首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
This study investigates the applicability of on-line coupling of capillary electrophoresis with electrospray ionization tandem mass spectrometry (CZE-ESI-MS) for the separation and characterization of alpha- and beta-acids and oxidized hop acids from crude extracts of different hop varieties. CZE-ESI-MS with negative-ion electrospray ionization proved to be a suitable technique for the determination of these types of natural compounds and their oxidized derivatives. The CZE parameters (pH, concentration, and buffer type) and ESI-MS parameters (nature and flow rate of the sheath liquid, nebulizer pressure, drying gas flow rate, temperature, and compound stability) were optimized. The optimized method provides the potential for a fast qualitative determination of hop acids and their oxidation compounds. The method was also applied to the determination of iso-alpha-acids in beer.  相似文献   

2.
The influence of hydrophobic polypeptides concentrated in beer foam, together with the composition of iso-alpha acids and the content of malto-oligosaccharides in beer on foam stability, has been investigated. The objective was to find out whether a shortage of one of these positive contributors to foam stability could be compensated for by an increased presence of another or whether optimum levels of each contributor is necessary. For that purpose, an image analysis method to evaluate beer foam quality was developed. The foam collapse time was the parameter chosen to group beers according to their foam stability. Profiles of hydrophobic polypeptides that concentrate in beer foam, iso-alpha acids, and malto-oligosaccharides of 14 beer brands were acquired by high-performance liquid chromatography. Principal component analysis (PCA) was performed to show the relationship between beer brands and its composition. Beers that contained propylene glycol alginate as a foam enhancer showed high foam stability except for one beer, which had a low content of hydrophobic polypeptides, thereby highlighting the requirement of threshold levels of hydrophobic polypeptides to obtain stable foam. The data of samples that were devoid of a foam additive were subjected to a discriminant statistical analysis. Foam stability declined in proportion to decreases in hydrophobic polypeptides and to a lesser extent to decreases in iso-alpha-acid contents. Apparently, the content of malto-oligosaccharides were found to have no major influence on foam stability. The model of discriminate analysis was found to explain 100% of the variance in data with 85.2% success in classifying all samples according to the model, suggesting that foam stability is mainly governed by the beer constituents evaluated in this study.  相似文献   

3.
Beer consumers demand satisfactory and consistent foam stability; thus, it is a high priority for brewers. Beer foam is stabilized by the interaction between certain beer proteins, including lipid transfer protein 1 (LTP1), and isomerized hop alpha-acids, but destabilized by lipids. In this study it was shown that the wort boiling temperature during the brewing process was critical in determining the final beer LTP1 content and conformation. LTP1 levels during brewing were measured by an LTP1 ELISA, using antinative barley LTP1 polyclonal antibodies. It was observed that the higher wort boiling temperatures ( approximately 102 degrees C), resulting from low altitude at sea level, reduced the final beer LTP1 level to 2-3 microg/mL, whereas the lower wort boiling temperatures ( approximately 96 degrees C), resulting from higher altitudes (1800 m), produced LTP1 levels between 17 and 35 microg/mL. Low levels of LTP1 in combination with elevated levels of free fatty acids (FFA) resulted in poor foam stability, whereas beer produced with low levels of LTP1 and FFA had satisfactory foam stability. Previous studies indicated the need for LTP1 denaturing to improve its foam stabilizing properties. However, the results presented here show that LTP1 denaturation reduces its ability to act as a binding protein for foam-damaging FFA. These investigations suggest that wort boiling temperature is an important factor in determining the level and conformation of LTP1, thereby favoring satisfactory beer foam stability.  相似文献   

4.
Chill-haze formation during beer production is known to involve polyphenols that interact with proline-rich proteins. We hypothesized that incubating beer wort with a proline-specific protease would extensively hydrolyze these proline-rich proteins, yielding a peptide fraction that is unable to form a haze. Predigestion of the proline-rich wheat gliadin with different proteases pointed toward a strong haze-suppressing effect by a proline-specific enzyme. This finding was confirmed in small-scale brewing experiments using a recently identified proline-specific protease with an acidic pH optimum. Subsequent pilot plant trials demonstrated that, upon its addition during the fermentation phase of beer brewing, even low levels of this acidic enzyme effectively prevented chill-haze formation in bottled beer. Results of beer foam stability measurements indicated that the enzyme treatment leaves the beer foam almost unaffected. In combination with the enzyme's cost-effectiveness and regulatory status, these preliminary test results seem to favor further industrial development of this enzymatic beer stabilization method.  相似文献   

