共查询到19条相似文献,搜索用时 593 毫秒
1.
据不完全统计,杨树人工林全国共有114.8万ha,为能进一步提高杨树经营管理水平,编制杨树二元立木材积表已成为当务之急。作者利用从1981年起经过5a时间测定与收集16个树种共6383株实测样木资料,编制了12个杨树二元立木材积表,供生产、科研工作应用。 相似文献
2.
3.
闽东柳杉人工林立木材积表和地位指数表的编制 总被引:5,自引:0,他引:5
本文根据258株柳杉样木资料,编制了一元和二元立木材积表,其模型为V=aDb和V=aDbHc,所编制的材积表经过检验证明适用。根据70株优势木的树于解析材料,用Richards方程编制多态形地位指数表。 相似文献
4.
5.
柳树无性系人工林造林发展很快,为准确测定林分收获量,通过对各地苏柳172林分调查量测,共收集样木材积资料742株、样木重量资料130株,选用aD^bH^e模型编制了苏柳172人工林二元立木材积表和二元立木重量表。 相似文献
6.
该文通过530林杨树立木调查资料,分别采用8种模型进行回归拟合,经过误差比较与精度分析,选出V+C1+C2D+C3D2+C4DH+C5D3H+C6H作为杨树二元立木材积方程模型,供编制立木材积表与科研生产中使用。 相似文献
7.
塞罕坝地区华北落叶松人工林二元立木材积表编制研究 总被引:1,自引:0,他引:1
文章以塞罕坝地区华北落叶松林为研究对象,抽取具有代表性的样本120株和检测样本17株,利用二元回归方程编制二元立木材积表。选取5个常用的二元材积模型,应用ForStat2.0软件,利用最小二乘法拟合计算模型参数,并利用F检验和未参与建模的17株样本对其精度和适用性进行检验,确定最适用模型为山本和藏式:V=0.000 084 D~(1.747 818)H~(1.005 244),利用此式编制了塞罕坝地区华北落叶松人工林二元材积表,旨在为林业生产实践提供科学依据,实现塞罕坝森林资源科学经营。 相似文献
8.
通过外业调查,用493株随机样本资料建立了二元立木材积模型,经过4个二元材积式的比较研究,确定最优二元材积模型为V=0.000 057 41D1.770 352 19H1.125 030 45。并用132株独立随机样本进行适用性检验。结果表明,该材积模型适用于辽宁地区,在此基础上编制辽宁华北落叶松二元立木材积表。 相似文献
9.
10.
11.
河南省欧美杨立木材积表的编制研究 总被引:2,自引:0,他引:2
欧美杨是河南省的主要用材树种。为准确估测欧美杨的材积,需要编制欧美杨立木材积表。通过外业样地调查,取得1763株样木数据,用1591株建立了立木材积模型,并用172株样木进行了使用精度检验,结果表明,该材积模型适用于河南省,且精度很高。据此编制了河南省欧美杨立木材积表。 相似文献
12.
13.
A forest biomass yield table based on an empirical model 总被引:1,自引:0,他引:1
Tomohiro Nishizono Toshio Iehara Hirofumi Kuboyama Miki Fukuda 《Journal of Forest Research》2005,10(3):211-220
We report an empirical model for estimating unutilized wood biomass, and its application to Cryptomeria japonica D. Don and Larix kaempferi in Tohno City, Iwate Prefecture, northeast Japan. Outputs from the model are the quantity of unutilized wood biomass and merchantable volume produced by timber harvest. The unutilized wood biomass is divided into stumps, tops, branches, foliages, small trees, and unutilized stems due to their defects. Inputs to the model are mean diameter at breast height (DBH), mean tree height, trees per unit area, and timber utilization standards. DBH distribution, DBH–height curve, stem form, bark thickness, and relationship of stem biomass to foliage and branch biomass could be described by the proposed model, indicating its validity. The proposed model enables us to develop the forest biomass yield tables modified from the existing stem volume yield tables. The developed forest biomass yield tables indicated that the unutilized wood biomass due to defects accounted for the largest part of the whole unutilized wood biomass, and that the ratio of unutilized parts in stem volume to total stem volume could vary with stand age and site productivity class. Based on a comparison of the developed forest biomass yield tables with those reported previously, we concluded that the proposed model-based forest biomass yield table would be useful for estimating the quantity of unutilized wood biomass. 相似文献
14.
15.
Forest volume, the major component of forest biomass, is an important issue in forest resource monitoring.It is estimated from tree volume tables or equations. Based on tree volume data of 1840 sample trees from Chinese fir (Cunninghamia lanceolata) plantations in Guizhou Province in southwestern China, parallel one- and two-variable tree volume tables and tree height curves for central and other areas were constructed using an error-in-variable modeling method. The results show that, although the one-variable tree volume equations and height curves between the central and other areas were significantly different, the two-variable volume equations were sufficiently close, so that a generalized two-variable tree volume equation could be established for the entire province. 相似文献
16.
广西速丰桉林分二元材积生长率表研制 总被引:1,自引:0,他引:1
速丰桉一年四季生长,没有明显年轮的特征,难以对单株木进行树干解析确定林木生长量。在没有足够数量的固定标准地连续定期监测数据的情况下,采取临时标准地年龄序列的调查方法,选用适当模型结构,再通过引进可变参数改进生长模型,建立以年龄、胸径为基础的林分材积生长率模型,并编制广西速丰桉林分二元材积生长率表。经检验,方法可行,预估精度满足林业数表建模要求,可应用于速丰桉林材积生长量的预估。 相似文献
17.
西江林业局尾巨桉人工林一元材种出材率表编制 总被引:1,自引:0,他引:1
在广东省西江林业局尾巨桉无性系人工林中选择并设置70个标准地,分别进行林分因子调查,同时选择163株样木以2.0 m或2.6 m段材长分径阶进行样木伐倒造材,以实际经济材造材出材率为基础拟合并选择较优的单株木一元材积比方程,然后根据材积比方程进行理论造材并编制尾巨桉单株木一元经济材出材率表;接着利用单株木一元经济材出材率表对所调查的标准地进行理论造材,以林分理论造材出材率为基础拟合并选择较优的林分一元材积比方程,最后根据材积比方程研制尾巨桉林分一元经济材出材率表。所编制的数表均符合国家精度检验标准,可为本地区桉树生产经营提供参考。 相似文献
18.