首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Quantum structures made from epitaxial semiconductor layers have revolutionized our understanding of low-dimensional systems and are used for ultrafast transistors, semiconductor lasers, and detectors. Strain induced by different lattice parameters and thermal properties offers additional degrees of freedom for tailoring materials, but often at the expense of dislocation generation, wafer bowing, and cracks. We eliminated these drawbacks by fast, low-temperature epitaxial growth of Ge and SiGe crystals onto micrometer-scale tall pillars etched into Si(001) substrates. Faceted crystals were shown to be strain- and defect-free by x-ray diffraction, electron microscopy, and defect etching. They formed space-filling arrays up to tens of micrometers in height by a mechanism of self-limited lateral growth. The mechanism is explained by reduced surface diffusion and flux shielding by nearest-neighbor crystals.  相似文献   

2.
Time-resolved lattice spacing changes were measured (10-millisecond time resolution) by x-ray diffraction of synchrotron radiation in single intact muscle fibers of the frog Rana temporaria undergoing electrically stimulated tension development during application of stretches and releases. Ramp releases, which decreased fiber length at constant speed, caused a lattice expansion. After the ramp, increasing tension during recovery was accompanied by lattice compression. Ramp stretches caused a compression of the lattice. While the fiber was held at a constant length after the stretch, tension decreased and lattice spacing increased. These observations demonstrate the existence of a previously undetected radial component of the force generated by a cycling crossbridge. At sarcomere lengths of 2.05 to 2.2 micrometers, the radial force compresses the myofilament lattice. Hence, the myofilament lattice does not maintain a constant volume during changes in force.  相似文献   

3.
We achieved automated optical control over coherent lattice responses that were both time- and position-dependent across macroscopic length scales. In our experiments, spatiotemporal femtosecond pulse shaping was used to generate excitation light fields that were directed toward distinct regions of crystalline samples, producing terahertz-frequency lattice vibrational waves that emanated outward from their multiple origins at lightlike speeds. Interferences among the waves resulted in fully specified far-field responses, including tilted, focusing, or amplified wavefronts. Generation and coherent amplification of terahertz traveling waves and terahertz phased-array generation also were demonstrated.  相似文献   

4.
Terahertz magnetic response from artificial materials   总被引:1,自引:0,他引:1  
We show that magnetic response at terahertz frequencies can be achieved in a planar structure composed of nonmagnetic conductive resonant elements. The effect is realized over a large bandwidth and can be tuned throughout the terahertz frequency regime by scaling the dimensions of the structure. We suggest that artificial magnetic structures, or hybrid structures that combine natural and artificial magnetic materials, can play a key role in terahertz devices.  相似文献   

5.
A newly discovered population of organic walled microstructures from the Swaziland System, South Africa, is considered to be biological on the following grounds: (i) the structures are carbonaceous and occasionally have internal organic contents; (ii) the population has a narrow unimodal size frequency distribution (average diameter, 2.5 micrometers; range, 1 to 4 micrometers); (iii) the structures are not strictly spherical, but are commonly flattened and folded like younger microfossils; (iv) the sedimentary context is consistent with biogenic origins; and (v) various stages of binary division are clearly preserved.  相似文献   

6.
Evidence of structural inhomogeneities in two high-transition-temperature superconductors, YBa(2)Cu(3)O(7-delta) and Nd2-xCexCuO4-y, is presented. When samples were illuminated by highly collimated x-rays produced on a synchrotron wiggler, small changes in the lattice were detected over a spatial scale of 10 micrometers. These changes are interpreted as evidence of variations in the oxygen content in one case and in the cerium content in the other; both affect the superconducting properties. The existence of such structural inhomogeneities brings into question whether exotic experimental results obtained from superconducting materials with high transition temperatures actually reflect intrinsic properties.  相似文献   

7.
Amorphous boron nitride, BN, is obtained from the reaction of B-trichloroborazine, (BCINH)(3), with cesium metal. The amorphous product is converted to a turbostratic form upon heating to 1100 degrees C. Scanning electron microscopy reveals a previously unreported morphology composed of hollow tubular structures. The largest of these appear to be approximately 3 micrometers in external diameter and 50 to 100 micrometers in length. Transmission electron microscopy and selected-area electron diffraction also indicate the tube walls to be turbostratic in nature. The mechanism by which the tubes form is not known, although apparent sites of incipient tube growth have been observed.  相似文献   

8.
Ordered mesostructured porous silicas that are also macroscopically structured were created by control of the interface on two different length scales simultaneously. Micellar arrays controlled the nanometer-scale assembly, and at the static boundary between an aqueous phase and an organic phase, control was achieved on the micrometer to centimeter scale. Acid-prepared mesostructures of silica were made with the p6, Pm3n, and the P63/mmc structures in the form of porous fibers 50 to 1000 micrometers in length, hollow spheres with diameters of 1 to 100 micrometers, and thin sheets up to 10 centimeters in diameter and about 10 to 500 micrometers in thickness. These results might have implications for technical applications, such as slow drug-release systems or membranes, and in biomineralization, where many processes are also interface-controlled.  相似文献   

9.
Silicate grains from Tranquillity Base have shock-induced features ranging from internal fragmentation through complete disruption of the lattice to thermal melting. Half the crystalline grains with diameters less than 125 micrometers have features of shock equivalent to those produced in the laboratory at pressures greater than about 40 kilobars. One quarter have features indicative of pressures greater than 90 kilobars. These properties together with great quantities of melt glass and aluminum-26 in the fine-grained material are indicative of repeated shock-loading by meteoritic bombardment over long periods of time.  相似文献   

