首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 23 毫秒
1.
Thermal modification of wood is an environment-friendly alternative method for improving several properties of wood without the use of chemicals. This paper deals with the examination of color and chemical changes in spruce (Picea abies L.) and oak wood (Quercus robur F.) that occur due to thermal treatment. The thermal modification was performed at 160, 180, and 210 °C according to thermowood process. The color changes were measured by the spectrophotometer and described in the L*a*b* color system. Chemical changes were examined by wet chemistry methods, infrared spectroscopy and liquid chromatography. During the experiment, oak samples showed smaller color changes than spruce samples at all temperature values. During thermal modification, the content of cellulose, lignin, and extractives increases; however, the hemicellulose content drops by 58.85% (oak) and by 37.40% (spruce). In addition to deacetylation, new carbonyl and carboxyl groups are formed as a result of oxidation. Bonds in lignin (mainly β-O-4) and methoxyl groups are cleaved, and lignin is condensed at higher temperatures.  相似文献   

2.
The wood–adhesive interface was analyzed using five methods with the objective of quantitatively assessing penetration of adhesive into the porous wood network. Methods included fluorescence microscopy, scanning electron microscopy, backscatter electron imaging, wavelength dispersive spectroscopy, and X-ray microtomography (XMT). Each method provided a visual inspection, and all of the analysis methods were applied to the same field of view. XMT was the primary technique of interest. Rubidium hydroxide was used in place of sodium hydroxide in the formulation of phenol–formaldehyde adhesive. Rubidium was found to increase the X-ray attenuation of the adhesive. However, rubidium migrated beyond the adhesive interphase during specimen preparation, thus reducing its effectiveness for image contrast enhancement. The wood species studied included red oak (Quercus rubra), Douglas-fir (Pseudotsuga menziesii), and hybrid poplar (Populus deltoides × Populus trichocarpa). All techniques used for this study were useful, but each presented some limitations for bondline analysis. Despite the problem with rubidium migration, XMT for this application was promising.  相似文献   

3.

Key message

The high flammability of some companion species in Quercus suber forests, estimated in laboratory tests, could potentially generate an increase in fire vulnerability and in fire risk.

Context

Recurrent wildfire is one of the main causes of forest degradation, especially in the Mediterranean region. Increased fire frequency and severity due to global change could reduce the natural resilience of cork oak to wildfire in the future. Hence, it is important to evaluate the flammability of companion species in cork oak forests in the particularly dry bioclimatic conditions of North Africa.

Aims

This study aimed to assess and compare flammability parameters at laboratory scale among ten companion frequent species in cork oak forests.

Methods

Fuel samples were collected in a cork oak (Quercus suber L) forest in the southern part of the mountains of Tlemcen (Western Algeria). A series of flammability tests were carried out using a Mass Loss Calorimeter device (FTT ®). A cluster analysis to classify flammability of the selected species was conducted using the K-means algorithm.

Results

The results revealed differences in the four flammability parameters (ignitability, sustainability, combustibility and consumability), in both fresh and dried fine fuel samples from Quercus suber, Pinus halepensis, Quercus ilex, Quercus faginea, Erica arborea, Arbutus unedo, Pistacia lentiscus, Calicotome spinosa, Juniperus oxycedrus and Tetraclinis articulata. Application of the K-means clustering algorithm showed that C. spinosa, T. articulata, J. oxycedrus and P. halepensis are highly flammable because of their high combustibility and sustainability.

