首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
The aim of this study was to compare measurements of the medial and lateral claws of the hind feet in cattle, and to establish reference values to aid in functional claw trimming. Variables of the medial and lateral claws of 40 hind feet obtained from 40 slaughtered German Simmental cows were measured. To standardise the observations the soles of both the medial and lateral claws were first trimmed to a defined thickness of 5mm at the apex and 8mm at the heel, before measurements were taken. After this standardisation, the mean lengths of the dorsal walls of the two claws were not significantly different (means, lateral 76.8, medial 77.1 mm). However, there were considerable other differences. For example, the soles of the lateral claws were significantly (P < 0.01) longer (means, 120.1mm versus 112.7 mm, and wider (means, 52.0 mm versus 42.5 mm). In 36/40 feet, the sole of the lateral claw protruded approximately 2-3mm above the sole of the medial claw after the standardisation. The soles of the lateral claws were therefore then trimmed to the height of the medial claw ("levelling") and the measurements were repeated in the lateral claws. The dorsal wall of the lateral claw was then significantly shorter than that of the medial claw (means, 74.8 mm versus 77.1 mm) and, most importantly from a functional point of view, the sole was significantly thinner than that of the medial claw (means, 2.71 mm versus 5mm at the toe tip, 4.9mm versus 8 mm at the heel). Finally, the horn capsule of all claws was removed and various measurements of the corium surface were made. The length of the dorsal corium surface did not differ statistically (P > 0.05) between the lateral (mean, 62.6 mm) and medial (mean, 62.5 mm) claws. Strict adherence to the principles of functional trimming thus reduces the thickness of the sole, the length of the dorsal wall and the length and height of the bulb of the lateral claw. This suggests that the sole of the medial claw should be left an extra 3 mm thicker than previously recommended such that, after "levelling", the sole of the lateral claw remains thick enough to protect fully the corium and the claw retains a more normal shape.  相似文献   

2.
In 56 heifers of the three breeds German Holstein (GH), German Brown (GB) und German Red (GR) the body weight and height were determined at the age of 350 to 550 days in intervals of 6 to 8 weeks. At the right front limb and the left hind limb the claw measurements dorsal wall length, diagonal length, heel length and height, the angle of the dorsal wall and the hardness of the claw were taken. Furthermore, the punctual pressure under the medial and the lateral claw of the right front limb and the left hind limb were determined using an electronic measuring system. The GH heifers weighing 387.3 kg on an average and having a mean height of 132.3 cm at the sacral bone in the course of the present study were the heaviest and tallest breed at the age of 12 to 18 months. GB had a weight of 366.2 kg and 106.2 cm height at the sacral bone. The GR were the smallest breed (126.0 cm) and weighed 337.7 kg. The heel at the front limb was on the average 1 cm shorter than at the hind limb and it was 0.5 cm lower. The angle of the dorsal border was 4-5 degrees higher at the hind limb. The GR had the flattest claws. The animals showed a larger average weight load on the medial claws than on the lateral claws especially of the front limbs. The highest pressures per cm2 were found underneath the rear part of the medial claw in all breeds. At the front limb, the GB showed significantly higher average pressures per cm2 under the front sectors of the claws than GH and GR, while the other values did not differ significantly between the breeds. The GH tended to have lower average pressures per cm2 underneath the claws of the hind limb, but this was only significant at the front medial sector of the claw.  相似文献   

