首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
In order to study the functional properties of glutenin subunits added to a dough, they must be incorporated into the glutenin polymer. This requires partial reduction to open up the polymer, followed by oxidation to incorporate the added monomer into the polymer. Existing methods for incorporating glutenin subunits were suitable only for studies on mixing properties and needed to be modified for use in studies on extension and baking. A range of concentrations and of reaction times was therefore tested for both the reductant and the oxidant. In addition, mixing time as well as relaxation time before extension were varied. Extension curves and loaf heights were used to evaluate the treatments. Optimum conditions were developed that provided extension curves of normal dimensions but with altered shape. The conditions were reduction with 0.2 mg/mL of dithiothreitol (DTT) solution for 1 min followed by oxidation with 5 mg/mL of KIO3 solution, then mixing the dough to 70% of the peak dough development time. For microbaking, the conditions of 2 mg/mL of DTT for 1 min, 2.5 mg/mL of KIO3 for 5 min, and mixing the dough to peak development time allowed loaf height to be retained. The size distribution of the glutenin polymer was analyzed using size‐exclusion HPLC and field‐flow fractionation methods. This showed that the monomers were incorporated into the polymer and that polymer size was restored to control levels following reduction and oxidation.  相似文献   

2.
Two field trials using four New Zealand wheat cultivars were undertaken to observe the effects of nitrogen and sulfur fertilization on protein composition, mixing requirements, and dough strength and to compare the results with that observed with a single cultivar, Otane. The results confirmed that adequate sulfur fertilization was necessary to ensure lower dough mixing requirements. The existence of a nexus between mixing requirements and dough strength was confirmed and genotype has significant effects on it. Variation in the content of HMW‐GS in the protein corresponded to changes in dough mixing requirement of Otane. Across the four cultivars, dough mixing requirements (mechanical dough development work input and mixograph development time) and dough strength (Extensigraph resistance to extension) depended on different aspects of protein composition. As the content of polymeric proteins increased, MDD work input increased, but mixograph development time decreased, while the effect on Rmax was small. Rmax, however, was more affected by either the content of small monomerics in the flour or the ratio between HMW‐GS peak area to total gliadin peak area. The ratio of MDD work input to Rmax was largely explained by the gliadin content of the flour. Thus, depending on the genetic background, it should be possible to adjust dough mixing requirements by modifying overall HMW‐GS, LMW‐GS, or gliadin content while maintaining dough strength.  相似文献   

3.
高场强超声-加热联用增强大豆分离蛋白冷凝胶凝胶特性   总被引：1，自引：1，他引：0  
为探究高场强超声技术对大豆分离蛋白葡萄糖酸内酯冷凝胶性的影响,该研究将高场强超声技术与加热处理联用,对大豆蛋白进行预处理后形成冷凝胶。采用质构仪、圆二色谱、荧光色谱、扫描电镜、电泳、粒度仪等多种表征手段,比较了2种高场强超声-加热联用工艺对大豆分离蛋白冷凝胶凝胶性的影响,并推测其作用机理。研究发现:与传统加热预处理相比,2种高场强超声-加热联用预处理都能够显著(P0.05)增强大豆分离蛋白冷凝胶的持水性和凝胶强度。工艺一(20 k Hz,400 W下先超声0、2、4、10 min后加热20 min)制备的冷凝胶的凝胶强度与持水性随超声时间的增加逐步增加(凝胶强度由(5.83±0.31)g增加到(46.37±1.15)g;持水性由42.04%±1.59%增加到81.74%±6.22%),而工艺二(先加热20 min后超声0、2、4、10 min)制备的冷凝胶的凝胶强度与持水性在较短超声时间内(4 min内)迅速增加(凝胶强度由(5.83±0.31)g增加到(37.57±2.57)g;持水性由42.03%±1.85%增加到79.31%±3.00%)。与工艺一相比,工艺二能够在较短超声时间内增强大豆分离蛋白冷凝胶性的机理可能在于:工艺二的处理方式,大豆蛋白经过热处理后充分展开、变性,使超声作用能在较短的时间内对大豆分离蛋白的二级结构和三级结构明显改变,暴露更多疏水基团,增加疏水环境和表面疏水性,增强蛋白在溶液中的溶解性,并增强大豆蛋白分子间的静电相互作用,从而形成致密、均一的微观凝胶结构,增加凝胶的持水性和凝胶强度。研究结果可为高场强超声-加热联用技术在大豆加工领域中的应用提供参考。  相似文献   