5.
The negative effect of fatty acids on the foam stability of beer has been assessed. Long-chain fatty acids are far more damaging than short-chain fatty acids on the foam stability of beer at the concentrations employed. Polypeptides have been isolated from an all malt beer by hydrophobic interaction chromatography. Using this technique five groups of polypeptides were isolated, group 1 being the least hydrophobic and group 5 the most hydrophobic, all of which exhibited similar polypeptide compositions by SDS-PAGE. All five hydrophobic polypeptide groups bound [(14)C]linoleic acid; however, group 5, the most hydrophobic group, bound the most linoleic acid. Groups 1 and 5 were titrated with cis-parinaric acid (CPA) to produce binding curves, which were compared with a binding curve obtained for bovine serum albumin (BSA). Groups 1 and 5 both produced binding curves that saturated at approximately 5.5 microM and 4 microM CPA and had association constants (K(a)) of 6.27 x 10(7) and 1.62 x 10(7) M(-1), respectively. In comparison, BSA produced a binding curve that saturated at 6 microM CPA and had a K(a) of 3.95 x 10(7) M(-1). Further investigation has shown that group 1 is pH sensitive and group 5 pH insensitive with respect to lipid binding. The lipid-binding activity of group 5 was also shown to be unaffected by ethanol concentration. Linoleic acid (5 microM) when added to beer resulted in unstable foam. Group 5 was added to the lipid-damaged beer and was shown to restore the foam stability to values that were obtained for the control beer. It has therefore been demonstrated that proteins isolated from beer have a lipid-binding capacity and that they can convey a degree of protection against lipid-induced foam destabilization.  相似文献   

6.
  相似文献   

7.
Barley lipid transfer protein (LTP1) is a heat-stable and protease-resistant albumin that concentrates in beer, where it participates in the formation and stability of beer foam. Whereas the barley LTP1 does not display any foaming properties, the corresponding beer protein is surface-active. Such an improvement is related to glycation by Maillard reactions on malting, acylation on mashing, and structural unfolding on brewing. The structural stability of purified barley and glycated malt LTP1 toward heating has been analyzed. Whatever the modification, lipid adduction or glycation, barley LTP1s are highly stable proteins that resisted temperatures up to 100 degrees C. Unfolding of LTP1 occurred only when heating was conducted in the presence of a reducing agent. In the presence of sodium sulfite, the lipid-adducted barley and malt LTP1 displayed higher heat stability than the nonadducted protein. Glycation had no or weak effect on heat-induced unfolding. Finally, it was shown that unfolding occurred on wort boiling before fermentation and that the reducing conditions are provided by malt extract.  相似文献   

8.
The effects of addition of hexamethylenetetramine (HMT) or sulfite during mashing on the polyphenol content and oxidative stability of wort and beer have been evaluated in a series of laboratory mashings and pilot brews. HMT reduced the concentration of catechin, prodelphinidin B-3, and procyanidin B-3 in wort and beer, whereas the concentration of ferulic acid was unaffected. Sulfite had only a minor effect on the concentration of phenolics in wort and beer. Addition of HMT or sulfite during mashing increased the oxidative stability of the beer slightly as judged by the tendency of formation of radicals (ESR spin trapping technique), although sensory analysis gave identical flavor acceptance scores to beers produced from untreated and HMT-treated wort and lower scores to beer from sulfite-treated wort. No difference in the oxidative stability of the differently treated sweet worts could be detected as judged by the rate of formation of radicals. HMT addition during mashing has thus been demonstrated to be a valuable experimental tool to control the level of polyphenols in wort and for producing brews with various levels of polyphenols from a single malt.  相似文献   

