首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
The optimum duration of test for the measurement of ADG, ADFI, feed:gain ratio [which is the reciprocal of the efficiency of gain (G:F) and therefore increases as the efficiency of gain decrease and vice versa], and residual feed intake was examined in growing pigs. Data from 144 hybrid (mainly Large White x Landrace) pigs involved in a longitudinal (n = 54) and serial slaughter (n = 90) experiment were used. The pigs were housed in individual pens from 70 +/- 1 d of age (mean +/- SD) and fed ad libitum a pelleted commercial diet. Feed intake and BW data on pigs that had a minimum of 10-wk records were partitioned into a 14-d adjustment and a 56-d test period. Phenotypic correlations among weekly measurements were used to examine the repeatability of each trait. Changes in phenotypic residual variance and correlation using shortened (7-, 14-, 21-, 28-, 35-, 42-, and 49-d) tests compared with the full-length 56-d test were used as criteria to assess the optimum test duration. The results of the phenotypic correlations among weekly measurements indicated that ADFI, which was characterized by moderate to high correlations (0.41 to 0.81), was more repeatable than ADG, which was characterized by low correlations (0.00 to 0.43). Mean gut fill (n = 107) was 4.2% of BW but was characterized by large variation among the pigs (SD = 1.8; CV = 42.2%). This variation in gut fill was a major contributor to the low repeatability of the measurement of ADG. These repeatability results indicated that ADG, rather than ADFI, will determine the optimum duration of test for the feed efficiency traits. The results of the shortened relative to the full-length test indicate that for growing pigs under good nutrition and ad libitum feeding, a 28-d test was adequate for the measurement of feed intake, whereas a 35-d test was required to measure ADG, feed:gain ratio, and residual feed intake without compromising the accuracy of measurement.  相似文献   

2.
The objectives of this study were to characterize feed efficiency traits and to examine phenotypic correlations between performance and feeding behavior traits, and ultrasound measurements of carcass composition in growing bulls. Individual DMI and feeding behavior traits were measured in Angus bulls (n=341; initial BW=371.1+/-50.8 kg) fed a corn silage-based diet (ME=2.77 Mcal/kg of DM) for 84 d in trials 1 and 2 and for 70 d in trials 3 and 4 by using a GrowSafe feeding system. Meal duration (min/d) and meal frequency (events/d) were calculated for each bull from feeding behavior recorded by the GrowSafe system. Ultrasound measures of carcass 12th-rib fat thickness (BF) and LM area (LMA) were obtained at the start and end of each trial. Residual feed intake (RFIp) was computed from the linear regression of DMI on ADG and midtest BW(0.75) (metabolic BW, MBW), with trial, trial by ADG, and trial by midtest BW(0.75) as random effects (base model). Overall ADG, DMI, and RFIp were 1.44 (SD=0.29), 9.46 (SD=1.31), and 0.00 (SD=0.78) kg/d, respectively. Stepwise regression analysis revealed that inclusion of BW gain in BF and LMA in the base model increased R(2) (0.76 vs. 0.78) and accounted for 9% of the variation in DMI not explained by MBW and ADG (RFIp). Residual feed intake and carcass-adjusted residual feed intake (RFIc) were moderately correlated with DMI (0.60 and 0.55, respectively) and feed conversion ratio (FCR; 0.49 and 0.45, respectively), and strongly correlated with partial efficiency of growth (PEG; -0.84 and -0.78, respectively), but not with ADG or MBW. Gain in BF was weakly correlated with RFIp (0.30), FCR (-0.15), and PEG (-0.11), but not with RFIc. Gain in LMA was weakly correlated with RFIp (0.17) and FCR (-0.19), but not with PEG or RFIc. The Spearman rank correlation between RFIp and RFIc was high (0.91). Meal duration (0.41), head-down duration (0.38), and meal frequency (0.26) were correlated with RFIp and accounted for 35% of the variation in DMI not explained by MBW, ADG, and ultrasound traits (RFIc). These results suggest that adjusting residual feed intake for carcass composition will facilitate selection to reduce feed intake in cattle without affecting rate or composition of gain.  相似文献   

