首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Cycloastragenol (CA) is the genuine sapogenin of astragaloside IV (ASI). This study focuses on the preparation of CA from ASI. Five hydrolysis methods were compared including H2SO4 hydrolysis, HCl hydrolysis, two-phase acid hydrolysis, mild acid hydrolysis, and Smith degradation. Seven hydrolysis products were purified, and five of them were identified as new compounds. The results indicated that Smith degradation was the most effective approach to prepare CA. In contrast, mild acid hydrolysis produced CA at a low yield, accompanied with the artificial sapogenin astragenol. The other three acid hydrolysis methods mainly produced astragenol. Furthermore, the reaction conditions for Smith degradation were optimized as follows: ASI was dissolved in 60% MeOH–H2O solution, oxidized with 5 equiv. NaIO4 for 12 h, followed by reduction with 3 equiv. NaBH4 for 4 h, and finally acidified with 1 M H2SO4 at pH 2 for 24 h. Under the optimal conditions, CA could be prepared from ASI at a yield of 84.4%.  相似文献   

2.
Lysimeters consisting of intact soil cores, including field- and ground-layer vegetation, from a sandy podzol were treated with irrigation water, H2SO4 or NPK and combinations thereof. The acid and fertilizer applications corresponded to 100 kg H2SO4 per ha annually and a total of 360 kg N per ha, respectively. Precipitation and leachates from the lysimeters were analyzed for main chemical constituents during a 6-year-period. There-after the experiment was terminated and the cores were fractionated into appropriate vegetation and soil strata. Chemical analyses of the soil revealed a significant increase of exchangeable aluminium in the B- and B/C-horizons due to H2SO4 application, accompanied by a decrease of magnesium in the same horizons.The fertilizer caused a net depletion of magnesium in the B- and B/C-horizons mainly due to high levels of replacing cations other than magnesium and correspondingly high levels of mobile anions.Budget calc.ulations indicated increased weathering of magnesium and calciu acid treatment. There were also indications of a calcium adsorption from the irrigation water.H+ activity estimated from pH measuremetns in 0.001 M CaCl2, had increased in the A0-horizon, in lysimeters treated with sulphuric acid, probably an effect of aluminium hydrolysis. There was a slight in activity in the A0-horizon of the fertilized lysimeters.  相似文献   

3.
The chemical conversion of red pine sulfuric acid lignin (Klason lignin) (SAL) as an acid hydrolysis lignin sample to water-soluble arylsulfonates of lignin derivation (i.e., phenolized SAL) was investigated. Treatment of phenolized SAL with chlorosulfonic acid followed by alkali hydrolysis gave water-soluble sulfonated products with a sulfonic acid group on their aromatic nuclei quantitatively. The products possess 2.0 SO3Na/C9 C6. In contrast, the content of sulfuric acid group in sulfonated SAL was only 0.33C9. Chlorosulfonation of 1-guaiacyl-l-p-hydroxyphenylethane as a phenolized guaiacyl lignin model compound revealed that the sulfonyl chloride group was introduced at thepara position of an aromatic methoxyl group, theortho position of a phenolic hydroxyl group, or both.  相似文献   

4.
Intercalation of wood charcoal with sulfuric acid (H2SO4) was investigated. Carbonized sugi (Japanese cedar) samples were prepared by heating at various temperatures in the range 1700°–2700°C. Electrochemical oxidization was carried out in H2SO4 and the feasibility of intercalation was determined. In potentiometric analysis, plateaus appeared for samples carbonized at temperatures above 2300°C. In their X-ray diffraction profiles, the peak at around 26° was shifted to a smaller angle of about 22.4°. These results can be considered as signs of intercalation with acid molecules. Fourier transform infrared analysis of charcoal heated at 2700°C, following washing with water and drying of the sample, showed a band at 1220 cm−1 that was assigned to a sulfonate group. This band was not observed for samples heated at 1900°C. These observations suggest the occurrence of intercalation in the former charcoal, but not in the latter. It is concluded that wood charcoal can undergo intercalation when it has ordered stacking of hexagonal carbon layers. Part of this article was presented at the 55th, 56th, and 57th Annual Meetings of the Japan Wood Research Society, Akita, Hiroshima, and Tsukuba, August 2006, August 2007, and March 2008, respectively, and at the International Conference on Carbon “CARBON 2008,” Nagano, July 2008  相似文献   

