首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Two field experiments investigated the effect of tilled and untilled soil below the seed and the effect of a press wheel on the emergence of wheat (Triticum aestivum L.) seedlings on a hardsetting soil at Tatura, Victoria, Australia. Soil physical properties of the seedbed including penetrometer resistance, temperature and water content were recorded. The fate of seeds and seedlings and the length of roots were determined. In the experiments, germination was high (over 90%) and was not affected by the depth of tillage, the press wheel or by temporary waterlogging, but several physical conditions of the soil restricted emergence. In the first experiment, the rate and final emergence (at Day 10) was increased by tillage below the seed (e.g. at 46–90 mm depth) in spite of the penetrometer resistance of soil at 0–20 mm depth being 50% greater than that in the treatment untilled below the seed. The roots of the seedlings in the treatments untilled below the seed were temporarily waterlogged (at Days 0–1) and grew in soil that was drier (at Days 3–9) and harder than in treatments tilled below the seed. In the second experiment, the press wheel increased the rate of emergence by decreasing the sowing depth by 10 mm. Tillage below the seed increased the rate of emergence by decreasing the penetrometer resistance of the soil to less than 2.0 MPa.  相似文献   

2.
Soil wettability is especially important for rainfed agriculture in climates with a dry period during the growing season. The effect of aggregate structure and soil organic C content on wettability of soil aggregates was determined for grassland (grass) and tilled fields (tillage). Soil organic C, plastic limit, aggregate total porosity, and wettability at 100 mm (rapid wetting) and 300 mm (slow wetting) water tension were measured on soil at 0–0.2 m depth. Natural aggregates from tillage and grass were compared to soil pellets formed by remolding aggregates. At both tensions, wettability of grass aggregates was significantly greater than that of tillage aggregates (P ≤ 0.001). Pellets were significantly less wettable than natural aggregates at 300 mm tension and during the initial wetting at 100 mm tension, but became significantly more wettable with time at 100 mm tension. Cumulative water uptake during 60 min exceeded the initial total porosity of pellets and natural tillage aggregates, suggesting incipient failure (formation of microcracks) during fast wetting. Grass aggregates contained twice as much organic C as tillage aggregates (26 g kg−1 versus 13 g kg−1). Organic C was linearly and positively related to plastic limit, total porosity, and the wettability of natural aggregates at 300 mm tension. At 100 mm tension, organic C was negatively related to wettability of natural aggregates under grass, but unrelated to wettability under tillage. Aggregate wettability was positively related to organic carbon content, except when the arrangement of soil constituents reduced or prevented incipient failure and soil dispersion during rapid wetting resulted in cumulative water uptake (60 min) similar to initial aggregate total porosity. Organic C increased wettability of grass aggregates when compared to tillage aggregates and also stabilized natural aggregates during fast wetting (100 mm tension). Both soil organic C content and aggregate structure were key factors controlling aggregate stability and wettability.  相似文献   

3.
Several previous field studies in temperate regions have shown decreased soil respiration after conventional tillage compared with reduced or no‐tillage treatments. Whether this decrease is due to differences in plant residue distribution or changes in soil structure following tillage remains an open question. This study investigated (1) the effects of residue management and incorporation depth on soil respiration and (2) biological activity in different post‐tillage aggregates representing the actual size and distribution of aggregates observed in the tilled layer. The study was conducted within a long‐term tillage experiment on a clay soil (Eutric Cambisol) in Uppsala, Sweden. After 38 y, four replicate plots in two long‐term treatments (moldboard plowing (MP) and shallow tillage (ST)) were split into three subplots. These were then used for a short‐term trial in which crop residues were either removed, left on the surface or incorporated to about 6 cm depth (ST) or at 20 cm depth (MP). Soil respiration, soil temperature, and water content were monitored during a 10‐d period after tillage treatment. Respiration from aggregates of different sizes produced by ST and MP was also measured at constant water potential and temperature in the laboratory. The results showed that MP decreased short‐term soil respiration compared with ST or no tillage. Small aggregates (< 16 mm) were biologically most active, irrespective of tillage method, but due to their low proportion of total soil mass they contributed < 1.5% to total respiration from the tilled layer. Differences in respiration between tillage treatments were found to be attributable to indirect effects on soil moisture and temperature profiles and the depth distribution of crop residues, rather than to physical disturbance of the soil.  相似文献   