Conclusion

The findings identify species that could potentially increase the vulnerability of cork oak forests to forest fires.
  相似文献   

4.
We aimed at identifying which drivers control the spatio-temporal variability of fruit production in three major European temperate deciduous tree species: Quercus robur, Quercus petraea and Fagus sylvatica. We analysed the relations of fruit production with airborne pollen, carbon and water resources and meteorological data in 48 French forests over 14 years (1994–2007). In oak, acorn production was mainly related to temperature conditions during the pollen emission period, supporting the pollen synchrony hypothesis. In beech, a temperature signal over the two previous years eclipsed the airborne pollen load. Fruit production in Quercus and Fagus was related to climate drivers, carbon inputs and airborne pollen through strongly nonlinear, genus-specific relations. Quercus and Fagus also differed as regards the secondary growth versus fructification trade-off. While negative relationships were observed between secondary growth and fruit production in beech, more productive years benefited to both secondary growth and reproductive effort in oak.  相似文献   

5.
This study examined the effects of climatic conditions on tree-ring widths of red oak (Quercus rubra), sugar maple (Acer saccharum) and American beech (Fagus grandifolia) at their northern distribution limit in Mont St. Hilaire, eastern Canada. A residual chronology of tree-ring width index was developed for each species. The tree-ring width of Q. rubra showed negative and positive correlations with May temperature and June precipitation in the current year, respectively. A. saccharum also showed similar patterns with Q. rubra, i.e., negative and positive correlations with June temperature and precipitation in the current year, respectively. F. grandifolia showed neither positive nor negative correlations with temperature and precipitation. The expressed population signals of tree-ring width chronologies of the three species indicated that climatic factors more greatly influenced the variations in tree-ring widths in the order Q. rubra > A. saccharum > F. grandifolia. Therefore, the radial growth of Q. rubra was most restricted by drought stress in early summer among the three species. Global warming is suggested to affect the radial growth of the three species differently by increasing drought stress at Mont St. Hilaire in eastern Canada.  相似文献   

6.
During June 2013 to March 2014, several visits were made to the truffle-bearing areas of Kermanshah province, Iran. In this study, two specimens associated with roots of oak (Quercus brantii Lindl.) were identified as Tuber aestivum Vittad based on morphological and cytological characteristics. Internal transcribed spacer (ITS) region was amplified by PCR using primer pair ITS1/ITS4 and the sequences were analyzed. Phylogenetic trees constructed based on ITS sequences revealed that all Iranian specimens were in the same branch in a clade with T. aestivum reported from others. All T. aestivum sequences, including Iranian specimen, showed an average of 97 % similarity (ranged from 96 to 100 %). The results of physico-chemical analyses on soil samples collected from oak forest indicated that T. aestivum was prevalent in the sandy soil with rather low phosphorus concentration, low in organic matter, and high CaCo3. To our knowledge, this is the first report of T. aestivum and its host plant from Iran.  相似文献   

7.
Binderless boards are composite boards that rely on self-bonding mechanisms for inter-fibre bonding. Quercus acutissima and Quercus serrata logs degraded by Lentinula edodes (shiitake fungi) were used in this study to investigate whether physical and chemical changes induced by shiitake fungi can enhance board mechanical properties. Binderless boards were manufactured with 0.8 g/cm3 target density, 220 °C pressing temperature, 5 MPa pressure, and pressing duration of 10 min. Boards made from logs degraded for ≥?26 months were stronger than control boards and met modulus of rupture (MOR) and internal bonding (IB) requirements for fibreboards. Chemical composition and particle size distribution of the wood powder used to make the boards were determined to elucidate the drivers of board mechanical properties. The proportion of small particles (<?150 µm) showed a strong positive correlation with MOR for both species and hot water extractives showed a strong positive correlation with IB for Q. acutissima boards. Introduction of shiitake fungi pre-treatment to the production process may enhance the mechanical strength of binderless boards.  相似文献   

