共查询到20条相似文献，搜索用时 31 毫秒
1.
The influence of the physicochemical properties of heat‐moisturetreated and untreated starches from various plant sources on the quality of tempura fried batter was examined. Batter of each starch plus wheat protein (92:8, w/w) was fried. Quality of the resulting fried batter was determined from crispness score, water evaporation, and breaking strength. The crispness score correlated with water evaporation (r = 0.95) and breaking strength (r = 0.97), indicating that water evaporation was a reliable index for evaluation of crispness of fried batter. Determination of water evaporation was easy and simple. The crispness (favorable eating texture) of tempura coating depended largely on starch origin. Among the pasting properties of starch, temperature at maximum viscosity (r = 0.77) and breakdown/maximum viscosity (% breakdown, r = ‐0.82) correlated with water evaporation, suggesting that starch resistant to gelatinization and granule disintegration produced crispy fried batter. This observation was supported by SEM. Water evaporation (r = ‐0.82) and % breakdown (r = 0.95) correlated with degree of amylose gelatinization, indicating that amylose was one of the determinants that controls crispness of fried batter by restraining disintegration of the starch granule structure. 相似文献
2.
Batters were prepared, using rice flour as the main component, and analyzed for their oil uptake properties during frying. Rice flour resisted oil absorption better but was less effective as a thickening agent than wheat flour. Of the rice components, increased amylose in the amylopectin/amylose ratio of the starch decreased the batter oil uptake, whereas increased protein content had the opposite effect. Various additives were introduced and investigated for their ability to develop viscosity and other desirable characteristics for the batter. As additives to the rice flour batters, phosphorylated starch and gelatinized rice flour enhanced both the thickening and oil-reducing capacities of the batter. Compared with values for batters from wheat flour, the percent batter oil uptake in the fried crust for the modified rice flour batters was decreased by up to 62%, and the percent total oil uptake for the whole coated drumstick was reduced by up to 59%. 相似文献
3.
The effects of starch type on the properties of baked starch foams were investigated. Starch types used for baking were normal corn, normal potato, waxy corn, high-amylopectin potato, wheat, and tapioca. Solids content of the starch batters used to bake foam trays ranged from 25 to 45%. Processing parameters and physical properties of the foams were examined. Starch-foamed trays were formed by heating a starch batter inside a closed mold. Scanning electron micrographs showed that the thin-walled foamed trays have a dense outer skin and a less dense interior with large cells. The weight of the foamed trays and density of the foam depended on the amount of batter cooked inside the mold, the percent solids of the batter, and the type of starch used. The high-amylopectin starches made the lightest trays, while the normal cereal starches made the heaviest trays. Baking time depended on percent solids of the batter, the batter volume added to the mold, and starch type. The normal cereal starches had the longest baking times and the high-amylopectin starches had the shortest baking times Strength and flexibility of the trays are correlated with tray weight and foam density. Heavier trays had greater strength and less flexibility than did lighter trays. Physical properties of the trays can be tailored to meet specific criteria by changing the starch type used and the batter solids. 相似文献
4.
The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch. 相似文献
5.
