首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
OBJECTIVE: To evaluate the mechanical properties of canine arytenoid cartilage-suture constructs. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Eighty canine cadaveric larynges. METHODS: Arytenoid cartilage-suture constructs were loaded to failure on a materials testing machine. The effect of hole size, suture configuration, suture size, and rate of distraction on load at failure, displacement at failure, energy to failure, and construct stiffness were evaluated. Polypropylene sutures were used exclusively. Specific variables evaluated were: (1) hole size-SH needle, 22, 20, and 18 ga hypodermic needles; (2) suture configurations-single dorsal and ventral articular sutures, double sutures, horizontal mattress, locking loop, and single non-articular sutures; (3) suture size-1, 0, 2-0, and 3-0; and (4) distraction rate-0.83 and 36.66 mm/s. RESULTS: Hole size had no effect on any biomechanical variable. Double suture and horizontal mattress configurations had the highest median load and energy at failure. Single dorsal suture configurations that did not include the arcuate crest had the lowest median load at failure. Larger suture sizes tended to result in stiffer constructs. Cartilage-suture constructs behaved in a viscoelastic manner where load at failure, energy at failure, and stiffness increased when distraction rate was increased, whereas displacement at failure did not. Most constructs failed by suture pullout regardless of distraction rate, although 50% of horizontal mattress configurations failed by avulsion of the muscular process. CONCLUSION: Suture and hole sizes appear to have few effects on the biomechanical performance of arytenoid-suture constructs. Double-suture and horizontal mattress suture patterns had the best overall mechanical properties for arytenoid lateralization. Single-suture techniques, which do not incorporate the arcuate crest, were biomechanically inferior. CLINICAL RELEVANCE: Cumbersome large-diameter sutures offer no advantage over smaller sutures when performing arytenoid lateralization. The cross-sectional geometry of the muscular process should be taken into account when placing sutures in the arytenoid cartilages. Single-suture techniques that do not incorporate the arcuate crest should be avoided.  相似文献   

2.
OBJECTIVES: To compare suture patterns (simple interrupted, modified pulley, horizontal mattress, double butterfly) by use of a novel in vitro model that quantifies force required for closure against tension. STUDY DESIGN: In vitro study. SAMPLE POPULATION: Suture constructs. METHODS: An in vitro suturing frame was constructed with extension springs to provide a standard resistance against movement of 2 panels of loops toward each other. Four different suture patterns were applied to the frame in randomized trials. The frame was affixed to a tensiometer that measured the force required for each suture pattern to close a fixed distance (3.81 cm) at a constant rate (5.08 cm/min) against the tension (0.6 kg/cm) of the extension springs. The closure distance and tension were selected subjectively to mimic tension encountered clinically during wound reconstruction oncologic surgical procedures. RESULTS: The modified pulley suture required the least force to close, followed by the double butterfly, simple interrupted, and horizontal mattress patterns. CONCLUSIONS: The modified pulley suture and double butterfly suture patterns require less force to close a given distance under tension than either simple interrupted or horizontal mattress suture patterns. CLINICAL RELEVANCE: Application of tension relieving suture techniques for fascia, subcutaneous, and buried-knot subdermal suturing should be considered to facilitate direct closure of wounds under tension. Modified pulley and double butterfly suture patterns offer some mechanical advantage by requiring less force to achieve closure compared with other suture patterns that might be used in reconstructive surgery.  相似文献   

3.
OBJECTIVE: To describe and compare a simple continuous suture pattern with a simple interrupted pattern for enterotomy closure or end-to-end intestinal anastomosis. DESIGN: Retrospective study. ANIMALS: 58 dogs and 25 cats that underwent enterotomy or intestinal resection and anastomosis. PROCEDURE: Signalment, surgical procedure, suture pattern, suture material, confirmation of dehiscence, and follow-up were reviewed. Groups were compared by procedure (anastomosis or enterotomy) and by suture pattern. RESULTS: 57 animals underwent continuous closure; 26 had interrupted closure. Only polydioxanone or polypropylene suture materials were used. Overall, 81 (98%) animals had no signs of intestinal dehiscence and survived > 2 weeks. Two animals had confirmed dehiscence after foreign body removal, 1 of 57 (2%) after continuous closure, and 1 of 26 (4%) after interrupted closure. CLINICAL IMPLICATIONS: The simple continuous closure pattern is an acceptable alternative to simple interrupted closure for small intestinal anastomosis or enterotomy closure.  相似文献   

