首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Availability of solid by-products from wood harvesting and mechanical wood processing was estimated as sources for energy production based on recent actual harvesting, sawmill, and plywood production in Northwest Russia at 30 million m3. Nearly 70% of the energy wood, 20 million m3, was from harvesting, consisting of non-industrial round wood, unused branches and tops, defective wood resulting from logging, and spruce stumps removed after final felling. Over 30%, 10 million m3, of the available volume was from sawmills and plywood mills, i.e. wood chips, sawdust, and bark. Due to current low utilization of energy wood for bioenergy in Northwest Russia, delivery cost of energy wood to the potential border-crossing points in Finland was analyzed for three means of transport: railways, roadways, and waterways. Nearly 28 million m3 of the energy wood could be transported by railways and 2 million m3 by roadways and waterways. The costs were lowest by roadways from the nearby border areas (10–15 €/m3 for wood processing by-products and 16–22 €/m3 for forest chips). The costs by railways varied from 12 to 27 €/m3 on shorter distances to 47–58 €/m3 on longer distances. Waterway transportation was the most expensive, about 28–48 €/m3. It should be emphasized that we have estimated availability and delivery costs of energy wood, not prices which are defined by the market based on supply and demand.  相似文献   

2.
Abstract

Minimum procurement cost is an essential element for the competitiveness of the forest fuel supply chain. This paper compares one co-operative procurement strategy with several non-co-operative strategies by measuring the cost gap. For a study region consisting of five Austrian provinces, forest fuel supply potential and transportation costs were investigated concerning 28 newly built combined heat and power (CHP) plants. In the case of co-operation, the minimum total transportation cost was derived by solving the corresponding transportation problem. In non-co-operative supply chains, CHP plants compete for forest fuel. This case was illustrated by analysing three different clearly non-co-operative procurement strategies, because CHP plants guard their real supply sources as business secrets. The minimum procurement cost for all CHP plants is provided by the co-operative strategy. It comprises a total transportation cost of €17 million and an average procurement distance of 122 km. Co-operation between CHP plants lowers forest fuel transportation costs by 23% on average and reduces average transportation distances by 26%. The resultant cost-cutting potential stresses the importance of co-operation between CHP plants in order to allocate forest fuel supplies efficiently. Establishing partnerships and working alliances for forest fuel procurement therefore has important management implications for achieving efficiency in forest fuel supplies and strengthening the competitiveness of wood-fuel-based energy production.  相似文献   

3.

Timber use in central Europe is expected to increase in the future, in line with forest policy goals to strengthen local wood supply for CO2-neutral energy production, construction and other uses. Growing stocks in low-elevation forests in Switzerland are currently high as exemplified by the Swiss canton of Aargau, for which an average volume of 346 ± 16 m3 ha−1 was measured in the 3rd Swiss National forest inventory (NFI) in 2004–2006. While this may justify a reduction of growing stocks through increased timber harvesting, we asked whether such a strategy may conflict with the sustainability of timber production and conservation goals. We evaluated a range of operationally relevant forest management scenarios that varied with respect to rotation length, growing stock targets and the promotion of conifers in the regeneration. The scenarios aimed at increased production of softwood, energy wood, the retention of potential habitat trees (PHTs) and the conversion to a continuous cover management system. They were used to drive the inventory-based forest simulator MASSIMO for 100 years starting in 2007 using the NFI sampling plots in Aargau. We analyzed model outputs with respect to projected future growing stock, growth, timber and energy yield and harvesting costs. We found growing stock to drop to 192 m3 ha−1 in 2106 if business-as-usual (BAU as observed between the 2nd and 3rd NFI) timber volumes were set as harvesting targets for the whole simulation period. The promotion of conifers and a reduction of rotation lengths in a softwood scenario yielded 25% more timber over the whole simulation period than BAU. An energy wood scenario that reduced growing stock to 200 m3 ha−1 by 2056 and promoted the natural broadleaved regeneration yielded 9% more timber than BAU before 2056 and 30% less thereafter due to decreasing increments. The softwood scenario resulted in higher energy yield than the energy wood scenario despite the lower energy content of softwood. Retaining PHT resulted in a reduction of timber harvest (0.055 m3 ha−1 yr−1 per habitat tree) and higher harvesting costs. Continuous cover management yielded moderate timber amounts throughout the simulation period, yet sustainably. Considering climate change, we discuss the risks associated with favoring drought- and disturbance-susceptible conifers at low elevations and emphasize that continuous cover management must allow for the regeneration of drought-adapted tree species. In conclusion, our simulations show potential for short-term increases in timber mobilization but also that such increases need to be carefully balanced with future forest productivity and other forest ecosystem services.