4.
Maize was grown for 1 season as a row-crop on raised beds in a factorial experiment on reduced tillage. The effects of 2 passes of a spring-tined cultivator (Treatment C), of a small 70-mm wide rotary-hoe, ahead of the seeder (Treatment R) and of a mulch (Treatment M) on emergence, growth and yield of maize were determined. Treatment C produced a coarse tilth (41% aggregates > 20-mm diameter; 9% aggregates 0.5–2 mm) in the top 30 mm of pre-irrigated beds of a silty soil. Treatment R produced a fine seed-bed (4% aggregates > 20-mm diameter; 21% aggregates 0.5–2 mm), 70 mm wide and 30 mm deep, along each of the 2 sowing-lines. In the same pass, 2 rows of maize were sown at a depth of 25 mm into the wet soil.

In the mulched treatments (M), where 5 t ha−1 of barley straw was applied after the crop was sown, to cover the bed, the water content around the seed (0–30-mm depth) over the first 9 days after the crop was sown was 29–74% higher than in the unmulched treatments (M0). For example, 1 day after the crop was sown, the water content of soil around the seed was 21% in Treatment M, close to field capacity, and 14% in Treatment M0. In Treatment M, the temperature around the seed (25-mm depth) at 15.00 h over the first 9 days after the crop was sown was almost always significantly lower than in Treatment M0; for example, the maximum temperatures of Treatments M and M0 were 32 and 41°C, respectively.

Either Treatment M or R, but not Treatment C hastened emergence of maize seedlings and increased percentage final emergence. There were no significant effects of any treatments on plant yield. However, there was a trend within Treatment M for either Treatments R or C to increase yields.  相似文献   


5.
Low and extremely variable precipitations limit dryland crop production in the semi-arid areas of Aragón (NE Spain). These areas are also affected by high annual rates of topsoil losses by both wind and water erosion. A long-term experiment to determine the feasibility of conservation tillage in the main winter barley production areas of Aragón was initiated in 1989 at four locations, three on loam to silt loam soils (Xerollic Calciorthid) and one on a silty clay loam (Fluventic Ustochrept), receiving between 300 and 600 mm of average annual rainfall. In this study, we compared, under both continuous cropping and cereal-fallow rotation, the effects of conventional tillage (mouldboard plough) and two conservation tillage systems, reduced tillage (chisel plough) and no-tillage, on soil water content and penetration resistance during the first two growing seasons. Whereas reduced and conventionally tilled treatments generally had similar soil water content during the experimental period, the effects of no-tillage were inconsistent. No-tilled plots had from 26% less to 17% more stored soil water (0–80 cm) than conventional tilled plots at the beginning of the growing season. In contrast to the conventional and reduced tillage treatments, penetration resistances were between 2 and 4 MPa after sowing in most of the plough layer (0–40 cm) under no-tillage at all sites. Fallow efficiencies in moisture storage in the cereal-fallow rotation, when compared with the continuous cropping system, ranged from −8.7 to 12%. The highest efficiencies were recorded when the rainfall in the months close to primary tillage exceeded 100 mm. Since this event is very unlikely, long fallowing (9–10 months) appears to be an inefficient practice for water conservation under both conventional and conservation management. Our results suggest that, up to now, only reduced tillage could replace conventional tillage without adverse effects on soil water content and penetration resistance in the dryland cereal-growing areas of Aragón.  相似文献   

6.
To study the effect of different soil tillage practices and the consequences of soil deformation on the functioning of the pore system, we performed unsaturated leaching experiments (by applying a suction of −10 kPa) on undisturbed soil columns from the Ap-horizon of a luvisol derived from glacial till (agricultural site at Hohenschulen, North Germany). We compared two different tillage practices (conventionally tilled to 30 cm depth, and conservational chiselled to a depth of 8 cm-Horsch system) with respect to soil strength, pore connectivity and their effect on the fate of surface-applied fertilisers. The soil strength was measured by determining the precompression stress value (PCV). The conventionally tilled topsoil had a PCV of 21 kPa at a pore water potential of −6 kPa, while the conservation treatment resulted in a slightly higher PCV of 28 kPa, suggesting a slowly increasing soil strength induced by the formation of aggregates under reduced tillage practice.

