首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Physicochemical properties of starch of three common (Fagopyrum esculentum) and three tartary (F. tataricum) buckwheat varieties from Shanxi Province, China, were compared. Starch color, especially b*, differed greatly between tartary (7.99–9.57) and common (1.97–2.42) buckwheat, indicating that removal of yellow pigments from tartary buckwheat flour may be problematic during starch isolation. Starch swelling volume in water of reference wheat starch (2.8% solids and 92.5°C) was 20.1 mL; for the three common buckwheat starches it was 27.4–28.0 mL; and for the three tartary buckwheat starches it was 26.5–30.8 mL. Peak gelatinization temperature (Tp) in water was 63.7°C for wheat starch, 66.3–68.8°C for common buckwheat and 68.8–70.8°C for tartary buckwheat. Tp of all samples was similarly delayed (by 4.0–4.8°C) by 1% NaCl. Enthalpy of gelatinization (ΔH) was higher for all six buckwheat starches than it was for wheat starch. However, one common buckwheat sample had significantly lower ΔH than the others. Starch pasting profiles, measured by a Rapid Visco-Analyzer, were characteristic and similar for all six buckwheat starches, and very different from the reference wheat starch. A comparison of pasting characteristics of common and tartary buckwheat starches to wheat starch indicated similar peak viscosity, higher hot paste viscosity, higher cool paste viscosity, smaller effect of NaCl on peak viscosity, and higher resistance to shear thinning. Texture profile analysis of starch gels showed significantly greater hardness for all buckwheat samples when compared to wheat starch.  相似文献   

2.
Starches of wheat, corn, smooth and wrinkled peas, and chickpeas were modified to a free‐flowing powder of granular cold‐water gelling (GCWG) starch using liquid ammonia and ethanol at 23°C and atmospheric pressure. Amylose content of starches was 26.3% in wheat, 27.1% in corn, 35.4% in chickpeas, 43.2% in smooth peas, and 79.9% in wrinkled peas. The modified starches remained in granular form with an increased number of grooves and fissures on the surface of the granules compared with native starch, while the crystallinity was mostly lost, as shown by X‐ray diffractograms and DSC endothermic enthalpies. Pasting viscosity of modified starches at 23°C was 171 BU and 305 BU in wheat and corn, respectively, and much higher in legume starches, ranging from 545 BU to 814 BU. Viscosities of modified legume starches at 23°C were at least twice as high as those of native starches determined at 92.5°C. Swelling power of modified starches at 23°C ranged from 8.7 g/g to 15.3 g/g, while swelling power of native starches heated to 92.5°C ranged from 4.8 g/g to 16.0 g/g. GCWG starches exhibited higher dextrose equivalent (DE) values of enzymatic hydrolysis, ranging from 25.2 to 27.0 compared with native starches (1.5–2.9). Modified starches from wheat, corn, smooth peas, and chickpeas formed weak gels without heat treatment and experienced no changes in gel hardness during storage, while native starch gels formed by heat treatment showed an increase in hardness by 1.1–7.5 N during 96 hr of storage at 4°C.  相似文献   

3.
The mechanical behavior of cowpea starch gels (10%, w/v) at small and large deformations were investigated in comparison with acorn, corn, and potato starches in storage at 4°C for seven days. The rapid viscograms of starch paste (7%, w/v) revealed that cowpea starch had a larger setback (1,135 cP) than other starches (465–830 cP), although peak viscosity (1,723 cP) and pasting temperature (76°C) were between those of corn and potato starches. Texture profile analysis of cowpea starch gel showed exceptionally higher values for hardness, gumminess, chewiness and initial modulus than other starch gels. Cowpea starch gel also exhibited higher G′ and smaller tan δ compared with other starch gels, regardless of the storage time. A creep test revealed that the cowpea starch gel could remain highly resistant to stress, showing the least deformation among the tested starch gels during storage up to seven days. The overall results disclosed that cowpea starch was capable of forming exceptionally strong and elastic gels with good storage stability.  相似文献   