8.
There is little knowledge how ungulate pressure on forest regeneration may be mitigated by silvicultural methods. The knowledge is especially needed for artificially regenerated, deciduous tree species. We studied factors affecting browsing incidence by deer in the Pisz Forest District in Poland, an area where 10,000 ha of forest was damaged by a 2002 hurricane. In 2006, we established three experimental plots (in total, 22.6 ha), in which the main species was Scots pine (Pinus sylvestris) admixed with pedunculate oak (Quercus robur). The data on browsing were collected in 2008–2015. In general, oak browsing incidence was unrelated to oak planting density. On a plantation scale, it was significantly affected by the pine age. Although in each variant all the oaks were browsed for four consecutive years (2009–2012), in 2013 browsing incidence began to decrease. When the pines grew higher and formed a physical barrier, it was harder for deer—roe deer (Capreolus capreolus), red deer (Cervus elaphus) and moose (Alces alces)—to move through and locate the oaks. Moreover, within plantations, oak browsing incidence was higher in the patches with shorter pines. Browsing of individual saplings or small groups of saplings was also negatively affected by the height of neighbouring pine saplings. Oak density influenced deer selectivity depending on the tree height. In a low oak tree density, browsing incidence was unrelated to oak height, while in higher tree density, deer selected oaks of the height between 40 and 100 cm. We postulate that deciduous admixture in a coniferous (unattractive) stand can be planted with a few year delay. Older coniferous trees should impede locating of attractive tree species by deer and the browsing incidence.  相似文献   

9.
Within-stem variations in the mechanical properties of 17–19-year-old Melia azedarach planted in two sites in northern Vietnam were examined by destructive and nondestructive methods. Wood samples were collected from 10, 50, and 90% of the radial length from pith on both sides (North and South) at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground. The mean values in whole trees of wood density (WD), modulus of rupture (MOR), modulus of elasticity (MOE), and dynamic modulus of elasticity (Ed) at 12% moisture content were 0.51 g/cm3, 78.58 MPa, 9.26 GPa, and 10.93 GPa, respectively. Within the stem, the radial position was a highly (p?<?0.001) significant source of variation in mechanical properties. MOR, MOE, and Ed increased from pith to bark. WD had a strong positive linear relationship with both MOR (r?=?0.85, p?<?0.001) and MOE (r?=?0.73, p?<?0.001). This suggests that it is potentially possible to improve mechanical properties through controlling WD. MOR had also a strong linear relationship with Ed (r?=?0.84, p?<?0.001). This indicates that Ed is a good indicator to predicting the strength of wood if the density of measured element is known. Besides, the stress wave method used in this study provides relatively accurate information for determining the stiffness of Melia azedarach planted in northern Vietnam.  相似文献   

10.

Context and aim

This study aimed to examine the effect of the tension wood G‐layer on the viscoelastic properties of wood.

Methods

Tension wood and opposite wood samples were obtained from six French Guianese tropical rainforest species (Sextonia rubra, Ocotea guyanensis, Inga alba, Tachigali melinoni, Iyranthera sagotiana and Virola michelii); the tension wood of the former three of these species had a G‐layer, whilst the tension wood from the latter three had no G‐layer. Tensile dynamic mechanical analysis (DMA) was performed on green never dried wood samples in the longitudinal direction with samples submerged in a water bath at a temperature (30°C) and frequency (1 Hz) representative of the conditions experienced by wood within a living tree. Then, DMA was repeated with samples conditioned to an air-dried state. Finally, samples were oven-dried to measure longitudinal shrinkage.

Results

Tension wood did not always have a higher longitudinal storage (elastic) modulus than opposite wood from the same tree regardless of the presence or absence of a G‐layer. For the species containing a G‐layer, tension wood had a higher damping coefficient and experienced a greater longitudinal shrinkage upon drying than opposite wood from the same species. No difference was found in damping coefficients between tension wood and opposite wood for the species that had no G‐layer.

Conclusion

It is proposed that the different molecular composition of the G-layer matrix has an influence on the viscoelasticity of wood, even if a biomechanical gain is not yet clear. This study shows that rheological properties and longitudinal shrinkage can be used to detect the presence of a G‐layer in tension wood.
  相似文献   