3.
In 58 female calves of the three breeds German Holstein (GH), German Brown (GB) and German Red (GR) the body weight and height were determined at the age of 79 to 188 days. At the right front limb and the left hind limb the following claw measurements were taken: dorsal border length, diagonal length, heel length and height, angle of the dorsal border and hardness of the claw horn. Furthermore, the punctual pressure under the medial and the lateral claw of the right front limb and the left hind limb were determined using an electronic measuring system. The GH calves weighing 136.8 kg were heavier than GB, which was the tallest breed with 106.2 cm height at the sacral bone. GR calves were the smallest (99.1 cm) and weighed 121.1 kg. The length of the diagonal and the angle of the dorsal border were smaller at the hind limb of all breeds which resulted in a smaller area of ground surface for the claw of this limb. The GR calves had the longest and flattest claws. The GB showed the highest pressures per cm2 at the front limb with 25.6 N/cm2 under both claws as well as at the hind limb with 26.7 N/cm2. The AR had the smallest pressure load with 20.8 N/cm2 at the front limb and 20.2 N/cm2 at the hind limb. The animals showed a larger relative weight load and area of ground surface on the medial claws of the front and hind limbs than on the lateral claws. The highest pressures were found underneath the rear part of the medial claw in all breeds. GB calves showed the highest average pressures (33.3 N/cm2 at the front limb) while GR calves had the lowest (26.3 N/cm2 at the hind limb). GR calves had the highest claw hardness at all measuring positions.  相似文献   

4.
  相似文献   

5.
OBJECTIVE: To determine whether ultrasound could be used to measure sole horn thickness in dairy cattle after claw trimming with an adaptation of the Dutch method. DESIGN: Case series. ANIMALS: 24 adult Holstein dairy cows. PROCEDURE: Cows were restrained in a standing position, and claws were trimmed with an adaptation of the Dutch trimming method. B-mode ultrasonography was then performed. The transducer was placed on the sole just caudal to the apex of the toe and immediately medial and parallel to the abaxial white zone. The inner margin of the sole was identified as a thin hyperechoic line. Soles were considered to be too thin if sole horn thickness, determined by use of ultrasonography, was < 5 mm. RESULTS: Sole horn, underlying soft tissues, and the distal surface of the third phalanx were imaged in 151 claws. The inner margin of the sole could not be identified in 4 claws, and 37 claws could not be imaged because cows collapsed in the restraining chute. Mean +/- SD sole thickness for all claws was 71 +/- 1.3 mm. Only 1 sole was < 5 mm thick. The lateral front claws were significantly thicker than the medial hind claws. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that ultrasound imaging can be used to determine sole thickness in dairy cattle after routine claw trimming.  相似文献   

6.
There are a number of differences between the claws of the front and hind limbs in cattle concerning macroscopic shape, chemical and physical properties of claw horn and epidemiological data. Front claws have superior data in almost every respect. Virtually no information is available on the mechanical stability of the suspensory apparatus of the third phalanx. It was the objective of this study to develop a method to measure the maximum strength (N/mm2) of the suspensory apparatus of the bovine distal phalanx. This apparatus includes all layers of tissue such as bone, corium, corioepidermal junction and wall horn. The feet of 13 clinically healthy beef bulls were collected from the local abattoir. Testing was performed in three locations of the wall segment (dorsal, abaxial, axial) in a material testing machine. The corium and the corioepidermal junction were set under increasing tension until failure occurred. Maximum stress was recorded. The values ranged between 2.47-3.13 N/mm2 (dorsal), 4.08-4.87 N/mm2 (abaxial) and 2.27-2.66 N/mm2 (axial). No differences could be validated statistically between front and hind claws and between lateral and medial claws respectively. Abaxial ultimate stress values were significantly higher than dorsal and axial ones. Between the two a statistical difference could not be validated. Most of the specimens (57.1%) were torn apart at the corioepidermal junction, almost a quarter of the samples (27.6%) were to a degree disrupted at the corioepidermal junction and to a certain extent in the deeper layers of the corium. A few samples showed disruption within the horn (11.5%) or at the attachment of the third phalanx (3.8%). Biomechanical features of the experimental set-up are discussed. The biological significance of these findings is that the body weight and the additional dynamic loading is predominantly taken over by the abaxial part of the claw, while the dorsal and axial aspects are less loaded.  相似文献   