4.
Retrogradation of du wx and su2 wx starches after different gelatinization heat treatments was studied by differential scanning calorimetry. Suspensions of 30% (w/w) starch were initially heated to final temperatures of 55–180°C. Gelatinized starch was cooled and stored at 4°C. Starch retrogradation in the storage period was influenced by initial heat treatments. Retrogradation of du wx starch was rapid: when initially heated to 80–105°C, retrogradation enthalpy was ≈10 J/g after one day at 4°C. The retrogradation enthalpy was ≈15 J/g after 22 days of storage, and reached a maximum of 16.2 J/g after 40 days of storage. For du wx starch, application of the Avrami equation to increases in retrogradation enthalpy suggests retrogradation kinetics vary with initial heating temperature. Furthermore, starch retrogradation may not fit simple Avrami theory for initial heating ≤140°C. Retrogradation of su2 wx starch was slow. After 30 days of storage at 4°C, the maximum retrogradation enthalpy for all initial heating temperatures tested was 7.0 J/g, for the initial heating to 80°C. This work indicates that gelatinization heat treatment in these starches is an important factor in amylopectin retrogradation, and that the effect of initial heat treatment varies according to the genotype.  相似文献   

5.
Three wheat flours, three wheat starches, a regular maize starch and a waxy maize starch were subjected to a number of different RVA profiles. Five different initial temperatures were used, 40, 50, 55, 60, and 65°C, with different initial holding times (0–3 min), heating times (2fl–10 min), holding times at 95°C (0–6 min), cooling times (2–6 min), and final hold times (0–10 min) being applied. A range of final temperatures of 30–60°C was also utilized. Significant variations in viscosity were observed with these conditions, particularly in wheat starch and flour. The most important parameters causing these variations were the initial temperature, the heating rate, and the final holding time. Short initial holding times also resulted in a wider spread of values for peak viscosity although there was little effect on the mean value and no significant effect on the holding strength or final viscosity. The final temperature was also important in that lower temperatures gave more viscous gels. Provided that the desired cooling rate could be achieved, varying the cooling time had no effect on the peak or trough viscosities and only a very minor effect on the final viscosity. If final temperatures of 40°C or lower are to be used, the cooling conditions and final hold time would need to be adjusted so that maximum viscosity could be achieved. A proposal for a standard Rapid Visco Analyser (RVA) procedure is: at least 1 min at 50°C, heat to 95°C over 4 min, hold at 95°C for 4 min, cool to 50°C in 3 min, and hold at 50°C for 4 min. These conditions should minimize variation within samples and should allow a better comparison between samples.  相似文献   

6.
The rheological and thermal properties of aged starch gels (15:85 starch-water) from three waxy maize genotypes (wx, wx sh1, and du wx) during storage (4°C for up to 25 days) were studied. After storage, changes of storage modulus (G′) and phase angle (δ) of the gels as a function of temperature were measured using oscillatory rheometry. For the du wx samples, G′ at 25°C increased rapidly during the first four days of storage at 4°C, compared to the gradual increases over the 25-day storage period for the wx and wx sh1 samples. A peak in G′ at 45°C was observed during heating for the du wx samples after 10 days of storage and for the wx sample stored for 25 days. The G′ peak may have been due to syneresis in the gels. Retrogradation of amylopectin of the aged starch samples was examined using differential scanning calorimetry. The du wx starch had greater retrogradation enthalpies than the other two samples (which showed similar retrogradation behavior) throughout the storage. The retrogradation enthalpy of the du wx samples increased rapidly during the first seven days, followed by a slower increase through the rest of storage. For the wx and wx sh1 samples, no endotherm was observed during the first four days of storage, after which the enthalpy increased steadily as a function of storage time. Addition of sucrose delayed the formation of gel networks for all three starches. The greater tendency for gelling and retrogradation of the du wx starch might be attributed to the greater proportion of DP20–30 chains of the amylopectin.  相似文献   

