首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The aim of this study was to compare measurements of the medial and lateral claws of the hind feet in cattle, and to establish reference values to aid in functional claw trimming. Variables of the medial and lateral claws of 40 hind feet obtained from 40 slaughtered German Simmental cows were measured. To standardise the observations the soles of both the medial and lateral claws were first trimmed to a defined thickness of 5mm at the apex and 8mm at the heel, before measurements were taken. After this standardisation, the mean lengths of the dorsal walls of the two claws were not significantly different (means, lateral 76.8, medial 77.1 mm). However, there were considerable other differences. For example, the soles of the lateral claws were significantly (P < 0.01) longer (means, 120.1mm versus 112.7 mm, and wider (means, 52.0 mm versus 42.5 mm). In 36/40 feet, the sole of the lateral claw protruded approximately 2-3mm above the sole of the medial claw after the standardisation. The soles of the lateral claws were therefore then trimmed to the height of the medial claw ("levelling") and the measurements were repeated in the lateral claws. The dorsal wall of the lateral claw was then significantly shorter than that of the medial claw (means, 74.8 mm versus 77.1 mm) and, most importantly from a functional point of view, the sole was significantly thinner than that of the medial claw (means, 2.71 mm versus 5mm at the toe tip, 4.9mm versus 8 mm at the heel). Finally, the horn capsule of all claws was removed and various measurements of the corium surface were made. The length of the dorsal corium surface did not differ statistically (P > 0.05) between the lateral (mean, 62.6 mm) and medial (mean, 62.5 mm) claws. Strict adherence to the principles of functional trimming thus reduces the thickness of the sole, the length of the dorsal wall and the length and height of the bulb of the lateral claw. This suggests that the sole of the medial claw should be left an extra 3 mm thicker than previously recommended such that, after "levelling", the sole of the lateral claw remains thick enough to protect fully the corium and the claw retains a more normal shape.  相似文献   

2.
In 58 female calves of the three breeds German Holstein (GH), German Brown (GB) and German Red (GR) the body weight and height were determined at the age of 79 to 188 days. At the right front limb and the left hind limb the following claw measurements were taken: dorsal border length, diagonal length, heel length and height, angle of the dorsal border and hardness of the claw horn. Furthermore, the punctual pressure under the medial and the lateral claw of the right front limb and the left hind limb were determined using an electronic measuring system. The GH calves weighing 136.8 kg were heavier than GB, which was the tallest breed with 106.2 cm height at the sacral bone. GR calves were the smallest (99.1 cm) and weighed 121.1 kg. The length of the diagonal and the angle of the dorsal border were smaller at the hind limb of all breeds which resulted in a smaller area of ground surface for the claw of this limb. The GR calves had the longest and flattest claws. The GB showed the highest pressures per cm2 at the front limb with 25.6 N/cm2 under both claws as well as at the hind limb with 26.7 N/cm2. The AR had the smallest pressure load with 20.8 N/cm2 at the front limb and 20.2 N/cm2 at the hind limb. The animals showed a larger relative weight load and area of ground surface on the medial claws of the front and hind limbs than on the lateral claws. The highest pressures were found underneath the rear part of the medial claw in all breeds. GB calves showed the highest average pressures (33.3 N/cm2 at the front limb) while GR calves had the lowest (26.3 N/cm2 at the hind limb). GR calves had the highest claw hardness at all measuring positions.  相似文献   

