首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The effects of high temperature, moisture, and mechanical action during the thermo-hydro-mechanical (THM) processing, on the changes in surface properties of poplar, namely, surface color, roughness, wettability, and microstructure, were investigated in this study. The correlation between observed changes in surface properties and chemical characteristics was also analyzed. Poplar woods with high moisture content were compressed using different pressures at temperature of 160 °C for four different periods. The wood surfaces became darker and smoother, and their surface free energy decreased significantly after the THM process. THM process markedly reduced surface hygroscopicity compared to the control wood. The cell lumens of THM wood became narrow with increasing compression ratio due to the enhancing high pressure. Collapse and fractures of cell walls developed during THM treatment. Furthermore, results indicated that a series of chemical reactions in different components of wood took place during THM process, such as degradation of hemicelluloses, condensation of lignin, and decomposition of extractives. In turn, these chemical modifications contributed to the darkening of color as well as the reduction of wettability and surface free energy of THM wood.  相似文献   

2.
为改善速生材自身固有的缺陷,提升其利用价值,需对速生材进行强化改性处理。木材压缩改性技术作为一种木材物理强化改性方法,具有生产效率高、无化学污染和易于产业化生产等优点,是扩展速生材应用范围最具潜在商业价值的木材改性技术之一,已成为木材改性研究领域的前沿和热点。笔者在广泛阅读文献的基础上,对木材压缩强化改性方面的代表性成果进行了梳理和总结,主要从木材压缩改性类别、木材软化、压缩木定型、木材压缩工艺、压缩木材性能及应用等方面进行了深入广泛的论述。最后,基于木材压缩改性的应用现状,对压缩改性技术研究中存在的问题以及未来发展趋势进行了分析展望。木材压缩改性技术有必要在高效型木材压缩改性技术开发、复合型木材压缩改性技术开发和森林?压缩木价值链评估方面取得突破,这些突破对推动木材压缩改性技术向商业化发展以及实现压缩木的高附加值利用具有重大意义。  相似文献   

3.
压前含水率对杉木间伐材压缩木性能的影响   总被引：3，自引：0，他引：3  
通过对杉木间伐材压缩密化的水分和物理力学性能进行分析,并观察木材微观结构的变化,可得出以下结果：1)压缩木各方向的水分分布不均匀,容易翘曲变形;2)水分对压缩木的物理力学性能有影响,压前含水率50％左右,压缩木硬度、抗弯弹性模量和抗弯强度最大,但冲击韧性随着压前含水率的增加呈下降趋势。从微观结构的观察可知,杉木间伐材压缩木的细胞只是被挤压,细胞腔变小而细胞壁未受到破坏。为了降低压后含水率,使水分分布均匀,可以采取两种办法：一是使初始含水率尽可能低,二是热压时间尽可能长。  相似文献   

4.
The paper describes for the first time the analysis of the structure of compressed wood using computed tomography. The anatomical structures of Douglas-fir and hybrid poplar before and after densification with the viscoelastic thermal compression (VTC) process were described by pore size distributions and mean pore sizes and compared. The compression of Douglas-fir mainly affected earlywood, while the compression of hybrid poplar mainly occurred in the vessels. In both wood species, the densification resulted in a significant decrease in the pore volumes. The porosity decreased to less than half of the original value for Douglas-fir earlywood and to approximately one-quarter for the vessels in hybrid poplar. The relevant mean pore sizes also decreased dramatically to about one-quarter compared to the original values. In contrast, latewood in Douglas-fir and libriform fibers in hybrid poplar are quite stable under compression. Douglas-fir latewood retained its original structure after compression and did not show any reduction in pore size. The results confirmed that the anatomical structure of VTC densified wood can be described by pore size distributions and mean pore sizes. However, in the case of broad or bimodal distributions, the mean pore sizes are of less significance.  相似文献   