4.
A negative relationship between dough strength and dough extensibility would pose a problem for breeding hard wheats, as both dough strength and dough extensibility are desirable. We derived 77 recombinant inbred lines (RIL) from a cross between hard red spring wheat cultivars McNeal and Thatcher. McNeal produces flour with stronger dough and lower extensibility than does Thatcher. RIL were evaluated for strength‐related properties using mixograph analysis and extensibility parameters using the Kieffer attachment to the TA.XT2 texture analyzer. Additionally, the RIL were test baked. Measurements using the mixograph and the Kieffer attachment were highly heritable. Maximum dough extensibility (Extmax) was negatively correlated with resistance to extension (Rmax) (r = ‐0.74) and with mixograph tolerance (r = ‐0.45). Loaf volume was correlated with both Rmax (r = 0.42) and area under the extensigraph curve (r = 0.44) based on partial correlation analysis adjusted for protein differences. Extmax was negatively correlated with loaf volume (r = ‐0.26). The McNeal allele for polymorphism at the Gli1‐B1 locus on chromosome 1BS caused high dough‐mixing tolerance and low dough extensibility. Our results suggest that traditional selection criteria in hard red spring wheat, including tolerance to dough mixing and high loaf volume, may result in reduced dough extensibility.  相似文献   

5.
Changes in the amounts, molecular weight distributions, and levels of major groups of subunits in the glutenin macropolymer (GMP) of doughs during mixing were investigated. The GMP (gel protein) is the unreduced fraction of gluten protein that remains as a layer on top of the starch after extraction of SDS-soluble proteins and centrifugation. Experiments involved doughs prepared from flours derived from one weak and one strong cultivar and lines derived from cv. Olympic that were null for specific high molecular weight glutenin subunits (HMW-GS). During mixing, the amount of GMP decreased; the major changes occurred before peak mixing time (MT, achievement of peak resistance). In addition, the average apparent molecular weight of GMP (determined by both size-exclusion HPLC and multilayer gel electrophoresis) decreased during mixing, but in this case, the major changes were seen later in the mixing process, during dough breakdown. Even after extensive mixing, polymers and oligomers were released, not free glutenin subunits. During dough breakdown, the composition of GMP also changed, such that the proportion of HMW-GS decreased but β-amylases/D low molecular weight glutenin subunits (LMW-GS) increased. Changes in the total amounts of other LMW-GS typically were smaller with a decrease in the proportion of B subunits and an increase in the proportion of C subunits. The major changes in GMP composition were observed after peak MT (peak resistance) occurring earlier and to a greater extent in the weaker dough. Our results suggest that dough breakdown during mixing may be triggered by loss of HMW-GS, leading to changes in the molecular weight distribution and composition of the disulfide-bonded GMP.  相似文献   

6.
Monoacylglycerol‐stabilized oil in water emulsion (MAG gel) is an alternate shortening that is free of trans fatty acids, and low in saturated fatty acids. However, the behavior of MAG gels in comparison to other lipids has not been studied. This study investigated effects of structured MAG gel, a mixture of MAG gel unstructured components (Mixture), canola oil (Oil), or interesterified soy shortening (IE Soy) at different levels (6–24%) on hard or soft wheat dough properties. Doughs were prepared with different lipid types at equivalent lipid contents. Dough mixing and water absorption parameters were evaluated using a farinograph; gluten behavior was measured using a gluten peak tester (GPT); and pasting characteristics were measured using a micro‐viscoamylograph (MVAG). Water absorption values decreased with increasing lipid content. Dough development times were similar between the MAG gel and IE Soy, but farinogram curve characteristics during mixing were similar between MAG gel, Mixture, and Oil. The trend for peak max time in GPT was similar between MAG gel and IE Soy exhibiting delayed gluten aggregation; whereas Mixture and Oil exhibited earlier gluten aggregation. In MVAG, starch interaction with monoglyceride component of MAG gel and Mixture appeared to be the dominating factor resulting in increased pasting temperature and a second viscosity peak during cooling at higher levels of lipid addition.  相似文献   

