共查询到20条相似文献，搜索用时 15 毫秒
1.
The digital image displacement measurement technology and finite element data smooth were applied in the soil slope shaking table test. The displacement field and strain field were obtained from the whole vibration process. And the seismic failure mode and failure mechanism were discussed as well. The results show the deformation of soil slope increases gradually; there is shear failure from slope middle to toe and tension-shear failure at the top of slope; there forms deep arc-shaped slip surface when the slope model fails. The generalized curvature of displacement time-hisrory curve is used to judge whether the slope seismic failure is feasible. 相似文献
2.
Dangerous mountain construction projects block of high and steep slope stability is the important issue of security and disaster prevention, investigation on the surface of the dangerous mountain high and steep slope rock mass structure is the key to the analysis of the problem. The high slope of a major project of the Lancang River, the application of 3D laser scanning technique to study the long-distance survey analysis of rock mass structure analysis method to analyze the distribution of the surface space of the high and steep slope rock mass structure, statistical analysis direction of the advantages of the structure surface and the distribution of rock blocks, as the basis for the application of limit equilibrium analysis method to study the stability of rock blocks of the high and steep slope. 相似文献
3.
When tunnels are through water bearing section of fractured rock mass, a complex interaction process between rock mass deformation and fluid transportation is one of the most important reasons for water gushing, water bursting and mud bursting.To study the rock mass deformation and fluid transportation in tunnel excavation under complex geological conditions, a hydraulic model of complex crack rock mass was established from the relationship between the crack growth degree of surrounding rock in deep buried tunnel and the engineering scale, with which fracture network of different levels in rock mass could be considered simultaneously.Furthermore,a computer Fortran program was put forward to simulate the solid fluid coupling of excavation process of a deep buried tunnel.And it was found that the principal fractures had strong flowing action and network fractures had storage function and lag effect in seepage area.And the yield area of surrounding rock was increased under the coupling of seepage field and stress field. 相似文献
4.
Numerical analysis on the evolutionary features of deformation and failure modes of slopes 总被引：2，自引：0，他引：2 
下载免费PDF全文
下载免费PDF全文 The failure of slope is a gradual accumulation process. Under the effect of many interior and exterior factors, some parts in the slope reach yield with the increase of stress, and sliding surface forms gradually till complete transfixion. With continuous increase of the plastic strain, overall failure happens on the slope. Traditional analysis method cannot display the mechanic conditions and the whole process of deformation, transfixion of sliding surfaces and failure. Meanwhile, FEM strength reduction can quantitatively show the deformation features and the process of occurrence and development of sliding surface. Based on the previous researches, the paper classifies slopes according to the features of rock and soil and the slope structure. Through analyzing the graphs of deformation and the nephograms of plastic strain under different reduction factors or safety factors, the researchers can directly find the deformation tendency of slopes and the whole process of the extension, transfixion and failure of sliding surface with the reduction of safety factor. So, the failure mechanism of slope can be found intuitively, which can provide effective basis for the prevention and governance of slopes. 相似文献
5.
Tunnel portal section mostly faces unfavorable geologic and topographical conditions, such as broken surrounding rock, shallow and unsymmetrical loadings. The current Chinese code for design of road tunnel provides the load calculation method of tunnel under unsymmetrical. However, according to the mechanic and deformation characteristics of the tunnel lining on site, the assumption is not suitable for the shallow tunnel under unsymmetrical loadings in broken surrounding rock. Therefore, through engineering case analysis and results of three-dimensional numerical analysis, the failure mechanism of shallow tunnel under unsymmetrical loadings in broken surrounding rock is presented firstly, that is, deep buried side broken surrounding rocks slump down after excavation and squeeze the lining, which makes the lining deform outward and bear passive earth pressure. Through the failure mechanism, the surrounding rock mainly includes slumping area and passive area. Then the corresponding formulas are deduced based on limit equilibrium theory. Finally, a case study is adopted to verify the feasibility of the new method. It is show that the new method is more reasonable than the method of current code. 相似文献
6.