3.
In 56 heifers of the three breeds German Holstein (GH), German Brown (GB) und German Red (GR) the body weight and height were determined at the age of 350 to 550 days in intervals of 6 to 8 weeks. At the right front limb and the left hind limb the claw measurements dorsal wall length, diagonal length, heel length and height, the angle of the dorsal wall and the hardness of the claw were taken. Furthermore, the punctual pressure under the medial and the lateral claw of the right front limb and the left hind limb were determined using an electronic measuring system. The GH heifers weighing 387.3 kg on an average and having a mean height of 132.3 cm at the sacral bone in the course of the present study were the heaviest and tallest breed at the age of 12 to 18 months. GB had a weight of 366.2 kg and 106.2 cm height at the sacral bone. The GR were the smallest breed (126.0 cm) and weighed 337.7 kg. The heel at the front limb was on the average 1 cm shorter than at the hind limb and it was 0.5 cm lower. The angle of the dorsal border was 4-5 degrees higher at the hind limb. The GR had the flattest claws. The animals showed a larger average weight load on the medial claws than on the lateral claws especially of the front limbs. The highest pressures per cm2 were found underneath the rear part of the medial claw in all breeds. At the front limb, the GB showed significantly higher average pressures per cm2 under the front sectors of the claws than GH and GR, while the other values did not differ significantly between the breeds. The GH tended to have lower average pressures per cm2 underneath the claws of the hind limb, but this was only significant at the front medial sector of the claw.  相似文献   

4.
OBJECTIVE: To determine whether ultrasound could be used to measure sole horn thickness in dairy cattle after claw trimming with an adaptation of the Dutch method. DESIGN: Case series. ANIMALS: 24 adult Holstein dairy cows. PROCEDURE: Cows were restrained in a standing position, and claws were trimmed with an adaptation of the Dutch trimming method. B-mode ultrasonography was then performed. The transducer was placed on the sole just caudal to the apex of the toe and immediately medial and parallel to the abaxial white zone. The inner margin of the sole was identified as a thin hyperechoic line. Soles were considered to be too thin if sole horn thickness, determined by use of ultrasonography, was < 5 mm. RESULTS: Sole horn, underlying soft tissues, and the distal surface of the third phalanx were imaged in 151 claws. The inner margin of the sole could not be identified in 4 claws, and 37 claws could not be imaged because cows collapsed in the restraining chute. Mean +/- SD sole thickness for all claws was 71 +/- 1.3 mm. Only 1 sole was < 5 mm thick. The lateral front claws were significantly thicker than the medial hind claws. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that ultrasound imaging can be used to determine sole thickness in dairy cattle after routine claw trimming.  相似文献   

5.
Measurements of both front feet of slaughtered German Simmental cattle (17 heifers, 13 cows) were carried out to document the normal shape and size of the forelimb claws and to gain information about function and possible predisposition to disease. Only clinically normal feet were examined, and a standardised sole thickness of 5mm at the tip and 8mm in the heel region in both claws was established as a reference. The dorsal wall length, dorsal wall angle, heel length, height and width, sole and claw length and claw width, sole circumference and sole area were measured. After removal of the horn capsules, measurements of values at the level of the corium were carried out. The lateral front claws were wider and the medial claws longer than their partner claws. Overall, the sole surface areas and circumferences of the paired claws were similar, but were statistically larger in the medial claws. The front claws were characterised by long and high heel bulbs, and had a toe length:heel bulb length ratio of approximately 1.6:1. These properties, together with the musculo-tendinous attachment of the limbs to the trunk, are believed to provide better protection for the forelimb claws when standing or walking on hard surfaces. Functional mechanical relief of the medial front claws is probably best achieved by pairing the soles of the foot to the same level, which usually entails reduction of the lateral claw. For German Simmental cattle, a dorsal wall length of 75mm can be used as a guideline when trimming front and hind feet.  相似文献   