3.
The objectives of this study were to quantify the phenotypic variation in residual feed intake (RFI) in pregnant beef heifers offered a grass silage diet and to characterize their productivity. Seventy-three pregnant (mean gestation d 198, SD = 27 d) Simmental and Simmental × Holstein-Friesian heifers (mean initial BW 548, SD = 47.5 kg) were offered grass silage ad libitum. Heifer DMI, BW, BCS, skeletal measurements, ultrasonic fat and muscle depth, visual muscularity score, rumen fermentation, total tract digestibility, blood metabolite and hematology variables, feeding, and activity behavior were measured during an 84-d feed intake study. After parturition calf birth weight, calving difficulty, cow serum IgG, hematology variables, and calf humoral immune status were measured. In a subset of cows (n = 28), DMI, milk yield and various body composition variables were also measured approximately 3 wk postpartum. Phenotypic RFI was calculated for each animal as the difference between actual DMI and expected DMI. Expected DMI was computed for each animal by regressing average daily DMI on conceptus-adjusted mean BW(0.75) and conceptus-adjusted ADG over an 84-d period. Within breed, heifers were ranked by RFI into low (efficient), medium, and high (inefficient) groups by dividing them into thirds. Heifers with high RFI had 8.8 and 17.1% greater (P < 0.001) DMI than medium and low RFI groups, respectively. The RFI groups did not differ in ADG or BW (P > 0.05). Residual feed intake was positively correlated with DMI (r = 0.85) but not with feed conversion ratio, ADG, or BW. The RFI groups did not differ (P > 0.05) in skeletal size, BCS, ultrasonic fat depth, total tract digestibility, calf birth weight, calving difficulty, serum IgG concentrations, or milk yield. Visual muscularity scores, initial test and postpartum ultrasonic muscle depth were negatively correlated with RFI (P < 0.05). Including mean ultrasonic muscle depth into the base RFI regression model increased its R(2) (0.29 to 0.38). Pearson rank correlation between RFI and muscle-adjusted RFI was 0.93. The results show that efficient RFI heifers consumed less feed without any compromise in growth, body composition, or maternal traits measured.  相似文献   

4.
Feed intake and efficiency of growth are economically important traits of beef cattle. This study determined the relationships of daily DMI, feed:gain ratio [F:G, which is the reciprocal of the efficiency of gain (G:F) and therefore increases as the efficiency of gain decreases and vice versa, residual feed intake (RFI), and partial efficiency of growth (efficiency of ADG, PEG) with growth and carcass merit of beef cattle. Residual feed intake was calculated from phenotypic regression (RFIp) or genetic regression (RFIg) of ADG and metabolic BW on DMI. An F1 half-sib pedigree file containing 28 sires, 321 dams, and 464 progeny produced from crosses between Alberta Hybrid cows and Angus, Charolais, or Alberta Hybrid bulls was used. Families averaged 20 progeny per sire (range = 3 to 56). Performance, ultrasound, and DMI data was available on all progeny, of which 381 had carcass data. Phenotypic and genetic parameters were obtained using SAS and ASREML software, respectively. Differences in RFIp and RFIg, respectively, between the most and least efficient steers (i.e., steers with the lowest PEG) were 5.59 and 6.84 kg of DM/d. Heritabilities for DMI, F:G, PEG, RFIp, and RFIg were 0.54 +/- 0.15, 0.41 +/- 0.15, 0.56 +/- 0.16, 0.21 +/- 0.12, and 0.42 +/- 0.15, respectively. The genetic (r = 0.92) and phenotypic (r = 0.97) correlations between RFIp and RFIg indicated that the 2 indices are very similar. Both indices of RFI were favorably correlated phenotypically (P < 0.001) and genetically with DMI, F:G, and PEG. Residual feed intake was tendentiously genetically correlated with ADG (r = 0.46 +/- 0.45) and metabolic BW (r = 0.27 +/- 0.33), albeit with high SE. Genetically, RFIg was independent of ADG and BW but showed a phenotypic correlation with ADG (r = -0.21; P < 0.05). Daily DMI was correlated genetically (r = 0.28) and phenotypically (r = 0.30) with F:G. Both DMI and F:G were strongly correlated with ADG (r > 0.50), but only DMI had strong genetic (r = 0.87 +/- 0.10) and phenotypic (r = 0.65) correlations with metabolic BW. Generally, the phenotypic and genetic correlations of RFI with carcass merit were not different from zero, except genetic correlations of RFI with ultrasound and carcass LM area and carcass lean yield and phenotypic correlations of RFI with backfat thickness (P < 0.01). Daily DMI had moderate to high phenotypic (P < 0.01) and genetic correlations with all the ultrasound and carcass traits. Depending on how RFI technology is applied, adjustment for body composition in addition to growth may be required to minimize the potential for correlated responses to selection in cattle.  相似文献   

