首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
我国南方食用菌原料林培育研究进展   总被引：10，自引：2，他引：10       下载免费PDF全文
香菇等食用菌在我国具有近千年的栽培历史，是山区经济发展的重要产业，食用菌原料林的培育对于以阔叶权赤原食用菌产业持续发展意义重大。本文重点对食用菌原料林树种的优选、人促更新定向培育、主要原料林树种的丰产栽培以及其采种基地建设等进行述评。根据食用菌原料林培育研究现状和存在问题，提出进一步发展的技术对策和今后的研究重点，包括主要原料树树的种的良种选育和扩繁技术、育苗技术、松杉林冠下造林技术和多种食用菌原料林树种混植技术、二代食用菌原料林的萌芽更新技术等。  相似文献   

2.
Mycelial growth and fruit body formation ofPleurotus abalonus andP. eryngii cultured on various sawdust-based substrates from different wood species were investigated. Growth onCryptomeria japonica substrate resulted in good mycelial growth and a high yield of fruit bodies.Larix kaempferi substrate was unsuitable for the cultivation of these mushrooms. The fruit body formation rate correlated with mycelial growth from all the wood species tested. Although differences were found for mycelial growth and fruit body formation on various wood species, there were no wood species that were completely unsuitable exceptL. kaempferi. These results show that a wide range of wood species can be used for the cultivation ofP. abalonus andP. eryngii.  相似文献   

3.
Phenylboronic acid (PBA) was tested in terms of boron leachability from treated wood. In addition, the fungal and termiticidal efficacy of PBA-impregnated sugi (Cryptomeria japonica D. Don) wood was tested against the decay fungi Coriolus versicolor (L. ex Fr.) Quel. and Tyromyces palustris (Berk. et Curt) Murr., representing white-rot and brown-rot fungi, respectively, and the Formosan subterranean termite Coptotermes formosanus Shiraki. Ion chromatography analysis of hot water extracts of treated wood before and after leaching indicated that PBA is considerably resistant to water leaching, and saturation of the treatment solution increased the fixation ratio of boron in wood, whereas boric acid could not remain in wood impregnated even with the saturated solution. Decay test results revealed the excellent bioactive performance of PBA. Wood treated with 0.34% PBA solution was found resistant to both decay fungi, even after running-water leaching for 10 days and treatment with 1.00% PBA completely inactivated the Formosan subterranean termite for the leached specimens. Weight gain levels were 0.18% w/w (0.46kg/m3) and 0.99% w/w (2.49kg/m3) for these concentration levels, respectively, after being leached by running water. Contrary to the general belief that boron is a slow-acting toxicant against termites and unable to prevent mass loss of treated wood, PBA acted rapidly, and the mass loss caused by termites was low.This study was presented in part at the 47th annual meeting of the Japan Wood Research Society, Kochi, April, 1997  相似文献   

4.
The effects of seasoning treatment for fresh sugi wood meal on the mycelial growth of shiitake was investi-gated. The mycelial growth of shiitake in sugi wood meal increased to the same level as that in extract-free sugi wood meal on the 12th day and to approximately 70% of that in konara wood meal on the 28th day of the seasoning treatment. A drastic decrease in extracts of fresh sugi wood meal occurred during the early stage of treatment, and the neutral fraction of methanol extracts decreased to less than 2%. The drainage of sugi wood meal media significantly increased during the later stage of treatment. No changes in the chemical components of sugi wood meal were detected during the seasoning treatment. The mycelial growth of shiitake in the fully seasoned sugi wood meal, which was prepared for commercial mushroom cultivation, was at almost the same level as that in the extract-free sugi wood meal. All of the seasoned sugi wood meals contained a neutral fraction of less than 1%. These results suggested that seasoning treatment can promote mycelial growth of shiitake in sugi wood meal by eliminating inhibitors and improving the physical properties of sugi wood.Part of this paper was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999  相似文献   

5.
The object of this study was to determine the cause of differences in the improvement in liquid penetration of precompressed wood species. The maximum amount of water uptake by the capillary rise method and changes in the aspirated pits seen with scanning electron microscopy before and after of preextraction and precompression were investigated using heartwood samples of four softwoods. The height of penetration and the weight by the capillary rise method for preextractive wood powders are discussed. Three wood species andLarix leptolepis showed marked increases in the amount of solution uptake after precompressed treatment only.Larix leptolepis wood required compression after extraction by boiling in water. These differences among wood species were caused by the accumulation of extractive material. It was also recognized that the accumulative material inLarix wood has plasticity and that inPseudotsuga is brittle. Based on these results it was found that it is difficult to destroy aspirated pits in the former and easy in the latter. On the other hand, the difference in penetration of each wood species was caused by the quantity and quality of the extraction material in addition to the extent of the wettability of the surface of the cell cavity as well as aspirated pit.Part of this report was presented at the 46th annual meeting of the Japan Wood Research Society, Kumamoto, April 1996  相似文献   

