共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Donatien Pascal Kamdem Nzokou Pascal Doug Herman Zuju Shu 《Wood material science & engineering》2020,15(1):30-36
ABSTRACTTwo formulations of wood preservative one containing water-dispersible copper naphthenate (CuN) alone and in combination with sodium fluoride (NaF) were used to treat southern pine sapwood blocks to determine the effect of the addition of sodium fluoride in the QNS on the protection against wood decay fungi using laboratory soil block tests following AWPA (American Wood protection Association) standard E10-16 [American Wood Protection Association AWPA-E10. (2016) Laboratory Method for Evaluating the Decay Resistance of Wood-based Materials Against Pure Basidiomycete Cultures: Soil/Block Test]. The standard consists in exposing treated blocks to pure monoculture of white rot (Irpex lacteus (FP-105915) and Trametes versicolor (R-105)) and brown rot fungi (Gloeophyllum trabeum (Madison 617) and Postia placenta (Madison 698) during a specific period. The weight loss (WL) in percentage of treated blocks was used as an indicator of the biological performance of treated blocks against basidiomycetes at specific retentions. Minimum WL was obtained with blocks treated with the formulation containing mixture of QNS and sodium fluoride with the retention of 0.29?kg/m3 Cu and 0.51?kg/m3 of fluorine in treated blocks. A copper retention of 1.65?kg/m3 from blocks treated with formulations containing only QNS was needed to obtain similar WL to blocks containing blocks Cu++ and F? (fluorine). The lower Cu retention is attributed to a combination of the presence of the fluorine with some toxic activities against bacteria and decay and the interaction of anions fluorine and ionic Cu (II) in the aqueous treating solutions to form more soluble biological toxic hydrate of copper fluoride ((H2O Cu (II) F2) in treated blocks compared to copper complexes less biological available in water-dispersible CuN-treated bocks. 相似文献
12.
Michael Heym Ricardo Ruíz-Peinado Miren Del Río Kamil Bielak David I. Forrester Gerald Dirnberger Ignacio Barbeito Gediminas Brazaitis Indrė Ruškytkė Lluís Coll Marek Fabrika Lars Drössler Magnus Löf Hubert Sterba Václav Hurt Viktor Kurylyak Fabio Lombardi Dejan Stojanović Jan Den Ouden Renzo Motta Maciej Pach Jerzy Skrzyszewski Quentin Ponette Géraud De Streel Vit Sramek Tomáš Čihák Tzvetan M. Zlatanov Admir Avdagic Christian Ammer Kris Verheyen Buraczyk Włodzimierz Andrés Bravo-Oviedo Hans Pretzsch 《Annals of Forest Science》2017,74(3):63
Key message
This data set provides unique empirical data from triplets of Scots pine ( Pinus sylvestris L.) and European beech ( Fagus sylvatica L.) across Europe. Dendrometric variables are provided for 32 triplets, 96 plots, 7555 trees and 4695 core samples. These data contribute to our understanding of mixed stand dynamics. Dataset access at http://dx.doi.org/10.5061/dryad.8v04m . Associated metadata available at https://metadata-afs.nancy.inra.fr/geonetwork/apps/georchestra/?uuid=b3e098ca-e681-4910-9099-0e25d3b4cd52&hl=eng .13.
Andreas Hill Henning Buddenbaum Daniel Mandallaz 《European Journal of Forest Research》2018,137(4):489-505
A timber volume regression model applicable to the state and communal forest area of the federal German state of Rhineland-Palatinate is identified using a combination of airborne laser scanning (ALS)-derived metrics and information from a satellite-based tree species classification map available on the federal state level. As is common in many forest inventory datasets, strong heterogeneity in the ALS data due to different acquisition dates and misclassifications in the tree species classification map had noticeable effects on the regression model’s performance. This article specifically addresses techniques that improve the performance of ordinary least square regression models under such restricting conditions. We introduce a calibration technique to neutralize the effect of misclassifications in the tree species variable that originally caused a residual inflation of 0.05 in adjusted \(R^2\). Incorporating the calibrated tree species information improved the model accuracy by up to 0.07 in adjusted \(R^2\) and suggests the use of such information in forthcoming inventories. We also found that including ALS quality information as categorical variables within the regression model considerably mitigates issues with time lags between the ALS and terrestrial data acquisition and ALS quality variations (increase of 0.09 in adjusted \(R^2\)). The model achieved an adjusted \(R^2\) of 0.48 and a cross-validated root-mean-square error (RMSE\(_{\mathrm{cv}}\)) of 46.7% under incorporation of the tree species and ALS quality information and was thus improved by 0.12 in adjusted \(R^2\) (5% in RMSE\(_{\mathrm{cv}}\)) compared to the simple model only containing ALS height metrics (adjusted \(R^2=0.36\), RMSE\(_{\mathrm{cv}}=51.7\)%). 相似文献
14.