5.
Identifying differences in feed efficiency among group-fed cattle   总被引：1，自引：0，他引：1  
  相似文献   

6.
Two experiments evaluated effects of ractopamine hydrochloride (RAC) on performance, intake patterns, and acid-base balance of feedlot cattle. In Exp. 1, 360 crossbred steers (Brangus, British, and British x Continental breeding; initial BW = 545 kg) were used in a study with a 3 x 3 factorial design to study the effects of dose [0, 100, or 200 mg/(steer x d) of RAC] and duration (28, 35, or 42 d) of feeding of RAC in a randomized complete block design (9 treatments, 8 pens/treatment). No dose x duration interactions were detected (P > 0.10). As RAC dose increased, final BW (FBW; P = 0.01), ADG (P < 0.01), and G:F (P < 0.01) increased linearly. As duration of feeding increased, ADG increased quadratically (P = 0.04), with tendencies for quadratic effects for FBW (P = 0.06), DMI (P = 0.07), and G:F (P = 0.09). Hot carcass weight increased linearly (P = 0.02) as dose of RAC increased. Thus, increasing the dose of RAC from 0 to 200 mg/(steer x d) and the duration of feeding from 28 to 42 d improved feedlot performance, although quadratic responses for duration of feeding indicated little improvement as the duration was extended from 35 to 42 d. In Exp. 2, 12 crossbred beef steers (BW = 593 kg) were used in a completely random design to evaluate the effects of RAC [0 or 200 mg/(steer x d) for 30 d; 6 steers/treatment] on rate of intake, daily variation in intake patterns, and acid-base balance. To assess intake patterns, absolute values of daily deviations in feed delivered to each steer relative to the total quantity of feed delivered were analyzed as repeated measures. There were no differences (P > 0.10) in feedlot performance, urine pH, blood gas measurements, or variation in intake patterns between RAC and control cattle, but steers fed RAC had increased (P = 0.04) LM area, decreased (P = 0.03) yield grade, and increased (P < 0.10) time to consume 50 and 75% of daily intake relative to control steers. Our results suggest that feeding RAC for 35 d at 200 mg/(steer x d) provided optimal performance, and no effects on acid-base balance or variation in intake patterns of finishing steers were noted with RAC fed at 200 mg/(steer x d) over a 30-d period.  相似文献   

7.
Relationships between residual feed intake (RFI) and other performance variables were determined using 54 purebred Angus steers. Individual feed intake and BW gain were recorded during a 70-d post-weaning period to calculate RFI. After the 70-d post-weaning test, steers were fed a finishing ration to a similar fat thickness (FT), transported to a commercial facility, and slaughtered. A subsample of carcasses (n = 32) was selected to examine the relationships among RFI, meat quality, and palatability. Steers were categorized into high (> 0.5 SD above the mean; n = 16), medium (mid; +/- 0.5 SD from the mean; n = 21), and low (< 0.5 SD below the mean; n = 17) RFI groups. No differences were detected in ADG, initial BW, and d 71 BW among the high, mid, and low RFI steers. Steers from the high RFI group had a greater DMI (P = 0.004) and feed conversion ratio (FCR; DMI:ADG; P = 0.002) compared with the low RFI steers. Residual feed intake was positively correlated with DMI (r = 0.54; P = 0.003) and FCR (r = 0.42; P = 0.002), but not with initial BW, d 71 BW, d 71 ultrasound FT, initial ultrasound LM area, d 71 ultrasound LM area, or ADG. The FCR was positively correlated with initial BW (r = 0.46; P = 0.0005), d 71 BW (r = 0.34; P = 0.01), and DMI (r = 0.40; P = 0.003) and was negatively correlated with ADG (r = -0.65; P = 0.001). There were no differences among RFI groups for HCW, LM area, FT, KPH, USDA yield grade, marbling score, or quality grade. Reflectance color b* scores of steaks from high RFI steers were greater (P = 0.02) than those from low RFI steers. There was no difference between high and low RFI groups for LM calpastatin activity. Warner-Bratzler shear force and sensory panel tenderness and flavor scores of steaks were similar across RFI groups. Steaks from high RFI steers had lower (P = 0.04) off-flavor scores than those from low RFI steers. Cook loss percentages were greater (P = 0.005) for steaks from low RFI steers than for those from mid RFI steers. These data support current views that RFI is independent of ADG, but is correlated with DMI and FCR. Importantly, the data also support the hypothesis that there is no relationship between RFI and beef quality in purebred Angus steers.  相似文献   

8.
Interest in improving feed efficiency in cattle is intensifying. Residual feed intake (RFI), which is the difference between expected intake and that predicted based on energy demands, is now the most commonly used measure of feed efficiency over a given time period. However, RFI, as commonly defined, is independent of growth rate, which may affect its acceptance by industry. Residual BW gain (RG) has also been proposed as a measure of feed efficiency and is represented as the residuals from a multiple regression model regressing ADG on both DMI and BW. In this study, we propose a new trait, residual intake and BW gain (RIG), which retains the favorable characteristic of both RFI and RG being independent of BW, but animals superior for RIG have, on average, both greater ADG and reduced DMI. Phenotypic and genetic analyses were undertaken on up to 2,605 purebred performance-tested bulls. Clear phenotypic differences in DMI and ADG existed between animals divergent for RIG. The heritability of RIG was 0.36 ± 0.06, which is consistent with the heritability estimates of RFI and other feed efficiency traits measured in the study. The RIG trait was both phenotypically and genetically negatively correlated with DMI and positively correlated with ADG; no correlation existed between RIG and BW. The advantages of both reduced daily DMI and greater ADG in animals superior for RIG are demonstrated compared with animals superior for either RFI or RG.  相似文献   

