首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
S. Singh    R. K. Gumber    N. Joshi    K. Singh 《Plant Breeding》2005,124(5):477-480
Interspecific hybridization is known to improve productivity and resistance to diseases in many crops. Therefore, an attempt was made to introgress productivity and disease resistance into chickpea from wild Cicer species. The true F1 hybrids of cultivated chickpea genotypes ‘L550’ and ‘FGK45’ with C. reticulatum were backcrossed twice to their cultivated female parents to minimize the linkage drag of undesirable wild traits. The pedigree method was followed to advance the segregating populations from straight crosses (without backcross) and BC1/BC2 generations to F5–F7. The interspecific derivatives recorded up to a 16.9% increase over the check cultivars and a 25.2% increase over the female parent in a preliminary yield evaluation trial. Of the 22 interspecific derivatives thus derived, four desi and two kabuli lines were further evaluated for seed yield in replicated trials at three diverse locations. These lines possess a high degree of resistance to wilt, foot rot and root rot diseases, and recorded a 6.1–17.0% seed yield increase over the best check cultivars.  相似文献   

2.
Ascochyta blight is a major fungal disease affecting chickpea production worldwide. The genetics of ascochyta blight resistance was studied in five 5 × 5 half-diallel cross sets involving seven genotypes of chickpea (ICC 3996, Almaz, Lasseter, Kaniva, 24B-Isoline, IG 9337 and Kimberley Large), three accessions of Cicer reticulatum (ILWC 118, ILWC 139 and ILWC 184) and one accession of C. echinospermum (ILWC 181) under field conditions. Both F1 and F2 generations were used in the diallel analysis. The disease was rated in the field using a 1–9 scale. Almaz, ICC 3996 and ILWC 118 were the most resistant (rated 3–4) and all other genotypes were susceptible (rated 6–9) to ascochyta blight. Estimates of genetic parameters, following Hayman’s method, showed significant additive and dominant gene actions. The analysis also revealed the involvement of both major and minor genes. Susceptibility was dominant over resistance to ascochyta blight. The recessive alleles were concentrated in the two resistant chickpea parents ICC 3996 and Almaz, and one C. reticulatum genotype ILWC 118. The wild Cicer accessions may have different major or minor resistant genes compared to the cultivated chickpea. High narrow-sense heritability (ranging from 82% to 86% for F1 generations, and 43% to 63% for F2 generations) indicates that additive gene effects were more important than non-additive gene effects in the inheritance of the trait and greater genetic gain can be achieved in the breeding of resistant chickpea cultivars by using carefully selected parental genotypes.  相似文献   

3.
Chickpea shows a distinct domestication trajectory vis‐a‐vis pod dehiscence and growth cycle mediated by vernalization insensitivity compared with its companion Near Eastern legumes. Our objectives were: (i) to map the quantitative trait loci (QTLs) associated with vernalization response and seed free tryptophan in domesticated × wild chickpea progeny and (ii) estimate the genetic correlation between vernalization response and free tryptophan content. A domesticated × wild chickpea cross was used to document phenotypic segregation in both traits and to construct a skeletal genetic map for QTL detection. A number of vernalization response and seed free tryptophan content QTLs were documented in both F2 and F3 generations. No significant genetic correlation between these two traits was observed. Epistatic relationship between two free tryptophan loci was documented. It is evident that selection for high seed tryptophan is easier to accomplish relative to selection for vernalization insensitivity. This suggests that the two traits were selected independently in antiquity, thereby corroborating earlier claims for conscious selection processes associated with chickpea domestication.  相似文献   

4.
Wild Lens taxa are invaluable sources of useful traits for broadening genetic base of cultivated lentil. Nine inter‐sub‐specific and interspecific crosses were made successfully between cultivated (Lens culinaris ssp. culinaris) and wild lentils (L. culinaris ssp. orientalis, odemensis, lamottei and ervoides). The effect of species groups, day length and temperature on crossability in lentils was evident under normal winter sowing in New Delhi and in summer Himalayan nursery at Sangla in Himachal Pradesh, India, although pollen fertility assessed in all the cross‐combinations showed no significant variation. True hybridity of nine inter‐sub‐specific and interspecific crosses was confirmed through morphological and molecular (ISSR) markers, in which three of 120 primers could confirm the hybridity of all the crosses. All cross‐combinations were also studied for important quantitative traits related to yield. The range, mean and coefficient of variation were estimated in parental lines, F1 and F2 generations to determine the extent of variability generated in cultivated lentils through the introgression of genes from wild L. taxa. A high level of heterosis was observed in F1 crosses for important traits studied. Substantially higher variations for seed yield and its attributing traits were exhibited in F2 generations indicating transgressive segregation. The results of the present investigation revealed that wild L. taxa can be successfully exploited for lentil improvement programmes, and the variations generated could be easily utilized for broadening the genetic base of cultivated lentil gene pool for improving the yield as well as wider adaptation.  相似文献   