4.
The load-to-gap formation, maximum load, gap present at maximum load, and failure mode were compared among four suture patterns: Bunnell-Mayer, modified Kessler, Mason-Allen, and simple interrupted. Sixty-four goat tendons were sutured with 2-0 monofilament polypropylene in one of the patterns and distracted at 92 cm/min with an electrohydraulic materials testing system. All tests were filmed at 40 frames/sec with an intermittent pin registered camera. The load-to-gap formation was not significantly different among the Bunnell (13.3 +/- 1.5 newtons [N]), Kessler (12.8 +/- 1.3 N), and simple interrupted (11.7 +/- 1.7 N) patterns. The Mason-Allen pattern was significantly different )8.2 +/- 0.5 N). The Bunnell-Mayer had the highest mean maximum load to failure (43.0 +/- 1.6 N) followed by the modified Kessler (34.1 +/- 1.9 N). There was no difference between the Mason-Allen (22.9 +/- 1.4 N) and simple interrupted (21.2 +/- 1.4 N). All of the patterns permitted at least a 1 cm gap to form when the maximum load was applied. The Bunnell pattern caused severe constriction of the tendon and failed by suture material disruption. The modified Kessler caused some focal constriction, but the suture material pulled out before breaking and sliced the tendon in the process. The Mason-Allen and the simple interrupted patterns sliced the tendon as the suture pulled out of the tendon.  相似文献   

5.
OBJECTIVE: To describe a modified 3-loop pulley suture pattern for the reattachment of canine tendons to bone along with a biomechanical comparison with the locking-loop suture. STUDY DESIGN: In vitro biomechanical study and clinical case report. ANIMALS OR SAMPLE POPULATION: Biomechanical study: 10 paired gastrocnemius tendons and calcaneii harvested from 5 canine cadavers. Case report: a Doberman with avulsion of the gastrocnemius tendon of insertion. METHODS: Biomechanical study: paired tendons were reattached to the calcaneus with either a modified 3-loop pulley pattern or a locking-loop pattern. Tensile loading to failure was performed. A direct, non-contact, method of gap measurement, using digital video, was used to measure gap formation. Load required to initiate gap formation (defined as load at a 1 mm gap) and to produce a 3 mm gap was evaluated in addition to maximum load and gap at failure. RESULTS: Mean (+/-SEM) 1 mm gap loads were 31.0+/-4.2 and 17.2+/-2.5 N, mean 3 mm gap loads were 49.1+/-2.4 and 28.9+/-3.2 N, and mean maximum loads were 72.9+/-4.3 and 55.8+/-2.2 N for the modified 3-loop pulley suture and the locking-loop suture, respectively. These differences were statistically significant (P<.05). The gap at failure was similar for both repairs. The clinical case remained sound 7 months postoperatively. CONCLUSIONS: A modified 3-loop pulley pattern is biomechanically superior to a locking-loop pattern for reattachment of the canine gastrocnemius tendon to bone and may be suitable for clinical use. CLINICAL RELEVANCE: Tendon repairs with a gap >3 mm are reported to be at increased risk of rupture during the first 6 weeks postoperatively. A modified 3-loop pulley pattern resists gap formation better than a locking-loop pattern.  相似文献   