  相似文献   

4.
Abstract

The time consumption and productivity of a single-grip harvester were studied, using a simulation model, when thinning from below and above in eight randomly selected stands. The model estimated the time required for each work element, given machine and tree positions, and tree size. A 2×5 factorial design was used with factors thinning type [from below (Tb) and above (Ta)] and tree size. Trees were subjectively selected for harvest according to thinning type. Total basal area removal was 30% plot?1. Approximately 50% more trees were harvested in Tb than in Ta Time consumption tree?1 was higher for Ta than Tb. Time consumption for machine and boom movements decreased with increasing number of harvested trees, and time for felling and processing of trees increased with harvested mean stem volume. Harvester productivity was 36% higher for Ta, since the increase in harvested mean stem volume was higher than the increase in time consumption tree?1.  相似文献   

5.
Cable yarding systems are widely used in mountainous forests of Austria. The goal of this paper is to determine optimal road spacing (ORS) of yarding operations by tower yarder in Styria to help logging planners minimize logging costs. A total of 591 working cycles were used to develop the multiple regression model using stepwise method to predict yarding time per cycle. The production and cost in whole tree uphill yarding were 6.70 m3/PSH and 27.60 Euro/m3, respectively. The roading, yarding and installation cost per cubic meter were computed for different yarding distances and graphed as a function of road spacing. The minimum total cost and ORS were 42.88 Euro/m3 and 261 m, respectively for one-way yarding. For two-way yarding, the minimum estimated total cost, ORS and optimal road density would be 38.48 Euro/m3, 373 m and 26.8 m/ha, respectively. The results showed increasing harvested volume decreases ORS and that increased roading cost increases ORS. The load volume has a significant effect on ORS.  相似文献   

6.
A procedure for calculation of stumpage value and logging costs of individual mature forest stands using aerial photo‐interpretation and a grid‐based geographical information system (GIS) is presented. The stumpage value may be computed from characteristics related to the trees, i.e. site index, stand mean height, crown closure, and tree species distribution, using price equations. By means of cost equations, the logging costs may be calculated from the tree characteristics and the terrain characteristics of slope gradient and skidding distance. The practical application of the procedure was demonstrated by a case study in a 710 ha forest area in southern Norway. The tree characteristics were determined by photo‐interpretation of individual stands. Skid paths for wood transportation from the stands to landings along the forest roads were delineated by photo‐interpretation of the ground conditions. Slope and skidding distances were derived by a digital elevation model and cartographic modelling. Finally, the photo‐interpreted tree characteristics and the computed slope and skidding distances were used for calculation of the stumpage value and the logging costs of each stand. According to previous tests, the accuracy of the procedure corresponded to the accuracy that could be achieved by the field‐survey methods used most frequently.  相似文献   

7.
The forest sector is important for the German Federal State of Baden-Württemberg (BW) and the Västerbotten (VB) County in Sweden. Their forestry wood chains (FWCs) are of similar magnitude and supply forest industries. This study provides a regional comparison of the performance of FWCs from roundwood harvesting, including hauling, to mill gate concerning the factors that impact sustainability and assess different sustainability indicators for alternative supply chains, in particular fully mechanized chains in comparison to motor-manual operations. The harvest volumes are similar but operational conditions differ. Analysis of sustainability indicators demonstrated that the total costs for roundwood to industry are similar. Higher harvesting costs in BW are compensated for by lower transport costs to the mills. Employment per unit is higher in BW because of the high share of labour in felling. Due to smaller machinery and shorter transport distances in BW, energy use and greenhouse gas emissions per unit are lower than in VB. Areas for improvement are the technologies for logging in BW and the logistics of timber transport in VB.  相似文献   