7.
为揭示小麦粉面团形成过程水分状态和比例、面团结构的变化,以及这种变化与粉质仪和拉伸仪表征的质量特性之间的关系;认识面团形成过程表征筋力强弱的物质基础和变化机理。选用中筋(宁春4号)和强筋(师栾02-1)小麦品种为试验材料,利用低场核磁共振技术测定粉质仪和面过程、拉伸仪醒发拉伸过程不同时间点面团水分状态和比例的变化;利用红外显微成像技术分析面团形成过程不同取样点蛋白质和淀粉的分布及结构变化。结果表明,面粉原料中主要为弱结合水。面粉在粉质仪加水搅拌形成面团后,水分状态和比例发生显著变化,面团中的水可以分为强结合水(T_(21))、弱结合水(T_(22))和自由水(T_(23))。面团搅拌形成过程中,中筋小麦品种宁春4号面团中的强结合水比例显著降低;师栾02-1的强结合水的弛豫时间在和面终点消失,弱结合水的弛豫时间显著延长,而自由水的比例显著增加(P0.05)。强筋小麦粉强结合水的保持时间较长。拉伸过程加盐和不加盐对同一取样点、同一种水分状态之间的水分弛豫时间和比例无显著影响;宁春4号自由水的弛豫时间在加盐和不加盐处理时都显著缩短(P0.05)。湿面筋含量高、筋力较强面团的蛋白质网络结构致密。粉质仪和面过程强结合水和弱结合水弛豫时间和比例的变化,与面筋含量和强度有关。该结论可为面制品加工过程和面工艺选择与优化等方面提供一定的理论参考。  相似文献   

8.
糖接枝处理改善大豆蛋白纤维聚集体泡沫稳定性   总被引：4，自引：3，他引：1  
为了探究糖接枝对大豆蛋白纤维聚集行为和泡沫性质的影响,明确蛋白质结构与功能的关系,该研究以大豆蛋白(soy protein isolation,SPI)和乳糖(lactose)为原料,通过干热法制备糖接枝大豆蛋白(SPI-lactose conjugate,SPI-Lac),以及在酸性条件下加热诱导其形成纤维聚集体(p H值2.0),制备了一种糖接枝大豆蛋白纤维聚集体(SPI-lactose conjugate fibillar aggregates),并考察了糖接枝对大豆蛋白的纤维聚集行为及泡沫性质的影响。研究结果表明:大豆蛋白在酸性条件下(p H值2.0)经加热后会发生水解,同时水解产物不断聚集形成大分子的纤维聚集体。糖接枝导致大豆蛋白的水解速度下降,但荧光光强和粒径的结果表明糖接枝能增强纤维聚集能力。SPI-Lac在中性条件下的溶解度(p H值5.0—7.0)显著高于SPI(P0.05),且不同时间处理的SPI-Lac纤维聚集体均能改善SPI在酸性条件下的溶解度(p H值2.0—5.0)。此外,不同时间处理的SPI-Lac纤维聚集体在酸性条件下的起泡能力均高于SPI纤维聚集体。SPI和SPI-Lac纤维聚集体的形成会导致SPI起泡能力的下降,但是短时间酸热处理形成的纤维聚集体泡沫稳定性得到显著改善。因此,糖接枝结合短时间酸热处理制备的糖接枝大豆蛋白纤维聚集体在中性条件下的泡沫稳定性显著提高(P0.05),是合理有效的蛋白质改性方法。  相似文献   

