首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Differences of raw cork quality, in terms of thickness and porosity, were observed in productive cork oak (Quercus suber L.) stands in the Nebrodi and Iblei mountains of Sicily in relation to stand density. Five study areas were chosen across a range of different stand density satisfying specific sampling requirements among two managed cork oak woods.Analysis of variance using Fisher–Snedecor‘s F test (p < 0.05) were used to identify statistically significant differences of cork quality and sylvicultural, dendrometric and cork stripping parameters between study areas within each stand. Relationships between cork quality and sylvicultural and dendrometric parameters were also tested using Pearson's correlation coefficient (r). Results shown that sylvicultural practices are a key factor influencing cork quality: statistically significant differences in cork thickness and crown area were observed between areas at different stand density; positive correlations were found between cork thickness and crown area in lower density study areas favouring a significant vegetative activity; negative correlations were found between parameters of cork stripping (cork stripping coefficient, cork stripping surface, maximum height of cork stripping) and cork thickness. No correlations were found between cork porosity and dendrometric or sylvicultural parameters, demonstrating the probable genetic origin of cork porosity. Results shown that cork quality parameters and stand attributes may be used in sustainable management models of cork oak forests.  相似文献   

2.
Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm2, the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm2. In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.  相似文献   

3.
Fourier transform infrared (FTIR) spectroscopy was applied to determine the type of surface treatment and dose used on cork stoppers and to predict the friction between stopper and bottleneck. Agglomerated cork stoppers were finished with two different doses and using two surface treatments: P (paraffin and silicone), 15 and 25?mg/stopper, and S (only silicone), 10 and 15?mg/stopper. FTIR spectra were recorded at five points for each stopper by attenuated total reflectance (ATR). Absorbances at 1,010, 2,916, and 2,963?cm?1 were obtained in each spectrum. Discriminant analysis techniques allowed the treatment, and dose applied to each stopper to be identified from the absorbance values. 91.2% success rates were obtained from individual values and 96.0% from the mean values of each stopper. Spectrometric data also allowed treatment homogeneity to be determined on the stopper surface, and a multiple regression model was used to predict the friction index (If?=?Fe/Fc) (R 2?=?0.93).  相似文献   

4.
The aim of this study was to evaluate the potential of visible and near infrared spectroscopy (Vis/NIRS) in predicting the chemical, physical and mechanical behavior of single-piece natural corks stoppers used for sealing wine bottles. Two training sets of 90 and 150 cork stoppers were used to obtain four spectra per sample in different positions: two of the stopper bases (transversal section) and two of the stopper sides (tangential section and radial section). The samples were scanned in the range of 400–2,500 nm using a Foss-NIRSystems 6500 SY II spectrophotometer equipped with a remote reflectance fiber-optic probe. On each training set, two-thirds of the samples were used to develop modified partial least square (MPLS) calibration equations, and the remaining one-third of the sample for the external validation of these MPLS equations. The best equations were obtained for the transversal section, which is the recommended one when applying Vis/NIRS technology to cork. The best results for the chemical composition were obtained for waxes and total polyphenols, showing coefficient of determination of the cross validation (r cv 2 ) values of 0.64 and 0.56 and coefficient of determination of the external validation (r EV 2 ) values of 0.53 and 0.55, respectively. The best equation for the physical and mechanical parameters was obtained for moisture content (r cv 2  = 0.86 and r EV 2  = 0.85), with somewhat lower results for density, compression force and extraction force (r cv 2  = 0.66, 0.72, 0.52 and r EV 2  = 0.52, 0.49, 0.51, respectively). The SECV (standard error of cross validation) and SEP (standard error of external validation) were similar for all the physical and mechanical parameters, thus confirming the robustness of the equations. MPLS model for moisture content fulfills the requirements for screening (RPD >2.5), but MPLS models obtained for waxes, total polyphenols, density, compression force and extraction force are not good enough for routine analysis or quality control. The results obtained from the MPLS models based on Vis/NIRS technology would permit the continuous quality control of humidity in the production line as well as obtaining information about certain chemical components (extractives contents) and some physical and mechanical parameters (density, extraction force and compression force).  相似文献   

