Purpose

This study was conducted to determine the existence of soil bacteria in soil by soil microbial fuel cell (SMFC). The main objectives were (1) to differentiate the type of soil which will influence the electricity production, (2) to demonstrate the impact of different volume of soil in the MFC and feeding MFC for long-term electricity production, and (3) to conclude that electricity production is directly proportional to the biofilm formation on the anode surface.

Materials and methods

MudWatt kits were purchased from Keego Technologies USA, and 22 identical SMFCs were designed to study the electricity production from agricultural soil (S1) and vermicompost soil (S2). Ten milliliters of bioslurry is fed in SMFC to study the stability of electricity production at different stages. Microbes were isolated and characterized from the surface of the electrode. Biofilm analyses were done by high-content screening (HCS) system using 10 μl of acridine orange (100 μg/ml) at different stages of biofilm, and scanning electron microscopy is applied to confirm the matured biofilm on the surface of the anode.

Results and discussion

Application of bioslurry at different stages of electricity production conquers the normal energy recovery of the SMFCs and S2 soil with bioslurry sample produced the highest open circuit voltage (OCV) of 2.8 V (460 days) and S1 soil sample with bioslurry produced 1.7 V (364 days). The difference between SMFCs and MudWatt kits significantly confirms that increasing the volume of soil in the anode part increases the electricity production. The maximum OCV of S1 and S2 in MudWatt kits were 1.5 V (90 days) and 1.8 V (190 days), respectively. Increased volume of soil in our SMFCs produce maximum OCV of 1.8 V (S1 for 173 days) and 2.2 V (S2 for 240 days), and HCS analysis of biofilm at different stages reveals that electricity production is directly proportional to the biofilm formation.

Conclusions

Thus, it was concluded that the nature of soil and soil bacterium is important for the electricity production, and S2 soil sample produces maximum electricity than the S1 soil sample. Feeding of SMFCs with bioslurry aids the long-term and stabilized electricity production in both the soil samples.

Purpose

Increasing data have shown that biochar amendment can improve soil fertility and crop production, but there is little knowledge about whether biochar amendment can improve water infiltration in saline soils. We hypothesized that biochar amendment could promote water infiltration in saline soil. The aims of this study were to evaluate the effects of biochar amendment on water infiltration and find the suitable amendment rate and particle size of biochar as a saline soil conditioner.

Materials and methods

We measured water infiltration parameters in a coastal saline soil (silty loam) amended with non-sieved biochar at different rates (0.5, 1, 2, 5, and 10%, w/w) or sieved biochar of different particle sizes (≤?0.25 mm, 0.25–1 mm, and 1–2 mm) at 1 and 10% (w/w).

Results and discussion

Compared with the control, amending non-sieved biochar at 10% significantly decreased water infiltration into the saline soil (P?<?0.05). In contrast, sieved biochar of ≤?0.25 mm significantly improved water infiltration capacity, irrespective of the amendment rate. Sieved biochar of 1–2 mm was less effective to improve soil porosity and when amended at 10%, it even reduced the water infiltration capacity. The Philip model (R²?=?0.983–0.999) had a better goodness-of-fit than the Green-Ampt model (R²?=?0.506–0.923) for simulation of cumulative infiltration.

Conclusions

Amending biochar sieved to a small particle size improved water infiltration capacity of the coastal saline soil compared with non-sieved biochar irrespective of the amendment rate. This study contributes toward improving the hydrological property of coastal saline soil and rationally applying biochar in the field.

Purpose

Anthropic activities induce severe metal(loid)s contamination of many sites, which is a threat to the environment and to public health. Indeed metal(loid)s cannot be degraded, and thus accumulate in soils. Furthermore, they can contaminate surrounding ecosystems through run-off or wind erosion. This study aims to evaluate the phytostabilization capacity of Salix viminalis to remediate As and Pb highly contaminated mine site, in a biochar-assisted phytoremediation context and to assess biochar particle size and dose application effects.

Materials and methods

To achieve this, mesocosm experiments were conducted using the contaminated technosol and four different size fraction of one biochar as amendment, at two application rates (2 and 5%). Non-rooted cuttings of Salix viminalis were planted in the different mixtures. In order to characterize the mixtures, soil pore waters were sampled at the beginning and at the end of the experiment and analyzed for pH, electrical conductivity, and metal(loid) concentrations. After 46 days of Salix growth, roots, stems, and leaves were harvested and weighed, and As and Pb concentrations and distributions were measured.