The leaching experiments were modelled using the convection dispersion equation (CDE) and a modified version of the mobile–immobile approach (MIM), which included three water fractions: mobile, immobile and totally immobile water. From the CDE mobile water fractions (θm) ranging from 47 to 67% were found, and θm was slightly higher in the ploughed seedbed compared to the conservation-tilled one. This could be due to higher aggregation in the latter one. Dispersivities were relatively large, ranging from 44 to 360 mm, but no difference was found for the treatments. The MIM could simulate the drop in concentration when leaching was interrupted, but overall did not improve the simulation, despite the larger number of fitting parameters.

Compacting the soil with loads of 70 kPa prior to the leaching experiment did not affect solute transport in the conservational tilled soil. In the conventional-tilled soil, however, the dispersivity decreased and the mobile water content increased compared to the non-compacted soil, suggesting that the former one is less prone to deformation by mechanical loads.  相似文献   


7.
Reduced tillage methods for field crop production result in less disruption of soil structure and often increased amounts of crop residue maintained on the soil surface. The combination of these two factors produces increased surface soil aggregation. This study was conducted in the field and within pots to determine whether surface residue by itself improves soil aggregation within a short period of time. The soil was a silt loam loess deposit in the Pacific Northwest, USA, where summers are hot and dry, and most precipitation (420 mm) is received during the mild winters. Two pot studies were conducted over winter, one under a shelter with controlled irrigations (183 mm), and the other outdoors receiving natural precipitation (77 mm). In both pot studies 640 g m−2 wheat (Triticum aestivum L.) residue was either placed on the surface of the soil or thoroughly mixed into the soil. The field study was conducted on plots where, for the past 7 years, wheat crop residues were either incorporated through chisel/disk tillage or removed before tillage and replaced on the surface after tillage. The field study included plots where wheat was grown with no tillage. In the pots, there was no significant effect due to residue treatment on aggregate mean weight diameter, measured monthly for 4 winter months. This was true despite dissolved organic carbon being leached from the surface residue. In the 7-year-old field plots, replacing residues on the surface resulted in slightly greater mean weight diameter of aggregates at 5–10 cm depth compared to the mixed residue treatment. The no-till plots had significantly greater mean weight diameter at 0–5 cm depth than either tilled treatment. Our conclusion is that surface residue by itself failed to increase aggregation of tilled surface soil within the first rainy season after tillage.  相似文献   

8.
Soil structure and the effect of management practices   总被引：7，自引：0，他引：7  
To evaluate the impact of management practices on the soil environment, it is necessary to quantify the modifications to the soil structure. Soil structure conditions were evaluated by characterizing porosity using a combination of mercury intrusion porosimetry, image analysis and micromorphological observations. Saturated hydraulic conductivity and aggregate stability were also analysed.

In soils tilled by alternative tillage systems, like ripper subsoiling, the macroporosity was generally higher and homogeneously distributed through the profile while the conventional tillage systems, like the mouldboard ploughing, showed a significant reduction of porosity both in the surface layer (0–100 mm) and at the lower cultivation depth (400–500 mm). The higher macroporosity in soils under alternative tillage systems was due to a larger number of elongated transmission pores. Also, the microporosity within the aggregates, measured by mercury intrusion porosimetry, increased in the soil tilled by ripper subsoiling and disc harrow (minimum tillage). The resulting soil structure was more open and more homogeneous, thus allowing better water movement, as confirmed by the higher hydraulic conductivity in the soil tilled by ripper subsoiling. Aggregates were less stable in ploughed soils and this resulted in a more pronounced tendency to form surface crust compared with soils under minimum tillage and ripper subsoiling.

The application of compost and manure improved the soil porosity and the soil aggregation. A better aggregation indicated that the addition of organic materials plays an important role in preventing soil crust formation.

