首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The aim of this work was to study the effects of extrusion barrel temperature (75–140°C) and feed moisture (16–30%) on the production of third‐generation snacks expanded by microwave heating. A blend of potato starch (50%), quality protein maize (QPM) (35%), and soybean meal (SM) (15%) was used in the preparation of the snacks. A laboratory single extruder with a 1.5 × 20.0 × 100 mm die‐nozzle and a central composite routable experimental design were used. Expansion index (EI) and bulk density (BD) were measured in expanded pellets, viscosity at 83°C (V83), thermal properties, and relative crystallinity were measured in extruded pellets. EI increased and BD decreased when the barrel temperature was increased, while the feed moisture effect was not significant. V83 increased when feed moisture increased. Extrusion modified the crystalline structures of the pellets and the X‐ray data suggests the formation of new structures, probably due to the development of amylose‐lipid complexes. The maximum expansion of pellets was found at barrel temperatures of 123–140°C, and feed moisture of 24.5–30%. It is possible to obtain a functional third‐generation snack with good expansion characteristics using a microwave oven, and this snack has health benefits due to the addition of QPM and SM.  相似文献   

2.
We have modeled a rice extrusion process focusing specifically on the starch gelatinization and water solubility index (WSI) as a function of extrusion system and process parameters. Using a twin‐screw extruder, we examined in detail the effect of screw speed (350–580 rpm), barrel temperature, different screw configurations, and moisture content of rice flour on both extrusion system parameters (product temperature, specific mechanical energy [SME], and residence time distribution [RTD]) and extrudate characteristics (expansion, density, WSI, and water absorption index [WAI]). Changes in WSI were monitored to reveal a relationship between the reaction kinetics during extrusion and WSI. Reaction kinetics models were developed to predict WSI during extrusion. WSI followed a pseudo first‐order reaction kinetics model. It became apparent that the rate constant is a function of both temperature and SME. We have developed an adaptation of the kinetic model based on the Arrhenius equation that shows better correlations with SME and distinguishes data from different screw configurations. This adaptation of the model improved predictability of WSI, thereby linking the extrusion conditions with the extruded product properties.  相似文献   

3.
Wheat flour with 0.3% (w/w) thiamin was extruded on a twin‐screw laboratory‐scale extruder (19‐mm barrel) at lower temperatures and expanded using carbon dioxide (CO2) gas at 150 psi. Extrusion conditions were die temperature of 80°C and screw speed range of 300–400 rpm. Control samples were extruded at a die temperature of 150°C and screw speed range of 200–300 rpm. Dough moisture content was 22% in control samples and 22 and 25% in CO2 samples. Expansion ratio, bulk density, WAI, and %WSI were compared between control and treatment. CO2 injection did not significantly increase expansion ratio. Bulk densities in the CO2 extruded samples decreased when feed moisture decreased from 25 to 22%. The products using CO2 had lower WAI values than products puffed without CO2 at higher temperatures. The mean residence time was longer in CO2 screw configurations than in conventional screw configurations. Thiamin losses were 10–16% in the control samples. With CO2, thiamin losses were 3–11% at 22% feed moisture, compared with losses of 24–34% at 25% moisture. Unlike typical high‐temperature extrusion, thiamin loss in the low‐temperature samples decreased with increasing screw speed. Results indicate that thiamin loss at lower extrusion temperatures with CO2 injection is highly dependent on moisture content.  相似文献   

4.
Corn distillers' dried grains with solubles (DDGS) was extruded with corn meal in a pilot plant single‐screw extruder at different extruder die temperatures (100, 120, and 150°C), levels of DDGS (0, 10, 20, and 30%) and initial moisture contents (11, 15, and 20% wb). In general, there was a decrease in water absorption index (WAI), water solubility index (WSI), radial expansion, and L* value with an increase in DDGS level, whereas a* value and bulk density increased. Increase in extruder die temperature resulted in an increase in WSI and WAI but a decrease in L* and bulk density. Peak load was highest at 30% DDGS as compared with 0, 10, and 20% DDGS extrudates. Die temperature of 120°C and initial moisture content of 20% resulted in least peak load. The a* value remained unaffected by changes in extruder die temperature. Radial expansion was highest at extruder die temperature of 120°C. Maximum WAI, WSI, radial expansion, and L* value were obtained at 15% initial moisture content. An increase in initial moisture content, in general, decreased L* value and bulk density but increased a* value of extrudates.  相似文献   