Based on dynamic time history analysis, dynamic response behavior of an un supported tunnel through fault zone which was simulated by interface and solid elements was studied under uniform input earthquake wave excitation. The analyses of response behaviors, including displacement difference, acceleration magnification, and plastic zones and so on, were carried out when earthquake wave excitation was input along transverse, longitudinal and vertical of tunnel respectively. The results show that simulation method for fault zone is effective; the earthquake causes obvious displacement difference at fault zone and surrounding rock contacting part. The maximal displacement difference reaches to 51.8mm under transverse uniform input earthquake wave excitation. And the displacement difference under vertical and longitudinal is only 44.3% and 23.1% of the transverse value, respectively; the acceleration magnification in fault zone is significantly greater than that in surrounding rock. Shear failure zone appears at the fault zone and surrounding rock contacting part, and it is especially prominent under input longitudinal earthquake wave excitation. It is proposed that fault zone has significantly influence on the dynamic performance of tunnel. The fault zone and the transitional zones are the control zones of seismic design when tunnel passes through fault zone, thus, the study on the anti seismic measures should be further strengthened. 相似文献
7.
Seismic Behavior of a Slope Protected by a Soil Nailing Retaining Wall during an Earthquake 总被引：1，自引：0，他引：1
The dynamic elastic plastic finite element method was used to study the seismic performance of a slope protected by a soil nailing retaining wall. On the basis of working in parallel and interaction between loess and a flexible retaining wall, a 3 D nonlinear finite element method (ADINA) also was established. Rational earthquake excitation and damping were discussed for geological engineering. Horizontal and vertical excitations were considered simultaneously in the analyses. A model capable of simulating the nonlinear static and dynamic elastic plastic behavior of soil was used to model the soil, and a bilinear elastic plastic model having hardening behavior was used to model the soil nailing. A friction element was employed to describe the soil structure interaction behavior. Our research focused on the seismic performance of the horizontal and vertical slope deformation, soil nailing axial force, and earth pressure subjected to horizontal and vertical excitations. The results show that the seismic performance of slope protected by soil nailing is good; soil nailing axial force increases after an earthquake; permanent slope displacement occurs during an earthquake; and the peak earth pressure distribution during an earthquake is similar to the earth pressure before the earthquake. These conclusions can provide references for seismic analyses and design in soil nailing engineering. 相似文献
8.
In order to investigate the effective seismic capacity design measures of shear wall and to realize expected failure modes under strong earthquake,the existing problems in current seismic capacity design measures are pointed out through theoretical analysis.The effectiveness of the measures of Chinese seismic design code is verified by fine finite element dynamic time-history analysis of examples.Improving measures are then put forward and are verified through example analysis.It is shown the bending ductile demand of bottom section of shear wall increases too much based on moment capacity design measures of Chinese seismic design code 2001 in the rigid foundation assumption under rare earthquake action,and its bearing capacity for vertical axis force loses;the shear capacity design measures of current seismic design code would lead to shear failure in the stores above the bottom ductility strengthening area.Some improved bending and shear seismic capacity design measures of shear wall are proposed and are verified to be effective. 相似文献
9.
以竖向荷载和水平地震作用组合下的钢筋混凝土柱和钢柱为对象,研究了失效方程中荷载相关特性对柱承载力抗震可靠性的影响。根据现行《混凝土结构设计规范》和《钢结构设计规范》分析了不同柱弯矩轴力相关曲线的特性。结合多个框架结构实例,对比了柱失效方程中荷载相关曲线与规范考虑情形的异同。实例分析表明:水平地震和竖向荷载组合作用下,小偏压RC柱和工字型钢柱的荷载相关曲线与规范考虑的情形较为符合,均近似为负相关的直线;水平地震和竖向荷载组合作用下,大偏压RC柱的荷载相关曲线则与规范考虑的情形有较大出入,存在明显的正相关段部分。在此基础上,考虑失效方程复杂特性,依据已有的荷载和抗力变量概率模型,采用Monte Carlo法分析了水平地震和竖向荷载组合作用下柱的可靠性。结果表明:钢柱和小偏压RC柱的承载力抗震可靠度随轴压力荷载效应比值的变化幅度较小,与规范模式计算结果较接近;大偏压RC柱的承载力抗震可靠度随轴压力荷载效应比值的变化会有较大幅度波动,与规范模式计算结果差异较大;当轴压力荷载效应比值为负时,大偏压RC柱的承载力抗震可靠度会低于规范计算值较多,现行柱可靠性设计方法会偏于不安全。 相似文献
10.