5.
As a follow-up report, the pre-treatment by compression for wood drying was systematically studied in terms of the reduction of moisture content (MC), the recovery rate (RR), and mechanical properties of wood compressed at different MC conditions. The results showed that MC after compression on water-saturated wood determined the critical value of MC before compression which were about 84 and 105% at a compression ratio of 60 and 40% for Poplar and Chinese fir, respectively. Beyond the critical value, MC after compression remained constantly at about 84% and decreased slightly from 105% for Poplar and Chinese fir, respectively. The MC reduction decreased with the decrease of MC before compression. The MC reduction was rather effective when the MC before compression was higher than the critical value and was recommended to pre-treat for the effectiveness of MC reduction. In addition, after the recovery, the wood volume and mechanical properties were well retained for the wood compressed at all MC conditions which were above fiber saturation point (FSP) before and after compression. Therefore, the pre-treatment by compression is viable in terms of the RR and mechanical properties at rather broad MC conditions above FSP. Moreover, the compression force needed for treatment was almost same at these MC conditions.  相似文献   

6.
The drying kinetics of reaction woods in Picea abies (compression wood) and Fagus sylvatica (tension wood) in comparison with their corresponding normal woods was investigated under constant convective drying conditions. Moisture profiles along the thickness of small flat-sawn boards taken from reaction and opposite wood zones were evaluated using a polychromatic X-ray system, a non-destructive method. The results revealed substantial differences in the drying behavior between the reaction and opposite woods. Both reaction woods represented slower drying rate than their matching normal woods mainly during the period of free water loss. However, the reaction and opposite woods reached the final moisture content (MC) of about 12% at the same time due to higher initial MC in the opposite woods. In the case of reaction wood, it took a longer time for the moisture profile to become approximately uniform. Overall, a more striking difference was observed in the drying behavior of compression and opposite wood in P. abies. Some important anatomical differences like the cell and pit dimensions and their proportion give some explanations for these drying behaviors.  相似文献   

7.
Abstract

Compression creep experiments of hybrid poplar (Populus deltoides×Populus trichocarpa) were performed in a pressurized vessel equipped with a heated hydraulic press. The viscoelastic response at various stress levels (2–7 MPa), a temperature of 170°C and transient steam conditions was studied. Moisture content and oven-dry density of compressed specimens were determined. While some recovery of compression strain occurred, compression resulted in permanent deformation and increased wood density. The influence of stress level on the amount of set recovery of compressive deformation was evaluated after 24 h water soaking. Applied stress level had a significant effect on the compression deformation. The initial strain, as well as creep strain, varied depending on the applied stress level. The highest oven-dry density was obtained at a stress level of 6.9 MPa. Lower stress levels resulted in lower moisture content after the compression process, while the equilibrium moisture content of compressed specimens was not significantly affected by stress level. Set recovery increased from 20% to 65% with increased stress level from 1.7 MPa to 4.1 MPa, then decreased to 53% for specimens compressed at 6.9 MPa. Moisture content after the compression process significantly affected the set recovery.  相似文献   

8.
Wood samples of nine tropical hardwoods from Peru and sugar maple wood from Quebec were selected to perform moisture sorption tests associated with parallel-to-grain and tangential compression tests using a multiple step procedure at 25°C. Cold-water and hot-water extractives, sequential cyclohexane (CYC), acetone (ACE) and methanol (MET) extracts, ash content (ASH), wood density and interlocked grain (IG) were evaluated on matched samples too. Wood density corrected for the accessory substances was by far the major factor positively affecting the compressive properties of tropical hardwoods. The total amount of accessory substances is required in order to establish better relationships between physico–mechanical properties and density of tropical hardwoods. For a given wood density, the ultimate stress in parallel-to-grain compression was higher in tropical hardwoods than in temperate hardwoods. However, the compliance coefficients for both types of woods were quite similar. Sequential extraction with organic solvents was the most suitable method for evaluating the effect of extractives on compressive properties of tropical hardwoods. The CYC and ACE fractions did not contribute to variation in these mechanical properties. The substances dissolved in MET affected positively the compliance coefficient s 11 in parallel-to-grain compression and negatively the compliance coefficient s 33 in tangential compression. The IG decreased the compliance coefficient s 11 but also decreased the ultimate stress in parallel-to-grain compression. Finally, variations in compressive properties that were due to changes in equilibrium moisture content (EMC) were clearly influenced by wood density; denser woods were more sensitive to changes in EMC than lighter woods.  相似文献   