9.
Feed intake and feed efficiency are economically important traits in beef cattle because feed is the greatest variable cost in production. Feed efficiency can be measured as feed conversion ratio (FCR, intake per unit gain) or residual feed intake (RFI, measured as DMI corrected for BW and growth rate, and sometimes a measure of body composition, usually carcass fatness, RFI(bf)). The goal of this study was to fine map QTL for these traits in beef cattle using 2,194 markers on 24 autosomes. The animals used were from 20 half-sib families originating from Angus, Charolais, and University of Alberta Hybrid bulls. A mixed model with random sire and fixed QTL effect nested within sire was used to test each location (cM) along the chromosomes. Threshold levels were determined at the chromosome and genome levels using 20,000 permutations. In total, 4 QTL exceeded the genome-wise threshold of P < 0.001, 3 exceeded at P < 0.01, 17 at P < 0.05, and 30 achieved significance at the chromosome-wise threshold level (at least P < 0.05). No QTL were detected on BTA 8, 16, and 27 above the 5% chromosome-wise significance threshold for any of the traits. Nineteen chromosomes contained RFI QTL significant at the chromosome-wise level. The RFI(bf) QTL results were generally similar to those of RFI, the positions being similar, but occasionally differing in the level of significance. Compared with RFI, fewer QTL were detected for both FCR and DMI, 12 and 4 QTL, respectively, at the genome-wise thresholds. Some chromosomes contained FCR QTL, but not RFI QTL, but all DMI QTL were on chromosomes where RFI QTL were detected. The most significant QTL for RFI was located on BTA 3 at 82 cM (P = 7.60 x 10(-5)), for FCR on BTA 24 at 59 cM (P = 0.0002), and for DMI on BTA 7 at 54 cM (P = 1.38 x 10(-5)). The RFI QTL that showed the most consistent results with previous RFI QTL mapping studies were on BTA 1, 7, 18, and 19. The identification of these QTL provides a starting point to identify genes affecting feed intake and efficiency for use in marker-assisted selection and management.  相似文献   

10.
Angus bulls and heifers from lines divergently selected for serum IGF-I concentration were used to evaluate the effects of IGF-I selection line on growth performance and feed efficiency in 2 studies. In study 1, bulls (low line, n = 9; high line, n = 8; initial BW = 367.1 +/- 22.9 kg) and heifers (low line, n = 9; high line, n = 13; initial BW = 286.4 +/- 28.6 kg) were adapted to a roughage-based diet (ME = 1.95 Mcal/kg of DM) for 24 d and fed individually for 77 d by using Calan gate feeders. In study 2, bulls (low line, n = 15; high line, n = 12; initial BW = 297.5 +/- 34.4 kg) and heifers (low line, n = 9; high line, n = 20; initial BW = 256.0 +/- 25.1 kg) were adapted to a grain-based diet (ME = 2.85 Mcal/kg of DM) for 32 d and fed individually for 70 d by using Calan gate feeders. Blood samples were collected at weaning and at the start and end of each study, and serum IGF-I concentration was determined. Residual feed intake (RFI) was calculated, within study, as the residual from the linear regression of DMI on midtest BW(0.75), ADG, sex, sex by midtest BW(0.75) and sex by ADG. In study 1, calves from the low IGF-I selection line had similar initial and final BW and ADG, compared with calves from the high IGF-I selection line. In addition, DMI and feed conversion ratio were similar between IGF-I selection lines; however, calves from the low IGF-I selection line tended (P < 0.10) to have lesser RFI than calves from the high IGF-I selection line (-0.26 vs. 0.24 +/- 0.31 kg/d). In study 2, IGF-I selection line had no influence on performance or feed efficiency traits. However, there was a tendency (P = 0.15) for an IGF-I selection line x sex interaction for RFI. Bulls from the low IGF-I selection line had numerically lesser RFI than those from the high IGF-I selection line, whereas in heifers, the IGF-I selection line had no effect on RFI. In studies 1 and 2, weaning and initial IGF-I concentrations were not correlated with either feed conversion ratio or RFI. However, regression analysis revealed a sex x IGF-I concentration interaction for initial IGF-I concentration in study 1 and weaning IGF-I concentration in study 2 such that the regression coefficient was positive for bulls and negative for heifers. These data suggest that genetic selection for postweaning serum IGF-I concentration had a minimal effect on RFI in beef cattle.  相似文献   