5.
 Cuttings from older trees of the Dipterocarpaceae generally lose their ability to root. However, branches in a canopy of adult dipterocarps are a possible source of cuttings because they show juvenile characteristics in architecture due to “adaptive reiteration”, suggesting physiological rejuvenation. Effects of resource plant size on the rooting of cuttings and the possibility of using cuttings from reiterated branches of adult trees were studied for Dryobalanops lanceolata, an emergent dipterocarp species. A cutting experiment with non-mist propagators was conducted for cuttings collected from resource plants of four different size classes: <2 m, 2–5 m, 8–15 m, and 70 m in height. The smallest size class included two different age classes: <2 and >2 years old. Cuttings from the tallest resource plant were collected from reiterated branches. Rooting percentage was negatively correlated with resource plant size: 77–78% for resource plants <2 m, 63% for 2–5 m, 36% for 8–15 m, and 0% for 70 m. Rooting percentages of cuttings collected from different individuals were not different for the 2–5 m tall class, while they were significantly different for the 8–15 m tall class. Resource plant size was negatively correlated with the number of roots for rooted cuttings. No significant relationship was observed between resource plant size and mean length of each root, total root length or total root dry weight for rooted cuttings. The results suggest the possibility of collecting cuttings from relatively large resource plants up to 15 m tall and >20 years old if we chose good individuals for resource plants. The results, however, show the difficulty in using reiterated branches of adult trees as a source of cuttings for D. lanceolata. Received: October 15, 2001 / Accepted: November 11, 2002 Acknowledgments We express our sincere thanks to Dr. S. Tamura, Dr. K. Ogino, and Mr. A.A. Hamid for their kind support. The tree tower was constructed in a cooperative project between Japan and Sarawak supported by the Ministry of Education, Culture, Sports, Science and Technology, Japan (Grant NP0201). The cutting experiment was partly funded by the Nippon Life Insurance Foundation and the Japan Society for the Promotion of Science (JSPS-RFTF96R16001). Correspondence to:A. Itoh  相似文献   

6.
以百林软木制品有限公司提供的阿尔及利亚栓皮槠(Quercus suber)软木及天然红酒塞为原料,对其细胞结构和化学成分进行研究,为红酒塞中的2, 4, 6-三氯苯甲醚(TCA)去除提供一定的指导作用。使用场发射扫描电镜观察软木的微观形态;分析栓皮槠软木的化学成分。结果表明:栓皮槠软木细胞是排列紧密的薄壁细胞,无细胞间隙。横切面和径切面成行排列,类似砖墙状;弦切面上呈现蜂窝状;软木细胞部分细胞壁上有明显褶皱,可能对TCA的去除有一定的影响。软木的各种化学成分含量为:灰分0.52%,抽提物总量13.28%,木栓脂43.41%,酸不溶木质素22.98%,纤维素3.40%,半纤维素16.41%。  相似文献   

7.
Cork harvesting and stopper production represent a major forest industry in Sardinia (Italy). The target of the present investigation was to evaluate the classification tree as a tool to discover possible relationships between microsite characteristics and cork quality. Seven main cork oak (Quercus suber) producing areas have been identified in Sardinia, for a total of more than 122,000 ha. Sixty-three sample trees, distributed among different geographical locations and microsite conditions, were selected. A soil profile near each sample tree was described, soil samples were collected and analysed. After debarking, cork quality of each sample tree was graded by an independent panel of experts. Microsites where trees had more than 50% of the extracted cork graded in the best quality class, according to the official quality standard in Italy, were labelled as prime microsites, the others as nonprime microsites. Relationships between a binary dummy variable (0 for nonprime microsites, 1 for prime microsites) and site factors were investigated using classification tree analysis to select the relevant variables and to define the classification scheme. Prime quality microsites for cork production proved to be characterised by elevation, soil phosphorus content and sandiness. Results have been compared with those of the more conventional parametric approach by logistic regression. The work demonstrates the advantages of the classification tree method. The model may be appropriate for classifications at landscape and stand mapping levels, where it is possible to sample a number of microsites and to evaluate distributional characteristics of model output, while its precision is only indicative when estimating the prime quality of single microsites.  相似文献   