6.
Residual wood meal after extraction of milled wood lignin (WMEM) ofEucalyptus globulus was extracted with alkali and LiCl/N,N-Dimethylacetamide (DMAc). These agents dissolve mainly hemicellulose and cellulose, respectively. The extractability of WMEM in alkali solutions was influenced by the degree of swelling of the cellulose. Under good swelling conditions, considerable amounts of cellulose and lignin were extracted with the hemicellulose. Maximum extractability was about 60% of the WMEM under optimum conditions (3 M or 5 M LiOH or 3M NaOH solution). Some portion of cellulose was extracted with LiCl/DMAc at room temperature. Thus, lignin inE. globulus WMEM was divided into three fractions: hemicellulose-lignin fraction, cellulose-lignin fraction, and insoluble-lignin fraction.Part of this work was presented at the 49th annual meeting of the Japan Wood Research Society, Tokyo, April 1999; and at the 50th annual meeting of the Japan Wood Research Society, Kyoto, April 2000  相似文献   

7.
As an essential preliminary evaluation for understanding the hydration behavior of wood-cement-water mixtures, an isothermal calorimetry and experimental method were used to measure the hydration heat of woodcement-water mixtures. The compatibility of 38 wood species with ordinary portland cement was studied using this procedure. Based on the results, all the wood species tested were classified into two groups. The 24 species included in the first group showed a moderating influence on the hydration reaction of cement, and a maximum temperature (T max) peak during the exothermic reaction while the cement set appeared within 24h for each species. The other 14 species inhibited cement hydration completely. According to the maximum hydration temperature (T max) and the time (T max) required to reach the maximum temperature of the mixture, the suitability of each species in the first group was estimated when used as a raw material during production of cement-bonded particleboard. By testing mechanical properties [modulus of rupture (MOR) and internal bonding strength (IB)] during the board-making experiment using the same composition of wood-cement-water, a positive correlation was found betweenT max andt max and MOR and IB. The results imply that the method can be used as a predictor of the general inhibitory properties and feasibility of using wood species as raw materials prior to manufacture of cement-bonded particleboard.Part of this report was presented at the 49th annual meeting of the Japan Wood Research Society, Tokyo, April 1999  相似文献   

8.
Seven species of bacteria were isolated and identified from ponded sugi (Cryptomeria japonica D. Don) logs, and six species showed potent wood-degrading activities. To evaluate the effects of these isolated bacteria on the drying and anatomical characteristics of wood, small fresh blocks of sugi were immersed in water suspensions containing bacteria for 1–7 months. The permeability and drying properties were evidently improved. Most of the encrusting substances adhering to the cell lumens and the pit chambers were removed, and the pit membranes were destroyed. These anatomical changes due to bacterial activity were assumed to improve the permeability of sugi wood.Part of this report was presented at the 40th annual meeting of the Japan Wood Research Society, Tsukuba, April 1990; the 41st annual meeting of the Japan Wood Research Society, Matsue, April 1991; and the IUFRO XX World Congress, Tampere, August 1995  相似文献   

9.
Simulated organic waste was biodegraded in a laboratory-scale machine using matrices prepared from four wood species to investigate the effects of wood species on the degradation rate and the bacterial community. The degradation rate, estimated by measuring weight loss and CO2 evolution, was found to be equal among the four wood species. Changes in viable cell counts and microbial communities over time were examined. Viable cell counts were also similar among the wood species, but initial bacterial communities differed owing to differences in wood species, although these communities became similar with time. The sensitivity of isolates to wood extractives was examined using paper discs. The extractive-insensitive bacteria species were dominant at the initial stage of biodegradation. However, occupancy of sensitive bacteria increased with time. It was thought that antibacterial extractives were degraded or inactivated after some time.Part of this report was presented at the 50th annual meeting of the Japan Wood Research Society, Kyoto. Japan, April 2000  相似文献   