11.
A data set based on 50 studies including feed intake and utilization traits was used to perform a meta‐analysis to obtain pooled estimates using the variance between studies of genetic parameters for average daily gain (ADG); residual feed intake (RFI); metabolic body weight (MBW); feed conversion ratio (FCR); and daily dry matter intake (DMI) in beef cattle. The total data set included 128 heritability and 122 genetic correlation estimates published in the literature from 1961 to 2012. The meta‐analysis was performed using a random effects model where the restricted maximum likelihood estimator was used to evaluate variances among clusters. Also, a meta‐analysis using the method of cluster analysis was used to group the heritability estimates. Two clusters were obtained for each trait by different variables. It was observed, for all traits, that the heterogeneity of variance was significant between clusters and studies for genetic correlation estimates. The pooled estimates, adding the variance between clusters, for direct heritability estimates for ADG, DMI, RFI, MBW and FCR were 0.32 ± 0.04, 0.39 ± 0.03, 0.31 ± 0.02, 0.31 ± 0.03 and 0.26 ± 0.03, respectively. Pooled genetic correlation estimates ranged from ?0.15 to 0.67 among ADG, DMI, RFI, MBW and FCR. These pooled estimates of genetic parameters could be used to solve genetic prediction equations in populations where data is insufficient for variance component estimation. Cluster analysis is recommended as a statistical procedure to combine results from different studies to account for heterogeneity.  相似文献   

12.
Records on 1,180 young Angus bulls and heifers involved in performance tests were used to estimate genetic and phenotypic parameters for feed intake, feed efficiency, and other postweaning traits. The mean age was 268 d at the start of the performance test, which comprised 21-d adjustment and 70-d test periods. Traits studied included 200-d weight, 400-d weight, scrotal circumference, ultrasonic measurements of rib and rump fat depths and longissimus muscle area, ADG, metabolic weight, daily feed intake, feed conversion ratio, and residual feed intake. For all traits except the last five, additional data from the Angus Society ofAustralia pedigree and performance database were included, which increased the number of animals to 27,229. Genetic (co)variances were estimated by REML using animal models. Direct heritability estimates for 200-d weight, 400-d weight, rib fat depth, ADG, feed conversion,and residual feed intake were 0.17 +/- 0.03, 0.27 +/- 0.03, 0.35 +/- 0.04, 0.28 +/- 0.04, 0.29 +/- 0.04, and 0.39 +/- 0.03, respectively. Feed conversion ratio was genetically (r(g) = 0.66 ) and phenotypically (r(p) = 0.53) correlated with residual feed intake. Feed conversion ratio was correlated (r(g) = -0.62, r(p) = -0.74) with ADG, whereas residual feed intake was not (rg = -0.04, r(p) = -0.06). Genetically, both residual feed intake and feed conversion ratio were negatively correlated with direct effects of 200-d weight (r(g) = -0.45 and -0.21) and 400-d weight (r(g) = -0.26 and -0.09). The correlations between the remaining traits and the feed efficiency traits were near zero, except between feed intake and feed conversion ratio (r(g) = 0.31, r(p) = 0.23), feed intake and residual feed intake (r(g) = 0.69, r(p) = 0.72), and rib fat depth and residual feed intake (r(g) = 0.17, r(p) = 0.14). These results indicate that genetic improvement in feed efficiency can be achieved through selection and, in general, correlated responses in growth and the other postweaning traits will be minimal.  相似文献   

13.
Feed intake and feed efficiency of beef cattle are economically relevant traits. The study was conducted to identify QTL for feed intake and feed efficiency of beef cattle by using genotype information from 100 microsatellite markers and 355 SNP genotyped across 400 progeny of 20 Angus, Charolais, or Alberta Hybrid bulls. Traits analyzed include feedlot ADG, daily DMI, feed-to-gain ratio [F:G, which is the reciprocal of the efficiency of gain (G:F)], and residual feed intake (RFI). A mixed model with sire as random and QTL effects as fixed was used to generate an F-statistic profile across and within families for each trait along each chromosome, followed by empirical permutation tests to determine significance thresholds for QTL detection. Putative QTL for ADG (chromosome-wise P < 0.05) were detected across families on chromosomes 5 (130 cM), 6 (42 cM), 7 (84 cM), 11 (20 cM), 14 (74 cM), 16 (22 cM), 17 (9 cM), 18 (46 cM), 19 (53 cM), and 28 (23 cM). For DMI, putative QTL that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 1 (93 cM), 3 (123 cM), 15 (31 cM), 17 (81 cM), 18 (49 cM), 20 (56 cM), and 26 (69 cM) in the across-family analyses. Putative across-family QTL influencing F:G that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 3 (62 cM), 5 (129 cM), 7 (27 cM), 11 (16 cM), 16 (30 cM), 17 (81 cM), 22 (72 cM), 24 (55 cM), and 28 (24 cM). Putative QTL influencing RFI that exceeded the chromosome-wise P < 0.05 threshold were detected on chromosomes 1 (90 cM), 5 (129 cM), 7 (22 cM), 8 (80 cM), 12 (89 cM), 16 (41 cM), 17 (19 cM), and 26 (48 cM) in the across-family analyses. In addition, a total of 4, 6, 1, and 8 chromosomes showed suggestive evidence (chromosome-wise, P < 0.10) for putative ADG, DMI, F:G, and RFI QTL, respectively. Most of the QTL detected across families were also detected within families, although the locations across families were not necessarily the locations within families, which is likely because of differences among families in marker informativeness for the different linkage groups. The locations and direction of some of the QTL effects reported in this study suggest potentially favorable pleiotropic effects for the underlying genes. Further studies will be required to confirm these QTL in other populations so that they can be fine-mapped for potential applications in marker-assisted selection and management of beef cattle.  相似文献   