7.
Ultrasonographic imaging and thickness measurements of sole horn and underlying soft tissue layer were evaluated in 100 bovine claw specimens. The claws were trimmed and examined in longitudinal planes using a 7.5 MHz linear transducer. The sole horn, underlying soft tissue layer and distal surface of the distal phalanx of all claws were clearly visualized. The sole horn had a heterogeneous hypoechoic appearance; the underlying soft tissue layer was predominantly anechoic. Corium and subcutis could be differentiated. The best imaging of these structures was achieved in claws with less than 10 mm sole horn thickness and soft sole horn. Imaging of the dorsal wall structures was more difficult. In each claw, B- and A-mode measurements of horn thickness of sole and dorsal wall and distance from outer claw surface to distal phalanx surface were made at three marked points on the weightbearing surface and at one point on the dorsal wall. In 10 claws, CT-images were taken and the horn density was determined. All claws were then frozen, transected and anatomical reference measurements were made after thawing. Statistical correlation coefficients of 0.88 and higher were found for B-mode ultrasonographic and anatomical measurements of sole horn thickness. A-mode proved not to be useful for the sole horn thickness measurement. B-mode ultrasonography was carried out successfully in the claws of five living cattle.  相似文献   

8.
To evaluate the manner in which a cow's claws make contact with the ground at the walk, the gait, and in particular the claw-ground contact pattern, were studied in 12 healthy, lactating dairy cows, using high-speed cinematography (500frames/s) while the animals were walking on a treadmill. The results showed that the limbs were advanced around the contralateral limbs in a sigmoid curve. The feet contacted the ground with the foot axis and the tips of the claws rotated slightly outwards. In all cows the lateral claws contacted the ground before the medial claws in the hindlimbs, and in 10/12 cows in the forelimbs. The heel of the lateral claws was the region of initial contact with the ground in the hindlimbs of all cows and in the forelimbs in 9/12 cows. Lateral 'heel first' contact in the fore and hindlimbs appeared to be the normal gait pattern in these animals. Compared with a previous study of heifers, lactating cows had a larger step width in the hindlimbs and a smaller step width in the forelimbs. These ground contact patterns offer an explanation for the predisposition to claw disorders of the lateral claw of the hindlimb. The results of this study reinforce the suggestion that soft floor surfaces should be provided for cattle to prevent mechanical injury to the claws.  相似文献   

9.
Hind claws of 15 adult, sound Fleckvieh cows were used for material analysis. The elastic modulus was tested in tension tests according to EN ISO 527 and ASTM D 638-03 at a universal material testing machine. Samples were taken from different segments of the bovine claw to find the differences in material properties. Samples orientation was parallel to the horn tubules and transversal, respectively. Dry matter of the test samples was determined at the time of testing. Elastic modulus values were highest with mean = 659.7 N/mm2 at the dorsal wall. Values dropped axial to 416.3 N/mm2, abaxial to 343.9 N/mm2 for longitudinal (parallel) samples and to 433.1 N/mm2 for transversal samples. The elastic modulus of the sole segment was found to be 172.1 N/mm2. No difference was calculated neither between right and left feet, lateral and medial claws, nor between longitudinal and transversal samples.  相似文献   

10.
The lengths of the digital bones of the fore- and hind-limbs obtained post mortem from 40 cattle of different ages were measured using digital radiographs. The lengths of the individual digital bones and the overall length of the digit were determined using computer software. The lateral metacarpal/metatarsal condyle, and lateral P1 and P2 were significantly longer than their medial counterparts, whereas P3 of the medial digit was longer than its lateral partner. Measured from the cannon bone epiphysis to the tip of the pedal bone, the mean increased length of the lateral digit was 0.8 mm in the fore- and 1.5 mm in the hind-limb. When the lengths of the digital bones were summed, the mean length of the lateral digit was 1.8 mm longer in the fore-limb and 2.1 mm longer in the hind-limb. Based on these findings, it can be concluded that the lengths of the paired digits differ in cattle. The majority of cattle have longer lateral digits in the fore- and hind-limbs. This asymmetry might explain why the lateral hind-limb claws are predisposed to sole ulcers on hard surfaces. In the hind-limbs, the impact is transferred from the pelvis directly to the longer lateral digit. In the fore-limb claws, the tenomuscular attachment to the trunk may be involved in a more even weight distribution and in a shift of weight to the medial claw.  相似文献   