5.
To characterize the mechanism of the reaction of lignin with aqueous acetic acid (AW) containing a small amount of H2SO4, guaiacylglycerol--guaiacyl ether (GOG), and guaiacylglycerol--syringol ether (GOS) were refluxed in 90% AW with 0.28% H2SO4 for 0–120 min. Reaction products and their silylated derivatives were characterized by analytical methods such as gas chromatography-mass spectrometry and nuclear magnetic resonance. When the model compounds were allowed to react at boiling temperature for 0 min (heat-up time 30 min), most of their primary alcohol groups and some of their secondary alcohol groups were acetylated, but their phenolic groups were not. About 90% of GOG was degraded, polymerized, or both during boiling for at least 15 min, yielding guaiacol and isocoumaran compounds (GOG-e and GOG-f) in addition to homovanillin (II) as guaiacylvinyl alcohol (I) and other minor products. GOS yielded syringol, homovanillin (II), and a novel compound (V) together with unknown products but not the corresponding isocoumaran compounds.  相似文献   

6.
Natural forest succession takes a long time to accumulate sufficient nutrients to support plant growth and enhance soil microbial activity. Human intervention in selecting native pioneer plant species is therefore required to accelerate sustainable restoration. Trema orientalis (L.) Blume, a fast growing pioneer plant species, has the ability to grow in nutrient deficient soils and proves to have reclamation potential in mine wastelands. However, its use has been limited due to low germination percentages and nonsynchronous seed germination. In the present study we tested the effect of sulphuric acid (H2SO4), hydrochloric acid (HCl), gibberellic acid (GA3), and potassium nitrate (KNO3) in varying concentrations and time durations on germination percentages and seed germination synchrony. We found that all treatments had a significant effect in predicting seed germination probabilities. Logistic regression analysis revealed that treatment solution and concentration had a significant effect on seed germination. Treatment with concentrated H2SO4 for 15 min increased germination up to 92% within 20 days with the least imbibition time (8 days) and highest Seedling Vigor Index (491). The scanning electron microscope images of seeds treated with H2SO4 showed complete dissolution of the honeycomb-like network of deposits on the seed coat surface removing the physical barrier and enhancing germination.  相似文献   

7.
 The chemical conversion of phenolized sulfuric acid lignin (P-SAL), prepared from sulfuric acid lignin (SAL) by phenolation with sulfuric acid catalyst, to novel cationic surfactant was investigated. To elucidate the chemical reactivity of the P-SAL to a Mannich reaction, 1-guaiacyl-1-p-hydroxyphenylethane (I) as a simple phenolized sulfuric acid lignin model compound was reacted with dimethylamine and formaldehyde. Quantitative analysis of the products by gas-liquid chromatography suggested that the p-hydroxyphenyl nucleus was more reactive than the guaiacyl nucleus. The Mannich reaction of SAL with dimethylamine did not yield a soluble cationic surfactant, but P-SAL produced water-soluble cationic surfactant in a quantitative yield. The Mannich reaction products (MP-SAL) of P-SAL had 1,3-dimethylaminomethyl groups/C9-C6. The results of the surface tension measurements showed that the decrease in surface tension of MP-SAL was much larger than that of lignosulfonate as a commercial surfactant from lignin.  相似文献   

8.
Handsheets were prepared with aluminum sulfate under various conditions of pulp suspension, and factors influencing retention behavior of aluminum components on the handsheets were studied on the basis of their aluminum contents. When deionized water was used in the handsheet-making process, aluminum contents in the handsheets had a plateau level of 0.7mg/g in the range of 1%–8% Al2(SO4)3 addition levels on dry weight of pulp. On the other hand, when tap water was used aluminum contents increased up to 5.6 mg/g, increasing the Al2(SO4)3 addition levels to 8%. The high aluminum contents in the handsheets are explained in terms of pH and the presence of calcium ions from the tap water used. Cationic aluminum species, which are formed from aluminum sulfate added to pulp suspensions, are primarily adsorbed on pulp fibers by electrostatic interactions with carboxyl groups in the pulp, competing with OH– ions in water. These aluminum components, once adsorbed on pulp fibers by ionic interactions, are not removed from the fibers by extending the stirring time of the pulp suspensions.This research was presented in part at the 48th annual meeting of the Japan Wood Research Society in Shizuoka, April 1998  相似文献   