9.
适宜含水率保持油茶籽贮藏品质   总被引：4，自引：4，他引：0  
为了确定油茶籽贮藏适宜的含水率,研究了在4℃,不同含水率(7%、10%、13%、16%、20%)油茶籽贮藏期间的品质变化。结果表明,较低的含水率能较好保持油茶籽的贮藏特性及营养品质。其中,含水率为7%的油茶籽贮藏效果较好,但与10%处理效果差异不明显(P>0.05)。在整个贮藏期,含水率为7%时油茶籽可溶性蛋白下降了13.05 mg/g,油酸含量下降了2.38%,酸值、过氧化值等品质指标上升速率较慢,同时能较好保持β-谷甾醇和角鲨烯等生物活性成分;其次是10%的含水率处理。而含水率为20%的油茶籽贮藏期间可溶性蛋白下降较快,贮藏结束时为25.47 mg/g,油茶籽劣变严重,所提取的油样品质变差,营养物质含量较少,因此含水率20%的油茶籽不适宜长期贮藏。综合考虑油茶籽品质因素和处理成本,认为控制含水率在10%以下能较好保持油茶籽的贮藏品质。该研究可为科学合理地贮藏油茶籽提供参考。  相似文献   

10.
The use of a laboratory-scale mixer for predicting the mixing requirement of flours in an industrial-scale mixer was investigated by measuring the work input required to mix a range of flours to peak consistency on both a laboratory-scale and an industrial-scale mechanical dough development (MDD) mixer. The industrial mixer used was a Tweedy-type mixer, and the mixing optimum was determined using a probe that sensed changes in dough consistency. Work input was estimated from mixer motor power, taking into account expected motor and drive chain losses, and from dough temperature rise measurements. The laboratory mixer used twin flat-bladed rotors; mixing optimum and work input were determined from the torque measurement. Work inputs from both mixers were highly correlated (r2 = 0.88) but with a large offset (the industrial mixer requiring more work to develop the dough). The two methods of measuring industrial mixer work inputs gave slightly different results leading to uncertainty as to the actual work given by the industrial mixer. Farinograph mixing properties were less well correlated with industrial-scale work input requirement than the laboratory-scale MDD mixer.  相似文献   

11.
The rheological properties of wheat doughs prepared from different flour types, water contents, and mixing times for a total of 20 dough systems were studied. The results were compared with the results of standard baking tests with the same factors. Water and flour type had a significant effect on storage modulus (G′) or phase angle measured by an oscillatory test both in the linear viscoelastic region and as a function of stress, and on compressional force measured as a function of time. The correlation of maximum force of dough in compression and G′ of dough measured within the linear viscoelastic region was r = 0.80. Correlation between the compression and oscillation test improved when all measuring points of the G′ stress curve were included (r = 0.88). The baking performance of the different doughs varied greatly; loaf volumes ranged from 2.9 to 4.7 mL/g. Although the water content of the dough correlated with the rheological measurements, the correlation of G′measured in the linear viscoelastic region or maximum force from stress‐time curve during compression was poor for bread loaf volumes. Mixing time from 4.5 to 15.5 min did not affect the rheological measurements. No correlation was observed with the maximum force of compression or G′ of dough measured in the linear viscoelastic region and baking performance. Good correlation of rheological measurements of doughs and baking performance was obtained when all the data points from force‐time curve and whole stress sweep (G′ as a function of stress) were evaluated with multivariate partial least squares regression. Correlation of all data points with loaf volume was r = 0.81 and 0.72, respectively, in compression and shear oscillation.  相似文献   

12.
《Cereal Chemistry》2017,94(5):909-915
Gluten aggregation behaviors of wheat flour were evaluated using a high‐shear‐based method with the GlutoPeak instrument and related to flour functional properties. GlutoPeak peak time (PT) and peak area (PA) were positively associated with gluten strength but negatively affected by farinograph absorption (FAB). GlutoPeak maximum torque (T max) was highly positively (P < 0.001) correlated with FAB regardless of gluten strength. PT and PA increased with the decrease of FAB. This could result in overestimation of gluten strength owing to water absorption. To account for the impact of FAB, a new parameter GlutoPeak strength index (GSI) was introduced for predicting gluten strength. GSI was obtained by multiplying T max and PA. This arithmetic product was found to provide greater correlation (r = 0.91) with dough strength than those of PA (r = 0.84) or PT (r = 0.57) based on the analysis of 56 advanced breeding lines with wide range of FAB. Moreover, significant relationships were found between GSI and flour mixing and baking properties. Using 8 g of flour and with a test time of less than 10 min, the GlutoPeak instrument shows great potential as a rapid tool for gluten strength selection.  相似文献   