9.
陈成  程瑞香 《森林工程》2014,30(5):27-29
杨树是我国重要的速生林树种之一。为了充分利用杨树资源,提高速生杨木的品质,缓解我国目前木材的供需矛盾,迫切需要对杨木进行改性处理。论述速生杨木改性的研究进展,目前对速生杨木改性主要是从其材质松软、密度小、硬度低、易腐朽、尺寸稳定性差等天然缺陷出发,采取浸渍处理和非浸渍处理两大主要方式。浸渍改性包括采取有机物浸渍改性、无机物浸渍改性或二者联合浸渍改性。非浸渍改性包括与其它物质或材料复合改性,压密改性,热压改性,高温热处理改性、熏烟热处理改性、汽蒸改性,水热改性以及多种方法联合改性处理。研究表明,这些改性处理方式对杨木材性提高有显著作用,为杨木高附加值生产提供了重要依据。  相似文献   

10.
为考察杨木和辐射松树脂浸渍材的机械加工性能,参照LY/T 2054—2012《锯材机械加工性能评价方法》,分别对杨木和辐射松的素材与树脂浸渍材及其经过真空热处理的树脂浸渍材的刨削、铣削、钻削、开榫和车削5种机械加工性能进行测试评价。结果表明:1)本试验范围内,在综合评分满分40分情况下,杨木素材、树脂浸渍材和真空热处理树脂浸渍材的总评分分别为20分、30分和25分;辐射松素材、树脂浸渍材和真空热处理树脂浸渍材的总评分分别为24分、33分和29分;树脂浸渍材机械加工综合性能最佳,热处理树脂浸渍材次之;2)杨木和辐射松的树脂浸渍材及其真空热处理树脂浸渍材的刨削、铣削性能均为优秀,车削性能均为良好;杨木和辐射松的树脂浸渍材及辐射松真空热处理树脂材开榫性能良好;钻削性能仅辐射松树脂浸渍材达到优秀;3)辐射松素材与改性处理材的机械加工性能均优于杨木,综合比较,辐射松树脂浸渍材具有较佳的机械加工性能。  相似文献   

11.
In this paper, the compressive deformation of hybrid poplar wood (Populus deltoides?×?Populus trichocarpa) at high temperature (150, 160, and 170°C) and under various conditions of steam pressure was studied. Temperature and conditions of steam environment affected the relative density change and creep deformation during compression, as well as properties of the resulting densified material. While the temperature significantly affected the compression deformation of specimens compressed under transient and superheated steam conditions, temperature within the range studied had little effect on the compressive deformation in saturated steam. In all tested conditions, compression deformation was achieved without cell wall fractures. Higher temperature of compression, regardless of steam condition, resulted in lower equilibrium moisture content. In specimens compressed under saturated steam, the modulus of rupture (MOR) and modulus of elasticity (MOE) were increased proportionally to the increase in density, while the compression under superheated steam produced lower increase in the MOE and MOR than expected based on the increase in density. Compression in transient steam conditions at 170°C produced densified wood with higher MOE and MOR than expected based on the increase in density.  相似文献   

12.
Abstract

This state-of-the-art report presents the basic concepts of some of the thermo-hydro (TH) and thermo-hydro-mechanical (THM) wood processes that are in use today, i.e. heat treatment, compression of wood in the longitudinal or transverse direction and wood welding. The reasons for the growing interest in TH and THM techniques are discussed, and the development of the different concepts, from first ideas to current status, is briefly presented. The physical and chemical changes that occur in wood during TH and THM processing according to the latest research are also presented. Finally, developments that are close to or already have an industrial application are presented, and the challenges for further development of the heat treatment, compression and wood welding processes are discussed. The TH processing of wood is based entirely on water and heat, and a THM process incorporates an additional mechanical force. The purpose of wood transformation by a TH or a THM process is to improve the intrinsic wood properties, to acquire a form and functionality desired by engineers without changing its eco-friendly characteristics or hindering its further use in the total material life cycle. Only a few of the recently developed techniques, e.g. heat treatment, wood welding and various densification applications, have been industrialized to some extent. There are many reasons for this relatively low transfer of the research results to a full up-scaled industrial production. Some of them are related to unsolved problems at the laboratory level on small-sized samples and others are related to the scaling-up processes in industry. Furthermore, the ageing of heated wood leads to deterioration with time, in some cases there is an unpleasant odour, the strength of the wood decreases substantially and the wood becomes more brittle. These are new challenges which need to be resolved by the collaboration of researchers from the different scientific domains of academia, research institutes and industry.  相似文献   