Results and discussion

Soil fertility improved (acidity decrease, electrical conductivity increase) following biochar addition, whatever the particle size, and the Pb concentration in soil pore water decreased. Salix viminalis did not grow on the non-amended contaminated soil while the biochar amendment permitted its growth, with a better growth with the finest biochars. The metal(loid)s accumulated preferentially in roots.

Conclusions

Fine biochar particles allowed S. viminalis growth on the contaminated soil, allowing this species to be used for technosol phytostabilization.

Purpose

Biochar is a carbon-rich product, able to enhance soil fertility and mitigate CO₂ emissions. While biochar effects on agriculture are becoming known, its impact elsewhere, e.g., on estuarine ecosystems, has yet to be assessed. The main aim of the present study was to determine the effect of biochar on sediment–water retention, CO₂ emissions from sedimentary organic carbon decomposition, sediment pH and electrical conductivity, in aerobic conditions similar to those observed at low tide.

Materials and methods

Sediments from the Mondego Estuary (Portugal) were mixed with pine gasification biochar at different doses (5, 10, 14 %) and immersed in water with different salinity values (15, 25, 30) for 96 h. The influence of biochar on water retention, the residence time of water and CO₂ emissions between ?0.75 and ?1.5 MPa, total organic carbon, pH and electrical conductivity (EC) were determined. Carbon chemical composition and polycyclic aromatic hydrocarbon (PAH) concentrations were determined in sediments and biochar. Differences between biochar treatments after immersion in different water salinities were analysed using the Kruskal–Wallis test.

Results and discussion

Results showed that biochar was able to (a) increase sediment–water content in terms of quantity and residence time, (b) decrease CO₂ emissions, but only with a specific soil–water content and at the highest biochar dose, (c) increase sediment pH at all biochar doses and (d) increase sediment EC at the highest biochar dose. In contrast, the percentage of carbon mineralised was not modified. Biochar carbon was rich in PAHs and less decomposable than sedimentary carbon. The increments observed in sediment pH and EC were unable to change sediment alkaline or saline status according to standard classifications.

Conclusions

Our results suggest that the remarkable water adsorption capacity of biochar–sediment mixtures may be considered the main factor in regulating CO₂ emission rates from sediments, together with high PAH concentrations, which probably restrain the organic matter decomposition process.

Purpose

Soil amendment with biochar can result in decreased bulk density and soil penetration resistance, and increased water-holding capacity. We hypothesized that adding biochar could moderate the reductions in infiltration rates (IR) that occur during high-intensity rainstorms in seal-prone soils, and hence result in reduced runoff and erosion rates. The objectives were to (i) evaluate biochar potential to improve infiltration and control soil erosion, and (ii) investigate the mechanisms by which biochar influences infiltration rate and soil loss.

Materials and methods

Rainfall simulation experiments were conducted on two physicochemically contrasting, agriculturally significant, erosion-prone soils of Israel that are candidates for biochar amendment: (i) non-calcareous loamy sand, and (ii) calcareous loam. Biochar produced from mixed wood sievings from wood chip production at a highest treatment temperature of 620 °C was used as the amendment at concentrations from 0 to 2 wt%.

Results and discussion

In the non-calcareous loamy sand, 2 % biochar was found to significantly increase final IR (FIR) by 1.7 times, and significantly reduce soil loss by 3.6 times, compared with the 0 % biochar control. These effects persisted throughout a second rainfall simulation, and were attributed to an increase in soil solution Ca and decrease in Na, and a subsequently decreased sodium adsorption ratio (SAR). In the calcareous loam, biochar addition had no significant effect on FIR but did reduce soil loss by 1.3 times. There were no biochar-related chemical changes in the soil solution of the calcareous loam, which corresponds to the lack of biochar impact on FIR. Surface roughness of the calcareous loam increased as a result of accumulation of coarse biochar particles, which is consistent with decreased soil loss.

Conclusions

These results confirm that biochar addition may be a tool for soil conservation in arid and semi-arid zone soils.