7.
The influence of bran particle size on bread‐baking quality of whole grain wheat flour (WWF) and starch retrogradation was studied. Higher water absorption of dough prepared from WWF with added gluten to attain 18% protein was observed for WWFs of fine bran than those of coarse bran, whereas no significant difference in dough mixing time was detected for WWFs of varying bran particle size. The effects of bran particle size on loaf volume of WWF bread and crumb firmness during storage were more evident in hard white wheat than in hard red wheat. A greater degree of starch retrogradation in bread crumb stored for seven days at 4°C was observed in WWFs of fine bran than those of coarse bran. The gels prepared from starch–fine bran blends were harder than those prepared from starch–unground bran blends when stored for one and seven days at 4°C. Furthermore, a greater degree of starch retrogradation was observed in gelatinized starch containing fine bran than that containing unground bran after storage for seven days at 4°C. It is probable that finely ground bran takes away more water from gelatinized starch than coarsely ground bran, increasing the extent of starch retrogradation in bread and gels during storage.  相似文献   

8.
Manufacture of pasta products is paramount for durum wheat (Triticum turgidum L. var. durum). The recent development of waxy durum wheat containing starch with essentially 100% amylopectin may provide new food processing applications and present opportunities for value‐added crop production. This investigation was conducted to determine differences in some chemical and functional properties of waxy durum starch. Starch was isolated from two waxy endosperm lines and four nonwaxy cultivars of durum wheat. One of the waxy lines (WX‐1) was a full waxy durum wheat whereas the other line (WX‐0) was heterogeneous, producing both waxy and nonwaxy seed. Effects on starch swelling, solubility, pasting, gelatinization, and retrogradation were examined. The full waxy starch had four times more swelling power than the nonwaxy durum starches at 95°C, and was also more soluble at three of the four temperatures used. Starch pasting occurred earlier and peak viscosities were greater for starches from both waxy lines than for the nonwaxy starches, but their slurries were less stable with continued stirring and heating. Greater energy was required to melt gelatinized waxy starch gels, but no differences were found in either refrigerated storage or freeze‐thaw retrogradation, as determined by differential scanning calorimetry. The results of this investigation showed some significant differences in the starch properties of the waxy durum wheat lines compared to the nonwaxy durum wheats.  相似文献   

9.
A waxy spring wheat (Triticum aestivum L.) genotype was fractionated into flour and starch by roller and wet‐milling, respectively. The resultant flour and starch were evaluated for end‐use properties and compared with their counterparts from hard and soft wheats and with commercial waxy and nonwaxy corn (Zea mays L.) starches. The waxy wheat flour had exceptionally high levels of water absorption and peak viscosity compared with hard or soft wheat flour. The flour formed an intermediate‐strength dough that developed rapidly and was relatively susceptible to mixing. Analysis by differential scanning calorimetry and X‐ray diffractometry showed waxy wheat starch had higher gelatinization temperatures, a greater degree of crystallization, and an absence of an amylose‐lipid complex compared with nonwaxy wheat. Waxy wheat and corn starches showed greater refrigeration and freeze‐thaw stabilities than did nonwaxy starches as demonstrated by syneresis tests. They were also similar in pasting properties, but waxy wheat starch required lower temperature and enthalpy to gelatinize. The results show analogies between waxy wheat and waxy corn starches, but waxy wheat flour was distinct from hard or soft wheat flour in pasting and mixing properties.  相似文献   

10.
Retrogradation in 2% pastes prepared from unmodified commercial starches by cooking at 98–100°C under low shear, then held at 4°C for 56 days, was examined by turbidometric analysis and light microscopy. Turbidometric analysis revealed that retrogradation rates followed the order of wheat, common corn > rice, tapioca, potato ≫ waxy maize. Microstructures of stored pastes were examined both before and after centrifugation. Granule remnant morphologies and fresh and stored paste microstructures were unique to each starch examined. Fresh pastes from amylose-containing starches were dominated by networked amylose that condensed into higher density aggregates upon storage. Unique phenomena seen in some stored pastes included interactions of granular remnants with aggregated amylose, composite networks of co-associated amylopectin and amylose, and slight birefringence regained by granule remnants. Microstructural changes in stored pastes could be related to changes in turbidity and to the results of other methods used to quantitate retrogradation.  相似文献   