8.
 We evaluated the protective effects of floor cover against soil erosion in three types of forest located on steep slopes under a humid climate: 22- and 34-year-old Chamaecyparis obtusa (hinoki), 34-year-old Cryptomeria japonica (sugi), and 62-year-old Pinus densiflora (red pine) stands. We measured sediment transport rates (sediment mass passing through one meter of contour width per millimeter of rainfall), using sediment traps, before and after removing floor cover. Raindrop splash erosion was dominant in the experimental stands. Floor cover percentage (FCP) during the preremoval stage varied from 50% to 100% among the four stands, and sediment transport rates ranged from 0.0079 to 1.7 g m−1 mm−1. The rates increased to 1.5–5.6 g m−1 mm−1 immediately after removing floor cover, and remained high throughout the experiment. The presence of physical cover near the ground has a crucial effect on sediment transport on forested slopes. The protective effect ratio (the ratio of the sediment transport rate in a control plot to that in the removal plot) in a young hinoki stand, in which the FCP decreased markedly, was 0.3 at most, which is close to the rate for bare ground. The protective effect ratio in the red pine stand was ≤0.003. We concluded that the protective effect of floor cover in undisturbed forests in Japan differs by over two orders of magnitude, based on comparisons with previous studies. Received: March 11, 2002 / Accepted: August 16, 2002 Present address: Department of Forest Site Environment, Forestry and Forest Products Research Institute, Ibaraki 305-8687 Japan Tel. +81-298-73-3211; Fax +81-298-74-3720 e-mail: miura@affrc.go.jp Present address: Department of Forest Site Environment, Forestry and Forest Products Research Institute, Ibaraki 305-8687 Japan Tel. +81-298-73-3211; Fax +81-298-74-3720 e-mail: miura@affrc.go.jp Acknowledgments This study was supported by the Research Council of the Ministry of Agriculture, Forestry, and Fisheries, of Japan. We thank H. Ujihara, S. Ujihara, and M. Ogasawara in Otoyo, Kochi, who provided the experimental stands used in this study. We also thank K. Hirai, S. Kuramoto, E. Kodani, and the rest of the staff at the Shikoku Research Center, Forestry and Forest Products Research Institute, for their help in conducting the experiments. Correspondence to:S. Miura  相似文献   

9.
Early and significant influences on soil physical properties are expected in temperate agroforests as a consequence of various soil and/or understory management practises. Soil physical characteristics were studied in an agroforestry trial of common walnut (Juglans regia L.) set up on a volcanic soil in central Italy, where clean cultivation, polyethylene mulching along tree rows and intercropping of walnut with alfalfa (Medicago sativa L.) were tested. Soil total porosity, size distribution and morphology of pores, and available water were evaluated during the second and the fourth growing season of the plantation to determine the possible influence and duration of the treatments on soil physical properties. In the first sampling the total porosity was two to three times greater than in the second one and no significant differences were found between treatments. Seasonal variation in total porosity was observed, with a maximum in summer. All dimensional classes of pores > 50 μm were well represented, thus indicating an adequate soil structure. In the fourth growing season total porosity and pore size distribution were very similar in clean cultivation and mulching so that the mulching effect on the structural characteristics of this soil was equivalent to that of repeated rototilling in clean-cultivated plots. Moreover, mulching stimulated more biological activity, resulting in a higher proportion of rounded pores. Alfalfa roots created a more homogeneous environment to a depth of 35 cm, with a greater presence of elongated pores in the range 50--500 μm that could make movement of water easier. Most of the water retained was unavailable for plants, so that competition between walnuts and alfalfa took place and could be associated with the lower stem growth of intercropped walnuts. This revised version was published online in June 2006 with corrections to the Cover Date.  相似文献   