Purpose

Organic matter amendment is usually used to improve soil physicochemical properties and to sequester carbon for counteracting climate change. There is no doubt that such amendment will change microbial activity and soil nitrogen transformation processes. However, the effects of straw and biochar amendment on anammox and denitrification activity and on community structure in paddy soil are unclear.

Materials and methods

We conducted a 30-day pot experiment using rice straw and rice straw biochar to deepen our understanding about the activity, microbial abundance, and community structure associated with soil nitrogen cycling during rice growth.

Results and discussion

Regarding activity, anammox contributed 3.1–8.1% of N₂ production and denitrification contributed 91.9–96.9% of N₂ production; straw amendment resulted in the highest denitrification rate (38.9 nmol N g^?1 h^?1), while biochar amendment resulted in the highest anammox rate (1.60 nmol N g^?1 h^?1). Both straw and biochar amendments significantly increased the hzsB and nosZ gene abundance (p < 0.05). Straw amendment showed the highest nosZ gene abundance, while biochar amendment showed the highest hzsB gene abundance. Phylogenetic analysis of the anammox bacteria 16S rRNA genes indicated that Candidatus Brocadia and Kuenenia were the dominant genera detected in all treatments.

Conclusions

Straw and biochar amendments have different influences on anaerobic ammonia oxidation and denitrification within paddy soil. Our results suggested that the changes in denitrification and anammox rates in the biochar and straw treatments were mainly linked to functional gene abundance rather than microbial community structure and that denitrification played the more major role in N₂ production in paddy soil.

Purpose

Biochar application has been shown to be effective in improving soil fertility and sequestering soil contaminants. However, the impact of biochar amendments on the environmental fate of pesticides and the bioavailability of pesticides to living organisms in the soil environment is still not fully understood.

Materials and methods

Dissipation of fomesafen and its bioavailability to corn (Zea mays L.) and the earthworm Eisenia fetida in an agricultural soil amended with three different rates of rice hull biochar (0.5, 1, and 2 % (w/w)) under laboratory conditions was investigated.

Results and discussion

Biochar amendment significantly increased the DT₅₀ of fomesafen from 34 days in unamended soil to 160 days in 2 % biochar-amended soil. Furthermore, biochar amendment decreased fomesafen concentration in soil pore water resulting in lower plant uptake of the pesticide. In this case, total plant residue and soil pore water concentrations of fomesafen in 2 % biochar-amended soil decreased to 0.29 % and 0.28–45 % of that in the control, respectively. Similar results were obtained for bioavailability of fomesafen in earthworms, as the earthworm residue and soil pore water concentration of fomesafen in 2 % biochar-amended soil declined to 0.38–45 and 0.47–0.50 % compared to the level of the control, respectively.

Conclusions

As biochar could markedly reduce the concentration of fomesafen in soil pore water and subsequently reduce plant and earthworm uptake of fomesafen from contaminated soil, biochar amendment could be considered an appropriate option for immobilizing fomesafen in soils, protecting nontarget organisms from fomesafen contamination.

Purpose

A thorough understanding of mechanisms controlling sedimentation and erosion is vital for a proper assessment of the effectiveness of delta restoration. Only few field-based studies have been undertaken in freshwater tidal wetlands. Furthermore, studies that measured sediment deposition in newly created wetlands are also sparse. This paper aims to identify the factors controlling the sediment trapping of two newly created freshwater tidal wetlands.

Materials and methods

Two recently re-opened polder areas in the Biesbosch, The Netherlands are used as study area. Field measurements of water levels, flow velocities, and turbidity at both the in- and outlet of the areas were carried out to determine the sediment budgets and trapping efficiencies under varying conditions of river discharge, tide, and wind in the period 2014–2016.

Results and discussion

Short-term sediment fluxes of the two study areas varied due to river discharge, tide, and wind. A positive sediment budget and trapping efficiency was found for the first study area, which has a continuing supply of river water and sediment. Sediment was lost from the second study area which lies further from the river and had a lower sediment supply. The daily sediment budget is positively related to upstream river discharge, and in general, export takes place during ebb and import during flood. However, strong wind events overrule this pattern, and trapping efficiencies decrease for increasing wind strengths at mid-range river discharges and for the highest river discharges due to increased shear stress.