6.
Two suture techniques for tracheal anastomosis after large-segment tracheal resection were compared. Eight cartilages were resected from the trachea of each of 12 dogs; anastomoses with 4-0 polydioxanone suture were created using a simple continuous suture technique in six dogs and a simple interrupted suture technique in six dogs. Surgical time was shorter but apposition of tracheal segments at the time of surgery was less precise with the simple continuous suture technique. The dogs were evaluated for 150 days after surgery. Clinical abnormalities after tracheal resection and anastomosis were not observed. Percent dorsoventral luminal stenosis was calculated by measuring the tracheal lumen diameter on lateral cervical radiographs. Percent luminal stenosis was calculated planimetrically using a computerized digitizing tablet. Anastomotic stenosis was mild in all dogs; however, the mean percent luminal stenosis determined planimetrically was significantly greater for dogs that had the simple continuous suture technique. Planimetric measurements of cross-sectional area made before and after formalin fixation were not significantly different. Radiographic determination of percent dorsoventral luminal stenosis was a poor predictor of diminution of cross-sectional area determined planimetrically.  相似文献   

7.
OBJECTIVE: To compare ease of insertion, load to failure, and mode of failure of cortical and cancellous screws, BoneBiter, IMEX, and TwinFix suture anchors in canine metaphyseal tibial bone. STUDY DESIGN: Experimental biomechanical study. ANIMALS: Canine cadaveric tibias. METHODS: One investigator inserted all anchors and subjectively evaluated ease of placement. Anchor systems were loaded to failure along axis of insertion with audio-video recording to determine failure mode. RESULTS: BoneBiter was the most difficult anchor to insert successfully. Mean+/-SD loads to failure were cancellous screw (711+/-193 N), IMEX 4.7 mm 18 g wire (661+/-163 N), IMEX 4.0 mm 18 g wire (661+/-165 N), cortical screw (635+/-184 N), BoneBiter #5 Kevlar suture (393+/- 109 N), and TwinFix 5.0 mm #2 polyester (267+/-73 N). No significant differences were noted among the cortical screw, cancellous screw, IMEX 4.7 and 4.0 mm, all of which were significantly (P<.001) greater than BoneBiter and TwinFix . Failure modes were pullout of bone, suture-wire breakage, eyelet breakage, or no failure to 1000 N: screws (18,0,0,2), IMEX (18,1,1,0), BoneBiter (2,8,0,0), and TwinFix (0,10,0,0). CONCLUSIONS: Fixation devices were user friendly, with the exception of BoneBiter. Mode of failure is dependent on suture material and anchor design. Cortical and cancellous screws, and IMEX anchors with 18 g wire have significantly greater load to failure compared with BoneBiter and TwinFix suture anchors. CLINICAL RELEVANCE: Based on load to failure, ease of use, design characteristics, and cost, IMEX anchors may have advantages over other comparable soft tissue fixation devices.  相似文献   

8.
Three different suture patterns (simple interrupted, interrupted horizontal mattress, subcuticular) were placed in a full thickness incision (skin and body wall) of 18 goldfish (Carassius auratus). After 14 days all fish were euthanized using benzocaine solution. The tissue reactions were evaluated by gross visual inspection and histopathological examination. The superficial inflammatory reactions were graded on a scale from 0 (no inflammation) to 3 (severe inflammation). The inflammatory response in histological examination was graded on a scale from 0 (no inflammatory response or normal skin tissue) to 5 (severe inflammatory response and necrosis). The interrupted horizontal mattress induced a moderately severe to severe inflammatory response and necrosis (grades 4–5) but the subcuticular suture induced a very mild to mild inflammatory response (grades 0–1). The simple interrupted suture induced a moderate to moderately severe inflammatory response (grades 2–4). In conclusion, results showed that a subcuticular suture is the most appropriate to use in the closure of a full thickness body wall incision.  相似文献   