10.
We studied the biomass and its allocation in natural secondary forests, as well as the amounts, accumulation and distribution of nutrient elements (N, P, K, Ca and Mg) in sample plots established in the Loess Plateau in Shanxi Province, northern China. The results show that biomass in natural secondary forests amounted to 36.09 t/hm2, of which the tree layer accounted for 46%, the shrub layer for 29%, the herb layer for 13% and the litter layer for 12%. The total storage of the five nutrient elements is 1089.82 kg/hm2. Nutrient storage in the tree layer is the largest, at 41%. The sequence of storage of the elements varied among different layers and is given as follows: shrub layer 31.27%, herb layer 12.55% and litter layer 15.36%. The accumulation of nutrient elements in the tree layer, ordered from high to low, is: branches > roots > stems >bark > leaves. The total storage of the five nutrient elements in the soil is 634.97 t/hm2, where the accumulation of the nutrients accounts for 95.32% (N), 99.64% (P), 99.91% (K), 99.84% (Ca) and 99.95% (Mg) of the total amounts. The accumulation coefficients of different organs in the tree layer are, from high to low: leaves > branches > roots > bark > stems. The accumulation coefficients in the different layers are listed as follows: shrub layer > tree layer > herb layer and for the elements as: N > P > Ca > K > Mg. __________ Translated from Journal of Beijing Forestry University, 2008, 30(3): 57–62 [译自: 北京林业大学学报]  相似文献   

11.
Cork oak landscape dynamics were assessed over a 47-year period (1958–2005) in an endangered region of southwest Portugal using a GIS approach. The area of cork oak woodlands was maintained during this period, but shifts due to land abandonment were evident leading to transformation of cork oak agriculture areas into woodlands and of cork oak woodlands into shrublands (average yearly change rates of 0.6 and 0.1%, respectively). The multi-temporal landscape analyses showed that expansion and regression rates of cork oak forests were similar (15 and 16 ha year−1, respectively). The main factor determining oak woodlands expansion and regression was related to land-use changes, but slope, aspect and soil type were also significant factors. The substitution of agriculture lands and oak woodlands by shrublands has a determining role in periods of disturbance and recovery of these Mediterranean ecosystems.  相似文献   

12.
Rehabilitated forests established about 100 years ago on denuded lands in a hilly granitic area are widespread in the Kyoto–Osaka area, the second largest megalopolis in Japan. From 2001 to 2003, we monitored the annual nitrogen (N) budget of a rehabilitated forest watershed dominated by Quercus serrata and Ilex pedunculosa. The ion concentrations of bulk rain in the watershed were similar to those of other watersheds in Japan. The annual bulk rain input of N ranged from 5.1 to 6.3 kg N ha−1 year−1, and the N deposition from throughfall and stem-flow ranged from 7.5 to 8.2 kg N ha−1 year−1. Estimated annual outputs of N from the stream ranged from 3.3 to 10.6 kg N ha−1 year−1. These results indicate that the amount of N deposition in this area is less than that in urban Tokyo (>10 kg N ha−1 year−1), but the N output of the watershed is comparable with that of the Tokyo area. We discuss the characteristics of N dynamics in rehabilitated forests, focusing on the biogeochemical processes of this watershed.  相似文献   

13.
Summary Assessments of internal checking and the physical properties of 124 trees of Eucalyptus regnans F. Muell. have shown that for material dried under relatively mild predryer conditions (30 °C, 65% RH) internal checking was highly positively correlated with each of collapse, moisture content and normal shrinkage, and weakly negatively correlated with total external shrinkage. Collapse alone explained 47% of the variation in internal checking. Incidence of internal checking in sample boards could be estimated with moderate success by each of the following properties measured on board ends: collapse, the number of internal checks and initial moisture content. Material with high mean basic density above 530 kg/m3 was associated with low levels of internal checking and collapse. However, the maximum naturally occurring density of E. regnans was not high enough to obviate collapse and internal checking. It was observed that growth rings in 100 × 50 mm backsawn boards in which the earlywood air-dry density was below 450 kg/m3 showed internal checking. The size and number of internal checks increased with a decrease in earlywood density. It was shown that drying E. regnans below temperatures of 24–30 °C does not eliminate collapse, thus raising doubt about the validity of a temperature threshold concept in that range. Received 17 September 1997  相似文献   