14.
Increasing feed costs and the desire to improve environmental stewardship have stimulated renewed interest in improving feed efficiency of livestock, including that of US dairy herds. For instance, USDA cost projections for corn and soybean meal suggest a 20% increase over 2010 pricing for a 16% protein mixed dairy cow ration in 2011, which may lead to a reduction in cow numbers to maintain profitability of dairy production. Furthermore, an October 2010 study by The Innovation Center for US Dairy to assess the carbon footprint of fluid milk found that the efficiency of feed conversion is the single greatest factor contributing to variation in the carbon footprint because of its effects on methane release during enteric fermentation and from manure. Thus, we are conducting research in contemporary US Holsteins to identify cows most efficient at converting feed to milk in temperate climates using residual feed intake (RFI), a measure used successfully to identify the beef cattle most efficient at converting feed to gain. Residual feed intake is calculated as the difference between predicted and actual feed intake to support maintenance and production (e.g., growth in beef cattle, or milk in dairy cattle). Heritability estimates for RFI in dairy cattle reported in the literature range from 0.01 to 0.38. Selection for a decreased RFI phenotype can reduce feed intake, methane production, nutrient losses in manure, and visceral organ weights substantially in beef cattle. We have estimated RFI during early lactation (i.e., to 90 d in milk) in the Beltsville Agricultural Research Center Holstein herd and observed a mean difference of 3.7 kg/d (P < 0.0001) in actual DMI between the efficient and inefficient groups (±0.5 SD from the mean RFI of 0), with no evidence of differences (P > 0.20) in mean BW, ADG, or energy-corrected milk exhibited between the 2 groups. These results indicate promise for using RFI in dairy cattle to improve feed conversion to milk. Previous and current research on the use of RFI in lactating dairy cattle are discussed, as well as opportunities to improve production efficiency of dairy cattle using RFI for milk production.  相似文献   

15.
The benefit of using genomic breeding values (GEBV) in predicting ADG, DMI, and residual feed intake for an admixed population was investigated. Phenotypic data consisting of individual daily feed intake measurements for 721 beef cattle steers tested over 5 yr was available for analysis. The animals used were an admixed population of spring-born steers, progeny of a cross between 3 sire breeds and a composite dam line. Training and validation data sets were defined by randomly splitting the data into training and testing data sets based on sire family so that there was no overlap of sires in the 2 sets. The random split was replicated to obtain 5 separate data sets. Two methods (BayesB and random regression BLUP) were used to estimate marker effects and to define marker panels and ultimately the GEBV. The accuracy of prediction (the correlation between the phenotypes and GEBV) was compared between SNP panels. Accuracy for all traits was low, ranging from 0.223 to 0.479 for marker panels with 200 SNP, and 0.114 to 0.246 for marker panels with 37,959 SNP, depending on the genomic selection method used. This was less than accuracies observed for polygenic EBV accuracies, which ranged from 0.504 to 0.602. The results obtained from this study demonstrate that the utility of genetic markers for genomic prediction of residual feed intake in beef cattle may be suboptimal. Differences in accuracy were observed between sire breeds when the random regression BLUP method was used, which may imply that the correlations obtained by this method were confounded by the ability of the selected SNP to trace breed differences. This may also suggest that prediction equations derived from such an admixed population may be useful only in populations of similar composition. Given the sample size used in this study, there is a need for increased feed intake testing if substantially greater accuracies are to be achieved.  相似文献   