Normal (25% amylose) and high-amylose (70% amylose) corn starches (CS and HA) were hydroxypropylated to 0.1 degree of molar substitution (MS) with propylene oxide in an alkaline-ethanol medium (70% ethanol). CS and hydroxypropylated corn starch (HPCS) were mixed on dry basis with water and glycerol at a weight ratio of 7:2:1, and HA and hydroxypropylated high amylose corn starch (HPHA) were mixed at 7:3:1. Stearic acid, glycerol monostearate, or lecithin (3%, based on starch) was added to each mixture to examine the effects on the physical properties of the extrudate. The starch mixtures were extruded at high shear (100 rpm) to nonexpanded strands using a corotating twin-screw extruder in a temperature range of 75–90°C. HA, alone and with all additives, showed lower die swelling in extrusion than did CS, whereas HPCS and HPHA showed higher die swelling than the corresponding unmodified starches. Water absorption of all HA extrudates was lower than those of all CS extrudates (22–35% and 68–97%, respectively, at 25°C). Hydroxypropylation increased the absorption for both starches. All extruded starches, regardless of additives, showed low solubility in water (0.1–1.0% for 2 hr at 25°C). Differential scanning calorimetry indicated that during extrusion, the lipid additives formed a helical complex with amylose in CS and HA, but weakly with HPCS and HPHA. The extruded strands of HA, alone and with additives, exhibited higher tensile and bending strengths (37.1–58.4 and 2.16–5.07 MPa, respectively), compared to the CS strands (12.5–59.3 and 1.06–4.10 MPa, respectively) at the same moisture content (7.5–8.5%). Both tensile strength and percent of elongation of the starch strands were reduced by the presence of a lipid additive. Hydroxypropylation increased elongation and flexibility of the extrudates. HPHA exhibited the greatest mechanical strength and flexibility among the tested starches. 相似文献
6.
Zero amylose starch isolated from hull-less barley (HB) showed a typical A-type diffraction pattern. The X-ray analysis suggested that granules of zero amylose (SB94794) and 5% amylose (CDC Candle) HB starches had lower crystallinity than did commercial waxy corn starch. Differential scanning calorimetry showed lower transition temperatures and endothermal enthalpies for the HB starches than for the waxy corn starch. The zero amylose HB starch showed a Brabender pasting curve similar to that of waxy corn starch, but with lower pasting and peak temperatures and a higher peak viscosity. Noteworthy characteristics of zero amylose HB starch were its low pasting temperature and high paste clarity and freezethaw stability, which make this starch useful for many food and industrial applications. 相似文献
7.
Phosphorylated starches were prepared with sodium tripolyphosphate (STPP) at pH 6, 8, and 10 from waxy (wx, 3.3% amylose), normal (22.4% amylose), and two high-amylose (ae, 47 and 66% amylose) maize starches. After phosphorylation, the gelatinization peak temperature (Tp) decreased and pasting peak viscosity (PV) increased for all the starches except wx, which showed a slight increase in gelatinization temperature. There was a substantial effect of phosphorylation pH on paste viscosity. More crosslinking was found in ae starches with phosphorylation at pH 10. Sodium ions apparently decreased PV of all the phosphorylated starches while only slightly affecting PV of native starches. Phosphorylation increased swelling power of some of the starches, with maximum swelling power at phosphorylation pH 8 and minimum at pH 10. Maximum swelling power for wx starch after preparation was at pH 8 and minimum at pH 6. After phosphorylation, the clarity and freeze-thaw stability of all the starches was greatly increased compared with the native starches. Phosphorylation increased digestibility of ae starches but had little effect on wx and normal starches. After phosphorylation, the adhesiveness, springiness, and cohesiveness of all starch gels generally increased, the hardness of 47% ae and wx starches increased, and that of normal starches decreased. Enthalpy of gelatinization decreased after phosphorylation with the greatest decrease observed for ae starches. When the phosphorylation pH increased from 6 to 10, the brightness (L*) of all the phosphorylated starches decreased, while a* and b* of all the phosphorylated starch increased. Scanning electron micrographs showed some erosion on the surface of starch granules after phosphorylation. 相似文献
8.