11.
The effects of amylose content and other starch properties on concentrated starch gel properties were evaluated using 10 wheat cultivars with different amylose content. Starches were isolated from grains of two waxy and eight nonwaxy wheat lines. The amylose content of waxy wheat lines was 1.4–1.7% and that of nonwaxy lines was 18.5–28.6%. Starch gels were prepared from a concentrated starch suspension (30 and 40%). Gelatinized starch was cooled and stored at 5°C for 1, 8, 16, 24, and 48 hr. The rheological properties of starch gels were studied by measuring dynamic viscoelasticity with parallel plate geometry. The low‐amylose starch showed a significantly lower storage shear modulus (G′) than starches with higher amylose content during storage. Waxy starch gel had a higher frequency dependence of G′ and properties clearly different from nonwaxy starches. In 40% starch gels, the starch with lower amylose showed a faster increase in G′ during 48 hr of storage, and waxy starch showed an extremely steep increase in G′. The amylose content and concentration of starch suspension markedly affected starch gel properties.  相似文献   

12.
The objective of this study was to develop with thermoplastic extrusion amaranth starch derivatives and to characterize and evaluate their functionality as encapsulating agents of Bifidobacterium breve ATCC 15700 and Lactobacillus casei ATCC 334 during spray drying. The survival of both probiotics during storage at different water activities and at two storage temperatures, their viability in a food model system, and their tolerance to a simulated gastrointestinal tract were determined. Native amaranth starch was chemically modified to obtain phosphorylated, acetylated, and succinylated starch. Starch derivatives were reduced in viscosity, and the solubility in water was increased. In general, the modified amaranth starches and control corn starch did not provide good protection to both probiotics during storage at 25°C. However, there was excellent viability during storage at 4°C for both probiotics. Microcapsules showed a uniform coverage of the cells. Storage for 35 days at 25°C of blends of oat with succinylated amaranth microcapsules with probiotics had a lower reduction. Also, this succinylated amaranth starch containing probiotics showed a higher resistance to simulated gastrointestinal conditions. The results with food model systems supported the applicability of the modified starches.  相似文献   

13.
The effect of ice structuring proteins (ISP, 0.5%, starch weight basis) on the freeze‐thaw stability of corn and wheat starch gels (CS and WS, respectively) was studied. Syneresis measurement, hardness, thermal properties using differential scanning calorimetry (DSC), X‐ray diffractions, and scanning electron microscopy (SEM) were determined with starch gels (SG) subjected up to nine freeze‐thaw cycles (FTC). The gelatinized SG were stored at –20°C for 22 hr and thawed at 30°C for 2 hr. As the number of FTC increased, syneresis was increased; however, ISP significantly (P < 0.05) reduced the syneresis for all FTC except at FTC 1. Hardness was increased up to FTC 4, then decreased for both SG. ISP significantly lowered the hardness of both SG. The ice melting enthalpy (ΔHice sample) of SG increased as FTC increased but SG with ISP had significantly lower enthalpy. The retrogradation ratio (RR) from DSC was significantly increased as the number of FTC increased. ISP reduced RR but most of RR was not significantly different for the corresponding FTC. The X‐ray diffraction patterns showed less recrystallization of WS with addition of ISP. The microstructures from SEM showed that the addition of ISP reduced the size of ice cell cavities.  相似文献   

14.
The effects of amylose content on thermal properties of starches, dough rheology, and bread staling were investigated using starch of waxy and regular wheat genotypes. As the amylose content of starch blends decreased from 24 to 0%, the gelatinization enthalpy increased from 10.5 to 15.3 J/g and retrogradation enthalpy after 96 hr of storage at 4°C decreased from 2.2 to 0 J/g. Mixograph water absorption of starch and gluten blends increased as the amylose content decreased. Generally, lower rheofermentometer dough height, higher gas production, and a lower gas retention coefficient were observed in starch and gluten blends with 12 or 18% amylose content compared with the regular starch and gluten blend. Bread baked from starch and gluten blends exhibited a more porous crumb structure with increased loaf volume as amylose content in the starch decreased. Bread from starch and gluten blends with amylose content of 19.2–21.6% exhibited similar crumb structure to that of bread with regular wheat starch which contained 24% amylose. Crumb moisture content was similar at 5 hr after baking but higher in bread with waxy starch than in bread without waxy starch after seven days of storage at 4°C. Bread with 10% waxy wheat starch exhibited lower crumb hardness values compared with bread without waxy wheat starch. Higher retrogradation enthalpy values were observed in breads containing waxy wheat starch (4.56 J/g at 18% amylose and 5.43 J/g at 12% amylose) compared with breads containing regular wheat starch (3.82 J/g at 24% amylose).  相似文献   