14.
We analyzed the growth patterns of Thujopsis dolabrata var. hondai trees in an old plantation (161 years old), where no silvicultural treatments (e.g., thinning) have been conducted since the initial planting. The analysis focused on understanding individual growth under a long-term self-thinning process, and the stand-level stemwood production at the mature stage was evaluated. Nine canopy-layer trees and one suppressed tree were used for the analysis of annual increments in stem diameters, heights, and stemwood volumes for a given past year using the ring-width data. Both the diameter (at basal portion) and height of all the canopy-layer trees increased at similar rates during the early stage (i.e., 60–70 years after planting); however, after this period, only the height growth rates declined sharply. The annual growth rates of stemwood volume also simultaneously leveled off at the stand age of 40–60 years. Subsequently, the patterns diverged conspicuously, e.g., the growth rates were maintained or increased in some individuals, while it gradually decreased in the case of others until the present year. The divergence of growth pattern was likely to be triggered by intertree competition at several decades after the onset of canopy closure. The current stemwood production of the sample trees, including the suppressed one, was positively correlated with certain size parameters such as stem diameter at breast height and sapwood area at a height of 4 m. Based on the diameter-base allometry, the total stand stemwood production was estimated to be about 12.8 m3 ha−1 year−1. This estimate was higher than those of some old natural T. dolabrata forests (2.0–8.6 m3 ha−1 year−1) that have been well managed by repetitive selection thinning. Furthermore, individual mean stemwood production of the study plantation (0.03 m3 tree−1 year−1) was within the range of these natural stands (0.01–0.05 m3 tree−1 year−1). These comparisons suggested that the old T. dolabrata plantation still maintained a relatively high stemwood production potential despite the absence of artificial controls of tree density in the past. In terms of timber production, this fact implied that a rather long rotation (>100 years) can be applicable in the management of T. dolabrata plantations.  相似文献   

15.
The assessment of cork quality and the estimation of cork value are very important to forest landowners, for management purposes and for cork commercialisation. The Forest Producers Associations have been using a sampling scheme with the objective of estimating cork value (price per unit of weight, usually kg) before extraction, based on the sampling of individual trees along a zigzag transect that covers the entire stand. The sampling error is usually too high, but, from a practical standpoint, it is difficult to increase the sampling intensity if it would imply an increase in sampling costs. The aim of this work was to propose, from data collected in six stands representative of the cork oak stands in Portugal, an alternative sampling methodology with a more efficient precision/cost ratio. Precision and costs of alternative sampling designs based on clusters of different sizes, complemented with analysis of the intracluster correlation coefficient, were studied in order to propose the most adequate sampling strategy. Single-stage cluster sampling with clusters of 5–7 trees guarantees a reasonable sampling error (10–15%) and can be conducted without a large increase in cost.  相似文献   

16.
Agroforestry and grass buffers have been proposed for improving water quality in watersheds. Soil porosity can be significantly influenced by buffer vegetation which affects water transport and water quality. The objective of the study was to compare differences in computed tomography (CT)-measured macroporosity (>1,000-μm diam.) and coarse mesoporosity (200- to 1,000-μm diam.) parameters for agroforestry and grass buffer systems associated with rotationally grazed and continuously grazed pasture systems. Soils at the site were Menfro silt loam (fine-silty, mixed, superactive, mesic Typic Hapludalf). Six replicate intact soil cores, 76.2 mm diam. by 76.2 mm long, were collected using a core sampler from the four treatments at five soil depths (0–50 cm at 10-cm intervals). Images were acquired using a hospital CT scanner and subsequently soil bulk density and saturated hydraulic conductivity (K sat) were measured after scanning the cores. Image-J software was used to analyze five equally spaced images from each core. Bulk density was 5.9% higher and saturated hydraulic conductivity (K sat) values were five times lower for pasture treatments relative to buffer treatments. For the 0–10 cm soil depth, CT-measured soil macroporosity (>1,000 μm diam.) was 13 times higher for the buffer treatments compared to the pasture treatments. Buffer treatments had greater macroporosity (0.020 m3 m−3) compared to pasture (0.0045 m3 m−3) treatments. CT-measured pore parameters were positively correlated with K sat. The project illustrates benefits of agroforestry and grass buffers for maintaining soil porosity critical for soil water and nutrient transport.  相似文献   

