of steaks; however, implant use significantly increased shear force values (P < 0.01). Carcasses from cattle of Continental breed descent were significantly heavier than carcasses of British breed descent with larger LM area, slightly less fat, and a reduced yield grade (P < 0.01). Also, steer carcasses were heavier than heifer carcasses with larger LM (P < 0.05), but no effect of sex on fat depth, internal fat, yield grade or marbling was observed. No significant interactions were seen between growth implant and breed or between growth implant and sex for shear force values. Shear force values were significantly less for steaks from steers and heifers of British decent compared with steers and heifers of Continental descent (P < 0.01). Steaks from implanted steers and heifers had significantly (P < 0.01) greater shear force values than steaks from steers and heifers not implanted. Use of growth implants in growing cattle resulted in significantly heavier carcass weights, larger LM area, and reduced internal fat. However, implant use also reduced the amount of marbling along with contributing to reduced tenderness. Complicating the tenderness issue is the increased shear force values reported for heifers as well as steers of Continental breed descent. Use of implants may contribute to tenderness variability because of different animal responses to implants.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号