13.
以厚皮深裂、厚皮浅裂、薄皮深裂与薄皮浅裂4种类型栓皮栎(Quercus variabilis)软木为材料,通过测定皮层厚度、密度、含水率、吸湿率、吸水率、硬度、抗压性和压缩回弹性等主要物理力学参数,对软木特性进行比较分析。结果表明,厚皮浅裂型软木的综合性能较优,皮层厚度为0.34 mm;密度为0.26 g/cm^3;含水率为4.91%;吸湿率为3.69%;吸水率为16.24%;硬度为63.42 HA;抗压指数(纵向为3.29 MPa,横向为2.44 MPa);24 h压缩回弹率(纵向为87.50%,横向为87.20%),更适于栓皮栎的培育及深加工利用。  相似文献   

14.
Hybrid poplar (Populus deltoides × Populus trichocarpa) and Douglas-fir (Pseudotsuga menziesii) wood specimens were densified with three variations of thermo-hydro-mechanical (THM) treatment. The THM treatments differed in the steam environment, including transient steam (TS), saturated steam (SS), and saturated steam with 1-min post–heat treatment at 200 °C (SS+PHT). The bending properties, FTIR spectra, and colour of the THM wood specimens were studied before and after exposure to two different wood decay fungi, brown rot Gloeophyllum trabeum, and white rot Trametes versicolor. The results showed that the performance of densified hybrid poplar wood was considerably poorer than the performance of Douglas-fir heartwood. The FTIR spectra measurements did not show changes in the densified hybrid poplar wood, while some changes were evident in densified Douglas-fir specimens. After fungal degradation, the most prominent changes were observed on the SS+PHT specimens. Colour is one of the most important parameter predominantly influenced by the wood species and the intensity of the densification process for both wood species, while after fungal exposure, the colour of all densified Douglas-fir specimens obtained more or less the same appearance, and densified hybrid poplar specimens resulted in lighter colour tones, indicating that the pattern of degradation of the densified and non-densified specimens are similar. The 3-point bending test results determined that the THM treatment significantly increased the modulus of rupture (MOR) and modulus of elasticity (MOE) of the densified wood specimens, while fungal exposure decreased the MOE and MOR in hybrid poplar and Douglas-fir specimens.  相似文献   

15.
人工林杉木和杨树木材物理力学性质的株内变异研究   总被引：4，自引：0，他引：4  
按照中国国家标准研究杉木和I-214杨树木材的抗弯弹性模量、抗弯强度、顺纹抗压强度和密度,同时按照日本国家标准研究2个树种的顺纹抗剪强度.结果表明:杉木的抗弯强度、顺纹抗压强度和密度由胸高直径处向上呈波浪形增加,抗弯弹性模量则稳定降低,但不同高度间杉木的物理力学性质没有显著差异;近树皮处木材的物理力学性质高于近髓心处木材,并有极显著差异.对于I-214杨树,只有抗弯弹性模量从髓心到树皮逐渐增加,其他的物理力学性质,最小值在从髓心到树皮的过渡区,最大值在近树皮处,从髓心到树皮,杨树的物理力学性质有极显著的差异.杉木和杨树的径面顺纹抗剪强度从髓心到树皮有极显著差异,并且近树皮的高于近髓心的木材,而弦面顺纹抗剪强度从髓心到树皮没有显著差异.木材密度与力学性质有很好的线性相关关系,木材密度是一个很好的力学强度的预测手段.  相似文献   

16.
The effects of molecular weight of PF resin on the deformation behaviour of NaClO2 treated resin-impregnated wood during compression were investigated. Blocks of Japanese cedar were subjected to 2% NaClO2 aqueous solution. This was repeated up to four times resulting in a weight loss of 28%. Treated and untreated samples were impregnated with PF resin having different molecular weight. With increasing molecular weight, weight gain and volume gain decreased for untreated PF resin-impregnated wood, while NaClO2 treated wood impregnated with high molecular weight PF resin showed almost double the weight gain compared to untreated condition. NaClO2 treatment has shown considerable potential for high compression of PF resin-impregnated wood at lower pressing pressure regardless of the molecular weight of the resin. Low to high molecular weight resin was shown to penetrate into NaClO2 treated wood as estimated by weight gain contributing to the plasticization of cell wall considerably and thus resulting in cell wall collapse at low pressing pressure. The density of NaClO2 treated wood impregnated with high molecular weight resin attained a value of over 0.8 g/cm3 which is close to the density of untreated wood impregnated with low molecular weight resin. Such compressed wood exhibited high dimensional stability after boiling for 3 h. Thus, the penetration of resin into wood contributes to highly compressed dimensional stable resin-impregnated wood at low pressing pressure.  相似文献   