9.
To elucidate the formation mechanism of acidsoluble lignin (ASL) formed in the Klason lignin determination, beech wood meals were treated with sulfuric acid (SA) under various conditions, and the ASL solution was extracted with CHC13. The results indicated the following: (1) wood components yielding ASL are dissolved in 72% SA during the initial stage; (2) the quantity of ASL is highest during the initial stage, then decreases with prolonged time of 72% SA treatment and finally reaches a constant value; (3) soluble lignin prepared by 72% SA treatment and subsequent standing in 3% SA again yield insoluble Klason lignin and ASL after boiling in 3% SA; and (4) about half the amount of ASL is dissolved in CHC13. The foregoing suggest that wood components yielding ASL are dissolved in 72% SA at the beginning and finally change to ASL after being subjected to depolymerization, hydrolysis, and other reactions. ASL may thus be composed of low-molecular-weight degradation products and hydrophilic derivatives of lignin.  相似文献   

10.
In this work, different activated carbons were prepared from composites based on birch sawdust and coal-tar pitch by chemical activation with zinc chloride, phosphoric acid, and potassium hydroxide followed by carbonization. The influence of different chemical agents (ZnCl2, KOH, and H3PO4), final temperature of carbonization and media on yield and structural properties of the carbonic product was studied. It was shown that chemical agents allow increasing yield of carbonic residue. Composite modification by H3PO4 or ZnCl2 facilitates the formation of molded porous carbonic residue during the carbonization process. However, addition of KOH to the composite leads to formation of powder-like carbonic residue having a specific surface area of 1,600 m2 g?1 at 800 °C. It was established that all samples aged in air medium at 800 °C have higher values of specific surface area in comparison with the same samples aged in argon medium at similar conditions.  相似文献   

11.
Maximizing seed germination in two Acacia species   总被引：1，自引：0，他引：1  
Revegetation of disturbed land, particularly in arid environment, is often hindered by low seedling establishment. Information on seed biology and germination cues of valuable species is lacking. We investigated seed germination of two Acacia species (Acacia tortilis (Forsk.) Hayne and Acacia oerfota (Forssk) schweinf), required for nitrogen fixation and rehabilitation of arid and semi-arid areas.(four pre-germination seed treatments were applied in order to find the best treatment in germinating acacia species. The medium was L2 and three replicates were used. Seeds pre-treated with sand paper and also with H2SO4 and then H2O2 had the highest germination percentage in both species. The lowest germination percentage resulted from soaking seeds in water for 48 h followed by soaking in H2SO4 for A. oerfota and from soaking in water for 24 h for A. tortilis. Because the use of sand paper is difficult and time consuming, we recommend pre-treatment of A. tortilis and A. oerfota seeds with H2SO4 and H2O2 before planting. Our study results are significant for conservation agencies with an interest in optimizing germination in arid zones for rehabilitation and reforestation.  相似文献   

12.
The steam explosion (SE) pretreatment associated with the organosolv process was investigated to produce dissolving pulp from eucalyptus. Prehydrolysis Kraft (PHK) pulping was also done to produce viscose and acetate grade pulps as reference. The organosolv pulps were delignified in two steps with sodium chlorite. Viscose and acetate grade PHK pulps were bleached by OD0(EH)D1P and OD0(EP)D1PCCE sequences, respectively. Dilute acid-catalyzed (with acid addition) SE pretreatment dissolved more xylan than auto-catalyzed (no acid addition) SE pretreatment. Steam-exploded unbleached organosolv pulps showed lower residual lignin content and screened yield than unbleached organosolv pulps without SE pretreatment. Steam explosion pretreatment helped to decrease lignin content and damaged fiber length of unbleached organosolv pulps. The 1.0% H2SO4 organosolv pulp (organosolv dissolving pulp at bioconversion conditions) showed the highest reactivity. Even showing low viscosity for some applications, in general, the organosolv dissolving pulps produced in this study can be used for making lyocell fibers.  相似文献   