6.
There are a number of differences between the claws of the front and hind limbs in cattle concerning macroscopic shape, chemical and physical properties of claw horn and epidemiological data. Front claws have superior data in almost every respect. Virtually no information is available on the mechanical stability of the suspensory apparatus of the third phalanx. It was the objective of this study to develop a method to measure the maximum strength (N/mm2) of the suspensory apparatus of the bovine distal phalanx. This apparatus includes all layers of tissue such as bone, corium, corioepidermal junction and wall horn. The feet of 13 clinically healthy beef bulls were collected from the local abattoir. Testing was performed in three locations of the wall segment (dorsal, abaxial, axial) in a material testing machine. The corium and the corioepidermal junction were set under increasing tension until failure occurred. Maximum stress was recorded. The values ranged between 2.47-3.13 N/mm2 (dorsal), 4.08-4.87 N/mm2 (abaxial) and 2.27-2.66 N/mm2 (axial). No differences could be validated statistically between front and hind claws and between lateral and medial claws respectively. Abaxial ultimate stress values were significantly higher than dorsal and axial ones. Between the two a statistical difference could not be validated. Most of the specimens (57.1%) were torn apart at the corioepidermal junction, almost a quarter of the samples (27.6%) were to a degree disrupted at the corioepidermal junction and to a certain extent in the deeper layers of the corium. A few samples showed disruption within the horn (11.5%) or at the attachment of the third phalanx (3.8%). Biomechanical features of the experimental set-up are discussed. The biological significance of these findings is that the body weight and the additional dynamic loading is predominantly taken over by the abaxial part of the claw, while the dorsal and axial aspects are less loaded.  相似文献   

7.
We investigated the associations of hind limb claw lesions with claw measures and reproductive performance of sows on a commercial breeding farm. We used a five‐point scale (score of 0–4) for each hind limb claw region to generate a claw lesion score (CLS). Of 110 sows, 1.8% had no hind claw lesions, and the remaining 98.2% had at least one. The proportions of sows with a CLS of 2 and 3 were 49.1% and 3.6%, respectively. The junction region had the highest frequency of a CLS of ≥ 2 (P < 0.05). The mean toe length was 45.0 ± 0.4 to 46.4 ± 0.4 mm. Sows with the highest CLS of ≥ 2 in the lateral claw had longer sole dimensions than did sows with the highest CLS of ≤ 1 (P < 0.05). There were no significant differences in claw width or height between sows with the highest CLS of ≥ 2 and ≤ 1. There was also no difference in reproductive performance between sows with the highest CLS of ≥ 2 and ≤ 1. In conclusion, most sows had hind claw lesions. The association between CLS and claw measures indicates that the sole length can be used as an indicator of claw lesions.  相似文献   

8.
Ultrasonographic imaging and thickness measurements of sole horn and underlying soft tissue layer were evaluated in 100 bovine claw specimens. The claws were trimmed and examined in longitudinal planes using a 7.5 MHz linear transducer. The sole horn, underlying soft tissue layer and distal surface of the distal phalanx of all claws were clearly visualized. The sole horn had a heterogeneous hypoechoic appearance; the underlying soft tissue layer was predominantly anechoic. Corium and subcutis could be differentiated. The best imaging of these structures was achieved in claws with less than 10 mm sole horn thickness and soft sole horn. Imaging of the dorsal wall structures was more difficult. In each claw, B- and A-mode measurements of horn thickness of sole and dorsal wall and distance from outer claw surface to distal phalanx surface were made at three marked points on the weightbearing surface and at one point on the dorsal wall. In 10 claws, CT-images were taken and the horn density was determined. All claws were then frozen, transected and anatomical reference measurements were made after thawing. Statistical correlation coefficients of 0.88 and higher were found for B-mode ultrasonographic and anatomical measurements of sole horn thickness. A-mode proved not to be useful for the sole horn thickness measurement. B-mode ultrasonography was carried out successfully in the claws of five living cattle.  相似文献   

9.
Ultrasonographic thickness measurement and imaging of sole horn and the encapsulated soft tissue layers was evaluated in 100 bovine claw specimens. The claws were trimmed and examined in longitudinal planes using a 7.5 MHz linear transducer. In each claw, ultrasonographic measurements of horn thickness of sole and distance from outer claw surface to distal phalanx surface were made at three marked points on the weightbearing surface. All claws were then frozen, transected and anatomical reference measurements were made after thawing. The sole horn, corium, subcutis and distal surface of the distal phalanx of all claws were clearly visualized. The sole horn had a heterogeneous hypoechoic appearance, the underlying soft tissue layer was predominantly anechoic. Corium and subcutis could be differentiated. Best imaging of these structures was achieved in claws with less than 10 mm sole horn thickness and soft sole horn. Statistical correlation coefficients of 0.88 to 0.91 were found for ultrasonographic and anatomical measurements of sole horn thickness. Therefore, B-mode ultrasonography proved to be an accurate, non-invasive technique for measurement of the sole horn thickness in bovine claws.  相似文献   