10.
This study was designed to investigate the effects of moisture content (MC) and specific gravity (SG) on the bending strength and hardness of six wood species including Japanese cedar (Cryptomeria japonica D. Don), China fir (Cunninghamia lanceolata), western hemlock (Tsuga heterophylla), red meranti (Shorea spp.), Selangan batu (Shorea spp.), and red oak (Quercus spp.). The experimental results are summarized as follows: Effects of MC and SG on the strength (MOR), stiffness (MOE), and hardness (H B) could be represented by a multiregression formulas. A negative correlation existed between these properties and MC, whereas a postive correlation showed between them and the SG. The changing rate of these properties induced by 1% MC changes varied with the wood species: 2.6% change in MOR was observed in Japanese cedar, China fir, western hemlock, red meranti, and Selangan batu; and 3.9% was found in red oak. For MOE, a 0.58% change was observed in Japanese cedar, China fir, and red meranti; western hemlock and Selangan batu exhibited 1.2% and red oak 2.5%. For hardness, a 1.1% change was observed in Japanese cedar, western hemlock, and red oak; red meranti and China fir exhibited 3.3%; and Selangan batu 1.8%.A part of this report was presented at the 48th annual meeting of the Japan Wood Research Society in Shizuoka, Japan, April 3-5, 1998  相似文献   

11.
Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004  相似文献   

12.
Summary Various chemicals are used for protecting wood samples against fungi, and some of them are released in water, leading to pollution of the water. The kinetics of pentachlorophenol release in water has here been studied by considering the diffusion through the wood along the three principal axes of diffusion. The experiments and the modelling of the process is successfully coupled. The numerical model takes into account the three principal diffusivities, the partition factor, the volumes of wood and water. The effect of wood sample length along the longitudinal axis of diffusion is studied especially, as longitudinal diffusivity is much higher than the other two principal diffusivities. The effects of the relative volumes of wood and water are also of considerable interest not only for the concentration of the chemical in water but also for the rate of release.Symbols C concentration of liquid (g/cm3)_ - C c ,C eq concentration of liquid on the surface, at equilibrium with the surrounding, respectively - C i,j,k concentration of liquid in the wood at positioni, j, k - D diffusivity (cm2/s) - h coefficient of mass transfer on the surface (cm/s) - K partition factor - i, j, k integers characterizing the position in the wood - M L ,M R ,M T dimensionless numbers - M t ,M amount of chemical released after time t, after infinite time, respectively - t increment of time - L, R, T thickness of the slices taken in the wood for calculation - N L ,N R ,N T number of slices taken in the wood - x, y, z coordinates - V water volume of the surrounding water  相似文献   

13.
The sap flow method of wood impregnation was conducted to aid the movement of bacteria through the living tree, thereby accelerating their distribution through wood within a short time. When log-pond water containing mixed species of bacteria were introduced in the living trees by butt-end dipping and then laid horizontally for 6 months, bacteria could be delivered by sap flow vertically through the sapwood tracheids up to the high portions from the butt-end of trees; they could be detected in the ray parenchymal cells. The sap-flow method was assumed to deliver the bacteria to sapwood and heartwood at high levels of standing sugi (Cryptomeria japonica D. Don) trees. Degradation of the pit membranes was observed even at more than 3 m upward from the butt-end after the treatment in sapwood, as well as around the butt-end of the trees. The uptake of the aqueous dye solutions in sapwood of the treated logs were about eight times more than those of control specimens after 8h.Part of this report was presented at the 40th annual meeting of the Japan Wood Research Society, Tsukuba, April 1990; the 41st annual meeting of Japan Wood Research Society, Matsue, April 1991; and the IUFRO 4th international conference on wood drying, Rotorua, New Zealand, August 1994  相似文献   

14.
我国林下食用菌栽培管理技术研究   总被引：1，自引：0，他引：1  
本文介绍了我国林下食用菌栽培管理技术研究现状,归纳了目前林下栽培食用菌种类、栽培基质、栽培林地、栽培模式、温湿度调控和病虫害防治等方面的管理技术,以期为林下食用菌栽培提供理论参考和技术支持。  相似文献   

15.
Changes in moisture content of sugi (Cryptomeria japonica D. Don) wood during high-temperature saturated and superheated steam treatments were investigated. A system for in situ weighing of specimens was used, and the reduction of wood substance by heating was taken into consideration. At 160°C the loss of wood substance due to heating was significant and influenced the moisture content values, but it was almost negligible at 120°C. Treatment time and temperature affected the moisture content in saturated steam but not in superheated steam. Excess water in a saturated closed system appears to promote the decomposition of wood and condensation in or on specimens.Parts of this work was presented at the 49th, 50th, and 52nd Annual Meetings of the Japan Wood Research Society in Tokyo, April 1999; Kyoto, April 2000; and Gifu, April 2002  相似文献   

16.
Spruce wood blocks were acetylated in the presence of potassium acetate (KAc) at 20, 40, 60, 80 and 120°C. At 20°C, the weight percent gain (WPG) due to the KAc-catalyzed acetylation reached 20% in 18 days, whereas that due to pyridine-catalyzed acetylation did not exceed 8%. The hygroscopicity and dimensional stability of the KAc-acetylated wood were the same as those of conventionally acetylated wood at the same WPG, irrespective of reaction temperature. These facts suggest that the KAc enables simplified acetylation of wood at room temperature. The activation energy (E a) of the KAc-acetylation in the lower temperature range (20–40°C, 121–131 kJ/mol) was comparable to that of the acetylation of wood meal (140–146 kJ/mol). It was speculated that diffusion became a minor factor at reduced reaction rates in the lower temperature range, thus requiring a greater E a.  相似文献   