13.
研究了一种用含有少量硫酸的乙酸溶液分离杨木成分的方法。考察了反应时间、乙酸浓度、液比和催化剂浓度对木材成分分离的影响。对分离出的木材三种成分进行了表征。结果表明,分离杨木成分的较佳条件为:硫酸浓度0.3%,液比6,反应时间3h和乙酸浓度90%。残渣的主要成分是α-纤维素和半纤维素。水不溶沉淀物(乙酰化木质素)的重均分子量分布在341到253之间,分散性系数分布在1.1到1.2这一窄范围内。糖分析结果表明,可溶性成分主要来源于半纤维素,以单糖形式存在。  相似文献   

14.
Cryptomeria japonica (Japanese cedar) wood was liquefied using polyethylene glycol (PEG-400 and PEG-600)/glycerol as the solvent with H2SO4 as a catalyst. The blended epoxy resins were prepared by mixing the liquefied wood with epoxy resin of various weight ratios and used for wood gluing. The results showed that blended epoxy resins could cure under room temperature with an exothermic reaction. DSC thermoanalysis showed that increasing the blending amount of liquefied wood would shift the peak of curing reaction to a higher temperature but with less heat released. Blended epoxy resins had a good dry bonding strength for wood when cured at room temperature. However, curing with heat treatment could improve the wet bonding strength of blended epoxy resins, especially for those prepared with PEG-400-liquefied wood.  相似文献   

15.
The retention of applied 35S was studied in a lysimeter experiment, in which the lysimeters, consisting of soil columns with intact field and groundlayer vegetation, had previously been treated with either sulphuric acid, NPK or a combination of sulphuric acid and NPK.35S was applied as Na235SO4 to all lysimeters in an amount corresponding to 2 kg S ha?1, 3 months before the termination of the experiment. Of the applied 35S, 4.7 ± 1.6% (the error term showing the standard error of the mean) was leached from the lysimeters; 35SO42?, was preferentially sorbed in the upper part of the B horizon, >61% being sorbed in the B horizon as a whole. The influence of previous treatments was seen in SO42? content in the B horizon and also in the SO42? concentrations in the leachates from the lysimeters. Sorption of 35SO42? was enhanced by the acid treatment in the A0 and A1/A2 horizons. Ratios between water-extractable SO42? and KCl-extractable SO42? varied from 0.88 in the A1/A2 horizon to 0.46 in the lower part of the B horizon, indicating a preferential sorption of less available SO42? fractions in that part of the soil.Significant positive correlations between soil organic carbon and various sulphur fractions, both labelled and unlabelled, indicated the importance of biological S transformations in the A0 and A1/A2 horizons.Positive correlations between KCl-extractable Al and KCl-extractable SO42? were found in the B horizon. Equilibrium calculations suggested that the SO42? activity and Al3+ activity in leachates from control and acidified lysimeters were within the stability fields of basaluminite (Al4(OH)10SO4), activities in leachates from the latter group of lysimeters, also being close to jurbanite (Al(OH)SO4).  相似文献   

16.
The study assessed the effects of seed sources and pretreatments on the germination of Dialium guineense Willd. Seeds were collected from four sources in Nigeria: Ijebu-Ode, Iperu, Odogbolu, and Moniya. Six hundred seeds from each progeny were weighed to determine differences in seed weight. Seeds were pretreated using six treatments: control, soaking in water at 90°C and allowing to cool overnight, soaking in water at room temperature, soaking in concentrated sulphuric acid (H2SO4) for 5 min, 10 min, and 15 min represented as T1, T2, T3, T4, T5, and T6, respectively. Thirty seeds were assigned to each treatment with three replicates for all the seed sources studied. Seeds were sown in germination trays containing washed-sterilized river sand and set under high humidity propagator. Germination counts were taken daily until no further germination took place for 7 d. In all the progeny sources studied, T6 gave the highest mean germination percentage of 59.2 followed by T5 (57.5), T4 (35.8), T2 (21.7), T1 (8.3), while T3 gave the lowest value of 6.7. Analysis of variance revealed significant differences at p ≤ .05 in seed weight, mean germination percentage among seed sources, and treatments. Velvet tamarind has inherent seed coat dormancy that can be removed by pretreatment with concentrated H2SO4 for 10 and 15 min.  相似文献   