In order to investigate the conditions of damage and failure of concrete-filled steel tube(CFST) arch bridges, considering the structural and mechanical characteristics of CFST arch bridges, the dual damage criteria assessment models of the various components based on deformation or strength and energy were developed. The nonlinear seismic response of CFST arch bridges was analyzed by finite element method and the fuzzy evaluation method of seismic damage based on fuzzy theory and analytic hierarchy process was studied. Finally, taking a long-span CFST arch bridge as example, the damage index of the bridge was 0.150, 0.152, 0.172 and 0.318 respectively when the seismic peak acceleration was respectively 0.1g, 0.2g, 0.4g and 0.8g. The results show that the CFST arch bridge is slightly damaged under the earthquake when the seismic peak acceleration is 0.4g, and the bridge is damaged moderately when the peak acceleration is 0.8g. 相似文献
11.
为了确定强震作用下斜拉桥合理的横向抗震约束体系,以可克达拉大桥为工程背景,采用非线性时程分析法,分析了4种横向约束体系即横向滑动体系、全限位体系、位移相关型减震体系和速度相关型减震体系对强震区大跨度桥梁地震响应的影响,重点对钢阻尼器的屈服荷载和黏滞阻尼器的位置及相关参数进行优化分析,并与其他体系的地震响应进行了对比。结果表明：在强震作用下,对于大跨度桥梁横向滑动体系和全限位体系均不是理想的抗震体系;而在墩梁、塔梁之间设置减隔震装置可以有效减少横桥向的墩梁、塔梁的相对位移及地震剪力和弯矩;然而,从桥梁正常使用的角度来看,塔梁之间布设横向钢阻尼器装置优于黏滞阻尼器装置。 相似文献
12.
Finite element software was used to simulate the internal force and deformation of high-rise pile cap-soil-structure under the wave and earthquake action. Meanwhile, wave force was calculated by using Morison equation, and the mechanical behavior of structure was simulated by inputing horizontal El-Centro wave. Then, the initial state and the state of the largest positive and negative acceleration were selected to study the structure according to the time history curve, and the displacement, bending moment, shear and axial force changes of pile foundation under wave and earthquake action were discussed, which was compared and analyzed with the structural response under the action of earthquakes solely. The result shows that the moment of front row of piles is biggest, and the force of pile bolck is the most dangerous; the axial force of the corner piles is the largest, and one of the center piles is the smallest under the action of wave and earthquake. When the wave forces and seismic forces are in the same direction, the displacement, moment, and shear force of pile bolck will be increased, on the contrary, the displacement, moment, and shear force of pile bolck will be decreased. 相似文献
13.
Based on an actual project, the ABAQUS material subroutine considering damage cumulative effect and member buckling was adopted to analyze the collapse process of steel trussed arch structure. The failure mechanism and the failure mode of such structure under severe earthquake conditions were studied. The results indicated that, under the action of severe earthquakes, the cumulative damage increased and structural stiffness declined, which leading to the structure failure. The damage cumulative effect caused the decrease of the member stress and the increase of nodal displacement and member strain. Subjected to seismic waves, the webs at the columns of the middle main truss failed at first; then the failure region extended along the out-of-plane direction of the main truss and extended from the column foot to the top of structure. After the earthquake, the webs at the one-quarter point of the main truss and the webs at columns with large slenderness ratio buckled. It will lead to early failure of part members if member buckling is considered. However, it has little effect on the failure mode of structure. 相似文献
14.
Seismic performance of first floor corner joints of high-rise reinforced concrete frame structure 总被引：1，自引：0，他引：1
Crushing risk of corner column will increase substantially due to first floor corner joint shear failure of high-rise reinforced concrete frame structure under bi-directional loading and high axial compressive load caused by earthquake action. Therefore, 相似文献
15.
Based on the elastic theory, an analysis can be made on stress and plastic deformation under tunnel excavation and shotcrete support.FLAC 3D can be used to simulate the mechanical behavior of excavation and support, getting the deformation of surrounding rock stress and plastic without support and shotcrete. The results show that, the prestress applied on the anchor equals to the supporting force when the tunnel plastic zone disappears. This support improves the self bearing capacity of surrounding rock, effectively suppresses the expansion of the plastic zone after the tunnel excavation, and prevents further damage to the tunnel surrounding rock. 相似文献
16.
