首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
根据我国本门制造企业现状,结合木门定制生产工艺的特点,提出3种典型的木门门扇自动化生产线布置方案,可实现木门门扇板坯上下料、输送定位、定尺锯切、封边、五金忤孔槽加工、铣削成型等加工过程的自动完成,为提升企业木门自动化制造水平提供参考.  相似文献   

2.
锯片锯料角对锯切表面粗糙度影响机理分析   总被引:3,自引:0,他引:3  
分析了锯料角影响锯切表面粗糙度的机理,阐述了锯料角与锯料量对锯切表面粗糙度的影响。分析结果表明,只要锯料角不变化,则锯料量的变化对锯切表面粗糙度不起任何作用。锯料角影响锯切表面粗糙度的机理为开发新型锯片、提高锯切表面的质量和锯切效率提供依据。  相似文献   

3.
影响框锯锯切粗糙度的机理初探   总被引:1,自引:0,他引:1  
推导出了框锯锯痕深度公式。该公式表明,齿距、锯料角、锯切速度以及进给速度等因素是影响框锯锯痕深度的主要因素。并分析了各因素对锯切粗糙度的影响机理。在结论中指出,框锯同样有每齿进给量与锯切表面粗糙度相互矛盾这一问题,解决的途径是减小锯料角的角度。  相似文献   

4.
零锯料角带锯的锯切机理探讨   总被引:2,自引:1,他引:1  
推导了带锯锯痕深度理论值计算公式。公式表明:每齿进给量和锯料角对锯痕深度都有影响。当锯料角等于零度时,锯痕深度的理论值为零。分析了每齿进给量影响锯切表面质量的机理,给出了零锯料角带锯的定义并论述了其特性。零锯料角带锯是换代的新型带锯,可以实现高效率、高质量和低成本锯切木材,并能提高制材的出材率和木材的利用率。  相似文献   

5.
木门加工装备的自动化水平直接影响木门的生产效率和产品质量,并决定企业的竞争力.笔者依据国内木门自动化制造领域丰富的实践经验,对我国木门自动化制造的特点及未来发展趋势进行了分析,为木门生产企业加工装备升级提出建议.  相似文献   

6.
简述木材锯切技术所经历的手工期、简单机械期、近代期和现代期及其特点,对各种木材锯切技术进行了分析,结论是零锯料角木工锯子技术整体性能较好,可以实现高质量、高效率、高效益锯切木材.  相似文献   

7.
近年来,随着我国木门自动化制造水平的不断提高,木门生产定制化与制造自动化的矛盾得到缓解,在自动化制造理念、加工工序以及生产工艺等方面的创新层出不穷。围绕我国木门制造特点,总结我国木门自动化制造的新动向,为提升我国木门行业的技术与装备水平提供借鉴与参考。  相似文献   

8.
径切板具有在宽度方向(即原木的径向)干缩率小,尺寸稳定,变形小和不易开裂的优点.故其在乐器、航空、仪器、建筑、家具、地板以及门窗制造等场合得到大量应用.为了提高木材的使用价值,在制材时应尽可能多的制取径切板.比较典型的径切板制材下锯法有:径向下锯法、星型下锯法和梯形下锯法.  相似文献   

9.
【目的】分析锯齿侧刃参数对锯切表面粗糙度的影响,通过优化锯齿侧刃参数,解决圆锯锯切时进给速度提高与表面粗糙度增大之间的矛盾,为新型木工圆锯片设计提供参考和指导。【方法】提出微量零径向侧后角锯齿的概念,使用9种不同锯齿侧刃参数的圆锯片,以水曲柳和高密度纤维板为对象进行锯切试验,研究不同进给速度下径向侧后角和零径向侧后角段对锯切表面粗糙度的影响。【结果】随着进给速度增加,锯切表面粗糙度增大,径向侧后角减小,锯切表面粗糙度降低,无零径向侧后角段锯齿锯切形成的表面粗糙度均高于具有零径向侧后角段锯齿,特别是当零径向侧后角段由0 mm增加到0.5 mm时,锯切表面粗糙度下降最为明显。当零径向侧后角段大于0.5 mm时,侧刃的零径向侧后角段具有"以锯代刨"的作用,与零径向侧后角锯齿相比同样可起到改善锯切表面质量的作用。【结论】锯切表面粗糙度一定程度上取决于锯痕深度。在实际锯切过程中,仅有长度近似等于每齿进给量的锯齿侧刃部分参与切削,占侧刃总长度的很小一部分,微量零径向侧后角锯齿中零径向侧后角段长度比每齿进给量略大且越接近每齿进给量越理想。具有微量零径向侧后角段锯齿的圆锯片与零径向侧后角锯齿相比,同样可起到改善锯切表面质量的作用;在保持其他切削参数不变的情况下,微量零径向侧后角段锯齿还可以减小锯齿侧刃与锯路壁之间的摩擦。  相似文献   

10.
木门加工装备的自动化水平直接影响木门的生产效率和产品质量,并决定企业的竞争力。笔者依据国内木门自动化制造领域丰富的实践经验,对我国木门自动化制造的特点及未来发展趋势进行了分析,为木门生产企业加工装备升级提出建议。  相似文献   

11.

In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads.  相似文献   

12.