5.
Grains of two regular and two waxy barley cultivars were milled into break and reduction stream flours using a wheat milling mill, granulated to facilitate feeding and flow through the barrel, and extruded to form expanded products using a modified laboratory single‐screw extruder. As moisture content of barley granules decreased from 21 to 17%, the expansion index of extrudates increased from 1.81 to 2.68, while apparent modulus of compression work (AMCW) decreased from 17.1 × 104 to 7.8 × 104 N/m2. Break stream flours of both regular and waxy barley produced extrudates with higher expansion index (2.72–3.02), higher water absorption index (WAI), and lower AMCW than extrudates from reduction stream flours. Extrudates produced from regular barley had generally higher expansion and lower density than those produced from waxy barley. The specific mechanical energy (SME) was greater during extrusion of regular than of waxy barley. Barrel temperatures of 130, 150, and 170°C for the feeding, compression, and metering sections, respectively, resulted in higher SME, higher expansion index, lower water absorption index and lower AMCW of extrudates compared with a constant extruder barrel temperature of 160°C. Increased screw speed generally resulted in larger expansion index and increased WAI of extrudates. With increased feed rate from 89 to 96 g/min, the expansion index of extrudates decreased from 3.20 to 2.78 in regular barley and 3.23 to 2.72 in waxy barley, and harder extrudates were produced.  相似文献   

6.
Extrusion trials were conducted with varying levels of distillers dried grains with solubles (DDGS) along with soy flour, corn flour, fish meal, vitamin mix, mineral mix, and net protein content adjusted to 28% using a Wenger TX-52 twin-screw extruder. The properties of extrudates were studied in experiments conducted using a full-factorial design with three levels of DDGS content, two levels of moisture content, and two levels of screw speed. Increasing the DDGS content from 20 to 60% resulted in a 36.7% decrease in the radial expansion, leading to a 159 and 61.4% increase in the unit density and bulk density of the extrudates, respectively. Increasing the DDGS content resulted in a significant increase in the water absorption index (WAI) but a significant decrease in the water solubility index (WSI) of the extrudates. Changing the screw speed and moisture content had no significant effect on the radial expansion ratio but resulted in a significant difference in the bulk density of the extrudates, which may be due to the occurrence of longitudinal expansion. Even though changing the moisture content and screw speed had no significant effect on the WSI of the extrudates, significant differences in the WAI of the extrudates were observed. The ingredient components in the blend and moisture content had an influence on the color changes of the extrudates, as did the biochemical changes occurring inside the barrel during processing. Overall, it was determined that DDGS could be included at a rate of up to 60% using twin-screw extrusion, and that viable pelleted floating feeds can be produced.  相似文献   

7.
该研究旨在探究不同饲料级磷酸盐理化特性指标的差异,分析其相关性,找出关键理化特性指标,并建立饲料级磷酸盐的评价体系。选取常用的5种磷酸氢钙、4种磷酸二氢钙和3种磷酸一二钙为试验材料,测定分析水分、比表面积、滑动摩擦角、休止角、松散密度、振实密度、压缩度、吸水性指数、水溶性指数及溶胀度等理化特性指标,运用主成分分析法精简理化特性指标,并计算各样品的综合得分。结果表明：1）不同饲料级磷酸盐理化特性存在一定差异,也存在不同程度的相关性。饲料级磷酸盐的休止角与比表面积呈极显著正相关（r=0.919,P<0.01）;压缩度与休止角呈极显著正相关（r=0.926,P<0.01）;溶胀度与吸水性指数呈极显著正相关（r=0.930,P<0.01）、与水溶性指数呈极显著负相关（r=-0.987,P<0.01）。2）运用主成分分析,提取了3个有效主成分,累积方差贡献率达到88.27%,确定休止角、比表面积、松装密度、压缩度及水溶性指数为关键的理化特性指标。饲料级磷酸盐理化特性得分排序由大到小依次为磷酸氢钙、磷酸一二钙、磷酸二氢钙,粒状磷酸盐得分较低。综合分析,从饲料级磷酸盐的理化特性考虑,为改善多元化配方的加工性能和颗粒饲料质量,可优先选用磷酸氢钙,研究为不同饲料级磷酸盐在饲料中的应用提供数据基础及参考依据。  相似文献   