11.
Decomposition dynamics were compared among green tree leaves, partially decomposed tree leaf litter (i.e., decayed tree leaf litter on forest floor) and a mixture of the two in a warm temperate forest ecosystem in central China to test the influence of litter chemical quality on the degree of decomposition. The study was conducted in situ at two contrasting forest sites, an oak forest dominated by Quercus aliena var. acuteserrata Maxim., and a mixed pine and oak forest dominated by Pinus armandii Franch. and Q. aliena var. acuteserrata. We found marked differences in the rate of decomposition among litter types at both forest sites; the litter decomposition constant, k, was about 39 % greater at the oak forest site and more than 70 % greater at the pine-oak forest site, for green leaves than for partially decomposed leaf litter. The decomposition dynamics and temporal changes in litter chemistry of the three litter types also greatly differed between the two forest sites. At both forest sites, the higher rate of decomposition for the green leaves was associated with a higher nitrogen (N) content and lower carbon to N ratio (C/N) and acid-unhydrolyzable residue to N ratio (AUR/N). We did not find any non-additive effects when mixing green leaves and partially decomposed leaf litter. Our findings support the contention that litter chemical quality is one of the most important determinants of litter decomposition in forest ecosystems at the local or regional scale, but the effect of litter chemical quality on decomposition differs between the contrasting forest types and may vary with the stage of decomposition.  相似文献   

12.
The naturally occurring Verticillium nonalfalfae shows promise for biocontrol of the highly invasive Tree of Heaven (Ailanthus altissima), but might also bear a risk for non-target tree species. In this study, we conducted inoculations on potted seedlings of A. altissima as well as on eight indigenous and two invasive tree species associated with Tree of Heaven in Austria. Although vascular discolourations developed in all inoculated tree species, V. nonalfalfae was reisolated from Ailanthus and eight of the ten non-target-species, whereas typical disease symptoms and mortality only occurred on A. altissima. Results confirmed high susceptibility (S) of A. altissima to V. nonalfalfae but indicated tolerance (T) of Acer campestre, Acer pseudoplatanus and Quercus robur, possible resistance (PR) of Fraxinus excelsior, Populus nigra, Tilia cordata, Ulmus laevis and Ulmus minor and resistance (R) of Fraxinus pennsylvanica and Robinia pseudoacacia to this potential biocontrol agent. Results from seedling inoculations were confirmed by cursory field observations in Ailanthus-inoculated forest stands, where admixed A. campestre, A. pseudoplatanus, F. excelsior, Populus alba, R. pseudoacacia and U. laevis canopy trees remained asymptomatic, while mortality was induced in Ailanthus.  相似文献   

13.
Niche differentiation, in terms of time and space, has been reported within a community of ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) in a tree trunk. Two platypodid ambrosia beetles, Platypus quercivorus (Murray) and Platypus calamus Blandford, utilize a similar height range with respect to the Quercus serrata Murray (Fagaceae) trunk. The sapwood and heartwood (i.e., wood types) are known to differ in their physical and chemical characteristics. The objective of this study was to determine the differences among ambrosia beetles, in terms of wood type preferences, in a Q. serrata tree trunk. We analyzed the horizontal distribution patterns of ambrosia beetles within two mature Q. serrata tree trunks. Platypus calamus and the other ambrosia beetles [P. quercivorus, Ambrosiodmus lewisi (Blandford), Ambrosiophilus atratus Eichhoff, and Xyleborus sp.] showed different horizontal distribution patterns within the wood. The former tended to utilize the heartwood, whereas the latter utilized the sapwood. These results suggest that the wood type can be regarded as one of the niche dimensions of ambrosia beetles in a Q. serrata trunk.  相似文献   

14.
Natural forest recovery on abandoned farmland is hindered by a variety of factors and active restoration plays an important role when quick afforestation is desired. We investigated seedling survival of four transplanted native tree species (Quercus myrsinifolia, Quercus serrata, Aphananthe aspera, and Rhus sylvestris) by experimentally manipulating the vegetation cover, which was mainly dominated by dwarf bamboo (Pleioblastus chino), and herbivore access to the planting sites on farmland that had been abandoned for 15 years at the start of the study. Few transplanted seedlings of any species survived under intact vegetation cover, irrespective of herbivore presence. In gaps in the vegetation cover, winter browsing by Japanese hare (Lepus brachyurus) damaged all species. However, lower browsing frequency and higher resprouting ability after grazing of the seedlings enabled both Quercus species to survive better than the other species. These results indicate that dwarf bamboo and the hare jointly limit the establishment of native trees in old fields. If active afforestation by transplanting seedlings at sites dominated by dwarf bamboo is planned, a combination of vegetation removal, selection of suitable species, and temporary seedling protection will be most effective.  相似文献   