17.
Heat treatment of Pinus pinaster and Eucalyptus globulus woods, two important species in Portugal, was performed in the absence of air by steaming, inside an autoclave, for 2–12 h at 190–210°C. Mass losses increased with treatment time and temperature reaching 7.3% for pine and 14.5% for eucalypt wood. The wood behaviour with moisture was improved. The equilibrium moisture content decreased by 46% for pine and 61% for eucalypt, the dimensional stability increased (maximum anti-shrinking efficiency in the radial direction of 57 and 90% for pine and eucalypt, respectively) and the surface wettability was lowered. In relation to mechanical properties, the modulus of elasticity was little affected (maximum decrease of 5% for pine and 15% for eucalypt) but the bending strength was reduced (by 40% at 8% mass loss for pine and 50% at 9% mass loss for eucalypt wood). The variation of properties was related to treatment intensity and mass loss but significant improvements could already be obtained for a 3–4% mass loss without impairing the mechanical resistance. The response of eucalypt was higher than that of pinewood. Heat treatment of eucalypt wood shows an interesting potential to improve the wood quality for solid timber products.  相似文献   

18.
本文对长江滩地这一特定立地条件下经过人为耕作与非耕作模式下的杨树木材物理力学性质及应力木分布情况与力学性质间的关系进行了比较研究。结果表明：林下耕作可提高杨树木材密度,与对照木相比,基本密度和气千密度差异性分别达显著与极显著水平;能够减少应拉木的产生,与对照木相比差异百分率达24．82％,进而使木材的差异干缩减小,木材尺寸稳定性提高;各项力学指标均优于对照杨树,且与应力木的量呈线性负相关,其中抗弯强度与抗弯弹性模量与其相关性显著。  相似文献   

19.
高性能重组木制造技术可将速生材制造成具有高强度和天然木材纹理结构的新型木材,从而提高速生材的附加值。然而,采用此技术制备的重组木虽然尺寸稳定性显著高于传统工艺制备的重组木,但是仍不能满足室外用材的需求。为提高室外用重组木的尺寸稳定性,采用预压缩处理施胶技术对木单板施胶后制备高性能重组木,通过扫描电镜、压汞仪、激光共聚焦显微镜和超景深显微镜,研究了预压缩处理施胶技术对木单板和重组木的形貌和胶液分布的影响,及其对重组木尺寸稳定性和力学性能的影响。研究结果表明:预压缩处理施胶技术增大了木单板的比表面积,使胶液在单板和重组木中分布更均匀,而且显著降低了重组木的吸水厚度膨胀率(TSR)和吸水宽度膨胀率(WSR)。在63℃/24 h的水煮测试中,TSR和WSR相比未处理材分别降低43.34%和12.82%;在28 h循环测试中,TSR和WSR相比未处理材分别降低50.94%和51.48%。因此,采用预压缩处理施胶技术制备的重组木尺寸稳定性相比未处理材显著提高。同时,重组木的静曲强度、弹性模量和剪切强度相比未处理材分别提高1.63%,12.15%和21.34%。  相似文献   

20.
白雪  杨永福  王天龙  秦学娴 《林产工业》2012,39(3):17-19,29
杨木是我国人工林培育的主要树种之一。为了加强对杨树木材的高效利用,改善杨木的渗透性,探究了常温下压缩空气微爆破处理中杨木试材初含水率、爆破压力和爆破次数对杨木渗透性的影响。结果表明,杨木木材试件经微爆破处理后,渗透性明显提高,初含水率和微爆破压力对杨木渗透性影响显著,微爆破处理的次数对杨木渗透性影响不显著。压缩空气微爆破处理对杨木力学性能影响不显著。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号