Conclusions

Delta restoration, based on sedimentation to compensate for sea-level rise and soil subsidence, could only be effective when there is a sufficient supply of water and sediment. Management to enhance the trapping efficiency of the incoming sediment should focus on directing sufficient river flow into the wetland, ensuring the supply of water and sediment within the system during a tidal cycle, creating sufficiently large residence time of water within the polder areas for sediment settling, and decreasing wave shear stress by the establishment of vegetation or topographic irregularities.

Purpose

Cohesive sediment is able to flocculate and create flocs, which are larger than individual particles and less dense. The phenomenon of flocculation has an important role in sediment transport processes such as settling, deposition and erosion. In this study, laboratory experiments were performed to investigate the effect of key hydrodynamic parameters such as suspended sediment concentration and salinity on floc size and settling velocity. Results were compared with previous laboratory and field studies at different estuaries.

Materials and methods

Experimental tests were conducted in a 1-L glass beaker of 11-cm diameter using suspended sediment samples from the Severn Estuary. A particle image velocimetry system and image processing routine were used to measure the floc size distribution and settling velocity.

Results and discussion

The settling velocity was found to range from 0.2 to 1.2 mm s^?1. Settling velocity changed in the case of increasing suspended sediment concentration and was controlled by the salinity. The faster settling velocity occurred when sediment concentration is higher or the salinity is lower than 2.5. On the other hand, at salinities higher than 20, in addition to increasing SSC, it was found that the situation was reversed, i.e. the lower the sediment concentration, the faster the settling velocity.

Conclusions

Sediment flocculation is enhanced with increasing sediment concentration but not with increasing salinity.

Purpose

Biochar, the by-product of thermal decomposition of organic materials in an oxygen-limited environment, is increasingly being investigated due to its potential benefits for soil health, crop yield, carbon (C) sequestration, and greenhouse gas (GHG) mitigation.

Materials and methods

In this review, we discuss the potential role of biochar for improving crop yields and decreasing the emission of greenhouse gases, along with the potential risks involved with biochar application and strategies to avoid these risks.

Results and discussion

Biochar soil amendment improves crop productivity mainly by increasing nutrient use efficiency and water holding capacity. However, improvements to crop production are often recorded in highly degraded and nutrient-poor soils, while its application to fertile and healthy soils does not always increase crop yield. Since biochars are produced from a variety of feedstocks, certain contaminants can be present. Heavy metals in biochar may affect plant growth as well as rhizosphere microbial and faunal communities and functions. Biochar manufacturers should get certification that their products meet International Biochar Initiative (IBI) quality standards (basic utility properties, toxicant assessment, advanced analysis, and soil enhancement properties).

Conclusions

The long-term effects of biochar on soil functions and its fate in different soil types require immediate attention. Biochar may change the soil biological community composition and abundance and retain the pesticides applied. As a consequence, weed control in biochar-amended soils may be difficult as preemergence herbicides may become less effective.

Purpose

Exoelectrogens are important microorganisms playing crucial roles in the biogeochemistry of elements in paddy soils. But it remains unclear how the soil properties and geographical distances affect the exoelectrogen communities of Chinese paddy soils. So the objectives of this study were to investigate the diversity and composition of these microbial communities which were enriched on the anodes of soil microbial fuel cells (SMFCs) and to elucidate the links between the microbial community compositions and their driving factors.

Materials and methods

We used Illumina HiSeq sequencing to determine the bacterial community structures which were enriched on the anodes of SMFCs. Variance partitioning analysis (VPA) was used to obtain the contribution of soil properties and geographical distance to the variations of bacterial communities.

Results and discussion

Active bacterial community on anodes of the closed circuit SMFCs differs significantly from the control open circuit SMFCs. Anodes of all the closed circuit SMFCs were characterized by the presence of high numbers of Nitrospira and Anaerolineae. Taxonomic similarities and phylogenetic similarities of bacterial communities from different paddy soil samples across North and South China were found to be significantly correlated with geographical distances. The relationship between the similarities and the geographic distance exhibited a distance-decay relationship. VPA showed that both geographical distances and soil properties affect the structure of bacterial communities detected on anodes.

Conclusions

Our study gives a foundation for understanding the distribution and diversity of exoelectrogens in paddy soils and elucidates the links between the distribution and the diversity of extracellular respiring bacteria and their driving factors. Furthermore, this study also identifies the crucial factors which should be used to evaluate the response of exoelectrogens to environmental perturbations in Chinese paddy soils.