17.
A study has been conducted to establish the influence of knot area ratio based grading rules on the bending properties of full size Hem-fir (Western Hemlock and Amabilis fir) timber used in Japanese post and beam building construction. Bending strength and modulus of elasticity test results and out turn information on the 105×105 mm2, 90×90 mm2, 45×105 mm2, 30×105 mm2, and 45×90 mm2 specimens are presented in this paper. The in-grade test results indicate that the knot area ratio based grading rules can be successfully applied to the Hem-fir timber.
F. LamEmail: Phone: +1-604-8226256Fax: +1-604-8229104
  相似文献   

18.
Variations in tree ring growth of Quercus suber L. were analysed using dendrochronological techniques on cork oak discs from trees harvested in the cork producing region of Alentejo, Portugal. A tree-ring chronology containing a strong common signal and covering the period from 1970 to 1995 was build for ca. 30-year-old cork oaks never submitted to cork harvesting using 14 trees that crossdated satisfactorily out of 30 sampled trees. The tree ring indices correlated positively with September temperature (r = 0.48, P < 0.05) and very strongly with precipitation totals from previous October until current February (r = 0.82, P < 0.001) showing that the water stored in the soil during the autumn and winter months prior to the growing season has a primordial effect on the growth of the given season. The effects of cork harvesting were analysed by comparing mean ring width, mean annual vessel area, vessel density (n°vessels/mm2), and vessel coverage (percentage of transverse surface occupied by vessels) between three mature cork oak trees and three young trees, for the period from 1987 to 1996, corresponding to the growth between two consecutive cork removals in the case of mature trees. In 1988, 1989 and 1996 (corresponding to the first and second years after cork removal, and 1996 to a year of cork removal), the ratios between ring widths of young versus mature trees was twice that for the rest of the period. However, an effect of cork removal indicated by eventual alterations in vessel size and distribution in the wood rings corresponding to the years 1988, 1989 and 1996 in the mature cork oaks was not observed.  相似文献   

19.
Holm oak is the hardwood most used for reforestation in Mediterranean Spain, which makes the development of stock quality standards in order to improve establishment success, a priority. However, its nursery culture is characterized by a wide range of practices resulting in stock heterogeneity and a potentially varied outplanting performance. Previous research has focused on specific seedling quality attributes, obviating the integral effect of nursery culture on overall quality. We studied growing regime, seedling quality, and field performance in nine holm oak stocklots produced in commercial nurseries during two consecutive growing years. Results proved variations in field performance were related to stocklot quality and, hence, to the growing regime practised. This dependence on stock quality may vary with planting site weather: in the drier year, survival was related to attributes like height, water status and K concentration, while, in the second, milder year, only growth performance was related to nutrient concentrations, plant size and water status. Results indicated the following quality standards for height: 12–17 cm, diameter: 3.5–4.8 mm, shoot and root weights: 1.3–1.6 and 2.8–4.7 g, respectively, N–P–K foliar concentrations: over 10–0.9–3.7 mg g−1, respectively and in water status parameters: EMX < 5 MPa and SWDTL > 15%. These attributes can be adjusted using nursery cultural practices in order to meet seedling quality standards for holm oak for planting across similar sites.  相似文献   

20.
A micropropagation protocol was developed for Celastrus paniculatus, a vulnerable medicinal plant. Cultures were initiated from nodal explants collected from young shoots of a 12-year-old plant in MS basal medium. An average of five shoots were produced in MS medium supplemented with 1.5 mg l−1 benzyl adenine (BA) and 0.1 mg l−1 naphthalene acetic acid (NAA) after two subculture cycles with a 30-day interval. Continuous subculture in the same medium for three more cycles resulted in reduction of the number of multiple shoots (2 or 3 shoots), vitrification of the shoots, and callus formation. Vitrification of cultures could be overcome by the use of MS medium supplemented with lower concentrations of BA (0.05 mg l−1) and NAA (0.01 mg l−1). Among the various rooting trials, ex vitro rooting of shoots with simultaneous hardening was most efficient. The method standardized in the present study is simple, as it eliminated separate steps for in vitro rooting and hardening. Qualitative chemical similarity of the tissue culture regenerants with the mother plant was confirmed using high performance thin-layer chromatographic (HPTLC) profiling.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号