9.
Beer foam stability is an important characteristic. It has been suggested that isoforms of protein Z, that is, protein Z4 and protein Z7, contribute to beer foam stability. We investigated the relationship between beer foam stability and protein Z4 and protein Z7 using their deficient mutants. As a protein Z4-deficient mutant, cv. Pirkka was used. Protein Z7 deficiency was screened in 1564 barley accessions in the world collection of Okayama University, Japan. The barley samples from normal, protein Z4-deficient, protein Z7-deficient, and double-deficient were genotyped in F(2) populations and then pooled based on the DNA marker genotypes of protein Z4 and protein Z7. For a brewing trial, F(5) pooled subpopulations were used. After malting and brewing, the foam stability was determined, and the results showed that the levels of foam stability in the four samples were comparable. Two-dimensional gel electrophoresis was used to investigate the proteome in these beer samples. The results showed that low molecular weight proteins, including lipid transfer protein (LTP2), in the deficient mutants were higher than those in the normal sample. Our results suggest that the contribution of protein Z4 and protein Z7 to beer foam stability was not greater than that of other beer proteins.  相似文献   

10.
Phenolic compounds present in beer were shown by fluorescence spectroscopy and laser flash photolysis to deactivate both singlet- and triplet-excited states of riboflavin with bimolecular rate constants close to the diffusion control ranging from 2.8x10(9) to 1.1x10(10) M-1 s-1 and from 1.1x10(9) to 2.6x10(9) M-1 s-1, respectively. Enthalpies of activation were low (up to 33.2 kJ mol-1), and entropies of activation were positive, ranging from 17 to 92 J mol-1 K-1, as derived from temperature dependence, indicating a compensation effect. From a Stern-Volmer analysis of the singlet-excited riboflavin quenching by phenols it was found that high amounts of phenolic compounds (>0.3 M) would be needed to hinder triplet-excited riboflavin generation. On the other hand, a phenolic content of 0.36 mM is likely to quench 90% of the triplet-excited state. Phenol photodegradation was found to be complex, and using ESI-MS analysis it was not possible to identify specific photooxidation products of the phenolic compounds; only the photoproducts of riboflavin could be detected and structurally assigned. The rate of reaction of triplet-excited riboflavin with phenolic compounds in acetonitrile/citrate buffer (pH 4.6, 10 mM) is 550 times faster than the reaction with iso-alpha-acids from hops, indicating that triplet-excited quenchers such as phenols may be involved in the early steps in light-struck flavor formation in beer through radical formation. Terpenes present in herb-flavored beers were found to be nonreactive toward singlet- and triplet-excited-state riboflavin, and any protection depends on other mechanisms.  相似文献   

11.
Foam stability is an important quality trait of beer. Our previous results of two-dimensional gel electrophoresis (2DE) analyses of beer proteins implied a relationship between barley dimeric alpha-amylase inhibitor-1 (BDAI-1) and beer foam stability as judged by the NIBEM-T analyzer. To develop a novel prediction method of beer foam stability under different conditions of barley cultivar and malt modification, multiple linear regression analysis was applied. The spot intensities of major beer proteins on 2DE gel were quantified and used as explanatory variables. The foam stabilities of 25 beer samples each brewed from malt with different malt modification in one of the three cultivars (cultivars A, B, and C) were explained by the spot intensities of BDAI-1 at the 5% significance level ( r = 0.421). Furthermore, two other major protein spots (b0 and b5) were observed on the 2DE gels of Japanese commercial beer samples with different foam stability. Then, multiple regression for foam stability was calculated using these three spot intensities as explanatory variables. As a result, 72.1% of the beer foam stability in 25 beer samples was explained by a novel multiple regression equation calculated using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. To verify the validity of the multiple regression equation and the explanatory variables, the beer foam stability in practical beer samples was analyzed. As a result, 81.5% of the beer foam stability in 10 Japanese commercial beer samples was also explained by using spot b0 and BDAI-1 as positive explanatory variables and spot b5 as a negative variable. Mass spectrometry analyses followed by database searches revealed that protein spots b0 and b5 were identified as protein Z originated from barley and thioredoxin originated from yeast, respectively. These results confirm that BDAI-1 and protein Z are foam-positive factors and identify yeast thioredoxin as a possible novel foam-negative factor.  相似文献   