8.
This study was conducted to develop a ready‐to‐eat extruded food using a single‐screw laboratory extruder. Blends of Indian barley and rice were used as the ingredients for extrusion. The effect of extrusion variables and barley‐to‐rice ratio on properties like expansion ratio, bulk density, water absorption index, hardness, β‐glucan, L*, a*, b* values, and pasting characteristics of extruded products were studied. A central composite rotatable design was used to evaluate the effects of operating variables: die temperature (150–200°C), initial feed moisture content (20–40%), screw speed (90–110 rpm), and barley flour (10–30%) on properties like expansion ratio, bulk density, water absorption index (WAI), hardness, β‐glucan, L*, a*, b* values, and sensory and pasting characteristics of extruded products. Die temperature >175°C and feed moisture <30% resulted in a steep increase in expansion ratio and a decrease in bulk density. Barley flour content of 10% and feed moisture content of <20% resulted in an increased hardness value. When barley flour content was 30–40% and feed moisture content was <20%, a steep increase in the WAI was noticed. Viscosity values of extruded products were far less than those of corresponding unprocessed counterparts as evaluated. Rapid visco analysis indicated that the extruded blend starches were partially pregelatinized as a result of the extrusion process. Sensory scores indicated that barley flour content at 20%, feed moisture content at 30%, and die temperature at 175°C resulted in an acceptable product. The prepared product was roasted in oil using a particular spice mix and its sensory and nutritional properties were studied.  相似文献   

9.
The objective of this work was to study the effect of addition of milk protein concentrate (MPC, 0–10%) and feed moisture (FM, 20–30%) in a blend of corn starch (CS, 80%) and quality protein maize (QPM, 20%) on different physicochemical characteristics of third‐generation (3G) snack foods using extrusion technology. A laboratory single‐extruder with a 3:1 compression ratio, a rectangular die, and a central composite nonroutable model with two variables were used. The physicochemical characteristics evaluated were expansion index (EI), bulk density (BD), penetration force (PF), and color parameters L*a*b*. EI decreased with the increase of MPC and FM, whereas BD and color parameters (a* and b*) increased; PF showed a minimum point (MPC = 5% and FM = 25%). EI, BD, and PF were selected for the optimization process in an area of superposition of 1.5–4.1% of MPC and 20.0–24.1% of FM. A validation of the optimal area was performed on samples with average values of 4.64 (±0.28) for EI, 141.02 (±7.29) kg m–3 for BD, and 0.0033 (±0.00065) for N m PF. It is feasible to obtain a functional 3G snack food with good expansion characteristics using a microwave oven, and this snack has health benefits due to the addition of MPC and QPM.  相似文献   

10.
The aim of this work was to study the effects of barrel temperature (BT, 93.5–140.5°C), feed moisture (FM, 21.3–34.7%), and winter squash flour content (SFC, 0.43–15.6%) on physicochemical properties of microwave‐expanded third‐generation snack foods obtained by extrusion. Physicochemical properties used for optimization were expansion index (EI), penetration force (PF), specific mechanical energy (SME), and total color difference (ΔE). Response surface methodology was used for the analysis of data. The highest values of EI and lowest values of PF were found at high BT and low FM. The lowest values of SME were obtained at high levels of FM throughout the range of BT and SFC, whereas the highest values of ΔE were obtained at high SFC and low FM. Increasing levels of SFC increased ΔE values, whereas EI and SME values decreased. The best processing conditions (EI > 6.0, PF < 9.5 N, SME < 172 kJ/kg, and ΔE < 18) were found in the range of BT, 122–141°C; FM, 24.7–29.5%; and SFC, 0–10.9%. Under optimal process conditions, the retention of total carotenoids was higher than 60%. It is possible to manufacture third‐generation snack foods with good physicochemical properties, which could bring a health benefit because of the presence of carotenoids and dietary fiber in winter squash flour.  相似文献   