15.
Resistant starches (RS) were prepared by phosphorylation of wheat, waxy wheat, corn, waxy corn, high‐amylose corn, oat, rice, tapioca, mung bean, banana, and potato starches in aqueous slurry (≈33% starch solids, w/w) with 1–19% (starch basis) of a 99:1 (w/w) mixture of sodium trimetaphosphate (STMP) and sodium tripolyphosphate (STPP) at pH 10.5–12.3 and 25–70°C for 0.5–24 hr with sodium sulfate or sodium chloride at 0–20% (starch basis). The RS4 products contain ≤100% dietary fiber when assayed with the total dietary fiber method of the Association of Official Analytical Chemists (AOAC). In vitro digestion of four RS4 wheat starches showed they contained 13–22% slowly digestible starch (SDS) and 36–66% RS. However after gelatinization, RS levels fell by 7–25% of ungelatinized levels, while SDS levels remained nearly the same. The cross‐linked RS4 starches were distinguished from native starches by elevated phosphorus levels, low swelling powers (≈3g/g) at 95°C, insolubilities (<1%) in 1M potassium hydroxide or 95% dimethyl sulfoxide, and increased temperatures and decreased enthalpies of gelatinization measured by differential scanning calorimetry.  相似文献   

16.
Differential scanning calorimetry (DSC) was used to study the effect of sucrose on wheat starch glass transition, gelatinization, and retrogradation. As the ratio of sucrose to starch increased from 0.25:1 to 1:1, the glass transition temperature (Tg, Tg′) and ice melting enthalpy (ΔHice) of wheat starch‐sucrose mixtures (with total moistures of 40–60%) were decreased to a range of −7 to −20°C and increased to a range of 29.4 to 413.4 J/g of starch, respectively, in comparison with wheat starch with no sucrose. The Tg′ of the wheat starch‐sucrose mixtures was sensitive to the amount of added sucrose, and detection was possible only under conditions of excess total moisture of >40%. The peak temperature (Tm) and enthalpy value (ΔHG) for gelatinization of starch‐sucrose systems within the total moisture range of 40–60% were increased with increasing sucrose and were greater at lower total moisture levels. The Tg′ of the starch‐sucrose system increased during storage. In particular, the significant shift in Tg′ ranged between 15 and 18°C for a 1:1 starch‐sucrose system (total moisture 50%) after one week of storage at various temperatures (4, 32, and 40°C). At 40% total moisture, samples with sucrose stored at 4, 32, and 40°C for four weeks had higher retrogradation enthalpy (ΔH) values than a sample with no sucrose. At 50 and 60% total moisture, there were small increases in ΔH values at storage temperature of 4°C, whereas recrystallization of samples with sucrose stored at 32 and 40°C decreased. The peak temperature (Tp), peak width (δT), and enthalpy (ΔH) for the retrogradation endotherm of wheat starch‐sucrose systems (1:0.25, 1:0.5, and 1:1) at the same total moisture and storage temperature showed notable differences with the ratio of added sucrose. In addition, Tp increased at the higher storage temperature, while δT increased at the lower storage temperature. This suggests that the recrystallization of the wheat starch‐sucrose system at various storage temperatures can be interpreted in terms of δT and Tp.  相似文献   

17.
Freeze-thaw stability of amaranth, corn, wheat, and rice starches was determined measuring the percent of syneresis by centrifugation. Thermal properties were calculated by differential scanning calorimetry (DSC). The effects of salt (NaCl at 2 and 5%) and sugars (sucrose, glucose, and fructose at 10, 20, and 30%) on the freeze-thaw stability of amaranth starch were also studied. Based on DSC and centrifugation methods, amaranth starch had better stability after freezing and thawing through four cycles than did corn, wheat, and rice starches. Amaranth starch with added salt showed similar stability as compared with a control when measured by centrifugation and showed increased stability when measured by DSC. Adding sugars to amaranth starch gels had varying results, but for the most part, they showed similar or increased stability when compared with a control.  相似文献   