16.
Three experiments were conducted to examine the effect of dietary vitamin E on receiving performance and health and on finishing performance of beef cattle. One hundred twenty beef steers (Exp. 1; initial BW = 173 kg) and 200 beef heifers (Exp. 2; initial BW = 204 kg) were assigned randomly to one of three treatment diets formulated to supply 285, 570, or 1,140 IU/animal daily of supplemental vitamin E during the receiving period. Average daily gain, gain:feed, and DMI were calculated every 14 d, with pen as the experimental unit. Morbidity and retreatment data were analyzed using a nonparametric procedure. After the receiving period, cattle were assigned to a grazing period followed by a finishing program and fed until slaughter. In Exp. 3, 17 beef steers were used to evaluate effects of the same three vitamin E levels on humoral immune response to an ovalbumin vaccine given on d 0 and 14. Jugular blood samples were collected on d 0, 7, 14, and 21. In Exp. 1, vitamin E did not affect (P > 0.10) ADG, DMI, or gain:feed for d 0 to 14, 14 to 28, or 0 to 28. No effects were noted for percentage of morbidity; however, cattle receiving 1,140 IU/d had a numerically (P = 0.15) lower incidence of retreatment. During the 91-d finishing phase, a quadratic effect (P < 0.08) was noted for DMI, ADG, backfat thickness, longissimus muscle area, and yield grade. In Exp. 2, a tendency for a linear (P = 0.10) increase in ADG was observed for the first 14 d of receiving; however, ADG decreased linearly (P = 0.06) with vitamin E concentration thereafter. For the 28-d period, ADG and DMI did not differ among treatments, but gain:feed decreased linearly (P < 0.05) for d 14 to 28 and for d 0 to 28. No effects on percentage morbidity were noted in Exp. 2, and no differences were detected for ADG, gain:feed, or DMI for the 98-d finishing period. There was a linear increase in yield grade (P < 0.05) and a linear (P < 0.08) decrease in longissimus muscle area with increasing vitamin E. Heifers receiving 570 IU of vitamin E during the receiving period tended to have a higher (P < 0.09) dressing percentage at slaughter. In Exp. 3, no significant differences were detected in serum IgG titers to ovalbumin on d 0, 7 or 14; however, on d 21, a linear increase (P = 0.07) in serum IgG titers was noted with supplemental vitamin E. Supplemental vitamin E had limited effects on performance; however, effects on humoral immune response and recovery from respiratory disease warrant further research.  相似文献   

17.
Most studies on feed efficiency in beef cattle have focused on performance in young animals despite the contribution of the cow herd to overall profitability of beef production systems. The objective of this study was to quantify, using a large data set, the genetic covariances between feed efficiency in growing animals measured in a performance-test station, and beef cow performance including fertility, survival, calving traits, BW, maternal weaning weight, cow price, and cull cow carcass characteristics in commercial herds. Feed efficiency data were available on 2,605 purebred bulls from 1 test station. Records on cow performance were available on up to 94,936 crossbred beef cows. Genetic covariances were estimated using animal and animal-dam linear mixed models. Results showed that selection for feed efficiency, defined as feed conversion ratio (FCR) or residual BW gain (RG), improved maternal weaning weight as evidenced by the respective genetic correlations of -0.61 and 0.57. Despite residual feed intake (RFI) being phenotypically independent of BW, a negative genetic correlation existed between RFI and cow BW (-0.23; although the SE of 0.31 was large). None of the feed efficiency traits were correlated with fertility, calving difficulty, or perinatal mortality. However, genetic correlations estimated between age at first calving and FCR (-0.55 ± 0.14), Kleiber ratio (0.33 ± 0.15), RFI (-0.29 ± 0.14), residual BW gain (0.36 ± 0.15), and relative growth rate (0.37 ± 0.15) all suggest that selection for improved efficiency may delay the age at first calving, and we speculate, using information from other studies, that this may be due to a delay in the onset of puberty. Results from this study, based on the estimated genetic correlations, suggest that selection for improved feed efficiency will have no deleterious effect on cow performance traits with the exception of delaying the age at first calving.  相似文献   

18.
Growth, feed intake, and temperament indicator data, collected over 5 yr on a total of 1,141 to 1,183 mixed-breed steers, were used to estimate genetic and phenotypic parameters. All steers had a portion of Hereford, Angus, or both as well as varying percentages of Simmental, Charolais, Limousin, Gelbvieh, Red Angus, and MARC III composite. Because the steers were slaughtered on various dates each year and the animals thus varied in days on feed, BW and feed data were adjusted to a 140-d feeding period basis. Adjustment of measures of feed efficiency [G:F or residual feed intake (RFI), intake adjusted for metabolic body size, and BW gain] for body fatness recorded at slaughter had little effect on the results of analyses. Average daily gain was less heritable (0.26) than was midtest BW (MBW; 0.35). Measures of feed intake had greater estimates of heritability, with 140-d DMI at 0.40 and RFI at 0.52; the heritability estimate for G:F was 0.27. Flight speed (FS), as an indicator of temperament, had an estimated heritability of 0.34 and a repeatability of 0.63. As expected, a strong genetic (0.86) correlation was estimated between ADG and MBW; genetic correlations were less strong between DMI and ADG or MBW (0.56 and 0.71). Residual feed intake and DMI had a genetic correlation of 0.66. Indexes for phenotypic RFI and genotypically restricted RFI (no correlation with BW gain) were compared with simple economic indexes incorporating feed intake and growth to elucidate expected selection responses under different criteria. In general, few breed differences were detected across the various measurements. Heterosis contributed to greater DMI, RFI, and MBW, but it did not significantly affect ADG, G:F, or FS. Balancing output (growth) with input costs (feed) is needed in practicing selection, and FS would not be recommended as an indicator trait for selection to change feed efficiency. An index including BW gain and RFI produced the best economic outcome.  相似文献   