11.
In various Latin American countries, large volumes of potato are classified as unsuitable for use as food and destined for use as feed. This raw material has a high starch and fiber content that could be used in the production of different kinds of food. The objective of this research was the preparation and characterization of extruded whole potato pellets expanded by microwave heating. A 33 central composite routable experimental design and response surface methodology were used. The barrel temperature (BT, 93–127°C), feed moisture (FM, 19–29%), and corn starch concentration (CS, 3–37%) in the blends were evaluated. CS was the most important variable affecting the functional properties of the expanded pellets. Adding CS to the blends increased the expansion index and viscosity and improved luminosity, decreasing the apparent density and breaking force of the products. Low BT and especially high FM increased the luminosity of the expanded pellets. Increasing FM content increased the viscosity of the expanded pellets. The best functional characteristics for the expanded pellets were obtained using a blend of 63% potato flour and 37% CS, extruded at 110°C BT with 24% FM content. Nonfood-grade whole potato flour showed good potential for use in the production of expanded pellets with acceptable functional properties.  相似文献   

12.
挤压加工参数对重组米生产过程及产品膨胀度的影响   总被引：3，自引：1，他引：2  
为了考察重组米生产过程中挤压加工变量对几种系统参数与产品膨胀度的影响,试验以杂交籼米（9?718品种）为原料,利用响应面模型,以螺杆转速、进料速度、进料含水率以及末端机筒温度为输入变量,以挤压系统参数（物料温度、模头压强、扭矩、比机械能和产品含水率）和重组米膨胀度为响应变量,探索在重组米生产过程中加工变量与系统参数及产品膨胀度的关系。结果表明,压强、比机械能和产品膨胀度都受到4个挤压变量的显著影响,但是物料温度受进料速度影响不显著,马达扭矩受末端机筒温度影响不显著,产品含水率仅受进料含水率的显著影响。比机械能与螺杆转速正相关,与进料速度、进料含水率和末端机筒温度负相关。所得二次回归模型均拟合良好,建立的挤压数学模型可应用于重组米生产,为重组米工业化生产的过程预测和产品性质预测提供参考。  相似文献   

13.
Z. Pan  S. Zhang  J. Jane 《Cereal Chemistry》1998,75(4):541-546
The effects of extrusion variables (moisture, screw speed, and temperature) and chemicals (urea and sodium bicarbonate) on the properties of starch-based binders (water absorption, bulk density, binder yield, expansion ratio, solubility, pH) and processing conditions (die temperature and pressure, feed rate, and specific mechanical energy) were studied using a central composite design. All quadratic regression models, except the models for bulk density and pH, were significant at the P ≤ 0.06 level. These models can predict the binder properties and processing conditions when extrusion variables and the chemical concentrations are known. Optimum combinations of the chemical concentrations (g/100 g of starch) and extrusion variables to achieve high water absorption in the binders were 15–20 g of urea /100 g of starch, 0–4 g of sodium bicarbonate/100 g of starch, 35–40 g of moisture/100 g of starch, 100–120 rpm screw speed, and 185–215°C barrel temperature. The molecular degradation of the starch occurred during extrusion, especially when the moisture content of starch was <30 g/100 g of starch.  相似文献   