17.
To examine the effects of elevated N and S inputs on a central hardwood forest, a whole-watershed acidification experiment was initiated in 1989 on the Fernow Experimental Forest, West Virginia. Annual experimental additions of 40 kg S ha−1 year−1 and 35 kg N ha−1 year−1 as ammonium sulfate fertilizer were applied to a 34 ha watershed with a 25-year-old stand of central Appalachian hardwoods. An adjacent watershed served as the control. After 5 years of treatment (total additions of 275 kg S ha−1 and 220 kg N ha−1), stream water NO3−, Ca2+, Mg2+ concentrations and export increased. Soil solution concentrations provide evidence that the treatment watershed is nitrogen-saturated, which was unexpected for such a young stand. No statistically significant changes in annual SO42− export were observed, but peak stream water concentrations of SO42− did increase during the treatment period. Changes in soil solution chemistry suggest that the treated watershed also may be approaching SO42− saturation.  相似文献   

18.
The effects of the absorption of artificial acidic solutions only from below-ground parts on root systems were examined for 60 days in summer and 72 days in fall using cuttings and saplings of Japanese red cedar (Cryptomeria japonica D. Don). Cuttings and saplings absorbed the solutions through the potted soils from the reservoir of an autoirrigator and/or a simplified-autoirrigator. Nitric acid solutions of pH 2.0, 4.0 and 6.0 and distilled water (control) were used in summer, mixtures of H2SO4 and HNO3 solutions of pH 2.0, 3.0 and 4.0, HNO3 solution of pH 3.0, H2SO4 solution of pH 3.0 and distilled water (control) were used in fall. Although no detrimental effects of acidic solutions on saplings were observed, the rooting rate of cuttings treated at pH 2.0 in summer was significantly lower than that of the control. Root lengths and root dry weight per cutting at pH 2.0 in summer and fall were smaller than those of the control, and the difference in fall was significant. The present study revealed that the acidic treatment only from below-ground parts had detrimental effects on the root systems of cuttings, suggesting the importance of quantification of the effects on below-ground parts, as well as on above-ground parts, to evaluate the effects of acidic precipitation on trees.  相似文献   

19.
A germination experiment of pre-treated seeds of Melia azedarach was conducted in the nursery of Forestry and Wood Technology Discipline, Khulna University, Bangladesh. Matured seeds of Melia azedarach were collected from healthy trees of National Botanical Garden, Bangladesh and were treated with five pre-sowing treatments (control, immersion in cold water, immersion in hot water, scarification with sand paper, and immersion in concentrated H2SO4) on seed germination. Results revealed that the germination rates of pre-sowing treated seeds were significantly increased compared to those in control, except for cold water treatment. The highest germination success (80%) was found in scarification with sand paper, followed by 74% and 69% in immersion in H2SO4 and hot water treatment, respectively. Germination started on 8–11 days and completed on 20–21 days of the germination period in all cases. Analysis of variance showed the significance difference in germination success among the treatments but no significance difference in germination period among the treatment. Hot water treatment may be recommended on seed germination of the species in rural Bangladesh.  相似文献   

20.
The process of peroxide bleaching of Populus tomentosa kraft pulp with H2O2 pretreatment under acid condition was studied. The variations of pulp characteristics such as brightness, Kappa number and viscosity during the peroxide bleaching process were discussed and the concept of the A/B value was presented for the first time. The results show that acid pretreatment with H2O2 is essential to improve pulp brightness and avoid viscosity loss. The conclusion is reached that the A/B value has great influence on pulp properties when the total amount of peroxide used in the bleaching process is 2%–5%. Pulp with a high viscosity and brightness can be obtained when A/B is about 0.15. [Supported by the National “863” Project (Grant No. 2002AA241071)]  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号