Rempei Suwa 《Journal of Forest Research》2013,18(3):238-245
The wave attenuation function of a Japanese black pine forest was evaluated based on its growth at different initial planting densities (P ini) using the spatially explicit, individual-based, dynamic global vegetation model. The forest dynamics were simulated for 150 years utilizing datasets for tree density and stem diameter at different stand ages obtained in the field. To elucidate the ability of the forest to reduce the wave height $ \eta_{t} $ (m), a long linear wave that propagates on dry ground was assumed. The attenuation of $ \eta_{t} $ (m) was expressed as follows: $ \eta_{t} = \eta_{t0} \exp ( - k_{\text{i}} x) $ , where $ \eta_{t0} $ , x, and k i are the initial wave height (m), the distance (m), and the wave attenuation coefficient (m?1), respectively. The tree destruction caused by the waves was considered in order to estimate k i. The model suggested that there was a peak age that maximized k i and was dependent on $ \eta_{t} $ , and that the maximum k i attained decreased with increasing $ \eta_{t} $ . When P ini was varied widely from 0.5 to 4 m?2, the maximum k i for a relatively low wave height (≤3 m) changed dramatically. For example, when $ \eta_{t} = 2{\text{ m}},$ the maximum k i ranged from 0.008 to 0.031 m?1, depending on P ini. Thus, utilizing a relatively low P ini would be an efficient way of quickly creating a forest capable of sufficient wave attenuation in areas where a relatively high wave height (≥4 m) is expected. It was concluded that regular harvesting and planting would be required to realize the full potential of the coastal forests to attenuate waves, and that tailoring P ini is one of the management options that could be used to establish a wave prevention forest. 相似文献
15.
Makrem Afif Chokri Messaoud Abdennacer Boulila Hnia Chograni Afef Bejaoui Mohamed Nejib Rejeb Mohamed Boussaid 《Annals of Forest Science》2008,65(7):710-710
16.
Performances of Pinus taxa were studied to 10 years of age in two trials in each of Misiones and Entre Ríos provinces across the Mesopotamia region of Argentina. Taxa comprised 22 populations from sources in Argentina, Australia, Brazil and Zimbabwe including Pinus elliottii var. elliottii (Pee), Pinus caribaea var. hondurensis (Pch), their four, inter-specific hybrids (F1, F2 and backcrosses from F1 to Pch and to Pee—all as broadly based bulks); other Pee and Pinus taeda (Pt) comprised narrower or unspecified bulks. Variable numbers of taxa were missing at each site. Mean survival across sites at age 10 years ranged 53.2–91.3% averaging 74.2%. Analysis of variance of plot means indicated population effect was statistically significant (p < 0.05) for all or most growth and quality traits at all sites. However, significant differences from the nominated check seedlot at the Entre Ríos sites (Pee, Australia) were extremely rare, while quite common at the northern, Misiones sites (check seedlot a Pt population). In the Misiones trials, F1, F2 and both backcross hybrids showed better stem straightness than Pee and Pt from Argentina, generally with statistically significant differences (p < 0.05). Pt showed lowest forking scores (desirable). Taxon × environment interaction was statistically significant (p < 0.01) for growth traits only (p > 0.05). However, this interaction contributed an average of only 34.1% of the taxon variance suggesting a lack of practical importance. Taxa most suitable for deployment in the Mesopotamia region, Argentina are suggested. 相似文献
17.
Pankaj Lal Janaki R. R. Alavalapati Marian Marinescu Jagannadha Rao Matta Puneet Dwivedi Andres Susaeta 《Journal of Sustainable Forestry》2013,32(8):736-755
Bioenergy production has increased significantly in the last decade, and recent legislative efforts such as the discussion draft for the American Clean Energy and Security Act of 2009 and the Energy Independence and Security Act (EISA) of 2007 are expected to encourage even more growth. The growing demand for bioenergy will necessitate production of large quantities of woody biomass and plant residues if it is to be met. However, concerns are being raised as to how increased pressures will affect the sustainability of woody biomass. In order to avoid potential pitfalls and ensure the sustainability of wood-based bioenergy systems, a set of sustainability indicators needs to be developed. Some of these indicators can be based on standards similar to those developed for sustainable forest management, energy balances, greenhouse gas emission reductions, and existing codes and guidelines for biomass harvesting. This article discusses a potential set of sustainability indicators encompassing ecological, economic, and social principles for harvesting woody biomass for bioenergy. The extent to which existing standards and certification systems reflect these indicators is elaborated upon. Methods for making these standards operational are also suggested. 相似文献
18.
19.
20.
A simple theory to link bole surface area,stem density and average tree dimensions in a forest stand 总被引：1，自引：0，他引：1
Vladimir L. Gavrikov 《European Journal of Forest Research》2014,133(6):1087-1094
A geometrical model of a forest stand has been analyzed. A forest stand has been modeled as a population of cones which was described by the change of total bole surface area with density \(\hat{S}(N)\) , relation between density and a horizontal dimension (radius r) r(N), and the relation between vertical dimension (generatrix l) and radius l(r). It has been shown that there are close relationships between \(\hat{S}(N)\) , l(r) and r(N). In case of \(\hat{S}(N) = const\) , power exponent of l(r) can be predicted from the power exponent of r(N) and vice versa. A comparison of the model analysis with the data available on Scots pine (Pinus sylvestris L.) stands has been performed. In spite of the model simplicity, its inferences proved to be workable in many cases where the data can be interpreted as a dynamics of an even-aged forest stand. In particular, if the estimation of total bole surface area is constant, the power exponent in the relation of diameter and stand density DBH(SD) can be calculated on the basis of the power exponent in the relation of height and diameter H(DBH) and vice versa. Possible limitations and the meaning of the analysis are discussed. 相似文献