5.
The gene effects of Cicer reticulatum on both double‐podding as qualitative traits and yield criteria as quantitative traits in interspecific hybridization with cultivated chickpea (Cicer arietinum) have not yet been elucidated, despite the easy acquisition of hybrid progeny between two species. This study sought to answer three questions concerning qualitative and quantitative traits in reciprocal crosses between C. arietinum and C. reticulatum. (i) Is there a similarity in the gene effects of flower colour, pigmentation and double‐podded traits in reciprocal interspecific crosses? (ii) What are the expressivity and penetrance of the double‐podded trait in interspecific crosses? (iii) Which heterosis predicts the occurrence and the extent of transgressive variation? The materials for this study were F1, F2 and F3 progeny derived from a reciprocal cross between C. arietinum and C. reticulatum. As qualitative traits, purple flower colour, pigmentation and single‐podded traits in C. reticulatum were governed by a dominant single gene. Purple flower colour and pigmentation were detected to be linked traits as all progeny had the same phenotypes. As quantitative traits, yield criteria in progeny which were double‐podded had higher values than the single‐podded counterparts. Expressivity and penetrance of the double‐podding trait were superior in progeny derived from C. reticulatum × C. arietinum. The results showed that fruitful heterosis was more useful than residual heterosis in F3 as residual heterosis was mostly negative and fruitful heterosis was suggested in self‐pollinated species such as chickpea that lacks inbreeding depression. Interspecific transgression was significant with respect to chickpea improvement because it represented a potential source of novel genetic variation.  相似文献   

6.
S. Kumar 《Plant Breeding》1998,117(2):139-142
The inheritance of resistance to Fusarium wilt (race 2) of chickpea was studied in a set of three crosses, i.e. ‘WR315’בC104’ (resistant × susceptible), ‘WR315’בK850’ (resistant × tolerant) and ‘K850’בGW5/7’ (tolerant × tolerant) in order to investigate the number of genes involved, their complementation and to find out whether resistant segregants are possible in a cross between two tolerant cultivars. Tests of F1, F2 and F3 generations of these crosses under controlled conditions at ICRISAT, Patancheru, India, indicated involvement of three loci (two recessive and one dominant alleles). The homozygous recessive form at the first two loci conferred resistance whereas susceptibility occurred when the first two loci were in the dominant form. A dominant allele at the third locus can complement the dominant alleles at the other two loci to confer tolerance. Occurrence of resistant segregants in a cross between two tolerant cultivars was observed.  相似文献   

7.
Wild Cicer species are considered to be more resistant for biotic and abiotic stresses than that of the cultivated chickpea (Cicer arietinum L.). Alien genes conferring resistance for biotic and abiotic stresses can be transferred from wild Cicer species to the cultivated chickpea but success in interspecific hybridizations has already been achieved with only two wild Cicer species. The current study was undertaken to compare fruitful heterosis in F2 and F3 for yield and yield criteria and to identify transgressive segregation in F2 and F3 in reciprocal interspecific crosses between C. arietinum and C. reticulatum Ladiz. We define fruitful heterosis as a useful parameter that can be used instead of residual heterosis. Considerable fruitful heterosis in F2 and F3 was found for number of seeds, pods per plant, biological yield, and seed yield. Maximum values of most of the characteristics in F2 and F3 were higher than that of the best parent indicating that superior progeny could be selected for yield from transgressive segregation. Progeny selection should be based on number of seeds, pods per plant, and biological yield since these characteristics had the highest direct effect on seed yield. The narrow sense heritability was found to be the highest for 100-seed weight. It was suggested that the cultivated chickpea could be used as female parent in interspecific hybridization to increase yield and yield criteria since progeny in F2 and F3 had better performance when it was used as female. In conclusion, interspecific hybridization of wild and cultivated chickpea can be used to improve yield and yield components and resistance to biotic and abiotic stresses as well.  相似文献   