8.
Although crucial for assessing the functioning of alley cropping systems, quantitative information related to the hedgerow tree root distribution remains scarce. Soil mapping and destructive soil sampling was used to assess the impact of soil profile features on selected root characteristics of Senna siamea hedgerows, growing in alley cropping systems in three sites (Glidji, Amoutchou, and Sarakawa) representative for the derived savanna of Togo, West Africa. While the soil profiles in Glidji and Sarakawa contained a clay accumulation horizon, the Amoutchou profile was sandy up to 1 m. The number of small roots (diameter < 2 mm), quantified on a soil profile wall, decreased with depth in all sites. For most soil depths, the abundance of small roots tended to be higher near the tree base, e.g., ranging from 5.3 dm−2 in Amoutchou to 21.4 dm−2 in Glidji for the 0–20 cm layer, than in the middle of the alley, e.g., ranging from 3.1 dm−2 in Amoutchou to 13.8 dm−2 in Glidji for the 0–20 cm layer. Root length density (RLD) of the 0–10 cm and 10–20 cm layers was significantly higher in Glidji than in Amoutchou (P < 0.05) and in Sarakawa (P = 0.08). Differences in RLD between sites were not significant for layers below 30 cm. For each layer, root weight densities (RWD) were similar in all sites, e.g., ranging from 0.44 mg cm−3 in Amoutchou to 0.64 mg cm−3 in Glidji in the 0–10 cm layer, indicating that the roots in the Glidji topsoil had a smaller overall diameter than in Amoutchou. In Amoutchou, the relative RLD was lower than in Glidji or Sarakawa for the top 40 cm of soil, while the inverse was observed for the layers between 50 and 100 cm deep and this was related to the sandy soil profile in Amoutchou. Another consequence of the sandy profile was the larger tap root diameter below 50 cm in Amoutchou compared to Sarakawa. For all sites, significant (P < 0.001) linear regressions were observedbetween RLD's, RWD's, and the abundance of small roots, although the variation explained by the regression equations was highest for the relationship between RLD and RWD. The potential of the hedgerows to recover nutrients leached beyond the reach of food crops or the safety-net efficiency was evaluated for the tree sites. This revised version was published online in June 2006 with corrections to the Cover Date.  相似文献   

9.
The study optimised the management of a Grevillea robusta (A. Cunn.) stand growing in the central highlands of Kenya. The optimisations were conducted separately for even-aged and uneven-aged management system of trees. The management was also optimised with the requirement that maize production under the tree cover must be profitable every year. Technically, the optimisation problems were solved by linking a simulation program with the non-linear optimisation algorithm of Hooke and Jeeves. The simulation program calculated the tree growth, volumes of harvested trees, and maize yields with a given set of management parameters (decision variables). The maize yield predictions and simulated timber yields were converted into gross incomes of which the production costs were subtracted. In even-aged management the objective variable was the soil expectation value with 5% discounting rate. In uneven-aged management the mean annual net income was maximised. The optimal solutions indicated that with both management systems it is optimal to concentrate on wood production. The optimal stand densities were so high that profitable maize production was not possible under the tree cover. The mean annual wood production of the optimal management schedule was more than 50m3 ha–1. Forcing profitable maize production in the solution decreased the wood production by 57% (even-aged forestry) or 27% (uneven-aged forestry) and net income by 45% (even-aged forestry) or 24% (uneven-aged forestry).This revised version was published online in November 2005 with corrections to the Cover Date.  相似文献   

10.
Restoring longleaf pine (Pinus palustris Mill.) over much of its original range requires artificial regeneration. In central Louisiana, USA, two fertilization levels—No (NF) or Yes (F-36 kg/ha N and 40 kg/ha P) in combination with three vegetation treatments—Check, four prescribed fires (PF), or multi-year vegetation control by herbicidal and mechanical means (IVM) were applied to container-grown longleaf pine plantings in a grass savanna. After 10 years, P concentration in longleaf pine foliage was less on NF plots than F plots, but fertilization did not significantly affect tree stature. Survival was greater on NF plots than F plots, and so, NF plots were more productive (NF—63 m3/ha and F—45 m3/ha). Pine trees on IVM plots (37 dm3/tree) were significantly larger than on Check and PF plots, which averaged 17 dm3/tree. Survival was better on IVM plots (88%) than PF plots (78%), which was better than Checks (58%). Consequently, IVM plots were most productive (99 m3/ha), followed by PF plots (44 m3/ha), and lastly Checks (28 m3/ha). PF plots had greater grass cover (38%) than Check and IVM plots, which averaged 5%, whereas PF and IVM plots had less understory arborescent cover (an average of 25%) than Checks (91%). A wildfire in March 2007 reduced pine survival by 22, 14, and 1 percentage points on IVM, Check, and PF plots, respectively. Seven months later, longleaf pine production had decreased to 92 m3/ha on IVM plots while increasing to 55 m3/ha on PF plots and 30 m3/ha on Checks. Overall, the wildfire rejuvenated the herbaceous plant community. Grass cover on Check and IVM plots averaged 20% while grass cover on PF plots was 36%. Forb cover increased on all treatments from 2% before the wildfire to 13% seven months after the wildfire. Understory arborescent cover decreased on Checks to 62% but increased slightly on PF and IVM plots and averaged 30%.  相似文献   