These results confirm that it is possible to adopt alternative tillage systems to prevent soil physical degradation and that the application of organic materials is essential to improve the soil structure quality.  相似文献   


9.
Abstract. Changes in aggregate stability, density, and porosity as well as the water retention and nutrient contents of different aggregate size fractions due to intensive tillage were investigated. Three soils from Vicarello, Fagna and Gambassi in North Central Italy which had been under permanent vegetation, minimum or conventional tillage for more than seven years were studied. The aggregates on conventionally tilled plots were slightly denser and less porous than those on the untilled or minimum-tilled plots. The aggregates were less stable under conventional tillage on all soils. Conventional tillage reduced the proportion or macro-aggregates by 22% at Vicarello and 35% at Gambassi. There were no differences in macro-aggregate proportions between minimum- and conventionally tilled plots at Fagna. The potential of the dry aggregates to distintegrate upon contact with water was greatest in the conventionally tilled and least in the untilled treatments. The proportions of dry macro-aggregates (> 0.25 mm) in the untilled and tilled plots were 90 and 71%, respectively. The soil of the tilled plots contained less carbon and nitrogen than that of the untilled plots in all aggregate size fractions. The silt-plus-clay contents of the aggregates accounted for between 65 and 93% of variability in the water they retained at small potentials while organic carbon contents accounted for between 71 and 90% of variability in the stability of the aggregates irrespective of the tillage treatments.  相似文献   

10.
The initially high level of soil compaction in some direct sowing systems might suggest that the impact of subsequent traffic would be minimal, but data have not been consistent. In the other hand on freshly tilled soils, traffic causes significant increments in soil compaction. The aim of this paper was to quantify the interaction of the soil cone index and rut depth induced by traffic of two different weight tractors in two tillage regimes: (a) soil with 10 years under direct sowing system and (b) soil historically worked in conventional tillage system. Treatments included five different traffic frequencies (0, 1, 3, 5 and 10 passes repeatedly on the same track). The work was performed in the South of the Rolling Pampa region, Buenos Aires State, Argentina at 34°55′S, 57°57′W. Variables measured were (1) cone index in the 0–600 mm depth profile and (2) rut depth. Tyre sizes and rut depth/tyre width ratio are particularly important respect to compaction produced in the soil for different number of passes. Until five passes of tractor (2WD), ground pressure is responsible of the topsoil compaction. Until five passes the tyre with low rut depth/tyre width ratio reduced topsoil compaction. Finally, the farmer should pay attention to the axle load, the tyre size and the soil water content at the traffic moment.  相似文献   

11.
Prediction of the soil structures produced by tillage   总被引：1，自引：0，他引：1  
Data are presented for the amount of clods >50 mm produced when five different soils were tilled at a range of different, naturally occurring water contents. The optimum water content for soil tillage is defined as that at which the amount of clods produced is minimum. The amount clods produced at this optimum water content is shown to be linearly and negatively correlated with the value of Dexter's index S of soil physical quality. This results in a rational model for soil tillage that enables predictions to be made for all different soils and conditions. Pedo-transfer functions can be used to estimate the input parameters for the model for cases, for which measured values are not available. It is concluded that for soils with good physical condition (i.e. S > 0.035), no clods >50 mm are produced during tillage.  相似文献   

12.
In developing management practices to reduce chemical leaching below the root zone, tillage and irrigation management are important considerations. Two studies were performed to evaluate the movement of bromide in tilled and non-tilled soils under sprinkler versus flood irrigation. In each study, bromide was applied either with an irrigation or presprayed to the soil surface followed by periodic soil sampling to monitor the bromide movement. Tillage was observed to reduce the mean depth of chemical penetration under both irrigation treatments and reduce the spatial variation of bromide concentration under flood irrigation. For example, after 30 days of periodic flood irrigation, 25% of the applied bromide remained in the upper 0.2 m of a tilled soil while in the companion non-tilled soil virtually no bromide remained above this depth. The most rapid bromide movement was observed in non-tilled, flood irrigated soil, particularly when the solute was added with the irrigation. We speculate that the tillage effect of reduced leaching results from the alteration of pore continuity and creation of diffusional sinks and not increased evaporative water loss in the tilled soil. The Root Zone Water Quality Model was calibrated using site-specific hydraulic property measurements and used to predict the solute movement. The model predictions were fairly accurate for the sprinkler irrigated soil but less satisfactory for the flood irrigation studies. In comparing the effect on chemical leaching of the treatments imposed, we found that tillage and the timing of the chemical application had greater impact on reducing leaching than did the method of irrigation.  相似文献   