18.
The starch from eight ethyl methanesulfonate (EMS) treated M4 families of the corn (Zea mays L.) inbred line B73 was analyzed using differential scanning calorimetry (DSC), a Rapid Visco Analyser (RVA), a texture analyzer (TA), and scanning electron microscopy (SEM) coupled with image analysis. The eight families were chosen from 144 families previously selected for having starch with unusual DSC parameters. Apparent amylose contents of the starch from the eight families generally were lower than that of the control. According to DSC, starches from mutagenized families tended to have lower onset temperature (T0) of gelatinization, enthalpy (ΔH) of gelatinization, and peak height index (PHI), but broader gelatinization range (R) than the B73 control. Their values for ΔH and percentage of retrograzdation (%R) were clustered around that of the control. Pasting properties from the RVA of the starches from the M4 families also were clustered around those of the control B73 starch, except for the setback values which were lower than B73 for M4 starches. Gel firmness values, as measured by TA, of all the M4 starches were generally lower than that of the B73 starch at storage treatments of one day at 25°C or seven days at 4°C. The stickiness of the gels of the M4 starches tended to be greater than that of B73 after seven days of storage at 4°C. These observations were consistent with the lower apparent amylose values for the M4 starches. SEM and image analysis data revealed no differences among the treatments in granule size and shape. Possibly, EMS treatment altered the genes, affecting internal structure of the starch granules. Starch from the mutagenized families likely had lower bonding forces among molecules and fewer long chains in the amylopectin molecules than did B73.  相似文献   

19.
Retrogradation of three high-amylose starches (HAS: ae du, ae V, and ae VII) and common corn starch (CCS) was examined by dynamic oscillatory rheometry (7.5% [w/w] starch in 20% [v/v] dimethyl sulfoxide [DMSO]), differential scanning calorimetry (DSC; 30% [w/w] starch in water), and turbidity (0.5% [w/w] starch in 20% [v/v] DMSO). Nongranular lipid-free starch and starch fractions (amylose [AM], amylopectin [AP], and intermediate material [IM]) were studied. Gels were prepared by dispersing starches or fractions in 90% DMSO and diluting with water, followed by storage for seven days at 4°C. For AM from each starch, the elastic modulus (G′) was similar when heated from 6 to 70°C. The G′ of HAS AP gels at 6°C was higher than for CCS AP gels. For nongranular CCS and ae du gels, G′ dropped dramatically (≈100×) when heated from 6 to 70°C, less (≈10×) for ae V gels, and least (≈5×) for ae VII gels. By DSC, each AM endotherm had a peak temperature of ≈140°C, whereas all AP endotherms were complete before 120°C. Endotherms >120°C were not observed for any nongranular starch despite the high AM content of some starches. After cooling starch suspensions from room temperature to 5°C and subsequent rewarming to room temperature, each AM and the ae VII nongranular starch remained highly turbid. Each AP and the remaining nongranular starches lost turbidity during rewarming. Our work suggests that branched molecules of CCS and HAS influence gel properties of nongranular starches by inhibiting or altering AM-AM interactions.  相似文献   

20.
The water dynamics and retrogradation kinetics behavior of gelatinized wheat starch by either ultrahigh pressure (UHP) processing or heat are investigated. Wheat starch completely gelatinized in the condition of 90, 000 psi at 25 degrees C for 30 min (pressurized gel) or 100 degrees C for 30 min (heated gel). The physical properties of the wheat starches were characterized in terms of proton relaxation times (T2 times) measured using time-domain nuclear magnetic resonance spectroscopy and evaluated using commercially available continuous distribution modeling software. Different T2 distributions in both micro- and millisecond ranges between pressurized and heated wheat starch gels suggest distinctively different water dynamics between pressurized and heated wheat starch gels. Smaller water self-diffusion coefficients were observed for pressurized wheat starch gels and are indicative of more restricted translational proton mobility than is observed with heated wheat starch gels. The physical characteristics associated with changes taking place during retrogradation were evaluated using melting curves obtained with differential scanning calorimetry. Less retrogradation was observed in pressurized wheat starch, and it may be related to a smaller quantity of freezable water in pressurized wheat starch. Starches comprise a major constituent of many foods proposed for commercial potential using UHP, and the present results furnish insight into the effect of UHP on starch gelatinization and the mechanism of retrogradation during storage.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号