Perilous rock is a dominant geological hazard in Three Gorges Reservoir area of P. R. China. The Taibaiyan cliff at Wanzhou is a representative case of massive perilous rocks in the area. Using this cliff as an example, the conditions triggering massive perilous rocks were studied and described. This included examining the following three conditions: alternating layers of mudstone and sandstone; steep landforms such as cliffs or scarps; and intense rainfall. The massive development mechanism for perilous rocks was discussed, including micro chained pattern gradual and interval evolution from the bottom to the summit of the cliffs individually as perilous rock, and a macro chained pattern evolving stage by stage from the cliff face backward up the mountain. In some respects, rock cells below sandstone in cliffs serves as the pulsating valve of the massive development mechanism for perilous rock. In any micro chained pattern, perilous rock situated on summits is the easiest to rupture due to the fissure pressure. For any single perilous rock, two load compositions were derived. In addition, methods for analyzing perilous rock stability were established in detail using the limit equilibrium principle. Two key techniques, a union scheme that both supports and anchors and a union scheme that nails and anchors, are proposed in light of the massive development mechanism for perilous rock. 相似文献
17.
采用消(耗)能元件的结构在遭受地震作用时,元件芯材首先屈服进入塑性阶段,利用其滞回变形消耗地震输入能量,保护主体结构,元件芯材本构关系的数值模拟是对采用消(耗)能元件结构进行抗震分析与设计的基础。为更真实地模拟结构消(耗)能元件芯材在单调和循环荷载下的本构响应,更准确地对采用消(耗)能元件结构进行结构弹塑性地震响应分析,对常用作消(耗)能元件芯材的日本高延性钢材SN490B的单调、循环加载本构及循环骨架曲线进行了数值模拟,包括：采用Esmaeily-Xiao二次流塑性模型模拟材料在单调荷载作用下弹性段、屈服段、强化段和二次流塑段4个阶段;采用混合强化模型模拟材料循环荷载作用下的本构响应,运用大型通用有限元软件ABAQUS结合数值模拟参数对16种不同循环加载制度下的循环加载试验进行模拟,并与试验结果进行对比;采用Ramberg-Osgood模型、无量纲化的Ramberg-Osgood模型及两段式模型模拟循环骨架曲线。研究结果表明：所采用数学模型可以较好地模拟SN490B钢材单调、循环加载本构响应及循环骨架曲线,数值模拟与试验结果拟合较好。 相似文献
18.
As one of common reinforcement measure, cement mix pile is widely used in soft ground treatment of road widen project, while relevant studies on reinforcement range is insufficient. According to the one side road widening project, the cross-section of deep soft ground is analyzed. When fill is simplified as trapezoid load, the conclusion that reinforcement depth of cement mix pile should greater than load breadth can be gained by addition stress distribution. Based on the numerical simulation of different reinforcement measures, the slope stability, road settlement and horizontal deformation are influenced greatly by reinforcement range. Comparison research indicates that when the soft ground from slope toe to road shoulder is strengthened, the improvement effect is obvious. The numerical simulation and field monitoring resules show that reinforcement measure is suitable. Meanwhile, this study can provide reference to similar project. 相似文献
19.
Rock is a kind of physical nonlinear complicated medium, under deep buried condition the surrounding rock system deformation shows geometrical nonlinear characteristic, and the interaction between the two nonlinear mechanism makes the unloading of surrounding rock system evolving complexly. Based on the Lagrangian method and large deformation caculation method, both the double nonlinearity and nonlinear dynamics character of deep buried tunnel surrounding rock system under unloading are studied. The numerical model results show that the Kolmogorov entropy has been extracted from the evolution data in the unloading process of surrounding rock system. The analysis indicates that the typical chaos character has been demonstrated in the process of unloading for deep buried tunnel surrounding system and the rock mass energy dissipation is analyzed at the stage of unloading. 相似文献
20.
Perilous rock is a type of geological disaster in mountainous areas. Research concerning perilous rock ruptures focuses on the expanding of control fissures in perilous rock under load action. Taking the control fissure in perilous rock as one crevice in a sample, a method employing fracture mechanics is established to calculate the union fracture strength factor along the rupture orientation at the terminus of a control fissure in perilous rock. The union fracture strength factor is a function of both the first and second type fracture strength factors. We define the ratio between the fracture tendency of rock and the union fracture strength factor as the stability coefficient of perilous rock. Further, it simplifies the rupture mechanism of sliding, falling, and toppling perilous rock as pressure shear and tension shear ruptures. We establish methods for calculating the first and second type fracture strength factors. The applications show that the stability status identified by the method is more reasonable and sensitive. 相似文献