11.
Racehorses in New Zealand predominantly train counter clockwise. This training pattern has been associated with between forelimb differences in bone mineral density profile and asymmetrical limb loading after training. At present, there is limited data on the hoof conformation of these racehorses. Distal forelimb and digital hoof conformation data were collected from 75 Thoroughbred racehorses (2–5 years old) from two training yards. Digital conformation was subjectively graded, and multiple hoof measurements were made with a modified tire gauge (sole and sulci depth) and from digital photographs. All the horses were shod by two registered master farriers within a median of 15 (interquartile range [IQR], 1–25) days before measurement. There were few distal limb conformation abnormalities scored. Most (62/75) horses presented with some deviation from normal hoof parameters, with 2 (IQR, 1–3) abnormalities reported per horse. The most common hoof abnormality was uneven sulci, which was identified in 43 horses and 59 affected hooves, followed by higher medial hoof wall height in 38 horses and 53 affected hooves. Many of the linear and hoof angle measurements and their ratios were within the bounds reported within the literature and indicative of a balanced foot. The length and width measurements increased with horse age. The dorsal hoof wall (DHW) length:heel length ratios were consistently less than 3:1, and the absolute difference between toe and heel angle was generally greater than 5°. Between limb hoof variation was identified for a number of the morphologic measurements including frog length and sole length and the ratio of sole width:sole length. Flat feet (lack of concave solar surface) were identified in 21/75 (28%) horses and in 28/150 (19%) forelimb hoofs. More horses had a flat left foot (10/75) than right foot (4/75), but seven horses had both feet classified as being flat. Flat feet had 2.4 (1.1–5.6, P = .036) greater odds of presenting with uneven sulci. These data indicate that uneven sulci depth and flatter hooves with may be a typical presentation of Thoroughbred feet. Asymmetry in measurements between limb may reflect the greater loading of the left forelimb when race training counter clockwise.  相似文献   

12.
The thickness of the subsolar soft tissue layer (dermis and subcutaneous tissue) of the hind lateral and medial claws of 23 Holstein dairy cattle was measured by ultrasound imaging. The results showed that on average the subsolar soft tissue layer of the lateral hind claw was significantly thicker (4.29 mm) than that of the medial hind claw (3.92 mm).  相似文献   

13.
Hardness of bovine hoof horn was tested as ball indentation hardness and as shore D hardness post mortem in different segments of the hoof wall, in the sole and the hard bulb of sound claws of 10 Austrian Holstein Friesian cows. Both methods of hardness determination showed corresponding results, with shore D hardness between 52.2 and 63.9 hardness units (hu) and ball indentation hardness between 11.2 N/mm2 and 24.3 N/mm2. Bovine hoof horn becomes significantly softer from the coronary band towards the weight bearing border (vertical decrease) and from the dorsal wall towards the heel (horizontal decrease). Decreasing hardness was associated with decreasing dry matter content. Measurements of the claw capsule showed thickness of the hoof wall increasing from the coronary border towards the sole. In dorsopalmar/-plantar direction, bovine hoof wall at the weight bearing border decreases towards the heel.  相似文献   