The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage.  相似文献   

13.
Contour hedgerows of multipurpose tree species in the sloping tea lands of Sri Lanka are expected to reduce soil erosion and also add significant amounts of plant nutrients to the soil via periodic prunings. The objective of this experiment was to characterize the biomass decomposition pattern and quantify the amount of nutrients added through prunings of six tree species (Calliandra calothyrsus, Senna spectabilis, Euphatorium innulifolium, Flemingia congesta, Gliricidia sepium and Tithonia diversifolia) currently being used in hedgerows associated with tea. Withered leaf and stem prunings (50 g) were enclosed in 2-mm litter bags, placed at 5-cm depth and retrieved after one, three, six, nine and 12 weeks. Loss of initial dry weight, N, P and K was measured. Single exponential decay function adequately described both dry weight and nutrient loss. Tree species differed significantly in their rate of breakdown with decomposition constants (k) varying from 0.0299 to 0.2006 week−1 for leaves and from 0.0225 to 0.0633 week−1 for stems. Gliricidia showed the highest k for leaves with the rest in the following descending order: Senna > TithoniaEuphatorium > Calliandra > Flemingia. A similar pattern was observed for loss of all nutrients with Calliandra and Flemingia always having lower k values than the rest. Although N immobilization was not observed, immobilization of P and K was observed during the first week of incubation in some species, particularly in stem prunings. Annual biomass of prunings differed significantly between tree species in the following descending order: Calliandra > Senna > Flemingia > Tithonia > Gliricidia > Euphatorium. Calliandra added the greatest amount of nutrients annually to the soil with Euphatorium adding the least. Calliandra prunings provided the annual total K requirement and 49% of the N requirement of mature tea. However, none of the species provided more than 5% of the P requirement. It is concluded that among the tree species tested, Calliandra and Flemingia are the most suitable for contour hedgerows in tea plantations of this agroclimatic region because of their higher soil nutrient enrichment capacity and slower decomposition rates which would minimize leaching losses. This revised version was published online in June 2006 with corrections to the Cover Date.  相似文献   

14.
Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered.  相似文献   

15.

The effects of seed weight and seed type on seedling growth of Pinus sylvestris (L.) were studied by seeding individually weighed orchard and stand seed in different mixtures under harsh (direct seeding in field) and optimal (seeding in nursery) conditions. In the nursery experiment an increase in the seed weight from 3 to 7 mg increased the seedling height by 10-27% and total weight by 27-113%, and decreased the height/diameter ratio by 5-6% after 2 yrs. With elimination of seed weight effects, orchard seedlings were 2% taller than stand seedlings in year 2. Without elimination of seed weight effects, orchard seedlings were 7-13% taller. In the field experiment an increase in the seed weight from 3 to 7 mg increased seedling height by 18-65%, stem volume by 81-274% and the number of top-buds by 23-34% in year 5. After elimination of seed weight effects, orchard seedlings were 7-13% taller than stand seedlings and without elimination of seed weight effects 20-21% taller after 5 yrs. Even after elimination of both seed weight and genetic effects orchard seedlings were 3-9% larger than stand seedlings in the field experiment. In conclusion, the influence of seed weight and seed type on growth traits and slenderness is highly significant and the influence seems to be greater in harsh conditions.  相似文献   

16.

This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland.  相似文献   

17.

The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions.  相似文献   

18.
本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。  相似文献   

19.
Baobab leaves form an important part of the local diet in Sahel countries and elsewhere in Africa. Existing leaf nutritional data and agroforestry performance information are based solely on Adansonia digitata L., the baobab of continental Africa. The introduction potential of Adansonia species from the center of diversity in Madagascar and from Australia remains untapped. To assess this potential, the mineral contents and B1 and B2 vitamin levels of dried baobab leaves were determined for five-year old trees of A. digitata, A. gibbosa (A. Cunn.) Guymer ex D. Baum, A. rubrostipa Jum. & H. Perrier (syn. A. fony Baill.), A. perrieri Capuron and A. za Baill. grown in an introduction trial in Mali. Nutritional data were evaluated against survival and vigor to identify promising germplasm. Leaf vitamin and crude protein contents were highest in the Madagascar species, especially A. rubrostipa (B1 88 mg 100 g−1, B2 187 mg 100 g−1, protein 20.7% dry weight). However, the local species far outperformed the introductions in survival, tree height, basal diameter and resistance to termites. We suggest grafting as a way of harnessing the vigor of well-adapted local baobab varieties to the superior nutritional profiles of A. rubrostipa and others. Cross-species grafting tests in Adansonia were successful, thus creating new agroforestry possibilities with different scion/rootstock combinations.  相似文献   

20.
Abstract

Wood in general and wooden studs in particular are often distorted owing to uneven shrinkage during the drying process in the sawmill. Twist is often the most detrimental of all types of distortion, and it is caused by spiral grain in combination with variations in moisture content. For sawmills, the objective is to produce dried, straight boards, and one method of dealing with boards with excessive spiral grain is to sort them out and then dry them in a pretwisted position to obtain straight boards after drying. A model using the finite element (FE) method for the simulation of drying twist distortions was first calibrated against laboratory experiments in which boards were dried with and without restraints and pretwists. After the calibration, the FE results were compared with industrial test results for boards that were dried without restraints or with restraints with zero pretwist, i.e. straight restraints. The FE model used an elastic–ideally plastic material model to obtain permanent deformations. The calibration was to set the yield stresses so that there was a good match between FE results and results from the laboratory experiments. The comparison between the industrial test results and the FE results showed that the FE model is capable of realistic simulations of drying boards with and without restraints and presumably also pretwists.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号