10.
AIM: To create a computer-based finite element (FE) model of the bovine claw and to use finite element analysis (FEA) to estimate stress and deformation of a physiologically-shaped model claw under static load, to visualise potential material weakness and to evaluate the effect of different flooring conditions. METHODS: Model geometry was derived using digitalised images from a recently trimmed, sound, hind claw from a 4-year-old Austrian Fleckvieh cow. Material properties of bovine claw horn were defined from preliminary investigations and recently established material data, using a modulus of elasticity from 200 to 600 N/mm2. Meshing of the model was performed with 42,127 elements based on 116,141 nodes. Loading of the model was defined at 756 N per claw on a hard and soft surface. RESULTS: The FE model of the bovine claw under a load of 756 N showed only minimal deformation, most of which took place at the axial wall. Highest stresses were evident in the proximal axial wall, the outer edge of the weight-bearing surface and under the heels. The claw-floor contact image showed a pressure distribution resembling the distal rim of the claw wall. On the hard surface, the maximum stresses were three times higher than those on the soft surface. CONCLUSIONS AND CLINICAL RELEVANCE: FEA allowed visualisation of the effects that loading on different floor surfaces have on the biomechanics of the claw. Uneven preparation of the claw sole resulted in high stresses at and close to irregularities of the sole. Consequences were more severe on harder flooring. The model supports the hypothesis that mechanical factors play a substantial role in the pathogenesis of claw lesions.  相似文献   

11.
Measurements were taken in the metacarpal and metatarsal bones in 42 calves and 10 dairy cows post-mortem to determine whether there are anatomical differences in bone length. Manual and digital measurements of various bone length parameters were taken. There was a significant difference in the mean length of the condyles of the metacarpal and the metatarsal bones in calves and cows, the lateral condyle being longer than the medial. In all but one metatarsal bone (98.8%), the lateral condyle was longer than the medial. In the metacarpal bones, the lateral condyle was longer in only 52.4% of the bones, in 21.2%, they had the same length and in 27.4% the medial condyle was longer. These intrinsic anatomical differences can help distinguish between the left and right metacarpal and metatarsal bones, for instance, in anatomical and archaeological studies. Knowledge of these differences might be useful for studies on digit function and on the possible predisposition of cattle to claw diseases in the lateral claws of the hind limbs.  相似文献   

12.
Claw disorders cause problems in dairy cattle all over the world. Nutrition, feeding, environment, claw trimming routines, hormonal changes related to calving and genetics are among the factors which influence the pathogenesis. The colour of the claw horn (pigmentation) has been suggested to play a role. The aim of this study was to investigate if there were any associations between the colour of the sole horn and claw disorders detected at claw trimming. Altogether, 2607 cows on 112 farms were claw trimmed once and the colour (dark, mixed or light) of the right lateral hind claw and hind claw disorders were recorded by 13 trained claw trimmers. The data were analysed using logistic regression models with logit link function, binomial distribution and herd and claw trimmer as repeated effects, with herd nested within claw trimmer. Haemorrhages of the sole (HS) and white line (HWL) were more frequently found in light than in dark claws (OR = 2.61 and 2.34, respectively). Both HS (OR = 1.43) and corkscrewed claws (OR = 1.84) were slightly more prevalent among cows which had claws with mixed colour versus dark claws. There were no significant associations of other claw disorders with claw horn colour.  相似文献   