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

Purpose

Soil aggregates play an important role in promoting soil fertility, as well as increasing the sink capacity and stability of soil carbon. In this study, we consider the following research questions:1. Under field conditions, do different dosages of biochar increase the soil aggregation after 3 years of application?2. How does the application of biochar affect the concentration and distribution of soil total organic carbon (TOC) and total nitrogen (TN) in different sizes of aggregates?3. Can the application of biochar alter the composition of organic carbon in soil aggregates?

Materials and methods

Different amounts of biochar (up to 90 t ha^?1) were applied to a calcareous soil in a field experiment in 2009 along with the application of chemical fertilizer annually and the returning of winter wheat and summer maize straws. After 3 years, 0–20-cm soil samples were taken to measure the size distribution of soil water-stable aggregates by wet sieving, the concentrations of TOC and TN in whole aggregates and light or heavy fractions by elemental analysis equipment, and composition of TOC by Fourier transform infrared (FTIR) and pyrolysis-gas chromatography/mass spectrometer (Py–GC/MS).

Results and discussion

(1) The 3 years of biochar application had no significant effects on degree of soil aggregation but reduced the breakage of large soil aggregates (>1000 μm); (2) biochar significantly increased the contents of TOC and TN in soil macro-aggregates (>250 μm), as well as their ratios to total soil amount. Biochar also significantly increased the contents of TOC and TN in light fractions as well as the C/N ratio, which made the soil organic matter more active. The biochar dosage showed a significant positive correlation with organic carbon, total nitrogen, and C/N ratio in light fraction components of aggregates (>250 μm). Biochar mainly affected the organic matter in the heavy fraction components of macro-aggregates; (3) from the Py–GC/MS results, biochar increased the CO₂ content originated from active organic carbon.

Conclusions

Long-term application of biochar improved the stability of soil aggregates, increased the contents of TOC and TN as well as organic carbon and total nitrogen in macro-aggregates, and usually increased the contents of CO₂ originated from active organic carbon in light fractions. The findings were helpful in evaluating the effects of biochar on soil aggregation and organic matter stability.

Purpose

Chromium, a potentially harmful element, occurs commonly within the urban sediment cascade as a result of abundant industrial and transport-related sources. The risks that Cr-bearing particles pose to ecosystems and humans depend on the solid-phase chemical speciation of Cr and its environmental mobility. In this study, we adopt an integrated geochemical approach to investigate and determine the long-term fate of Cr in the urban sediment cascade.

Materials and methods

We use bulk chemical digests, sequential chemical extraction analysis, electron microscopy, electron microprobe and microfocus XANES analysis to describe the solid-phase speciation, geochemical characteristics and potential long-term behaviour of Cr in urban particulate matter from both aquatic sediment and road dust sediment (RDS) in Manchester, UK.

Results and discussion

Cr-bearing grains within RDS and aquatic sediment are predominantly iron oxides and alumino-silicate glass grains. Electron microprobe analysis indicates Cr concentrations up to 3300 and 133,400 μg g^?1 in the RDS and aquatic grains, respectively. XANES analysis indicates that Cr(III) is the dominant oxidation state, with only trace amounts of Cr(VI). Importantly, Cr speciation does not appear to have changed between sedimentary environments and the dominance of Cr(III) suggests limited bioavailability or toxicity under predominant environmental (anoxic and neutral pH) conditions in the aquatic sediment sink. Furthermore, geochemical analyses suggest the environmental mobility of Cr in the aquatic sediment sink is low (compared to other toxic metals) due to its association mainly with alumino-silicate glass grains and its inclusion as an integral part of the glass structure.

Conclusions

Industrial glass grains are a major component of urban sediment worldwide. The speciation and geochemical investigations performed in this study suggest most Cr within the urban sediment cascade may be resistant to environmental processes that could mobilise other toxic metals.

Purpose

Previous studies show that application of biochar can reduce the bioavailability of heavy metals in soil. A plant growth experiment was carried out to evaluate the effect of tobacco stalk- and dead pig-derived biochars on the extractability and redistribution of cadmium (Cd) and zinc (Zn) in contaminated soil, and the impact on tobacco (Nicotiana tabacum L.) plant growth.