11.
The effect of tree harvesting on soil mineral nitrogen and microbiological activity were investigated in an agrisilvicultural system consisting of wheat cultivated along the sides of a poplar plantation in Sweden from 1993 to 1995. Sampling for mineral nitrogen was carried out in three layers down to 90 cm at two distances, near (0.5–1.5 m) and far (4.0–5.0 m) from rows of standing, ST, and harvested trees, HT. Sampling for basic respiration and substrate-induced respiration was carried out in the 0–10 cm layer in 1993 and in the 0–10 cm and 10–20 cm layers in 1994 at the same distances from trees.There was a higher concentration of ammonium and lower concentration of nitrate closer to trees, indicating an efficient uptake of nitrate by trees and enhanced N mineralization close to trees. Shortly after tree harvesting, there were higher concentrations of nitrate and ammonium in the 0–30 cm soil layer near the harvested trees than near standing trees, suggesting a derease in nitrogen uptake by tree roots. The soil microbiological activity was lower in the harvested than the standing plots of trees, which is considered as an indication of the important role of root exudates in maintaining a larger microbial biomass close to trees.  相似文献   

12.
  • ? In the tropical intertidal zones, little is known on water uptake by mangroves. Transpiration rates are generally measured at leaf level, but few studies exist on water use at tree or stand levels.
  • ? The objective of this study was to measure sap flow in trees of different sizes to appreciate the range of variation in water use that may exist in a site dominated by 80% mature Avicennia germinans.
  • ? The results showed that from the dry to the wet season the mean water use increased from 3.2 to 5.3 dm3 d?1 in small trees (DBH ～ 13 cm), from 11.5 to 30.8 dm3 d?1 in medium trees (～24 cm) and from 40.8 to 64.1 dm3 d?1 in large ones (～45 cm).
  • ? Sapwood remained active up to a depth of 8 cm with radial variations within the stem. Weak correlations were obtained with VPD and net radiation.
  • ? This study confirmed that transpiration was larger under low levels of salinity. Water use at stand level (～1900 living stems ha?1) was estimated to be in the range of 5.8 to 11.8 m3 ha?1 d?1 according to the season.
    •   相似文献   

    13.
    Results from long-term fertilizer experiments on Scots pine (Pinus sylvestris) planted on old arable land in the north-eastern German lowlands demonstrate the necessity for fertilization with KMg on poorly buffered sandy soils.Applying KMg to young Scots pine increased pole production over a 60 year period by a total of 129 m3 ha−1 (26%). In other experiments the improvement was as much as 93%.KMg manuring on light soils ensures optimal K and Mg nutrition and creates the conditions for uninterrupted growth and healthy development of the plantation. On degraded soils, KMg treatment leads to improved utilisation of the low soil nitrogen supply.With increasing eutrophication due to atmospheric nitrogen, KMg fertilization overcomes the depletion of soil cations and resulting imbalance in tree metabolism.Adequate application of KMg is a prerequisite for success in underplanting with beech (Fagus silvatica) on soils with a land use classification below 30, increasing the growth in height of beech by about 30%.KMg fertilizer favours biomass production and thus the fixation of N deposited through the atmosphere by the vegetation. Thereby, KMg fertilizer use and other silvicultural measures reduce the negative effects of atmospheric N-input in forest ecosystems to a certain extent, especially the N-pollution of groundwater. However, they cannot replace the technologies to reduce the N emissions.  相似文献   

