共查询到20条相似文献,搜索用时 656 毫秒
1.
曲线和曲面拟合的改进缩张算法 总被引:1,自引:0,他引:1
本文对缩张算法进行了多处改进,其中最主要的是与基于数值微分的改良高斯-牛顿法相结合,形成了曲线与曲面拟合的改进缩张算法。新算法不需提供非线性方程的偏导数,但可利用近似偏导数指导搜索方向,提高搜索效率。改进缩张算法减少了复杂非线性方程拟合的运算负荷,提高了利用度点反馈调节搜索步长和区域的敏感度,增强了跳出局部最优陷阱的能力。新算法可在较大初值范围内实现全局最优拟合。本文以3个不同类型的实例验证了新算法的拟合功效。编制了可动态显示拟合过程的Matlab程序,可供曲线和曲面拟合应用者使用。 相似文献
2.
3.
根据瞬变电磁场理论公式中的响应和自变量之间的关系特点,提出用非线性方程模式的BP神经网络求解电阻率。通过构造单输入单输出网络结构,建立以不同时间点上的电流归一化的感应电压值为输入、视电阻率值为输出的神经网络,来拟合瞬变电磁场的二次涡流曲线。利用数值方法计算出的数据验证该训练网络的精确性,比较了不同算法对训练精度和收敛速度产生的影响。以重庆大学某处的防空洞探测实验为例验证了该算法的有效性,该算法避开具体的复杂电磁场计算或数值反问题计算,从而实现电阻率快速计算,为快速成像准备必要条件。 相似文献
4.
5.
6.
非线性方程最优拟合的缩张算法 总被引:22,自引:3,他引:19
本文提出一种可实现非线性方程最优拟合的新方法-缩张算法(C-E算法)。该算法由若干循环组成,每一循环都包含收缩和扩张两个步骤。因而,可以在多维起始空间的内、外漫游搜索目标函数,并利用搜索过程所反馈的信息调整搜索中心和步长;通过较少次C-E循环的搜索,便能逼近给定非线性方程的最适参数值。该算法不需要给出方程的导数或偏导数,减少了计算的复杂性,也可能推广应用于解决其它目标函数的最优化问题。 相似文献
7.
8.
劳动力需求曲线的推导和描述是“劳动经济学”教学和科研中的基本问题,“十一五”国家级规划教材《劳动经济学》对企业短期和长期劳动力需求曲线进行了较细致的描述推导,然而其推导过程存在若干疑问和矛盾.论文在对规划教材中推导过程提出若干质疑的基础上,对短期和长期劳动力需求曲线进行了再推导,并对两者之间的关系进行了重新描述和解释. 相似文献
9.
1 种子生产基地建设中的“硬件”建设
生产基地建设中的“硬件”是指种子生产所需的物质条件。生产基地要具备满足种子生产要求的气候、土地、加工、仓储、运输等条件。良好的生产条件无疑会确保种子的产量和质量,也就降低了生产成本。生产基地建设要先进行周密的选址规划,再进行必要的基础设施建设。 相似文献
10.
11.
This paper proposes a novel BP network model based on nonlinear iterative partial least-squares algorithm which can fit nonlinear data. The novel BP network model can reduce iterative step number and advance learning effieieney. This paper pretreats data by nonlinear iterative partial least-squares algorithms. The weights initialization of input floor and output floor are set by applying the loading weights of dependent variable and cause variable, the member of hidden nodes are set by applying factor numbers of nonlinear iterative partial leastsquares algorithm, the connection co- efficient is set by applying the connection matrix B. Performances of the BP, PLS, and PLS-BP are analyzed and compared. The results show that the PLS-BP has better fitting and forecasting than BP and PLS. 相似文献
12.
将改进的智能预测技术应用于储粮横向通风过程中的粮堆温度预测,为粮食通风智能预测与决策提供了一种新思路。选取河北清苑国家粮食储备库冬季横向通风的实时监测数据,在分析主要影响因素的基础上,应用三种智能优化算法——网格寻优算法、GA遗传算法寻优、PSO粒子群算法,结合回归支持向量机理论,对粮堆的通风过程进行建模。结果表明,优化过的回归预测模型能较好地拟合粮食温度与其他变量之间的非线性关系,尤其是当样本数量较为有限时,该方法具有更高的拟合精度,更适合对储粮通风这一强非线性过程的预测研究,对于人工干预操作具有一定的现实指导意义。 相似文献
13.
For non-ideal interpolation results of complex implicit nonlinear functions between non-normal distribution response and standard normal distribution inputs using stochastic response surface method, radial basis functions was used to replace Hermite polynomials so as to solve complex implicit nonlinear function interpolation problem for its excellent performance on scattered data interpolation. A few nonlinear analytical functions and uncertainty problems of the load carrying capacity of single circular concrete filled steel tubule (CFST) arch were used as examples to test and verify the precision of proposed method in non-normal distribution response interpolation and its engineering applicability. The results show that stochastic response surface method based on radial basis functions performs well in fitting highly nonlinear input implicit functions, and can achieve high precision on multi-parameters CFST arch load carrying capacity uncertainty problems. Meanwhile, the method has less sample points compared to the Hermite polynomials method. 相似文献
14.