15.
To advance our understanding of the effects of inoculation with ectomycorrhizal fungi (EMF) on seedling colonization in mine wastelands, we conducted a field experiment in a copper tailing. Six-month-old seedlings of Japanese red pine (Pinus densiflora) and oak (Quercus variabilis) separately inoculated with three EMF species (Pisolithus sp., Cenococcum geophilum, Laccaria laccata) were transplanted to the copper tailing. The survival rates of tree seedlings were monitored monthly, and growth (biomass and height), contents of nutrients and heavy metals (K, P, Ca, Mg, Cu, Zn), and mycorrhizal infection rates of seedlings were determined 6 months after planting. Oak seedlings exhibited higher survival rates than pine seedlings after 6 months of growth on the tailing. EMF inoculations of pine seedlings significantly enhanced their survival, growth, and nutrient uptake. In contrast, EMF inoculations of oak seedlings improved growth only in terms of biomass. Additionally, EMF inoculation caused pine seedlings to accumulate more Cu and Zn in roots compared to non-inoculated seedlings, whereas inoculation inhibited the accumulation of heavy metals in shoots. However, similar results were not observed in oak seedlings. Observations of roots indicated that the rates of mycorrhizal infection of both tree species had dramatically declined at harvest time. In conclusion, ectomycorrhizal symbioses can improve the survival and performance of pine seedlings in mine tailings. The present study provided direct evidence of the importance of EMF inoculation of seedlings to the reforestation of mine wastelands.  相似文献   

16.
Feasibility of near-infrared (NIR) spectroscopy for developing multi-species model for plantation timber was explored for estimation of holocellulose in un-extracted milled wood samples. Six commonly planted species of Eucalyptus tereticornis, E. camaldulensis, E. grandis, Leucaena leucocephala, Dalbergia sissoo and Populus deltoides from a wide range of locations and varying age groups were taken for the present study. Few samples of E. hybrid between E. tereticornis and E. camaldulensis were also included in the study to make the model useful for practical application. NIR models were evaluated using partial least squares regression (PLSR-1—full cross-validation, PLSR-2—cross-validation which leaves more than one out) and by dividing the samples into calibration and prediction (test) sets and interchanging them from calibration to prediction sets. The predictive ability of the model was assessed by calculating four ratios of multivariate statistics for individual species model and combined species models. A final combined model for all the species having component range of 76.14–63.03 % and standard deviation of 2.586 % was developed in the spectral range of 7502–4246 cm?1 wave number using 1st derivative plus multiplicative scatter correction using factor of nine by removing samples with outliers found in all the PLSR-2 evaluation steps and in most of the models. The model remained stable even when 30 % of the samples were left out with no outlier detected.  相似文献   

17.
Cesium adsorption by commercial charcoals was examined to elucidate the mechanisms for capturing cesium ions in aqueous solution. Changes in the adsorption ability of charcoals due to water extraction (water washing) were investigated to develop practical cesium adsorptives based on charcoal. The commercial charcoals examined included mangrove charcoal (MC) and ubamegashi (Quercus phillyraeoides A. Gray) bincho charcoal (BC). Data from the two charcoals were compared with those of Japanese oak (Quercus serrata Thunb. and/or Quercus crispula Blume) charcoal (OC) reported previously. Aqueous cesium chloride solution (2.50 × 10?5 mol/L) was used as a sample solution for the adsorption study. Charcoal powder was used as an adsorbent after passing through a 60-mesh sieve. The powders were characterized using methods, such as Raman spectroscopy, X-ray fluorescence spectrometry, and infrared photoacoustic spectroscopy. The results indicated that MC, which was manufactured at the lowest possible temperature and had the smallest specific surface area, possessed the greatest ability to adsorb cesium. The MC also had the great cesium-adsorption ability in weak acidic solution and maintained the ability even after lengthy extraction treatments.  相似文献   