13.
Chisel ploughing is considered to be a potential conservation tillage method to replace mouldboard ploughing for annual crops in the cool-humid climate of eastern Canada. To assess possible changes in some soil physical and biological properties due to differences in annual primary tillage, a study was conducted for 9 years in Prince Edward Island on a Tignish loam, a well-drained Podzoluvisol, to characterize several mouldboard and chisel ploughing systems (at 25 cm), under conditions of similar crop productivity. The influence of primary tillage on the degree of soil loosening, soil permeability, and both organic matter distribution throughout the soil profile and organic matter content in soil particle size fractions was determined. At the time of tillage, chisel ploughing provided a coarser soil macrostructure than mouldboard ploughing. Mouldboard ploughing increased soil loosening at the lower depth of the tillage zone compared to chisel ploughing. These transient differences between primary tillage treatments had little effect on overall soil profile permeability and hydraulic properties of the tilled/non-tilled interface at the 15–30 cm soil depth. Although soil microbial biomass, on a volume basis, was increased by 30% at the 0–10 cm soil depth under chisel ploughing, no differences were evident between tillage systems over the total tillage depth. Mouldboard ploughing increased total orgainc carbon by 43% at the 20–30 cm soil depth, and the carbon and nitrogen in the organic matter fraction ≤ 53 μm by 18–44% at the 10–30 cm soil depth, compared to chisel ploughing.  相似文献   

14.
Average in-field water application efficiency in furrow-irrigated cotton (Gossypium hirsutum L.) in Australia is less than optimal, and The underlying reasons may include surface sealing, exposure of sodic soil by laser levelling, and soil compaction due to wheel-trafficking. The objective of this study was to quantify the effects of reducing traffic and tillage intensity on furrow soil properties in an irrigated Vertisol. Soil was sampled during the growing seasons of 2001–02, 2003–04 and 2005–06 from the surface 50-mm of adjacent wheel-tracked and non-wheel-tracked furrows in an experiment in north-western New South Wales, Australia. The treatments were: cotton sown either after conventional tillage (disc-ploughing and incorporating cotton stalks to 0.2 m, chisel ploughing to 0.3 m followed by bed construction) or on “permanent beds” (slashing cotton plants after harvest, followed by root cutting and bed renovation with a disc-hiller). Irrigation water was alkaline but had low salinity and sodium adsorption ratio. Soil properties measured were pH, EC1:5, geometric mean diameter (GMD) and specific volume (SV) of dry soil aggregates, exchangeable cations and plastic limit. Permanent bed systems had generally lower pH and higher SOC than conventionally tilled furrows, although differences were small. Soil pH and SOC averaged over the three growing seasons was 6.9 and 0.89 g/100 g, respectively, in permanent bed furrows, and 7.1 and 0.84 g/100 g, respectively, in conventionally tilled furrows. Compared to non-wheel-tracked furrows, plastic limit was lower (0.24 vs. 0.25 g/g), and EC1:5 (0.24 vs. 0.20 dS/m) and GMD (2.6 vs. 2.1 mm) higher in wheel-tracked furrows. Intra-seasonal changes in soil properties of furrows were also small, and are unlikely to significantly affect any hydrological processes. Inter-seasonal differences were, however, significant, and could affect hydrological processes in this soil.  相似文献   

15.
Soil tilth has been defined in terms of a ‘Physical Index’ based on the product of the ratings of eight physical properties — soil depth, bulk density, available water storage capacity, cumulative infiltration or apparent hydraulic conductivity, aggregation or organic matter, non-capillary pore space, water table depth and slope. The Physical Index and a tillage guide were used to identify the tillage requirements of different soils varying in texture from loamy sand to clay in the semi-arid tropics. The physical index was 0.389 for a loamy sand, 0.518 for a black clay loam and 0.540 for a red sandy loam soil and the cumulative rating indices in summer and winter seasons were 45 and 44 for loamy sand, 52 and 51 for red sandy loam and 54 and 52 for black clay loam soils, respectively. The compaction of the loamy sand by eight passes of a 490 kg tractor-driven roller (0.75 m diameter and 1.00 m length) increased the physical index to 0.658 and chiselling of the red sandy loam and black clay loam increased the physical indices to 0.686 and 0.729, respectively. The grain yields of rainfed pearl millet and guar and irrigated pearl millet, wheat and barley increased significantly over the control (no compaction) yields by compaction.