    14.
    Unproductive saline and waterlogged (WT) wastelands could be beneficially transformed into agroforestry systems using trees tolerant to these stresses. We studied the salinity and waterlogging tolerance of five Australian tree species (Acacia salicina, Casuarina glauca, Casuarina obesa, Eucalyptus camaldulensis and Eucalyptus occidentalis) during seedling stage and their relationships with root and leaf ion concentrations. 8-month old plants were exposed for 5 months to five irrigation water salinity treatments (EC values between 2 and 22 dS m?1) and two waterlogging treatments (drained or WT). The salinity tolerance of the five species was high, although decreased in WT conditions. Irrespective of salinity, the two Casuarina species were more tolerant and the other three species were less tolerant to WT than drained conditions. In all species, salinity and waterlogging increased leaf Cl? and Na+ and decreased leaf Ca2+, but not leaf K+. Root Cl? and Na+ increased with salinity but not with waterlogging. Salinity tolerance was negatively correlated with Cl? and Na+ leaf accumulation rates per unit increase in salinity. Waterlogging reduced the ability of the seedlings to exclude Cl? and Na+ from the leaves. The two most salt tolerant Casuarina species under both drained and WT conditions showed the highest leaf Cl? and Na+ exclusion and the highest root Cl? and Na+ accumulation, suggesting that sequestration of these toxic ions in their roots was a significant salt-tolerant mechanism. Revegetation of saline and WT wastelands with these tolerant Casuarina species could be profitably used for biomass, biofuel and renewable energy production.  相似文献   

    15.
    《Southern Forests》2013,75(4):195-200
    At least 200 000 m3 of timber is harvested annually using semi-mechanised harvesting systems on the Viphya forest plantations in Malawi. Although these systems have long been used on the Viphya, no investigation on their productivity has so far been reported. Additionally, the absence of localised productivity analyses in Malawi has created a paucity of information on appropriate timber harvesting systems for production maximisation and cost minimisation. The objective of this study was to compare the production rates and operational costs of chainsaw/grapple skidder (semi-mechanised) and feller-buncher/grapple skidder (mechanised) harvesting systems in order to determine the economic feasibility of mechanised systems in the Viphya forest plantations. The study was conducted in Pinus kesiya compartments at the Kalungulu and Champhoyo forest stations of the Viphya forest plantations. A work study approach was followed to capture harvesting time and volume data for the semi-mechanised system. Secondary work study data were used to simulate productivity of the mechanised system on similar compartment conditions. A timber-harvesting costing model was used to analyse the results. The study showed that the simulated mechanised system was associated with lower operating costs and inventories with higher production rates than the semi-mechanised system. The cost marginal difference was US$0.89 m–3. It was therefore established that migration to mechanised systems could optimise timber harvesting productivity on the Viphya in future, if optimal volumes are available to ensure the efficient application of the mechanised harvesting system.  相似文献   

    16.
    The economic viability and potential of a novel poultry agroforestry system   总被引：1，自引：0，他引：1  
    Investigating agroforestry systems that incorporate poultry is warranted in Northern Europe as they may offer benefits including: improved welfare and use of range; reduced feed costs; price premia on products; reduced payback periods for forests; and, greater returns on investment. Free-range egg production accounts for 27% of the United Kingdom egg market and demand for outdoor broilers is increasing. No research has been conducted recently on the economic viability of agroforestry systems with poultry. An economic model was constructed to: assess economic viability of a broiler agroforestry system; and, investigate the sensitivity of economic performance to key factors and interactions, and identify those which warrant attention in research and management. The system modelled is a commercial trial established in Southern England in 2002 where deciduous trees were planted and broilers reared in six- or nine-week periods. The model uses Monte Carlo simulation and financial performance analyses run for a 120-year period. An Internal Rate of Return (IRR) of 15.5% is predicted for the six-week system which remains viable under a ‘worst case’ scenario (IRR of 12.6%). Factors which affect financial performance most (decreasing in magnitude) are prices achieved for broilers, costs of brooding houses, chicks, arks, feed and timber prices. The main anticipated effects of biological interactions on financial performance (increased ranging on feed conversion and excess nutrient supply on tree health) were not supported by analysis. Further research is particularly warranted on the welfare benefits offered by the tree component and its relation to price premia.  相似文献   

    17.
    Successful regeneration of coastal montane sites harvested using alternative silvicultural systems may depend on the degree to which tree species can acclimate morphologically and physiologically to a variety of light environments. In a study to determine shade acclimation in montane conifers, one-year-old amabilis fir (Abies amabilis (Dougl.) Forbes) and western hemlock (Tsuga heterophylla (Raf.) Sarg.) seedlings were grown in a nursery under four shade treatments: full sunlight (0% shade), 60% and 30% shade using shade cloth, and 30% shade using lath slats. Shading influenced shoot development, foliar physiology and morphological characteristics of both amabilis fir and western hemlock but in general, the effects were small. Shade levels of 60% were required to induce significant acclimation, and western hemlock appeared to respond more positively than amabilis fir and therefore was considered more shade tolerant than amabilis fir. Light quality had little influence on growth and development, as indicated by a lack of significant differences in physiology or morphology between seedlings grown under shade cloth or lath slats. There were indications that adequate nutrition levels may mitigate the effects of shade on seedling morphology and physiology.  相似文献   