9.
Two techniques for tracheal resection and anastomosis were performed and compared in 20 normal dogs. In one technique, cartilage rings were split circumferentially, and the split rings were apposed with simple interrupted sutures that penetrated the annular ligament. In the other technique, the annular ligaments were incised and apposed with simple interrupted sutures placed through the annular ligament and around the adjacent ring. Endoscopy and xeroradiography were used to evaluate the anastomotic sites at 1, 2, 4, and 8 weeks postoperatively. Infection, mucus accumulation, coughing, stridor, or anastomotic separations were not seen. Stenosis of the anastomotic site was observed in 80% of the dogs, due to the intraluminal protrusion of epithelialized fibrous connective tissue. The split cartilage technique was easy to perform and resulted in less dorsoventral stenosis than the annular ligament technique.  相似文献   

10.
OBJECTIVE: To compare a 3-loop pulley suture pattern with 2 locking-loop sutures for the repair of components of the canine Achilles mechanism. STUDY DESIGN: In vitro biomechanical study. ANIMALS: Forty-eight paired tendons collected from 9 canine cadavers. METHODS: Paired tendons were repaired with either a 3-loop pulley suture or 2 locking-loop sutures and tensile tested to failure. To ensure accurate anastomosis gap measurement a direct, non-contact, method of gap measurement, using digital video, was devised. Load initiating gap formation (defined as load at a 1 mm gap) and load producing a 3 mm gap were evaluated in addition to maximum load, gap at failure, mode of failure, and time spent placing the sutures. RESULTS: Maximum load values were similar for both repairs. The mean 1 mm gap loads were 44.0 and 18.4 N, and the mean 3 mm gap loads were 56.3 and 34.7 N, for the 3-loop pulley pattern and the 2 locking-loops, respectively; these differences were statistically significant. The 3-loop pulley pattern was faster to place and resulted in a smaller gap at failure. All but 2 repairs failed by suture pull out. CONCLUSIONS: The 3-loop pulley pattern is more resistant to gap formation during tensile loading, and is quicker to place, than 2 locking-loop sutures. CLINICAL RELEVANCE: Gap formation can significantly delay tendon healing. Tendon repairs with a gap >3 mm are reported to be at increased risk of rupture during the first 6 weeks postoperatively.  相似文献   

11.
Esophagotomies were performed on 36 dogs and closed with 3-0 polydioxanone in double-layer simple interrupted, single-layer simple interrupted, or single-layer simple continuous patterns. The operative time was shortest for single-layer simple continuous closure, followed by single-layer simple interrupted and double-layer simple interrupted, respectively. Three dogs with each suture pattern were euthanatized at hours 0 and 1, and days 4 and 28 after surgery. The esophagotomy incisions were subjected to bursting strength testing and examined microscopically. The bursting wall tension was higher for all three suture pattern groups at 28 days than at 0 and 1 hour. The double-layer closure had higher bursting wall tension than the single-layer closures at 0 hour and 4 days. Single-layer simple continuous closure had the lowest bursting wall tension for each time period. Single-layer simple interrupted closure had the highest bursting wall tension at 28 days. Microscopic examination revealed close approximation of tissue planes for the double-layer closure and mucosal ever-sion for the simple interrupted and simple continuous single-layer closures. Healing was superior histologically with the double-layer closure.  相似文献   

12.
Dorsal cystotomies were performed in 60 healthy dogs. Twenty bladders were closed with a single-layer interrupted appositional suture pattern, 20 with a two-layer interrupted appositional suture pattern, and 20 with a two-layer continuous inverting suture pattern. Four dogs from each group were euthanatized at hours 0, 3, 12, 18, and 24. Mechanical strength of the cystotomy closures was evaluated by calculating the circular bursting wall tension. The single-layer interrupted appositional suture pattern was as strong as both two-layer suture patterns at hours 3, 12, 18, and 24. The two-layer interrupted appositional suture pattern was as strong as the two-layer continuous inverting suture pattern during the first 24 hours.  相似文献   