The chiselling of the soils varying in texture from loamy sand to clay at 50 to 120-cm intervals up to 30–40 cm depth, depending upon the row spacing of seedlines and depth of the high mechanical impedance layer, increased the grain yields of rainfed and irrigated maize on alluvial loamy sand, rainfed maize on alluvial sandy loam and red sandy loam, rainfed sorghum on red sandy loam and black clay loam, irrigated sorghum on black clay loam and rainfed black gram on red sandy loam, pod yield of rainfed groundnut, tuber yield of irrigated tapioca and fresh fruit yield of rainfed tomato on red sandy loam and sugarcane yield on black clay soil, significantly over the yields of no-chiselling systems of tillage such as disc harrow and country plough.  相似文献   


16.
Networks of biopores created by plant and animal activity might accumulate in untilled cropping systems. These would be relatively well connected to the soil surface. The objective of this study was to count biopores after long-term no-till in comparison to recently tilled soil. Biopores were counted and measured to 80 cm depth at 10 cm increments in plots either under no-till wheat production for 1 year or for 17 years, and receiving zero or 130 kg ha−1 N. The measurements were repeated using different photographic methods with increased resolution. The only significant difference between the long and short term no-till was in biopore sizes over 1 mm diameter, where long-term no-till produced from 30 to 100% more biopores, probably caused by increased earthworm activity. Over 99% of biopores measured were less than 1 mm diameter. There was no difference between tillage or N treatments in the number of these smaller biopores at any depth. This means small biopores did not accumulate either above or below the plow layer in an untilled cropping system. Improved resolution in the second set of measurements produced a 100-fold increase in detection of biopores in the 0.3–0.5 mm range. This provides evidence that a substantial portion of biopores are very small and were missed in the first year of this study and perhaps in other studies of this type. It is hypothesized that biopores of 0.05–0.5 mm diameter make up over half of total biopore volume and might have a significant role in movement of water and gases.  相似文献   

17.
Under semiarid Mediterranean climatic conditions, soils typically have low organic matter content and weak structure resulting in low infiltration rates. Aggregate stability is a quality indicator directly related to soil organic matter, which can be redistributed within soil by tillage. Long-term effects (1983–1996) of tillage systems on water stability of pre-wetted and air dried aggregates, soil organic carbon (SOC) stratification and crop production were studied in a Vertic Luvisol with a loam texture. Tillage treatments included conventional tillage (CT), minimum tillage (MT) and zero tillage (ZT) under winter wheat (Triticum aestivum L.) and vetch (Vicia sativa L.) rotation (W–V), and under continuous monoculture of winter wheat or winter barley (Hordeum vulgare L.) (CM). Aggregate stability of soil at a depth of 0–5 cm was much greater when 1–2 mm aggregates were vacuum wetted prior to sieving (83%) than when slaked (6%). However, slaking resulted in tillage effects that were consistent with changes in SOC. Aggregate stability of slaked aggregates was greater under ZT than under CT or MT in both crop rotations (i.e., 11% vs. 3%, respectively).

SOC under ZT tended to accumulate in the surface soil layer (0–5 and 5–10 cm) at the expense of deeper ones. At depths of 10–20 and 20–30 cm no differences in SOC were encountered among tillage systems, but CT exhibited the highest concentration at 30–40 cm depth. Nevertheless, when comparisons were made on mass basis (Mg ha−1), significant differences in stocked SOC were observed at depths of 0–10 and 0–20 cm, where ZT had the highest SOC content in both rotations. The stock of SOC to a depth of 40 cm, averaged across crop rotations, was greater under ZT (43 Mg ha−1) than under CT (41 Mg ha−1) and MT (40 Mg ha−1) although these figures were not significantly different. Likewise, no significant differences were encountered in the stock of SOC to a depth of 40 cm among crop rotations (i.e., 42 Mg ha−1 for W–V vs. 40 Mg ha−1 for CM).

Crop production with wheat–vetch and continuous cereal showed no differences among tillage systems. Yields were strongly limited by the environmental conditions, particularly the amount of rainfall received in the crop growth season and its distribution. Similar yield and improved soil properties under ZT suggests that it is a more sustainable system for the semiarid Mediterranean region of Spain.  相似文献   


18.
Micro and macroporosity, pore shape and size distribution, aggregate stability, saturated hydraulic conductivity and crop yield were analysed in alluvial silty loam (Fluventic Eutrochrept) and clay soils (Vertic Eutrochrept) following long-term minimum and conventional tillage. The soil structure attributes were evaluated by characterizing porosity by means of image analysis of soil thin sections prepared from undisturbed soil samples.