土-水特征曲线(SWCC)用于描述非饱和土中含水量与基质吸力的关系,在非饱和土力学中具有重要的作用。在SWCC拟合模型中有多个拟合参数,各值通过实验方法获得且具有很大的不确定性。采用贝叶斯理论对拟合参数的不确定性进行分析,将SWCC拟合参数作为随机变量,采用Van Genuchten模型拟合花岗岩残积土的土-水特征曲线试验数据。以马尔可夫链蒙特卡罗方法的延迟拒绝适应性算法获得模型参数后验分布抽样,获得了不同置信区间的SWCC及其对应参数值。 相似文献
15.
The creep analysis of concrete is of great importance in stress calculation and deformation analysis of concrete structures. Since many factors affect concrete creep, the creep function is highly nonlinear, making it difficult to obtain satisfactory results using the traditional regression method. The gene expression programming (GEP) method, which combines the advantages of GA and gene programming, shows great promise and capability of data mining in nonlinear fitting. Based on theoretical analysis of GEP, the data mining model of the creep function was established by using GEP. Examples indicate this model is more accurate than functions obtained by conventional methods. 相似文献
16.
17.
不同性别闽南火鸡生长模型的拟合与分析 总被引:1,自引:1,他引:0
为了解闽南火鸡的生长发育规律,对不同性别火鸡生长曲线选择较为适宜的拟合方程,比较公、母火鸡生长模式差异。本研究运用Logistic、Gompertz和Von Bertalanffy 3种非线性生长模型对不同性别的福建闽南火鸡0~8月龄体重生长数据进行曲线拟合和分析。结果表明:3种模型均能较好的模拟闽南火鸡的生长曲线,拟合度(R2)均达0.992以上,其中以Gompertz生长曲线拟合效果最佳,公、母火鸡拟合度均为0.997;公、母火鸡的拐点月龄分别为4.26、2.63月,拐点体重分别为2799.40、1266.67 g,最大月增重分别为929.40、587.73 g。利用 Gompertz 生长曲线拟合闽南火鸡各种指标能够揭示其生长规律,较好地掌握不同性别闽南火鸡生长过程的特性,结果为确定不同时期饲料最佳用量、实施科学的饲养管理提供参考信息。 相似文献
18.
为了探究不同肉鸽品种的生长发育规律,采用Logistic、Gompertz、von Bertalanffy、MMF(Morgan-Mercer-Flodin)和Weibull 五种模型进行生长曲线拟合,对0-4周龄的欧鸽(欧洲肉鸽)、白卡奴鸽和白羽王鸽体重生长规律进行研究。结果表明:白卡奴鸽和白羽王鸽两个肉鸽品种除了在4周龄时存在显著差异外,其他各周龄间体重差异不显著,但都显著低于欧鸽,整体生长发育变化呈现一致趋势。欧鸽绝对生长量均显著高于白卡奴鸽和白羽王鸽,相对生长率曲线基本上处于重叠状态。曲线拟合结果显示:五种模型均能很好的模拟肉鸽生长曲线,其拟合度都达到 0.9 以上,欧鸽和白羽王鸽的最优拟合曲线为Weibull,R2=1.000,而白卡奴鸽的最优拟合曲线为MMF,R2=0.999。有固定拐点的生长模型有一定的限制,有灵活拐点的生长模型有更好的适用性,同时四参数生长模型要好于三参数生长模型,推荐使用四参数有灵活拐点的生长模型来拟合肉鸽生长曲线。拐点数据显示第一周属于乳鸽生长关键期,因此该时期要加强种鸽饲养管理。 相似文献
19.
"贵州农业生物资源调查"项目产生了大量数据资料,采用有效的方法分析这些资料有利于全面了解当地生物资源的利用和保护情况,可为决策部门制定资源保护策略和进一步科学研究提供依据。分析了不同的可视化方法,针对以往调查数据研究结果呈现不直观等特点,本文采用Microsoft Excel、GIS和R多种手段对调查数据进行可视化研究,并分析了可视化的结果。试验结果表明,电子表格可做简单的统计分析;空间数据可视化方法可用于数据校验、显示种质资源富集程度;统计分析可视化方法整合了不同类型的数据,可用于挖掘出隐藏在数据中的信息。多种数据可视化手段可使数据及分析结果以更直观的形式呈现,有助于全面了解生物资源,促进资源充分利用。分析了作物种质资源调查过程中存在的问题,对进一步规范种质调查数据提出了建议。 相似文献
20.
Based on the discussion of the simulation for the cable prestress, the rigidity theory was used to identify the geometrical dimensions of semi-rigid structures in zero state. When the structural geometry in initial state is given, the geometrical dimension in zero state is determined by the initial prestress distribution. The contribution-matrix method is firstly applied to get the initial lack of fit. However, the influencing factor of initial lack of fit on the displacement of control point is linear superposition, that is, the structural response is linear, and it is irreconcilable with the geometry nonlinear of semi-rigid structure. In order to reduce the error of nonlinear structural response, the influencing factor in the contribution-matrix method is revised, and modified contribution-matrix method is put forward. Programs by ANSYS parameter design language APDL are worked out for the form-finding analysis of beam-string structure of a practical project. The numerical results show that the modified contribution-matrix method reduces the errors of the assumption of structural linear response. And it can be applied to the form-finding of semi-rigid structures with small stiffness. 相似文献