13.
OBJECTIVE: To determine the bursting strength of ventral median abdominal incisions closed by either simple continuous or inverted cruciate suture patterns. STUDY DESIGN: Experimental. ANIMAL OR SAMPLE POPULATION: Twelve equine cadavers. METHODS: A 25 cm ventral median incision was made through the linea alba and a 200 L polyurethane bladder was placed within the abdomen. Either a simple continuous or an inverted cruciate pattern using 3 polyglactin 910 with a bite size and suture interval of 1.5 cm was used to close linea incisions. Closure time was recorded for each pattern. The bladder was inflated with air at 40 L/min, and the pressure at body wall failure recorded. The length of suture used for wound closure and the wound failure modes were recorded. Deviation from the linea (cm), total suture length (cm), suture length to wound length ratio (SL:WL), closure time (min), bursting pressure (mm Hg), and failure modes were compared between groups using Welch-Aspin t-tests. The effects of independent subject variables were assessed for possible effects on bursting strength using analysis of covariance. RESULTS: Mean bursting pressure was significantly greater for the simple continuous pattern than for the inverted cruciate pattern (P = .01). Significantly less suture material (P = .0002) was required with the continuous pattern than with the inverted cruciate pattern. Mean closure time, SL:WL, deviation from the linea, and failure modes were not significantly different between groups. No significant effects were noted for independent variables in both groups on bursting strength. CONCLUSIONS: In this model, a simple continuous closure pattern for ventral median abdominal incisions was stronger than an inverted cruciate pattern. A simple continuous pattern leaves less foreign material in the wound, which may be of benefit in reducing incisional complications. CLINICAL RELEVANCE: Use of a continuous closure pattern for the linea alba may offer greater wound security during episodes of increased intra-abdominal pressure in horses.  相似文献   

14.
This study compares the healing of oronasal defects created by partial maxillectomy when closed using two different suture materials and two different suture patterns. In experiment 1, 24 dogs were divided into four equal groups. Partial maxillectomy was performed on each dog and was closed using either a two-layer simple interrupted suture pattern (12 dogs) or a modified Mayo mattress pattern (12 dogs) with either polyglactin 910 (12 dogs) or polypropylene (12 dogs) sutures. On the seventh postoperative day, the dogs were euthanized, suture line bursting pressures were measured, and wound healing was evaluated grossly and histopathologically. Suture line dehiscence occurred in one dog from each of the four groups. These were the only dogs in which electrocoagulation had been used. The healing of suture lines closed with the two-layer simple interrupted pattern was superior to that of those closed with the modified Mayo mattress pattern based on the degree of gross oral ulceration, suppurative inflammation, fibrosis and oral epithelial covering at the suture line, and the number of necrotic sites in the adjacent tissue. The healing of suture lines closed with polypropylene was superior to that of those closed with polyglactin 910 based on suture line bursting pressures and the degree of suppurative inflammation and tissue necrosis at the suture sites. In Experiment 2, partial maxillectomies were performed on four dogs, and closure was achieved using a two-layer simple interrupted suture pattern with either polyglactin 910 (two dogs) or polypropylene (two dogs). On the 30th postoperative day, the dogs were euthanized, and wound healing was evaluated grossly and histopathologically. All suture lines were well healed. All polyglactin 910 oral sutures were absent, while all polypropylene oral sutures were still present.  相似文献   

15.
An 18-gauge stainless steel wire was applied to a transverse fracture model to determine the antirotational effectiveness of cruciate, horizontal mattress, and simple interrupted interfragmentary wire configurations. The number of twists used to tighten the configuration and the distance from the fracture were compared in the cruciate and horizontal mattress patterns. In a 2nd experiment, the compressive forces generated at the fracture by cruciate and horizontal mattress configurations tightened with 1 and 2 twists were determined. The cruciate configuration was better than the horizontal mattress and simple interrupted configurations in preventing rotation (P less than 0.001). Increasing the distance from the fracture line to the wire holes decreased antirotational effectiveness. Tightening the cruciate and horizontal mattress configurations with 2 twists produced significantly greater compressions across the fracture line than did tightening with 1 twist (P less than 0.0001).  相似文献   