13.
  相似文献   

14.
The effects of α‐ + β‐, γ‐, ω‐ and total gliadins on mixing, extension baking, and techno‐functional properties of doughs from hard and soft flours were measured using small‐scale techniques. The addition of all gliadin fractions resulted in decreased mixing time, peak resistance, maximum resistance to extension, and loaf height, and in increased resistance breakdown and extensibility. The various gliadin fractions showed differences in functional properties, with γ‐gliadin reducing the mixing time and maximum resistance to extension to the greatest extent, ω‐gliadin contributing to the greatest reduction in loaf height, and α‐ + β‐gliadins having the least effect on reducing loaf height. The effects of gliadin fractions on loaf height were correlated with molecular mass, and effects on mixing time, maximum resistance to extension, and extensibility were correlated with hydrophobicity.  相似文献   

15.
Variation of polymeric proteins affects wheat end‐use quality. This research investigated associations of polymeric proteins with dough mixing strength and breadmaking characteristics in a near‐homogenous population of 139 recombinant inbred lines (RILs) derived from a cross between two hard red spring wheat breeding lines. Flours from the RILs grown at three locations were analyzed for molecular weight (MW) distribution of SDS‐extractable and unextractable proteins using size‐exclusion HPLC protocol. Correlations were calculated between mixing and breadmaking properties and HPLC absorbance data obtained a 0.01‐min retention time interval to identify protein fractions that had a significant effect on the quality traits. Very high MW polymeric proteins in the unextractable fraction had more distinct and positive associations with dough mixing strength and bread loaf volume than did other polymeric protein fractions, whereas extractable polymeric had negative influence. Consequently, the ratio of unextractable very high MW polymeric proteins to extractable polymeric proteins had greater correlations with dough mixing parameters than other HPLC absorbance area data. Covariate‐effect biplots also visually validated positive effects of unextractable very high MW polymeric proteins and negative effects of extractable polymeric proteins on mixing properties and loaf volume across three growing locations.  相似文献   

16.
A total of 162 doubled haploid (DH) lines were produced from a cross between Triticum aestivum L. ‘AC Karma’ and line 87E03‐S2B1 to study the genetic contribution of high molecular weight (HMW) glutenin subunits to gluten strength. HMW glutenin subunit composition of each DH line was determined by SDS‐PAGE. The population was grown in the field at one location in 1999 and at three locations in 2000. Gluten strength and dough mixing properties were measured by mixograph test and SDS‐sedimentation test. Variance components were estimated for each measurement to determine the variability contributed by HMW glutenin subunits. Results indicated significant environmental impact on tested mixograph parameters, SDS‐sedimentation volumes and grain and flour protein concentration. Significant main effects of Glu‐1D loci encoded subunits were obtained for mixograph development time, energy to peak, slope after peak, and first minute slope. Lines containing 5+10 combination of subunits had higher values for mixograph development time and energy to peak, while slope after peak and first minute slope were lower as compared with 2+12 containing lines. Low intergenomic interactions were observed for bandwidth energy (BWE), total energy (TEG), and SDS‐sedimentation test, involving B and D genomes only. A portion of the genetic variability for gluten strength was accounted for overexpression of Bx7 subunit originating from the cultivar Glenlea derived line 87E03‐S2B1. There was no significant effect of Glu‐A1 encoded subunits on any of the tested parameters. Estimated genetic variability for gluten strength contributed by Glu‐B1 and Glu‐D1 encoded HMW glutenins was 55% for mixing development time and 51% for energy to peak.  相似文献   

17.
《Cereal Chemistry》2017,94(5):881-886
In this study, the impact of characteristics (physicochemical, rheological, and pasting properties) of different wheat flours on the quality of frozen cooked noodles was investigated. In this sample set, results showed the cooking loss of noodles related negatively to flour swelling power. The water absorption of noodles related negatively to the dough stability time, the area, and the resistance to extension. The wheat flour with higher dough development time resulted in frozen cooked noodles with higher hardness, chewiness, and adhesiveness. Springiness of noodles correlated negatively to degree of softening. The tensile properties of frozen cooked noodles were influenced by rheological and pasting properties of wheat flours. The present study indicated high quality of frozen cooked noodles demanded wheat flours with high dough gluten strength, peak viscosity, and final viscosity and with low pasting temperature.  相似文献   