13.
The lengths of the digital bones of the fore- and hind-limbs obtained post mortem from 40 cattle of different ages were measured using digital radiographs. The lengths of the individual digital bones and the overall length of the digit were determined using computer software. The lateral metacarpal/metatarsal condyle, and lateral P1 and P2 were significantly longer than their medial counterparts, whereas P3 of the medial digit was longer than its lateral partner. Measured from the cannon bone epiphysis to the tip of the pedal bone, the mean increased length of the lateral digit was 0.8 mm in the fore- and 1.5 mm in the hind-limb. When the lengths of the digital bones were summed, the mean length of the lateral digit was 1.8 mm longer in the fore-limb and 2.1 mm longer in the hind-limb. Based on these findings, it can be concluded that the lengths of the paired digits differ in cattle. The majority of cattle have longer lateral digits in the fore- and hind-limbs. This asymmetry might explain why the lateral hind-limb claws are predisposed to sole ulcers on hard surfaces. In the hind-limbs, the impact is transferred from the pelvis directly to the longer lateral digit. In the fore-limb claws, the tenomuscular attachment to the trunk may be involved in a more even weight distribution and in a shift of weight to the medial claw.  相似文献   

14.
The objective of this study was to investigate the influence of orally administered biotin on the healing of uncomplicated sole ulcers in dairy cattle. In a double-blind controlled study, 24 dairy cows with a mild, uncomplicated sole ulcer on a lateral hind claw were given either 40 mg biotin per day or a placebo feed over a period of 50 days. An orthopaedic shoe was fitted to the medial claw of the affected foot. The healing process was assessed clinically and by histological examination of horn samples. In the biotin-treated animals, the newly formed epidermis covering the sole ulcers was found to be of significantly better histological quality after 50 days than at the start of the study. The significant improvement in histological horn quality found in the biotin-treated animals suggests that biotin exerts a positive influence on the healing of sole ulcers, however the study period of 50 days appears to have been too short to permit macroscopic detection of the improvement in horn quality.  相似文献   

15.
Frozen heads of 9 clinically normal dogs were irradiated with orthovoltage x-rays. Surface doses and nasal cavity depth doses were measured, and the percentage of surface dose (depth dose) was calculated at random depths from the dorsal cutaneous surface in transverse planes through the medial and lateral canthi. Depth dose of 2 orthovoltage x-ray beams having half-value layers of 1.5 mm of Cu (96 keV) and 2.6 mm of Cu (134 keV) were compared with and found to resemble that reported in depth dose tables based on soft tissue equivalent material. Any differences (identified graphically) in depth dose, compared with that described using a uniform (soft tissue equivalent) phantom, were explained by the variations in tissue composition and the presence of air within the normal nasal and paranasal cavities.  相似文献   

16.
AIM: To create a computer-based finite element (FE) model of the bovine claw and to use finite element analysis (FEA) to estimate stress and deformation of a physiologically-shaped model claw under static load, to visualise potential material weakness and to evaluate the effect of different flooring conditions.

METHODS: Model geometry was derived using digitalised images from a recently trimmed, sound, hind claw from a 4-year-old Austrian Fleckvieh cow. Material properties of bovine claw horn were defined from preliminary investigations and recently established material data, using a modulus of elasticity from 200 to 600 N/mm2 . Meshing of the model was performed with 42,127 elements based on 116,141 nodes. Loading of the model was defined at 756 N per claw on a hard and soft surface.

RESULTS: The FE model of the bovine claw under a load of 756 N showed only minimal deformation, most of which took place at the axial wall. Highest stresses were evident in the proximal axial wall, the outer edge of the weight-bearing surface and under the heels. The claw-floor contact image showed a pressure distribution resembling the distal rim of the claw wall. On the hard surface, the maximum stresses were three times higher than those on the soft surface.