12.
The foam stability of beer is one of the important key factors in evaluating the quality of beer. The purpose of this study was to investigate the relationship between the level of malt modification (degradation of protein, starch, and so on) and the beer foam stability. This was achieved by examining foam-promoting proteins using two-dimensional gel electrophoresis (2DE). We found that the foam stability of beer samples brewed from the barley malts of cultivars B and C decreased as the level of malt modification increased; however, the foam stability of cultivar A did not change. To identify the property providing the increased foam stability of cultivar A, we analyzed beer proteins using 2DE. We analyzed three fractions that could contain beer foam-promoting proteins, namely, beer whole proteins, salt-precipitated proteins, and the proteins concentrated from beer foam. As a result, we found that in cultivar A, some protein spots did not change in any of these three protein fractions even when the level of malt modification increased, although the corresponding protein spots in cultivars B and C decreased. We analyzed these protein spots by peptide mass finger printing using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. As a result, all of these spots were identified as barley dimeric alpha-amylase inhibitor-I (BDAI-I). These results suggest that BDAI-I is an important contributor to beer foam stability.  相似文献   

13.
Foam properties of a sunflower isolate (SI), as well as those of helianthinin and sunflower albumins (SFAs), were studied at various pH values and ionic strengths and after heat treatment. Less foam could be formed from helianthinin than from SFAs, but foam prepared with helianthinin was more stable against Ostwald ripening and drainage than foam prepared with SFAs. Foams made with SFAs suffered from extensive coalescence. The formation and stability of foams made from reconstituted mixtures of both proteins and from SI showed the deteriorating effect of SFAs on foam stability. Foam stability against Ostwald ripening increased after acid and heat treatment of helianthinin. Partial unfolding of sunflower proteins, resulting in increased structural flexibility, improved protein performance at the air/water interface. Furthermore, it was observed that the protein available is used inefficiently and that typically only approximately 20% of the protein present is incorporated in the foam.  相似文献   

14.
The fate of residues of seven agrochemicals (chlorfenapyr, quinoxyfen, tebuconazole, fenarimol, pyridaben, and E- and Z-dimethomorph) from the treatment on hops to the brewing of beer was studied. First, a multi-residue analytical method was developed for the determination of pesticide residues in spent hops, trub, wort, and beer. Each matrix was validated over at least two levels of fortification, for all seven compounds, in the ranges 0.05-5.0, 0.001-1.0, 0.001-0.05, and 0.0005-1.0 ppm for spent hops, trub, wort, and beer, respectively. Recoveries ranged from 73 to 136%. Second, the matrixes prepared from hops, which were treated under commercial practices with each compound, were analyzed using the method developed. The use of treated hops resulted in the carryover of 0.001 ppm of tebuconazole, 0.008 Z-dimethomorph, and 0.005 ppm of E-dimethomorph into the wort. The bulk of the remaining residues of all seven compounds was found on the spent hops. Following fermentation, all compounds were found in levels less than 0.0005 ppm in beer, except Z- (0.006 ppm) and E-dimethomorph (0.004 ppm). Third, when all seven pesticides were spiked prior to the pitching of yeast into clean wort, most of the nonpolar compounds (chlorfenapyr, quinoxyfen, and pyridaben) partitioned into the organic material (trub) which settled to the bottom, while the more polar compounds (fenarimol, tebuconazole, and E- and Z-dimethomorph) were generally distributed evenly between the beer and the trub.  相似文献   