Materials and methods

The top 20 cm of a soil contaminated with Cd and Zn was used in this study. Biochars derived from tobacco stalk and dead pig were applied to the soil at four application rates (0, 1, 2.5, and 5 %), and tobacco plants were grown. After 80-days growth, the pH, electrical conductivity (EC), CaCl₂-extractable heavy metals and fractions of heavy metals in soil samples, as well as the plant biomass and the concentrations of heavy metals in the plant were determined.

Results and discussion

The plant growth experiment demonstrated that tobacco stalk biochar and dead pig biochar significantly (P?<?0.05) increased the pH, but had no significant effect on the electrical conductivity (EC) of the soil. The CaCl₂-extractable Cd and Zn content decreased as the application rates increased. The concentration of extractable Cd and Zn decreased by 64.2 and 94.9 %, respectively, for the tobacco stalk biochar treatment, and 45.8 and 61.8 %, respectively, for the dead pig biochar treatment at 5 % application rate. After biochar addition, the exchangeable Cd was mainly transformed to fractions bound to carbonates and Fe-Mn oxides, while the Zn was immobilized mainly in the fraction bound to Fe-Mn oxides. Tobacco stalk biochar increased the tobacco plant biomass by 30.3 and 36.2 % for shoot and root, respectively at the 5 % application rate. Dead pig biochar increased the tobacco plant biomass by 43.5 and 40.9 % for shoot and root, respectively, at the 2.5 % application rate. Both biochars significantly (P?<?0.05) decreased the Cd and Zn accumulation by tobacco plant.

Conclusions

As a soil amendment, tobacco stalk biochar was more effective at removing Cd, whereas dead pig biochar was more effective at removing Zn, and a higher application rate was more effective than a lower application rate. Overall, biochar derived from tobacco stalk was more effective, than dead pig biochar, at remediating soil contaminated with Cd and Zn, as well as promoting tobacco growth.

Purpose

The degeneration of fluvo-aquic soils due to long-term excessive fertilization is increasing in the Huang-Huai-Hai Plain, China. Products from crop straw and livestock breeding wastewater, biochar, and biogas slurry provide safe and efficient biomass resources for soil quality improvement. We assumed that biochar and biogas slurry could improve soil structure and soil water retention capacity for their special characteristics. The present study aimed to compare the effects of biochar and hoggery biogas slurry treatments on improvements to soil physical properties and water-holding capacity, and their different driving mechanisms.

Materials and methods

This study was based on a field experiment of four consecutive winter wheat–summer maize rotations on the Huang-Huai-Hai Plain, China. Using the principle of equal nitrogen inputs, three treatments were conducted: conventional farming fertilizers, biochar, and hoggery biogas slurry. The differences in indicators such as soil bulk density, total porosity, aggregate structure, saturated hydraulic conductivity, and hydraulic property parameters between different treatments were compared and analyzed. The driving factors generating these differences were also discussed.

Results and discussion

Compared to conventional fertilization, soil bulk density decreased under biochar and hoggery biogas slurry treatments, whereas soil total porosity increased after hoggery biogas slurry treatment. In the 0–20-cm soil layer, biochar treatment increased the content of >2-mm macrosoil aggregates and hoggery biogas slurry treatment increased the content of 0.25–0.5 or 1–2-mm soil aggregates. The soil saturated hydraulic conductivity in the 0–20-cm soil layer did not change significantly with biochar application, but increased with hoggery biogas slurry treatment. The application of biochar and hoggery biogas slurry improved the water-holding capacity, increasing the field capacity by 15.34 and 13.83 %, and the available water content by 16.20 and 25.87 %, respectively, in the 0–20-cm soil layer.

Conclusions

Both biochar and hoggery biogas slurry treatments significantly improved soil structure and water-holding capacity. Biogas slurry treatment significantly increased soil saturated hydraulic conductivity, soil aggregate content, while biochar treatment significantly decreased bulk density and increased total porosity of the soil.

Purpose

Biochar can be used to reduce the bioavailability and leachability of heavy metals, as well as organic pollutants in soils through adsorption and other physicochemical reactions. The objective of the study was to determine the response of microbial communities to biochar amendment and its influence on heavy metal mobility and PCBs (PCB52, 44, 101, 149, 118, 153, 138, 180, 170, and 194) concentration in application of biochar as soil amendment.