CONCLUSIONS AND CLINICAL RELEVANCE: FEA allowed visualisation of the effects that loading on different floor surfaces have on the biomechanics of the claw. Uneven preparation of the claw sole resulted in high stresses at and close to irregularities of the sole. Consequences were more severe on harder flooring. The model supports the hypothesis that mechanical factors play a substantial role in the pathogenesis of claw lesions.  相似文献   

17.
OBJECTIVE: To develop a dorsolateral approach to the centrodistal (distal intertarsal) joint in horses and compare its success rate with that of the traditional medial approach in that joint. SAMPLE POPULATION: 25 cadaveric equine hind limbs, ultrasonographic images, and radiographic views of the tarsal region of 5 and 59 healthy horses, respectively, and 22 horses with a clinical indication for centrodistal joint centesis. PROCEDURES: The dorsolateral approach was established anatomically (3 cadaveric limbs), ultrasonographically (5 horses), and radiographically (59 horses). Centrodistal joint arthrocentesis was performed in 22 cadaveric hind limbs and 22 horses; the number of needle repositionings required for procedure completion via the medial (in vitro) and the dorsolateral approach (in vitro and in vivo) was determined. RESULTS: For the dorsolateral approach to the centrodistal joint, the injection site was 2 to 3 mm lateral to the long digital extensor tendon and 6 to 8 mm proximal to a line drawn perpendicular to the axis of the third metatarsal bone through the proximal end of the fourth metatarsal bone. The needle was directed plantaromedially (angle of approx 70 degrees from the sagittal plane). The number of needle repositionings required to complete centrodistal joint centesis via the dorsolateral and medial approaches was not significantly different. CONCLUSION AND CLINICAL RELEVANCE: In a clinical setting, the dorsolateral approach to the centrodistal joint in horses appears to have some advantages over the traditional medial approach. The success rate of arthrocentesis was similar via either approach, and palpation of the anatomic landmarks was easy.  相似文献   

18.
The 12 left digits of the thoracic limb of Holstein female cows were obtained from a slaughterhouse, and 13 linear measurements of skeletal specimens of the digits of the thoracic limb were used in this study. Bivariate plots, regressions and correlation analyses were performed to assess the relationships between osteometric data and age, and between osteometric data and body size. The geometric mean (GM) of the metacarpal size was used as a proxy of body weight. The results of the regression analysis demonstrated that the length and the width of the distal phalanx were significantly correlated with age, whereas those of other bones were not. In addition, the correlations of the distal phalanx tended to be higher with age than with the GM of the metacarpal size, and their skeletal measurements tended to be longer in older animals than in younger animals. These findings suggest that the distal phalanx is slightly elongated and enlarged in its solear aspect with increasing age in skeletally mature cows. Moreover, although the side difference in the distal phalanx between the lateral and medial digits did not increase significantly with age, the solear aspect of the distal phalanx tended to be rougher, and deformation of the flexor tubercle tended to be more pronounced in the medial digit compared with the lateral digit. Therefore, in the distal phalanx of the front feet, the skeletal deformation with age and asymmetrical bone development might be related to the pathogenesis of claw horn lesions, as in the hind feet.  相似文献   

19.
Hind claws of 15 adult, sound Fleckvieh cows were used for material analysis. The elastic modulus was tested in tension tests according to EN ISO 527 and ASTM D 638-03 at a universal material testing machine. Samples were taken from different segments of the bovine claw to find the differences in material properties. Samples orientation was parallel to the horn tubules and transversal, respectively. Dry matter of the test samples was determined at the time of testing. Elastic modulus values were highest with mean = 659.7 N/mm2 at the dorsal wall. Values dropped axial to 416.3 N/mm2, abaxial to 343.9 N/mm2 for longitudinal (parallel) samples and to 433.1 N/mm2 for transversal samples. The elastic modulus of the sole segment was found to be 172.1 N/mm2. No difference was calculated neither between right and left feet, lateral and medial claws, nor between longitudinal and transversal samples.  相似文献   

20.
A 4-year-old beefmaster cow was examined for a left hind leg lateral claw lameness due to septic arthritis of the distal interphalangeal joint and associated osteomyelitis of the second and third phalanges. Actinomyces pyogenes and Fusobacterium necrophorum, which have been demonstrated previously to act synergistically in ovine heel abscesses, were isolated from the affected digit. A claw amputation was performed because of the advanced destructive nature of the lesion.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号