16.
Colonic anastomosis was conducted in 12 calves divided equally into four groups. Four suture patterns, viz. single inversion (continuous Connell), double inversion (two rows of continuous Cushing), single eversion (continuous everted mattress), double eversion (single eversion reinforced with simple continuous) were used. In each animal, anastomosis of the same technique was performed at four places. Each technique was evaluated in terms of clinical and gross observations, lumen stenosis and bursting pressure. Observations were made on the 7th, 14th and 28th day after anastomosis. None of the anastomotic techniques showed any untoward incident during the 28 days of postoperative study. Stricture formation at the site of anastomosis was minimal with the single inversion technique whereas it was maximum with the single eversion technique. Pressure for disruption of intestinal segments was higher after inversion than eversion techniques. It was concluded that the one-layer inversion anastomosis technique proved to be the best among the four techniques because (i) of its reduced incidence of adhesions; (ii) it maintains adequate lumen diameter; (iii) it withstands maximum pressure. The double layer inversion technique was conceded to be the second best choice for colonic anastomosis followed by the double eversion and single eversion techniques.  相似文献   

17.
OBJECTIVE: To characterize the mechanical performance of a veterinary bone anchor under static and cyclic loads. STUDY DESIGN: Mechanical testing study. ANIMALS: Cadaveric canine humeri. METHODS: Humeri (6 pairs) were collected from skeletally mature dogs (mean [+/-SD] age, 17.2+/-2.1 months; weight, 20.8+/-1.5 kg). Bone anchors were inserted in the proximal metaphysis using nylon, and were longitudinally extracted. For the opposite humerus, anchors were subjected to longitudinal cyclic load (50% of the load at failure of their pair) for 1200 cycles then longitudinally loaded to failure. Anchors were then installed in a similar and adjacent area of these 2(nd) humeri with nylon and cyclically tested perpendicular to the axis of anchor insertion (100% of the longitudinal holding power of their pair) for 1200 cycles, then perpendicularly loaded to failure. Paired t-tests were used to compare holding power before and after longitudinal cyclic testing. RESULTS: Longitudinal holding power of the screw-type anchor in the proximal humerus was 385+/-30 N. Anchor pullout was the only mode of failure. Anchors in the paired humeri did not fail after 1200 cycles of 50% longitudinal loading, and post-cycle holding strength was not different (335+/-87 N; P=.32). Perpendicularly loaded anchors did not fail after 1200 cycles of 100% of opposite longitudinal holding strength, and had post-cycle perpendicular holding strengths of 514+/-72 N. Suture breakage was the mode of failure. CLINICAL RELEVANCE: Bone anchor holding strength is dependent on orientation of suture load. Screw-type bone anchor holding strength was not affected by longitudinal cyclic loading, and holding strengths of approximately 385 N can be expected in metaphyseal bone of large-breed mature dogs. Perpendicularly loaded anchors have higher failure loads, and holding strength of approximately 514 N can be expected in metaphyseal bone of the proximal humerus.  相似文献   