Resistant starches (RS) were prepared by phosphorylation of wheat, waxy wheat, corn, waxy corn, high‐amylose corn, oat, rice, tapioca, mung bean, banana, and potato starches in aqueous slurry (≈33% starch solids, w/w) with 1–19% (starch basis) of a 99:1 (w/w) mixture of sodium trimetaphosphate (STMP) and sodium tripolyphosphate (STPP) at pH 10.5–12.3 and 25–70°C for 0.5–24 hr with sodium sulfate or sodium chloride at 0–20% (starch basis). The RS4 products contain ≤100% dietary fiber when assayed with the total dietary fiber method of the Association of Official Analytical Chemists (AOAC). In vitro digestion of four RS4 wheat starches showed they contained 13–22% slowly digestible starch (SDS) and 36–66% RS. However after gelatinization, RS levels fell by 7–25% of ungelatinized levels, while SDS levels remained nearly the same. The cross‐linked RS4 starches were distinguished from native starches by elevated phosphorus levels, low swelling powers (≈3g/g) at 95°C, insolubilities (<1%) in 1M potassium hydroxide or 95% dimethyl sulfoxide, and increased temperatures and decreased enthalpies of gelatinization measured by differential scanning calorimetry. 相似文献
9.
Amylose contents of prime starches from nonwaxy and high-amylose barley, determined by colorimetric method, were 24.6 and 48.7%, respectively, whereas waxy starch contained only a trace (0.04%) of amylose. There was little difference in isoamylase-debranched amylopectin between nonwaxy and high-amylose barley, whereas amylopectin from waxy barley had a significantly higher percentage of fraction with degree of polymerization < 15 (45%). The X-ray diffraction pattern of waxy starch differed from nonwaxy and high-amylose starches. Waxy starch had sharper peaks at 0.58, 0.51, 0.49, and 0.38 nm than nonwaxy and high-amylose starches. The d-spacing at 0.44 nm, characterizing the amylose-lipids complex, was most evident for high-amylose starch and was not observed in waxy starch. Differential scanning calorimetry (DSC) thermograms of prime starch from nonwaxy and high-amylose barley exhibited two prominent transition peaks: the first was >60°C and corresponded to starch gelatinization; the second was >100°C and corresponded to the amylose-lipid complex. Starch from waxy barley had only one endothermic gelatinization peak of amylopectin with an enthalpy value of 16.0 J/g. The retrogradation of gelatinized starch of three types of barley stored at 4°C showed that amylopectin recrystallization rates of nonwaxy and high-amylose barley were comparable when recrystallization enthalpy was calculated based on the percentage of amylopectin. No amylopectin recrystallization peak was observed in waxy barley. Storage time had a strong influence on recrystallization of amylopectin. The enthalpy value for nonwaxy barley increased from 1.93 J/g after 24 hr of storage to 3.74 J/g after 120 hr. When gel was rescanned every 24 hr, a significant decrease in enthalpy was recorded. A highly statistically significant correlation (r = 0.991) between DSC values of retrograded starch of nonwaxy barley and gel hardness was obtained. The correlation between starch enthalpy value and gel hardness of starch concentrate indicates that gel texture is due mainly to its starch structure and functionality. The relationship between the properties of starch and starch concentrate may favor the application of barley starch concentrate without the necessity of using the wet fractionation process. 相似文献
10.
Starches from normal, waxy, and sugary‐2 (su2) corn kernels were isolated, and their structures and properties determined. The total lipid contents of normal, waxy, and su2 corn starches were 0.84, 0.00, and 1.61%, respectively. Scanning electron micrographs showed that normal and waxy corn starch granules were spherical or angular in shape with smooth surfaces. The su2 starch granules consisted of lobes that resembled starch mutants deficient in soluble starch synthases. Normal and waxy corn starches displayed A‐type X‐ray patterns. The su2 starch showed a weak A‐type pattern. The chain‐length distributions of normal, waxy, and su2 debranched amylopectins showed the first peak chain length at DP (degree of polymerization) 13, 14, and 13, respectively; second peak chain length at DP 45, 49, and 49, respectively; and highest detectable DP of 80, 72, and 76, respectively. The su2 amylopectin showed a higher percentage of chains with DP 6–12 (22.2%) than normal (15.0%) and waxy (14.6%) amylopectins. The absolute amylose content of normal, waxy, and su2 starches was 18.8, 0.0, and 27.3%, respectively. Gel‐permeation profiles of su2 corn starch displayed a considerable amount of intermediate components. The su2 corn starch displayed lower gelatinization temperature, enthalpy change, and viscosity; a significantly higher enthalpy change for melting of amylose‐lipid complex; and lower melting temperature and enthalpy change for retrograded starch than did normal and waxy corn starches. The initial rate of hydrolysis (3 hr) of the corn starches followed the order su2 > waxy > normal corn. Waxy and su2 starches were hydrolyzed to the same extent, which was higher than normal starch after a 72‐hr hydrolysis period. 相似文献
11.