18.
Soil organic carbon (SOC) plays an important role in soil fertility and productivity. It occurs in soil in labile and non-labile forms that help in maintaining the soil health. An investigation was undertaken to evaluate the dynamics of total soil organic carbon (C tot), oxidisable organic carbon (C oc), very labile carbon (C frac 1), labile carbon (C frac 2), less labile carbon (C frac 3), non-labile carbon (C frac 4), microbial biomass carbon (C mic) and SOC sequestration in a 6-year-old fruit orchards. The mango, guava and litchi orchards caused an enrichment of C tot by 17.2, 12.6 and 11 %, respectively, over the control. The mango orchard registered highest significant increase of 20.7, 13.5 and 17.4 % in C frac 1, C frac 2 and C frac 4, respectively, over control. There is greater accumulation of all the C fractions in the surface soil (0–0.30 m). The maximum total active carbon pool was 36.2 Mg C ha?1 in mango orchard and resulted in 1.2 times higher than control. The passive pool of carbon constituted about 42.4 % of C tot and registered maximum in the mango orchard. The maximum C mic was 370 mg C kg?1 in guava orchard and constituted 4.2 % of C tot. The carbon management index registered 1.2 (mango orchard)- and 1.13 (guava and litchi orchard)-fold increase over control. The mango orchard registered highest carbon build rate of 1.53 Mg C ha?1 year?1 and resulted in 17.3 % carbon build-up over control. Among the carbon fractions, C frac 1 was highly correlated (r = 0.567**) with C mic.  相似文献   

19.
The influence of moisture content (MC) on the orthotropic viscoelasticity of Chinese fir wood (Cunninghamia lanceolata [Lamb.] Hook.) has been examined in low temperature environment. Storage modulus E′ and loss modulus E″ of wood with six different levels of MC ranging from 0.6 to 22.0% were determined from ??120 to 40 °C and at multi-frequency range of 0.5, 1, 2, 5, and 10 Hz using a TA instruments® Dynamic Mechanical Analyzer (DMA 2980). The results showed that a distinct moisture dependency is exhibited by the orthotropic viscoelastic behaviour of Chinese fir wood. With the exception of some apparent activation energy (ΔE) for β-relaxation process, the E′ decreased and the E″ peak temperatures moved towards lower temperature and the ΔE for α-relaxation process became lower with MC increasing in all orthotropic directions, whereby individual decline of E′ and the E″ peak temperatures were affected by MC to different degrees. Besides, a little E″ peak at around 0 °C was only seen in L direction, which could be attributed to the melting of frozen water. Furthermore, the dynamic viscoelastic behavior of wood is also dependent on the measurement frequency. The findings suggest that the orthotropic structure and moisture content have an important influence on the viscoelastic performance in low temperature environment.  相似文献   

20.
In this study, to summarize the changes of thermal-softening behaviors of wood and acetylated wood due to differences in the kinds of swelling liquids, the following measurements were conducted. Untreated and acetylated wood samples were swollen by various liquids and the temperature dependences of the dynamic viscoelastic properties were measured after the heating and cooling histories were unified among the samples. The results obtained are as follows. Untreated samples swollen by high-polarity liquid had lower peak temperature of tanδ, however acetylated samples had higher peak temperature of tanδ than those of untreated wood. On the other hand, untreated wood samples swollen by low-polarity liquid had higher peak temperature of tanδ, however acetylated samples had lower peak temperature of tanδ than those of untreated wood. The amount of swelling is determined by interaction between wood and liquid due to proton-accepting power and molar volumes of liquid and so on, therefore the peak temperature of tanδ and degree of reduction in dynamic elastic modulus (E´) with increasing temperature were corresponded to the amount of swelling.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号