15.
The foam of sparkling wines is a key parameter of their quality. However, the compounds that are directly involved in foam formation and stabilization are not yet completely established. In this work, seven sparkling wines were produced in Bairrada appellation (Portugal) under different conditions and their foaming properties evaluated using a Mosalux-based device. Fractionation of the sparkling wines into four independent fractions, (1) high molecular weight material, with molecular weight higher than 12 kDa (HMW), (2) hydrophilic material with molecular weigh between 1 and 12 kDa (AqIMW), (3) hydrophobic material with molecular weigh between 1 and 12 kDa (MeIMW), and (4) hydrophobic material with a molecular weight lower than 1 kDa (MeLMW), allowed the observation that the wines presenting the lower foam stability were those that presented lower amounts of the MeLMW fraction. The fraction that presented the best foam stability was HMW. When HMW is combined with MeLMW fraction, the foam stability largely increased. This increase was even larger, approaching the foam stability of the sparkling wine, when HMW was combined with the less hydrophobic subfraction of MeLMW (fraction 3). Electrospray tandem mass spectrometry (ESI-MS/MS) of fraction 3 allowed the assignment of polyethylene glycol oligomers (n = 5-11) and diethylene glycol 8-hydroxytridecanoate glyceryl acetate. To observe if these molecules occur in sparkling wine foam, the MeLMW was recovered directly from the sparkling wine foam and was also analyzed by ESI-MS/MS. The presence of monoacylglycerols of palmitic and stearic acids, as well as four glycerylethylene glycol fatty acid derivatives, was observed. These surface active compounds are preferentially partitioned by the sparkling wine foam rather than the liquid phase, allowing the inference of their role as key components in the promotion and stabilization of sparkling wine foam.  相似文献   

16.
The spectrofluorometric determination of histamine in wines, other alcoholic beverages, and vinegars is described. Histamine is extracted with n-butanol, transferred to hydrochloric acid, and subjected to a condensation reaction with o-phthalaldehyde (OPT). The method was tested for sensitivity (0.03 ppm limit of detection and 0.08 ppm limit of determination), precision (6.4% CV for a content of 1.25 ppm and 19.5% CV for a content of 0.25 ppm), accuracy (97.1%), recovery (90.6-96.9%), and lack of interference by histidine. The method can be applied to wine, must, beer, champagne, cider, vermouth, and vinegar with satisfactory results.  相似文献   

17.
In this article, a detailed study on hop alpha-acid isomerization kinetics is presented. Because of the complex wort matrix and interfering interactions occurring during real wort boiling (i.e., trub formation and alpha-acids/iso-alpha-acids complexation), this investigation on alpha-acid isomerization kinetics was performed in aqueous buffer solution as a function of time (0-90 min) and heating temperature (80-100 degrees C). Rate constants and activation energies for the formation of individual iso-alpha-acids were determined. It was found that iso-alpha-acid formation follows first-order kinetics and Arrhenius behavior. Differences in activation energies for the formation of trans- and cis-isomers were noticed, the activation energy for the formation of trans-iso-alpha-acids being approximately 9 kJmol (-1) lower.  相似文献   

18.
A monoclonal antibody (Mab; IFRN 1625) has been produced, which is specific for the most hydrophobic polypeptides responsible for foam stabilization. The binding characteristics of the Mab suggest that it is the conformation of certain hydrophobic polypeptides which is important for foam stabilization. An enzyme-linked immunosorbent assay (ELISA) for assessing the foam-positive form of the foam-stabilizing polypeptides in beer was developed using IFRN 1625. A good correlation was obtained between ELISA determination of foam-stabilizing polypeptides and an empirical means of determining foaming, that is, the Rudin head retention values, for a collection of beers of various foam qualities. Application of the ELISA to different stages of the brewing process showed that the amounts of foam-positive polypeptides increased during barley germination. During the brewing process the proportion of foam-positive polypeptides present after fermentation increased slightly, although a large amount was lost along with other beer proteins during subsequent steps, such as filtering. The present study demonstrates that the amounts of beer polypeptide present in a foam-positive form have a direct relationship with the foaming potential of beer, that their levels are altered by processing, and that there is potential for greater quality control.  相似文献   

19.
  相似文献   

20.
Influence of Fatty acids on foaming properties of cider   总被引：1，自引：0，他引：1  
Seventy-seven ciders from four consecutive harvests, which were produced at industrial scale by cider-makers from the region of Asturias (northern Spain), were analyzed to evaluate their foam capacity. The Bikerman method for the evaluation of foaming characteristics was adapted to ciders. In foaming, there are two parameters, foam formation and foam stability, which are found to be related to each other. To determine the relationship between fatty acid content and foaming properties of cider, the multivariate analysis technique of canonical correlation analysis was applied. Foam stability is positively related to the content of caprylic acid. Foam height is positively related to linolenic, pentadecanoic, and palmitic acid and negatively related to stearic and linoleic acid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号