Normal corn, high-amylose corn, waxy corn (waxy maize), wheat, rice, potato, cassava (tapioca), and a modified waxy corn starch were blended in various combinations and ratios. Pasting behavior, paste and thermal properties, and retrogradation tendency were determined. Differential scanning calorimetry (DSC) traces of the mixtures did not resemble those of either of the two components, nor did any DSC trace have two peaks suggestive of a mixture of two distinct starches. Amylograph data suggested that some mixtures behaved like a chemically modified starch. Observations from light microscopy suggested that intermolecular, molecular-supermolecular, and intersupermolecular interactions may be responsible for this behavior. 相似文献
12.
The formation and properties of a crust during and after deep frying are difficult to study. Batter pickup (the amount of batter adhering to a product) and core properties affect crust formation and properties of the crust in such way that it is difficult to compare batters of different viscosity or cores with different properties. Moreover, it is often difficult and laborious to separate the crust/batter from the core. Another problem is the poor reproducibility of many fried products. A deep‐fried model (DFM) was designed, making it possible to study crust formation and crust properties without the difficulties stated above. Two different batter types and three cores have been used to test the system. Crusts obtained from the DFM were evaluated on several physiochemical properties and compared with crusts found around commercial deep‐fried products. Results show that crusts obtained with the DFM system are comparable to crusts of commercial products. The good reproducibility of the DFM crusts resulted in low variance in analytical results compared with commercial crusts. This high reproducibility, the versatility of the system, and the ease with which the system can be used offer clear benefits for many potential applications. 相似文献
13.
Lai Ming Tam Harold Corke Wilson T. Tan Jiansheng Li Lilia S. Collado 《Cereal Chemistry》2004,81(4):475-480
Maize starches extracted from selected maize cultivars with 0.2–60.8% amylose contents were used to produce bihon-type noodles. Starch dough using a pregelatinized starch binder was prepared and extruded through a laboratory-scale extruder simulating the traditional process of making bihon in the Philippines. The normal maize starches with amylose content of ≈28% were successfully used for bihon-type noodle production, but waxy maize starches with 0.2–3.8% amylose content and high-amylose maize starches with 40.0–60.8% amylose content failed to produce bihon-type noodles. Viscoamylograph profile parameters and swelling volume are significantly correlated to amylose content of maize starch samples evaluated. These physicochemical properties may be used to indicate that the starch samples at normal amylose levels may be used for bihon-type noodles. Starch noodles produced in the laboratory were not significantly different in terms of either cooking quality or textural properties from two commercially produced maize noodle samples, except for adhesiveness. The laboratory process and fabricated extruder can be used to produce bihon-type noodles. 相似文献
14.