18.
OBJECTIVE: To compare 3 techniques for ureteroneocystostomy in cats. STUDY DESIGN: Experimental surgical study. ANIMALS: Fifteen adult cats. METHODS: Cats (15) had ureteroneocystostomy with ureteronephrectomy of the contralateral kidney: 5 cats had an intravesical mucosal apposition technique (modified Leadbetter-Politano; intravesical-MA group), 5 cats had extravesical ureteroneocystostomy (modified Lich Gregoir) using a simple continuous suture pattern (extravesical-SC group) and 5 cats had an extravesical technique using a simple interrupted suture pattern (extravesical-SI group). Renal function was evaluated by measuring serum creatinine concentration. Ultrasonographic assessment of the kidney and ureteroneocystostomy site was performed the day after surgery, twice weekly for 3 weeks and once weekly for the remainder of the study. Cats were euthanatized 50 days after surgery. The kidney and ureter removed at surgery, the remaining kidney, ureter, ureteroneocystostomy site, and bladder were examined histologically. RESULTS: Two extravesical-SC cats were euthanatized because of azotemia and uroabdomen, and 1 died acutely at day 4 for unknown reasons. In the intravesical-MA and extravesical-SI cats, the serum creatinine concentration increased after surgery, peaking at a mean (+/-SD) of 9.4+/-2.4 mg/dL and 4.9+/-3.3 mg/dL on day 3, and decreasing to 3.4+/-5.7 mg/dL and 1.5+/-0.4 mg/dL on day 7, respectively. The extravesical-SI technique was associated with consistently lower serum creatinine concentrations for the first week after surgery compared with the other techniques. The mean serum creatinine concentration was within the reference range in cats in the intravesical-MA and extravesical-SI groups by days 10 and 5, respectively. Renal pelvic dilatation occurred in all cats but resolved more rapidly in cats after extravesical techniques. There was no significant difference in serum creatinine concentrations or renal pelvic dilation between the intravesical-MA and extravesical-SI techniques. Bladder mass height at the anastomosis site was significantly larger and persisted for longer with intravesical-MA technique. CONCLUSION: An extravesical-SI technique is seemingly the choice for ureteroneocystostomy in cats with undilated ureters. Renal pelvic dilation on ultrasound examination should be expected after ureteroneocystostomy in cats. CLINICAL RELEVANCE: An extravesical ureteroneocystostomy technique using a simple interrupted pattern for anastomosis should be considered in cats undergoing renal transplantation.  相似文献   

19.
OBJECTIVE: To compare bursting strength and failure modes of ventral median abdominal incisions closed with loop suture in a simple continuous pattern using two different suture-bite intervals. STUDY DESIGN: In vitro experiment. SAMPLE POPULATION: Equine cadavers (n=14; weighing >318 kg; postmortem interval <2 hours). METHODS: A template was used to make a 25 cm incision with suture interval and bite size of either 1.0 cm x 1.5 cm or 1.5 cm x 1.5 cm. A 200 L polyurethane bladder was inserted within the abdomen and insufflated to create abdominal wall tension. Celiotomies were closed with a #2 braided lactomer 9-1 continuous pattern with a loop suture. Deviation from the linea, closure time (minutes), total suture length (cm), suture length to wound ratio (SL:WL), bursting pressure (mm Hg), and failure modes (fascial or suture) were compared between groups using a Mann-Whitney U test. Significance was set at P<.05. RESULTS: No significant differences were identified between closing time, total suture length used, SL:WL, bursting pressure, or failure mode. Fascial failure was the main failure mode for both techniques; suture failure occurred rarely and knot failure did not occur. CONCLUSION: Based on the overall bursting pressure and failure mode, #2 braided lactomer loop suture placed in a continuous pattern should provide sufficient security for closure of the equine linea alba during recovery and the immediate postoperative period. CLINICAL RELEVANCE: Although there were no significant differences in the 2 patterns evaluated, the 1.5 cm x 1.5 cm pattern may have potential advantages for closure time, less total suture remaining in the wound, and strength.  相似文献   

20.
The purpose of this study was to compare postoperative wound healing in canine ovariohysterectomy following the use of an absorbable monofilament poliglecaprone 25 suture in 2 different skin closure techniques, the buried continuous subcuticular (BCS) suture pattern and the simple interrupted (SI) suture pattern. These 2 skin closure techniques were evaluated against a nonabsorbable polypropylene monofilament suture in an SI pattern. Wounds were assessed by using a semiquantitative scoring system at 18 to 24 hours and 10 to 14 days, postoperatively. Results indicated that the BCS closure using poliglecaprone 25 demonstrated a higher rate of tissue reactivity initially (18-24 hours postoperatively), as compared with the SI closure using either suture material. By 10 to 14 days postoperatively, poliglecaprone 25 used in a BCS closure was associated with significantly lower wound scores than was the same material used in an SI closure. It was concluded that the BCS closure may effect a better cosmetic appearance to the skin closure in a canine ovariohysterectomy at the time of the recheck appointment. Furthermore, by obviating the need for suture removal, use of the BCS pattern may eliminate the requirement for this return appointment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号