14.
The vascular organisation of the hind limb claws from clinically normal cattle was studied using plastic corrosion casts. The proper digital artery ran dorsodistally within the interdigital space and gave off a bulbar branch to the bulb, a plantar branch to the axial aspect of the wall and sole, and a coronary artery to the coronary margin and proximal wall. The artery entered the distal phalanx at the axial foramen, coursed through the nutrient canal as the terminal arch, and emerged at the abaxial foramen to anastomose with branches of the bulbar artery. During its interosseous course, the terminal branch gave off 6-8 primary branches which provided the arterial supply to the coronary margin, axial and abaxial wall, white zone and sole. The dorsal proper digital vein and axial and abaxial proper plantar digital veins drained all venous blood from the claw. Each of these large veins arose from numerous smaller veins which joined to form the venous networks of the coronary margin, wall, sole and bulb. A large arched vein passed through the coronary cushion and formed a connection between the superficial coronary venous plexus and the intra-osseous plexus of the distal phalanx. The axial and abaxial proper plantar digital veins were connected by a vessel through the bulbar cushion. At the same level, the axial proper plantar digital veins of the lateral and medial claw were connected to each other by a large vessel through the interdigital space, situated just proximal to the distal interdigital ligaments. This resulted in the presence of a complete distal venous arch along the plantar aspects of both claws. The parietal collecting veins drained most of the venous blood from the sole, white zone and wall, and connected directly to the venous plexuses of the coronary margin and bulb. Valves occurred commonly in medium and larger calibre veins throughout the claw.  相似文献   

15.
The purpose of this study was to observe and quantitate changes in the claws of two groups of feedlot cattle (calves and backgrounded yearlings) fed diets that varied in energy (73.5 or 78.5% TDN) and crude protein (11, 13, 15, 16, 17, or 19%) content. At slaughter, the thickness of sole horn and the prevalence of toe and heel hemorrhages were greater in calves than in yearlings (p<0.02). Feeding the high-energy ration increased the prevalence of toe and heel hemorrhages in calves (p<0.02) and heel hemorrhages in yearlings (p<0.02). In yearlings, rotation of the distal phalanx and ridging of the dorsal wall of the claw were the most prominent pathological features. Osteopathy of the apex of the distal phalanx occurred more frequently in calves than in yearlings (p<0.01). This study suggests that intensive feeding of beef cattle before they reach 14 months of age has a deleterious effect on digital health.  相似文献   

16.
This study aimed to compare thickness of the capsule, corium, and soft tissues measured ultrasonographically and macroscopically in selected regions of bovine claws. A hundred and twenty claws (n = 120) of 15 healthy Holstein bovines were obtained. After cleaning the claws, ultrasonographic measurement of the capsule, corium, and soft tissues was performed while submerging the claws in a water bath. Macroscopic measurements were taken after cutting of the claws axially. These values were compared statistically. According to the macroscopic measurements, the mean thickness ± standard deviation (SD) of the capsule for dorsal wall and sole was 6.2 ± 0.1 and 9.5 ± 0.4 mm, respectively. The thickness of the corium and soft tissues for dorsal wall and sole was 4.5 ± 0.1 and 5.3 ± 0.1 mm, respectively. Ultrasonographically, the mean thickness ± SD of the capsule for dorsal wall and sole was 4.7 ± 0.1 and 7.8 ± 0.3 mm, respectively. The thickness of the corium and soft tissues for dorsal wall and sole was 4.3 ± 0.1 and 5.9 ± 0.2 mm, respectively. Findings demonstrated that ultrasonography can be reliably to measure of the thickness of the hoof capsule, corium, and soft tissue in bovine claw.  相似文献   

17.
The object of this study was to develop a simple method for accurately calculating the volume of bovine claws under field conditions. The digits of 30 slaughterhouse beef cattle were examined and the following four linear measurements taken from each pair of claws: (1) the length of the dorsal surface of the claw (Toe); (2) the length of the coronary band (CorBand); (3) the length of the bearing surface (Base); and (4) the height of the claw at the abaxial groove (AbaxGr). Measurements of claw volume using a simple hydrometer were highly repeatable (r(2)= 0.999) and could be calculated from linear measurements using the formula:Claw Volume (cm(3)) = (17.192 x Base) + (7.467 x AbaxGr) + 45.270 x (CorBand) - 798.5This formula was found to be accurate (r(2)= 0.88) when compared to volume data derived from a hydrometer displacement procedure. The front claws occupied 54% of the total volume compared to 46% for the hind claws.  相似文献   