To determine the rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) contents in a starch sample, the addition of amyloglucosidase is often used to convert hydrolyzates from α-amylase digestion to glucose. The objectives of this study were to investigate the exact role of amyloglucosidase in determining the digestibility of starch and to understand the mechanism of enzymatic actions on starch granules. Four maize starches differing in amylose content were examined: waxy maize (0.5% amylose), normal maize (≈27% amylose), and two high-amylose starches (≈57 and ≈71% amylose). Notably, without amyloglucosidase addition, the RS content increased from 4.3 to 74.3% for waxy maize starch, 29.7 to 76.5% for normal maize starch, 65.8 to 88.0% for starch with 57% amylose, and 68.2 to 90.4% for the starch with 71% amylose. In the method without α-amylase addition, less RS was produced than without added amyloglucosidase, except in maize at 71% amylose content. Scanning electron microscopy (SEM) revealed the digestive patterns of pinholes with α-amylase and burrowing with amyloglucosidase as well as the degree of digestion between samples. To understand the roles of amyloglucosidase and α-amylase in the in vitro test, multiple analytical techniques including gel permeation chromatography, SEM, synchrotron wide-angle X-ray diffraction, and small-angle X-ray scattering were used to determine the molecular and crystalline structure before and after digestion. Amyloglucosidase has a significant impact on the SDS and RS contents of granular maize starches. 相似文献
15.
The degradation rates of rice and corn starches with different contents of amylose treated in methanol containing 0.36% HCl at 25 degrees C for 1-15 days were evaluated by monitoring the weight average degree of polymerization of starch. A two-stage degradation pattern during acid-methanol treatment was found for the starches studied, which were the slow (first) and the rapid (second) degradation stages. Waxy starches showed a shorter time period of the first stage than that of nonwaxy starch. Rice starch showed a shorter time period of the first stage and a higher degradation rate of the second stage than the counterpart corn starch with similar amylose content. Despite the botanic source and amylose content of starch, the degradation rate of starch in the second stage significantly (p < 0.05) correlated to the S/L ratio (r = -0.886) and polydispersity (r = 0.859) of amylopectin branch chains of native starch. 相似文献
16.
X. Wu R. Zhao D. Wang S. R. Bean P. A. Seib M. R. Tuinstra M. Campbell A. O'Brien 《Cereal Chemistry》2006,83(5):569-575
The effects of amylose, protein, and fiber contents on ethanol yields were evaluated using artificially formulated media made from commercial corn starches with different contents of amylose, corn protein, and corn fiber, as well as media made from different cereal sources including corn, sorghum, and wheat with different amylose contents. Second‐order response‐surface regression models were used to study the effects and interactions of amylose, protein, and fiber contents on ethanol yield and conversion efficiency. The results showed that the amylose content of starches had a significant (P < 0.001) effect on ethanol conversion efficiency. No significant effect of protein content on ethanol production was observed. Fiber did not show a significant effect on ethanol fermentation either. Conversion efficiencies increased as the amylose content decreased, especially when the amylose content was >35%. The reduced quadratic model fits the conversion efficiency data better than the full quadratic model does. Fermentation tests on mashes made from corn, sorghum, and wheat samples with different amylose contents confirmed the adverse effect of amylose content on fermentation efficiency. High‐temperature cooking with agitation significantly increased the conversion efficiencies on mashes made from high‐amylose (35–70%) ground corn and starches. A cooking temperature of ≥160°C was needed on high‐amylose corn and starches to obtain a conversion efficiency equal to that of normal corn and starch. 相似文献
17.
Influence of storage conditions on the structure, thermal behavior, and formation of enzyme-resistant starch in extruded starches 总被引：1，自引：0，他引：1
Chanvrier H Uthayakumaran S Appelqvist IA Gidley MJ Gilbert EP López-Rubio A 《Journal of agricultural and food chemistry》2007,55(24):9883-9890
Starch structures from an extrusion process were stored at different temperatures to allow for molecular rearrangement (retrogradation); their thermal characteristics (DSC) and resistance to amylase digestion were measured and compared. The structure of four native and processed starches containing different amylose/amylopectin compositions (3.5, 30.8, 32, and 80% amylose content, respectively) before and after digestion was studied with small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD). Rearrangement of the amylose molecules was observed for each storage condition as measured by the DSC endotherm at around 145 degrees C. The crystalline organization of the starches after processing and storage was qualitatively different to that of the native starches. However, there was no direct correlation between the initial crystallinity and the amount of enzyme-resistant starch (ERS) measured after in vitro digestion, and only in the case of high-amylose starch did the postprocess conditioning used lead to a small increase in the amount of starch remaining after the enzymatic treatment. From the results obtained, it can be concluded that retrograded amylose is not directly correlated with ERS and alternative mechanisms must be responsible for ERS formation. 相似文献
18.