The interaggregate microporosity, measured by mercury intrusion porosimetry, increased in the minimally tilled soils, with a particular increase in the storage pores (0.5–50 μm). The amount of elongated transmission pores (50–500 μm) also increased in the minimally tilled soils. The resulting soil structure was more open and more homogeneous, thus allowing better water movement, as confirmed by the greater hydraulic conductivity of the minimally tilled soils. The aggregate stability was less in the conventionally tilled soils and this resulted in a greater tendency to form surface crusts and compacted structure, compared with the minimally tilled soils. The latter tillage practice seemed to maintain, in the long-term, better soil structure conditions and, therefore, maintain favourable conditions for plant growth. In the silt loam, the crop yield did not differ significantly between the two tillage systems, while in the clay soil it decreased in the minimum tilled soil because of problems of seed bed preparation at the higher surface layer water content.  相似文献   


19.
Tillage effects on near-surface soil hydraulic properties   总被引：1，自引：0，他引：1  
The processes for the formation of porosity are thought to differ between tilled and non-tilled cropping systems. The pores are created primarily by the tillage tool in the tilled systems and by biological processes in non-tilled systems. Because of the different methods of pore formation, the pore size distribution, pore continuity and hydraulic conductivity functions would be expected to differ among tillage systems. The objective of this study was to determine effects of three tillage systems — mold-board plow (MP), chisel plow (CP), and no-till (NT) — on hydraulic properties of soils from eight long-term tillage and rotation experiments. Tillage effects on saturated and unsaturated hydraulic conductivity, pore size distribution, and moisture retention characteristics were more apparent for soils with a continuous corn (CC) rotation than for either a corn-soybean (CS) rotation or a corn-oats-alfalfa (COA) rotation. Pore size distributions were similar among tillage systems for each soil except for three soils with a CC rotation. The MP system increased volume of pores >150 μm radius by 23% to 91% compared with the NT system on two of the soils, but the NT system increased the volume of the same radius pore by 50% on one other soil. The NT system had 30 to 180% greater saturated hydraulic conductivity than either the CP or MP systems. The NT system with a CC rotation showed a greater slope of the log unsaturated hydraulic conductivity; log volumetric water content relationship on two of the soils indicating greater water movement through a few relatively large pores for this system than for either the CP or MP systems.  相似文献   

20.
吉林省西部不同耕作模式下秸秆还田土壤团聚体特征   总被引：2，自引：0，他引：2  
  【目的】  通过研究不同耕作模式下土壤团聚体特征，探明耕作模式对土壤团聚体质量指标的影响，为解决区域长期传统耕作模式所引起的土壤结构质量下降问题及构建土壤合理耕作层提供科学依据。  【方法】  从2016年10月开始，在吉林省西部松原市宁江区开展田间试验，采用随机区组设计，将耕作结合秸秆还田设置了4个处理，分别为常规耕作 (秸秆清除后进行旋耕，LR)、连续旋耕 (秸秆粉碎还田后进行旋耕，SR)、翻耕–旋耕 (秸秆粉碎还田后，轮流进行翻耕和旋耕，STR)、翻耕–免耕 (秸秆粉碎还田后，轮流进行翻耕和免耕，STN)处理。于2018年10月采集0—20和20—40 cm土层土壤样品，分析了土壤团聚体组成分布、团聚体稳定性及团聚体各粒级有机碳含量。  【结果】  与LR处理相比，秸秆还田可明显改善土壤团聚体结构及稳定性 (P < 0.05)。秸秆还田条件下，STR和STN土壤中大于0.25 mm的机械稳定性团聚体含量比连续旋耕 (SR) 处理显著增加10.6% (P < 0.05)。与LR处理相比，STR和STN处理耕层土壤机械稳定性团聚体几何平均直径 (GMD) 明显提高，而STR和STN处理土壤团聚体分形维数（D）平均降低3.9%，耕层不稳定团粒指数 (Elt) 也显著降低。STN处理 在0—20 cm土层具有较高的土壤团聚体有机碳含量。  【结论】  秸秆还田下，两种轮耕模式具有更高的团聚体稳定性，且有较小的分形维数，进而具有较好的抗蚀能力，其中翻耕–免耕轮耕模式团聚体稳定性更好，耕层土壤中团聚体有机碳含量更高。因此，翻耕–免耕轮耕模式是吉林省西部地区土壤肥力保育的有效措施和耕作模式。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号