14.
Organic passion fruit fiber is obtained from organic passion fruit rind and is an interesting source of dietary fiber with potential for use in food products such as breakfast cereals. However, various researchers have confirmed the presence of cyanogenic compounds in passion fruit. The objective of this study was to evaluate the effect of the thermoplastic extrusion process on the residual quantity of total cyanogenic compounds (TCC) in extruded organic breakfast cereal produced with corn flour and different levels of passion fruit fiber added to the formulation. For the production of the extrudates, a 23 complete factorial design was followed, that permitted the analysis of the results by response surface methodology. The effects of the quantity of passion fruit fiber (0–30%), feed moisture content (18–28%) and barrel temperature (120–160°C) on the residual quantity of TCC were studied. The raw passion fruit fiber presented 748.3 mg/kg of TCC. The extruded products presented TCC contents of 0–254.1 mg/kg, increasing significantly with the increase of the quantity of passion fruit fiber. The residual quantity of TCC was influenced by feed moisture, while temperature had no significant effect on this response. Nevertheless, only a small reduction of cyanogenic compounds was verified in the breakfast cereals produced by thermoplastic extrusion. Thus, it was concluded that the toxicity of the cereal blends was not improved by the extrusion process.  相似文献   

15.
The viscoelastic properties of glutinous rice flour extruded at moisture contents of 45–55% and barrel temperatures of 75–95°C have been investigated using a small amplitude oscillatory rheometer. High moisture contents (50 and 55%) resulted in product temperatures 3–5°C lower than the barrel temperatures. It appeared that the moisture content was a key element in influencing the value of G′ and tan δ. Raising product temperature reduced the difference in G′ caused by the moisture content. When the product temperature was >85°C, the extrudates yielded a similar degree of gelatinization despite the difference in moisture content. Meanwhile, both G′ and G″ decreased due to the disintegration of starch granules. The relationship between the energy input, measured as specific mechanical energy, and the viscoelastic properties was also assessed.  相似文献   

16.
Corn masa by‐product streams are high in fiber and are amenable for utilization in livestock feed rations. This approach is a potentially viable alternative to landfilling, the traditional disposal method for these processing residues. Suspended solids were separated from a masa processing waste stream, blended with soybean meal at four levels (0, 10, 20, and 30% wb), and extruded in a laboratory‐scale extruder at speeds of 50 rpm (5.24 rad/sec) and 100 rpm (10.47 rad/sec) with temperature profiles of 80‐90‐100°C and 100‐110‐120°C. Processing conditions, including dough and die temperatures, drive torque, specific mechanical energy consumption, product and feed material throughput rates, dough apparent viscosity, and dough density, were monitored during extrusion. The resulting products were subjected to physical and nutritional characterization to determine the effects of processing conditions for these blends. Extrudate analysis included moisture content, water activity, crude protein, in vitro protein digestibility, crude fat, ash, product diameter, expansion ratios, unit and true density, color, water absorption and solubility, and durability. All blends were suitable for extrusion at the processing conditions used. Blend ratio had little effect on either processing parameters or extrudate properties; extrusion temperature and screw speed, on the other hand, significantly affected both processing and product properties.  相似文献   

17.
Weaning blends, formulated in a 60% cereal to 40% legume combination using teff, pearl millet, cowpea, and peanut, were evaluated for changes in nutritional quality due to the effects of blend and processing method. Four blends were prepared by each of four traditional processing methods: control (unprocessed), roasting, germination, and natural fermentation. The main effect of blend formulation proved to be the stronger determinant of nutrient density, while processing method produced the strongest effect on weaning food viscosity. Germinated blends yielded viscosity measurements significantly below those resulting from other processing methods. Germination of ingredients increased nutrient density and in vitro protein digestibility, while roasting and fermentation produced little change from the control product. Complementation of cereal flours with peanut yielded weaning foods with a significantly (P < 0.01) higher nutrient density, increased in vitro protein digestibility and lower viscosity when compared to cowpea-based blends. The use of 20% whole grain teff in weaning blends increased protein content but did not significantly increase nonstarch polysaccharide content as compared to weaning blends without teff.  相似文献   