Four rice starches were isolated from waxy and nonwaxy rice cultivars collected from different places in China. Individual rice starches were examined, along with their corresponding mixtures in different ratios, in terms of pasting and hydration properties. Analysis by micro‐viscoamylography (MVAG) showed that waxy rice starch and its blends had higher peak viscosity (PV), breakdown (BD), and setback (SB) than the remaining starches and mixtures. Apparent amylose content (AC) was 16.95–29.85% in nonwaxy individual rice starches and 13.69–25.07% in rice starch blends. Incorporating waxy rice starch (25%) significantly decreased the AC. AC correlated negatively with swelling power (SP) (r = ‐0.925, P < 0.01). SP exhibited nonlinear relationship (r2 = 0.8204) with water solubility (WS) and both increased with temperature. The correlation showed that WS is also an index of starch characteristics and the granules rigidity affected the granule swelling potential. The results show that turbidity of gelatinized starch suspensions stored at 4 ± 0.5°C generally increased during storage up to five days. 相似文献
19.
Oxidized corn starch prepared by a semi-dry process using hydrogen peroxide as an oxidant was studied. The optimum oxidation conditions of corn starch were mole ratio of H2O2 and anhydroglucose unit (0.219); mole ratio of NaOH and anhydroglucose unit (0.144); moisture content of the reaction mixture (27.2%); and reaction temperature (65°C). Compared with oxidized corn starch produced by reacting starch with sodium hypochlorite in alkaline slurry, oxidized corn starches produced by a semi-dry process apparently had different properties. Oxidation by a semi-dry process for corn starch resulted in significant changes in the degree of crystallinity of starch and the changes increased with the increase of carboxyl content of starch. Peak viscosities of oxidized starches produced by a semi-dry process were lower than those of commercial corn starch at similar carboxyl contents, while the final viscosities and setbacks of the former were much higher than the latter. There were apparent differences for texture properties among oxidized starches prepared by different processes. Onset temperature, peak temperature, and conclusion temperature of semi-dry oxidation starches were higher than those of commercial oxidized starch, while the enthalpy of gelatinization of the former were lower than the latter. 相似文献
20.
Aqueous dispersions (2 mg/mL) of debranched corn starches of different amylose contents (waxy, normal, and high‐amylose) were subjected to extensive autoclaving and boiling‐stirring, and then the changes in starch chain profile were examined using medium‐pressure, aqueous, size‐exclusion column chromatography. As autoclaving time increased from 15 to 60 min, weight‐average chain length (CLw) of waxy, normal, and high‐amylose corn starches determined using pullulan standards decreased from 46 to 41.2, from 122.1 to 96.3, and from 207.3 to 151.8, respectively. Number‐average chain length (CLn) measured by the Nelson‐Somogyi method also decreased from 23.0 to 18.4, from 26.4 to 21.8, and from 66.5 to 41.5, respectively, indicating that thermal degradation of starch chains occurred. The CLw/CLn ratio for normal corn starch was higher than that for waxy corn starch, indicating an increase in polydispersity of the amylose fraction. Thermal degradation was also observed when the debranched starch was subjected to the boiling‐stirring treatment (0–96 hr). During 96 hr, the CLw and relative proportion of B≥2 chains of amylopectin released by debranching waxy corn starch increased, whereas those of B1 chains decreased. This change may indicate physical aggregation of B1 chains. But branches from normal and high‐amylose corn starches showed increases in CLw and the proportion of both B1 and B≥2 chains, along with substantial decreases in those of amylose chains. Therefore, thermal degradation of amylose was greater than that of amylopectin. 相似文献