18.
Salt and eggs are common ingredients in some wheat flour‐based food systems and significantly impact dough mixing behavior. We evaluated the effect of either whole eggs, egg white, or egg yolk on dough formation and properties with the Mixograph. Inclusion of whole eggs in wheat flour dough recipes increased dough development time, dough stability, and dough strength upon further mixing less than inclusion of only egg white. In contrast, egg yolk addition decreased all of these parameters. Salt had a more pronounced impact on dough containing egg yolk than on dough containing egg white. The present observations can be explained in terms of shielding charges of the gluten protein's ionized groups, which largely affects dough mixing behavior. The work demonstrates that in some applications it can be useful to use egg fractions rather than whole eggs.  相似文献   

19.
Flours from advanced lines or cultivars of six triticales and two prime hard wheats, along with triticale‐wheat blends, were investigated for mixing, extension (excluding blends), and baking properties using microscale testing. Percentage total polymeric protein (PPP) and percentage unextractable polymeric protein (UPP) of flours and doughs, including blends, mixed to optimal dough development were estimated using size‐exclusion HPLC to determine the changes in protein solubility and association with blend composition (BC), mixing properties, and loaf height. Each triticale was blended with flours of each of the two wheat cultivars (Hartog and Sunco) at 0, 30, 40, 50, 60, 70, and 100% of wheat flour. Nonlinear relationships between BC and mixograph parameters (mixing time [MT], bandwidth at peak resistance [BWPR], and resistance breakdown [RBD]) were observed. A linear relationship between BC and peak resistance (PR) was predominant. PPP of triticale flours was mostly higher than PPP of wheat cultivars. UPP of all triticales was significantly lower than wheat cultivars. PPP of freeze‐dried doughs was mostly nonsignificant across the blends and showed a curvilinear relationship with BC. The deviations from linearity of MT and PPP were higher in triticale‐Sunco blends than in triticale‐Hartog blends. UPP of blends was closer to or lower than the lower component in the blend. The deviations from linearity for MT and UPP were greater in triticale‐Hartog blends than triticale‐Sunco blends. A highly significant correlation (P < 0.001) was observed between BWPR and loaf height. This suggested that BWPR in triticale‐wheat flour blends could be successfully used for the prediction of loaf height. Triticale flour could be substituted for wheat flour up to 50% in the blend without drastically affecting bread quality. Dough properties of triticale‐wheat flour blends were highly cultivar specific and dependent on blend composition. This strongly suggested that any flour blend must be tested at the desired blend composition.  相似文献   

20.
Mixing of commercial durum wheat semolina with water was performed under different conditions in a Brabender micromixer equipped with pastamaking shafts. Semolina filling of the mixing chamber was 30.4–42.9% (v/v), shaft speed was 10–110 rpm, temperature was 10–40°C, and hydration level was 47–52.5% (db). The blend of water and semolina evolved from individualized hydrated particles (HP) to a dough product (DP) as a function of these conditions. Torque values (T) and the specific mechanical energies (SME) were recorded during mixing as a function of time. Terms from these curves were defined to characterize the mixing process: to (starting time of dough development), td (time to reach the maximum dough consistency), Tm (mean torque value after dough development), and SMEf (total energy applied to the dough during mixing). Transformation of HP into DP and the mixing temperature were the main parameters affecting to, td, Tm, and SMEf. Protein aggregate distribution was measured by size-exclusion HPLC, protein solubility in 0.01N acetic acid, free -SH content, soluble arabinoxylans, reducing sugars, ferulic acid, carotenoid content, and oxidase activities to characterize the biochemical changes that occurred during pasta dough formation. DP was characterized by lower amounts of insoluble glutenin aggregates, lower protein solubility in dilute acetic acid, lower free -SH content, ferulic acid, carotenoid content, and lower oxidoreductase activities as compared to HP. Once the dough was developed, the effects of mixing speed, temperature, or hydration level on the biochemical composition of the blend were null or low compared to the modifications that were observed when the blends changed from HP to DP. The to and SMEf were the most significant parameters in characterizing the pasta dough mixing process in relation to biochemical changes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号