18.
Claw disorders cause problems in dairy cattle all over the world. Nutrition, feeding, environment, claw trimming routines, hormonal changes related to calving and genetics are among the factors which influence the pathogenesis. The colour of the claw horn (pigmentation) has been suggested to play a role. The aim of this study was to investigate if there were any associations between the colour of the sole horn and claw disorders detected at claw trimming. Altogether, 2607 cows on 112 farms were claw trimmed once and the colour (dark, mixed or light) of the right lateral hind claw and hind claw disorders were recorded by 13 trained claw trimmers. The data were analysed using logistic regression models with logit link function, binomial distribution and herd and claw trimmer as repeated effects, with herd nested within claw trimmer. Haemorrhages of the sole (HS) and white line (HWL) were more frequently found in light than in dark claws (OR = 2.61 and 2.34, respectively). Both HS (OR = 1.43) and corkscrewed claws (OR = 1.84) were slightly more prevalent among cows which had claws with mixed colour versus dark claws. There were no significant associations of other claw disorders with claw horn colour.  相似文献   

19.
Approximately 88% of Norwegian dairy cattle are housed in tie stalls. Free-stall housing will be implemented for all cattle within 20 years. This means that most existing barns have to be rebuilt in the near future. We designed our study to estimate the prevalence of claw lesions in Norway and to reveal possible differences between tie stalls and free stalls. Fifty-five tie-stall herds and 57 free-stall herds were sampled by computerized systematic selection and 2665 cows were trimmed by 13 claw trimmers, during the late winter and spring of 2002. The claw trimmers had been taught diagnosing and recording of claw lesions. Environmental factors, management and feeding routines also were recorded. Forty-eight percent of cows housed in tie stalls had one or more claw lesions versus 71.8% in free stalls. Prevalences recorded in the hind claws were: 4.2% of the animals had dermatitis in tie stalls versus 5.7% in free stalls; 7.9% versus 38.0% had heel–horn erosions; 7.3% versus 13.6% had haemorrhages of the white line; 11.7% versus 20.4% had haemorrhages of the sole; 2.8% versus 3.2% had sole ulcers and 5.5% versus 9.7% had white-line fissures. Most lesions were mild. A model was designed to estimate cluster effects within herd and within claw trimmer. The cluster effect within herd was significant for all lesions. The cluster effect within claw trimmer was only significant for heel–horn erosions in front and hind claws and for white-line fissures in front claws. Agreements between some of the claw lesions were revealed. The study confirms that in Norwegian dairy cattle, most claw lesions are more prevalent in free stalls than in tie stalls.  相似文献   

20.
A survey of the incidence of lesions causing lameness in dairy cattle was conducted by veterinarians in 9 practices in Queensland between November 1984 and July 1985. One hundred and eighty five cases were treated in 83 dairy herds. The average incidence of lameness which required treatment by veterinarians was 2.7 cases per 100 cows per 9 months, with a range of 1.4 to 5.5% in the 9 practices. Foot lesions constituted 83.2% of all lesions; the most common being interdigital necrobacillosis (15%), deep sepsis (8.9%), white line disease (8.4 per cent), axial groove fissure (8.4%), bruised sole (5.6%) and foreign body in the sole/heel (5.6%). Sixty-five per cent of foot lesions occurred in the hind feet and 63% of these lesions occurred in the lateral claw, while 37% of foot lesions occurred in abnormally shaped claws. Limb lesions accounted for the remaining 16.8% of lesions, and 50% of these lesions occurred in the hip and stifle, while trauma was the main cause of limb lesions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号