17.
Participation of lignin in the reaction between vapor-phase formaldehyde and wood was examined by using gradually delignified wood meal. A fi rst-order rate equation was successfully applied to the weight gain data. From the estimated reaction parameters such as rate constant, k, and ultimate weight gain, a, the reactivity toward formaldehyde was discussed among wood components, and compared with that for acetylation. k decreased monotonously with progress of the elimination of lignin, suggesting that the reaction rate of lignin is dominant over that of whole wood, and the decrease in the ratio of lignin retarded the reaction of wood as a whole. On the other hand, a increased with decreasing lignin content. This may be attributable to the enhanced reactivity of the remaining lignin due to some structural changes and to the increase in the number of reactive sites in polysaccharides as a result of their exposure accompanying the elimination of lignin. The dependencies of k and a on the lignin content were not similar to the case for acetylation, probably because of the difference in the reaction phase. In vapor-phase formaldehyde treatment, the remaining lignin reacts as it is, whereas in liquid-phase acetylation it would undergo rearrangement or swelling of the structure in the reaction solution.  相似文献   

18.
To understand wood colonization by sapstain fungi and their potential biocontrol agents, it is necessary to differentiate these organisms directly on their natural substrates. In the present study the feasibility of transforming with the green fluorescent protein (GFP), the sapstain fungus Ophiostoma piceae and a potential biocontrol agent Cartapip®, an Ophiostoma piliferum albino strain was assessed. Transformants of the two fungal species were screened by polymerase chain reaction and Southern blot analyses. The GFP was expressed in spores, synnemata and mycelia of the transformants grown in artificial media or wood. The growth, pigmentation and wood colonization of the transformants were similar to that of the non‐transformants, suggesting that the presence of the gfp gene had no negative effect on the biology of the transformants. Using fluorescence and confocal microscopy, the GFP‐expressing fungi were easily differentiated from the wild‐type strains and other fungal species in wood, even 4 months after inoculation. The results show that the use of the GFP system is feasible to monitor Ophiostoma fungi in wood.  相似文献   

19.
Species-specific oligonucleotide primers for detecting wood rot fungi, Gloeophyllum trabeum, Trametes versicolor, Coniophora puteana, and Serpula lacrymans, and the primer detecting a group of related fungi to G. sepiarium were developed. These primer sequences were picked up from the internal transcribed spacer region between small-subunit rDNA and large-subunit rDNA. The species selectivities of the developed primers were checked. Real-time polymerase chain reaction (PCR) was carried out using these highly specific primers to quantitatively detect at least of 0.01 ng genome DNA of the target species. This quantitative PCR was also used to differentiate the target species DNA from mixed species DNA. A PCR-based technique using the species-specific primers would be applicable to multiple-sample assay in diagnosis of wood decay and to investigation of environmental fungal populations. Part of this article was presented at the International Symposium on Wood Science and Technology (IAWPC 2005), Yokohama, November 2005  相似文献   

20.
Influence of heating and drying history on micropores in dry wood   总被引：1，自引：1，他引：0  
To investigate the influence of heating and drying history on the microstructure of dry wood, in addition to the dynamic viscoelastic properties, CO2 adsorption onto dry wood at ice.water temperature (273 K) was measured, and the micropore size distribution was obtained using the Horvath-Kawazoe (HK) method. Micropores smaller than 0.6 nm exist in the microstructures of dry wood, and they decreased with elevating out-gassing temperature and increased again after rewetting and drying. Dry wood subjected to higher temperatures showed larger dynamic elastic modulus (E′) and smaller loss modulus (E″). This is interpreted as the result of the modification at higher temperature of the instability caused by drying. Drying history influenced the number of micropores smaller than 0.6 nm in dry wood not subjected to high temperature, although the difference in the number of micropores resulting from the drying history decreased with increasing out-gassing temperature. A larger number of micropores smaller than 0.6 nm exist in the microstructure of dry wood in more unstable states, corresponding to smaller E′ and larger E″ than in the stable state. Consequently, unstable states are considered to result from the existence of temporary micropores in the microstructures of dry wood, probably in lignin. Part of this report was presented at the 55th Annual Meeting of the Japan Wood Research Society, Kyoto, March 2005, and at the 56th Annual Meeting of the Japan Wood Research Society, Akita, August 2006  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号