19.
旨在探究快速型黄羽肉鸡饲料利用效率性状的遗传参数,评估不同方法所得估计育种值的准确性。本研究以自主培育的快速型黄羽肉鸡E系1 923个个体（其中公鸡1 199只,母鸡724只）为研究素材,采用"京芯一号"鸡55K SNP芯片进行基因分型。分别利用传统最佳线性无偏预测（BLUP）、基因组最佳线性无偏预测（GBLUP）和一步法（SSGBLUP）3种方法,基于加性效应模型进行遗传参数估计,通过10倍交叉验证比较3种方法所得估计育种值的准确性。研究性状包括4个生长性状和4个饲料利用效率性状：42日龄体重（BW42D）、56日龄体重（BW56D）、日均增重（ADG）、日均采食量（ADFI）和饲料转化率（FCR）、剩余采食量（RFI）、剩余增长体重（RG）、剩余采食和增长体重（RIG）。结果显示,4个饲料利用效率性状均为低遗传力（0.08~0.20）,其他生长性状为中等偏低遗传力（0.11~0.35）;4个饲料利用效率性状间均为高度遗传相关,RFI、RIG与ADFI间为中度遗传相关,RFI与ADG间无显著相关性,RIG与ADG间为低度遗传相关。本研究在获得SSGBLUP方法的最佳基因型和系谱矩阵权重比基础上,比较8个性状的估计育种值准确性,SSGBLUP方法获得的准确性分别比传统BLUP和GBLUP方法提高3.85%~14.43%和5.21%~17.89%。综上,以RIG为选择指标能够在降低日均采食量的同时保持日均增重,比RFI更适合快速型黄羽肉鸡的选育目标;采用最佳权重比进行SSGBLUP分析,对目标性状估计育种值的预测性能最优,建议作为快速型黄羽肉鸡基因组选择方法。  相似文献   

20.
Residual expressions of enteric emissions favor a more equitable identification of an animal’s methanogenic potential compared with traditional measures of enteric emissions. The objective of this study was to investigate the effect of divergently ranking beef cattle for residual methane emissions (RME) on animal productivity, enteric emissions, and rumen fermentation. Dry matter intake (DMI), growth, feed efficiency, carcass output, and enteric emissions (GreenFeed emissions monitoring system) were recorded on 294 crossbred beef cattle (steers = 135 and heifers = 159; mean age 441 d (SD = 49); initial body weight (BW) of 476 kg (SD = 67)) at the Irish national beef cattle performance test center. Animals were offered a total mixed ration (77% concentrate and 23% forage; 12.6 MJ ME/kg of DM and 12% CP) ad libitum with emissions estimated for 21 d over a mean feed intake measurement period of 91 d. Animals had a mean daily methane emissions (DME) of 229.18 g/d (SD = 45.96), methane yield (MY) of 22.07 g/kg of DMI (SD = 4.06), methane intensity (MI) 0.70 g/kg of carcass weight (SD = 0.15), and RME 0.00 g/d (SD = 0.34). RME was computed as the residuals from a multiple regression model regressing DME on DMI and BW (R2 = 0.45). Animals were ranked into three groups namely high RME (>0.5 SD above the mean), medium RME (±0.5 SD above/below the mean), and low RME (>0.5 SD below the mean). Low RME animals produced 17.6% and 30.4% less (P < 0.05) DME compared with medium and high RME animals, respectively. A ~30% reduction in MY and MI was detected in low versus high RME animals. Positive correlations were apparent among all methane traits with RME most highly associated with (r = 0.86) DME. MY and MI were correlated (P < 0.05) with DMI, growth, feed efficiency, and carcass output. High RME had lower (P < 0.05) ruminal propionate compared with low RME animals and increased (P < 0.05) butyrate compared with medium and low RME animals. Propionate was negatively associated (P < 0.05) with all methane traits. Greater acetate:propionate ratio was associated with higher RME (r = 0.18; P < 0.05). Under the ad libitum feeding regime deployed here, RME was the best predictor of DME and only methane trait independent of animal productivity. Ranking animals on RME presents the opportunity to exploit interanimal variation in enteric emissions as well as providing a more equitable index of the methanogenic potential of an animal on which to investigate the underlying biological regulatory mechanisms.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号