10.
Thin sections (500 to 1000 angstroms thick) of individual micrometeorites (5 to 15 micrometers) have been prepared with an ultramicrotome equipped with a diamond knife. Electron microscopic examination of these sections has revealed the internal structures of chondritic micrometeorites, and a subset of highly porous, fragile particles has been identified. Delicate meteoritic materials such as these are characteristic of debris from cometary meteors.  相似文献   

11.
Conducting polymers are excellent materials for actuators that are operated in aqueous media. Microactuators based on polypyrrole-gold bilayers enable large movement of structures attached to these actuators and are of particular interest for the manipulation of biological objects, such as single cells. A fabrication method for creating individually addressable and controllable polypyrrole-gold microactuators was developed. With these individually controlled microactuators, a micrometer-size manipulator, or microrobotic arm, was fabricated. This microrobotic arm can pick up, lift, move, and place micrometer-size objects within an area of about 250 micrometers by 100 micrometers, making the microrobot an excellent tool for single-cell manipulation.  相似文献   

12.
Porous silica, niobia, and titania with three-dimensional structures patterned over multiple length scales were prepared by combining micromolding, polystyrene sphere templating, and cooperative assembly of inorganic sol-gel species with amphiphilic triblock copolymers. The resulting materials show hierarchical ordering over several discrete and tunable length scales ranging from 10 nanometers to several micrometers. The respective ordered structures can be independently modified by choosing different mold patterns, latex spheres, and block copolymers. The examples presented demonstrate the compositional and structural diversities that are possible with this simple approach.  相似文献   

13.
木质素的测定方法研究进展   总被引:9,自引:0,他引:9  
对木质素的制备、总量的测定及其结构和分子量的测定等进行了综述,并分析了这些测定方法存在的问题,指出了将太赫兹技术应用于木质素测定的前景.  相似文献   

14.
Two images of Cassiopeia A obtained at 24 micrometers with the Spitzer Space Telescope over a 1-year time interval show moving structures outside the shell of the supernova remnant to a distance of more than 20 arc minutes. Individual features exhibit apparent motions of 10 to 20 arc seconds per year, independently confirmed by near-infrared observations. The observed tangential velocities are at roughly the speed of light. It is likely that the moving structures are infrared echoes, in which interstellar dust is heated by the explosion and by flares from the compact object near the center of the remnant.  相似文献   

15.
Investigations of phase-separated Langmuir-Blodgett films by atomic force microscopy reveal that on a scale of 30 to 200 micrometers, these images resemble those observed by fluorescence microscopy. Fine structures (less than 1 micrometer) within the stearic acid domains were observed, which cannot be seen by conventional optical microscopic techniques. By applying the force modulation technique, it was found that the elastic properties of the domains in the liquid condensed phase and grains observed within the liquid expanded phase were comparable. Small soft residues in the domains could also be detected. The influence of trace amounts of a fluorescence dye on the micromorphology of monolayers could be detected on transferred films.  相似文献   

16.
The manufacture of high-performance, conjugated polymer transistor circuits on flexible plastic substrates requires patterning techniques that are capable of defining critical features with submicrometer resolution. We used solid-state embossing to produce polymer field-effect transistors with submicrometer critical features in planar and vertical configurations. Embossing is used for the controlled microcutting of vertical sidewalls into polymer multilayer structures without smearing. Vertical-channel polymer field-effect transistors on flexible poly(ethylene terephthalate) substrates were fabricated, in which the critical channel length of 0.7 to 0.9 micrometers was defined by the thickness of a spin-coated insulator layer. Gate electrodes were self-aligned to minimize overlap capacitance by inkjet printing that used the embossed grooves to define a surface-energy pattern.  相似文献   

17.
Spectroscopic measurements of the thermal radiation from Jupiter between 12 and 24 micrometers (420 to 840 reciprocal centimeters) with a resolution of 4 reciprocal centimeters are used to infer the Jovian temperature structure in the pressure region 0.1 to 0.4 atmosphere. The brightness temperature spectrum is in good agreement with previous ground-based measurements between 11 and 13 micrometers and with airborne measurements between 18 and 25 micrometers. However, the integrated flux calculated for a filter window and viewing angle equivalent to those of the 20 micrometer channel of Pioneer 10 is 20 percent below that measured by the Pioneer infrared radiometer. The Q branch of the v(5) fundamental band of acetylene at 730 reciprocal centimeters appears in emission and leads to a mixing ratio estimate of 10(-6 +/- 0.5).  相似文献   

18.
带边桁架单层柱面正交异型网壳的静力特性分析   总被引:7,自引:4,他引:3  
单层柱面正交异型网壳是一种新型的网壳形式,利用空间杆系有限元法,针对采用边桁架支撑的单层柱面正交异型网壳,进行内力计算,分析其在不同边界约束条件下的静力特性,并与采用拱形圈梁支撑下的网壳进行比较,为结构造型及工程设计提供依据。  相似文献   

19.
20.
Columnar defects generated by heavy-ion irradiation are promising structures for pinning magnetic flux lines and enhancing critical currents in superconductors with high transition temperatures. An approach that combines chemical etching and magnetic decoration was used to highlight simultaneously the distributions of columnar defects and magnetic flux lines in Bi(2)Sr(2)CaCu(2)O(8) superconductors. Analyses of images of the columnar defects and flux-line positions provide insight into flux-line pinning by elucidating (i) the occupancy of columnar defects by flux lines, (ii) the nature of topological defects in the flux-line lattice, and (iii) the translational and orientational order in this lattice.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号