18.
A response surface analysis using a second-order central composite design was used to study the effect of extrusion process parameters on the extrudate quality of three blends containing buckwheat flour. The extrudates were prepared as three blends. Blend 1 was a 55:40:5 (w/w) mix of light buckwheat flour, wheat flour, and nonfat dry milk (NFDM). Blend 2 was a 40:55:5 mix of light buckwheat flour, corn meal, and NFDM. Blend 3 was a 30:60:10 mix of light buckwheat flour, corn meal, and NFDM. The blends were processed in a twin-screw extruder with factorial combinations of the parameters including: process temperatures of 95–150°C, dough moisture of 15–22%, and screw speeds of 260–390 rpm. The linear components alone significantly explained most of the variation of expansion index, bulk density, water absorption, and breaking strength. The greatest amount of variability was explained by process temperature for blend 1. Dough moisture accounted for the greatest amount of variation for blends 2 and 3. Maximum predicted expansion index values and high water absorption percentages were obtained at low dough moisture levels. Dough moisture and process temperatures were the most important factors predicting bulk density. Sensory evaluation of texture, color, flavor, and general acceptability scores of selected samples ranked blend 3 > blend 2 > blend 1. The in vitro protein digestibility values ranked blend 1 > blend 2 > blend 3. An increase of up to 9.5% units in the protein digestibility values was observed when compared to the nonextruded raw blends.  相似文献   

19.
This study was conducted to investigate the production of balanced diets for juvenile yellow perch (Perca flavescens) feeds. Six isocaloric (≈3.21 kcal/g), isonitrogenous (30.1 ± 0.4% db) ingredient blends were formulated with 0, 10, 20, 30, 40, and 50% distillers dried grains with solubles (DDGS), and appropriate amounts of soybean meal, fish meal, vitamins, and minerals. Extrusion cooking was performed using a laboratory‐scale single‐screw extruder at a constant barrel temperature profile of 40–90–100°C, and a constant screw speed of 230 rpm (24.1 rad/sec). The mass flow rate was determined during processing; it generally increased with progressively higher DDGS content. Additionally, moisture content, water activity, unit density, expansion ratio, compressive strength, compressive modulus, pellet durability index, water stability, and color were extensively analyzed to quantify the effects of DDGS content on the physical properties of the resulting extrudates. Significant differences (P < 0.05) between blends were observed for color and water activity for both the raw material and extrudates, respectively, and for the unit density of the extrudates. There were significant changes in brightness (L), redness (a), and yellowness (b) among the final products when increasing the DDGS content of the blends. Expansion ratio and compressive strength of the extrudates were low. On the other hand, all blends showed high pellet durability (PDI ≥ 96.18%). Overall, it was ascertained that DDGS could be successfully included at rates of <50%, and that each of the ingredient blends resulted in viable, high quality extrudates.  相似文献   

20.
Nixtamalized and extruded flours from quality protein maize (QPM, V‐537C) and tortillas made from them were evaluated for some technological and nutritional properties and compared with the commercial brand MASECA. Both QPM flours showed higher (P < 0.05) protein content, total color difference, pH, available lysine, and lower (P < 0.05) total starch content, Hunter L value, water absorption index, gelatinization enthalpy, resistant starch, and retrograded resistant starch than nixtamalized MASECA flour. Tortillas from nixtamalized and extruded QPM flours had higher contents of essential amino acids than tortillas from MASECA flour, except for leucine. Tortillas from processed QPM flours also showed higher (P < 0.05) values of the nutritional indicators calculated protein efficiency ratio (C‐PER 1.80–1.85 vs. 1.04), apparent and true in vivo protein digestibility (78.4‐79.1 vs. 75.6% and 76.4–77.4 vs. 74.2%, respectively), PER (2.30–2.43 vs. 1.31), net protein retention (NPR; 2.88–2.89 vs. 2.11), and protein digestibility corrected amino acid score (PDCAAS; 54–55 vs. 29% based on preschool children and 100 vs. 85% based on adults) than MASECA flour. The use of QPM for flour and tortilla preparation may have a positive effect on the nutritional status of people from countries where these products are widely consumed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号