Materials and methods

A pot (macrocosm) incubation experiment was carried out with different biochar amendment (0, 3, and 6 % w/w) for 112 days. The CaCl₂-extractable concentration of metals, microbial activities, and bacterial community were evaluated during the incubation period.

Results and discussion

The concentrations of 0.01 M CaCl₂-extractable metals decreased (p?>?0.05) by 12.7 and 20.5 % for Cu, 5.0 and 15.6 % for Zn, 0.2 and 0.5 % for Pb, and 1.1 and 8.9 % for Cd, in the presence of 3 and 6 % of biochar, respectively, following 1 day of incubation. Meanwhile, the total PCB concentrations decreased from 1.23 mg kg^?1 at 1 day to 0.24 mg kg^?1 at 112 days after 6 % biochar addition, representing a more than 60 % decrease relative to untreated soil. It was also found out that biochar addition increased the biological activities of catalase, phosphatase, and urease activity as compared with the controls at the same time point. Importantly, the Shannon diversity index of bacteria in control soils was 3.41, whereas it was 3.69 and 3.88 in soils treated with 3 and 6 % biochar soil. In particular, an increase in the number of populations with the putative ability to absorb PCB was noted in the biochar-amended soils.

Conclusions

The application of biochar to contaminated soils decreased the concentrations of heavy metals and PCBs. Application of biochar stimulated Proteobacteria and Bacteroides, which may function to absorb soil PCB and alleviate their toxicity.

Purpose

Rivers feeding into the Loskop Dam, South Africa, pass through coal mining and heavily industrialised areas. Previous studies investigating mass mortalities of crocodile and fish in the river system, revealed the presence of organic compounds, including polycyclic aromatic hydrocarbons (PAHs), in their tissues.

Materials and methods

Samples were collected from nine sites within the dam in winter and summer. Liquid-liquid and microwave-assisted extraction was used for preconcentrating PAHs from water and sediment samples, respectively. Extracts were analysed by gas chromatography-mass spectrometry in the selected ion monitoring mode to determine the presence and levels of the 16 United States Environmental Protection Agency (US EPA)-priority PAHs.

Results and discussion

Significant levels of PAHs were found in both water and sediment samples. Concentrations were higher in sediments than in water, as well as in samples collected in winter. Levels of PAHs in sediments were generally higher than those reported by many researchers for other water bodies in industrialised areas. Zebrafish embryos were used to assess potential risks associated with the water and sediment, and to determine the effects of PAHs on aquatic life. Embryos, exposed to intact water and sediment samples, as well as to diluted sediment extracts, were monitored for 120 h post fertilisation. Sediment proved more toxic to zebrafish embryos than water, causing delayed embryo development and malformations.

Conclusions

These findings are alarming as they indicate that this water system is under stress. These findings can be typical of any water system situated in a coal mining and industrial region.

Purpose

This study was aimed to investigate the potential of biochar (BC), a waste byproduct of a bioenegy industry, Sri Lanka, as a soil amendment to immobilize and reduce the phytotoxicity of Cr in tannery waste-polluted soil (TWS).

Materials and methods

The TWS and bioenergy waste BC were characterized for physio-chemical parameters. A pot experiment was conducted by adding three BC application rates, 1, 2.5, and 5 % (w/w) to investigate the immobilizing capacity and bioaccumulation of chromium (Cr) in tomato plants (Lycopersicon esculentum L.). Soils and plants were digested via microwave digestion and analyzed for total Cr. Further, sequential extraction was conducted to assess the fractionation of Cr before and after the application of bioenergy waste BC on TWS.

Results and discussion

The total Cr concentration in TWS was 12,285 mg/kg. The biomass of tomato plants grown in the 5 % BC amendment doubled compared to the biomass in BC-unamended soil. Bioaccumulation of Cr in plants grown in 5 % BC-amended TWS showed a decrease by 97 % compared to that of the BC-unamended soil. The CaCl₂ extractability of Cr indicated that the bioavailability of Cr in the 5 % BC amendment has decreased by 68 % compared to the control. Sequentially extracted Cr in the exchangeable fraction decreased by 98 % in the 5 % BC amendment.

Conclusions

Pore diffusion, and adsorption via π-π electron donor-acceptor interactions were the primary mechanisms to be involved in the Cr retention in BC. Results suggested that the addition of BC to TWS reduces the mobility, bioavailability, and phytotoxicity of Cr in tomato plants.