    18.
    There is increasing interest worldwide in using tree harvesting biomass as an energy source. Bark retained on logs is commonly used as an energy source, but is generally removed from eucalypt logs during harvest. In order to evaluate the potential use of eucalypt bark as fuel, there is a need for information on the productivity and cost implications of retaining eucalypt bark during harvest operations. The study examined the impact of retaining bark on logs on the productivity and costs of a whole?tree to roadside harvesting system in a short?rotation Eucalyptus nitens plantation in Australia being harvested for pulp logs. Trees were felled and bunched with a feller?buncher in spring, then left infield for four weeks to promote bark adhesion and reduce bark loss. A skidder extracted the trees to roadside where a processor processed them to predominantly 10?m logs. Machine productivities were calculated from estimated tree and log volumes and cycle times recorded from video recordings. The feller?buncher's productivity (65 m3 PMH0?1) was less than expected as it appeared to be underpowered to handle the larger trees on the study site. The skidder's productivity (56 m3 PMH0?1) was comparable to those reported in studies under similar conditions and with bark retained. The roadside processor's productivity (25 m3 PMH0?1) was lower than expected. This was believed to result from the operator separately stacking 10?m and 5?m logs, and the lower feed speed resulting from slippage due to the reduced feed roller pressure used in the study to reduce bark loss. Future research could identify feed rollers that increase feed speed while retaining bark. Harvest system costs (AUD18 GMt?1) were similar to those reported for a eucalypt roadside processing trial where bark was removed. These results suggest that retaining bark on the logs at roadside did not affect the harvesting system's productivity or costs.  相似文献   

    19.
    On two silt loam flatwoods in Louisiana, use of mounds as planting sites for slash pine (Pinus elliottii Engelm. var. elliottii) was shown to be more effective than planting without mounds (untreated control) after six growing seasons in the field. Mounds formed were of two sizes: low mounds made of 550 dm3 of soil and high mounds made of 1,000 dm3 of soil. One site was in central Louisiana and had two drainage classes: a somewhat poorly drained Caddo-Messer complex and a poorly drained Caddo soil. On both drainage classes, pine survival was not affected by treatment, but the incidence of fusiform rust galls on the main stem (caused by Cronartium quercuum (Berk.) Miyabe ex Shirai f. sp. fusiforme Burdsall and Snow) was greater on trees planted on mounds. The second site was a poorly drained Caddo soil in southwestern Louisiana. At this site, there were fewer surviving pines on controls than on mounds, but the incidence of rust galls was not affected by treatment. At both sites, pines were taller and had a greater mean diameter at breast height on mounds than on controls. Mound size did not influence tree size at either site.  相似文献   

    20.
    Root pathogens are one of the principle factors affecting forest productivity in many forests, but few estimates of impact are available. Non-lethal root infections associated with Armillaria root disease were studied to determine their effect on stem volume yield in seven planted Douglas-fir stands and a naturally regenerated stand in British Columbia's southern interior. Trees were removed from the soil and the infection date of a random selection of trees was determined. The volume reduction attributable to disease was determined as a comparison of diseased to disease-free trees over time since infection. Volume reductions per tree ranged from 0 to 30 dm3 (0-27%) depending on the tree age and disease duration. Yield reduction reached 27 m3/ha, averaging 15 m3/ha for the three oldest planted sites by age 30 (7-15%), but was lower at the naturally regenerated site. Yield reduction at the site level correlated best with the number of diseased trees and an unknown site factor. Sites with slow juvenile growth had the least yield reduction owing to their lower incidence of disease over time. Yield was less affected by the proportion of diseased primary roots per tree than by the cumulative time since infection. A few of the diseased trees maintained growth rate after infection similar to disease-free trees; interestingly, these trees were smaller than average to begin with. Overall, trees suffer accumulating growth reduction without recovery. Root diseases prevent full expression of site potential even without mortality. Minimizing disease impact in respect to other forest management goals is also discussed.  相似文献   

    设为首页 | 免责声明 | 关于勤云 | 加入收藏

    Copyright©北京勤云科技发展有限公司  京ICP备09084417号