8.
Genetic variation for number of flowers per axis in chickpea (Cicer arietinum L.) includes single-flower, double-flower, triple-flower and multi-flower traits. A double-flowered (DF) line ICC 4929, a triple-flowered (TF) line IPC 99-18 and a multi-flowered (MF) line JGM 7 were intercrossed in all possible combinations and flowering behavior of parents, F1s and F2s was studied to establish allelic relationships, penetrance and expressivity of genes controlling number of flowers per axis in chickpea. The F1 from ICC 4929 (DF) × IPC 99-18 (TF) cross were double-flowered, whereas F1 from ICC 4929 (DF) × JGM 7 (MF) and IPC 99-18 (TF) × JGM 7 (MF) crosses were single-flowered. The F2 from ICC 4929 (DF) × IPC 99-18 (TF) cross gave a good fit to a 3:1 ratio for double-flowered and triple-flowered plants. The F2 from ICC 4929 (DF) × JGM 7 (MF) cross segregated in a ratio of 9:3:3:1 for single-flowered, double-flowered, multi-flowered and double-multi-flowered plants. The F2 from IPC 99-18 (TF) × JGM 7 (MF) cross segregated in a ratio of 9:3:4 for single-flowered, triple-flowered and multi-flowered plants. The results clearly established that two loci control number of flowers per axis in chickpea. The double-flower and triple-flower traits are controlled by a single-locus (Sfl) and the allele for double-flowered trait (sfl d ) is dominant over the allele for triple-flower trait (sfl t ). The three alleles at the Sfl locus has the dominance relationship Sfl > sfl d > sfl t . The multi-flower trait is controlled by a different gene (cym). Single-flowered plants have dominant alleles at both the loci (Sfl_ Cym_). The double-flower, the triple-flower and the multi-flower traits showed complete penetrance, but variable expressivity. The expressivity was 96.3% for double-flower and 76.4% for double-pod in ICC 4929, 81.2% for triple-flower and 0.0% for triple-pod in IPC 99-18, and 51.3% for multi-flower and 24.7% for multi-pod in JGM 7. Average number of flowers per axis and average number of pods per axis were higher in JGM 7 than double-flowered line ICC 4929 and triple-flowered line IPC 99-18. The results of this study will help in development of breeding strategies for exploitation of these flowering and podding traits in chickpea improvement.  相似文献   

9.
Ascochyta blight is a devastating disease of chickpea. Breeders have been trying to introduce resistance from wild Cicer into cultivated chickpea, however, the effort is hampered by the frequent genetic drag of undesirable traits. Therefore, this study was aimed to identify potential markers linked to plant growth habit, ascochyta blight resistance and days to flowering for marker-assisted breeding. An interspecific F2 population between chickpea and C. reticulatum was constructed to develop a genetic linkage map. F2 plants were cloned through stem cuttings for replicated assessment of ascochyta blight resistance. A closely linked marker (TA34) on linkage group (LG) 3 was identified for plant growth habit explaining 95.2% of the variation. Three quantitative trait loci (QTLs) explaining approximately 49% of the phenotypic variation were found for ascochyta blight resistance on LG 3 and LG 4. Flowering time was controlled by two QTLs on LG3 explaining 90.2% of the variation. Ascochyta blight resistance was negatively correlated with flowering time (r = −0.22, P < 0.001) but not correlated with plant growth habit.  相似文献   

10.
Heterosis, or hybrid vigour, has been used to improve seed yield in several important crops for decades and it has potential applications in soybean. The discovery of over‐dominant quantitative trait loci (QTL) underlying yield‐related traits, such as seed weight, will facilitate hybrid soybean breeding via marker‐assisted selection. In this study, F2 and F2 : 3 populations derived from the crosses of ‘Jidou 12’ (Glycine max) × ‘ZYD2738’ (Glycine soja) and ‘Jidou 9’ (G. max) × ‘ZYD2738’ were used to identify over‐dominant QTL associated with seed weight. A total of seven QTL were identified. Among them, qSWT_13_1, mapped on chromosome 13 and linked with Satt114, showed an over‐dominant effect in two populations for two successive generations. This over‐dominant effect was further examined by six subpopulations derived from ‘Jidou12’ × ‘ZYD2738’. The seed weight for heterozygous individuals was 1.1‐ to 1.6‐fold higher than that of homozygous individuals among the six validation populations examined in different locations and years. Therefore, qSWT_13_1 may be a useful locus to improve the yield of hybrid soybean and to understand the molecular mechanism of heterosis in soybean.  相似文献   

11.
Genetic Analysis of Developmental Traits in Chickpea   总被引：1，自引：0，他引：1  
Chickpea (Cicer arietinum L.) is an important legume crop in India. The present study was conducted to investigate the inheritance of several developmental traits in three crosses of chickpea, viz., WFWG III’בT20’, ‘T88’בBold Seeded’, and ‘NP34’בP1528-1-1’, each having seven generations. The seven generations were P1, P2, F1, B1, B2, F2, and F3. The experimental lay-out was randomized complete block design with three replications. Data were acquired on days to flowering (DF), days to maturity (DM), plant height in cm (PH), number of primary branches (PB), and number of secondary branches (SB). Generation mean analysis was used to estimate the genetic components; narrow sense heritability was estimated using variance components; and correlation analysis to estimate correlation coefficients among different traits. Genetic differences were found in all three crosses for all traits studied. Additive, dominance, and epistatic effects were found for many traits'. Duplicate epistasis was observed for all traits except number of PB. Higher order interactions and/or linkage were detected for DM and SB. For many traits the relative magnitudes of the genetic effects differed among crosses, thus the extrapolation to other crosses may be difficult. The inheritance becomes more complex as the fate of the character is decided at a later stage in the life cycle. Positive heterosis was observed for some traits, but the exploitation of this component may not Feasible since stable male sterile lines are not available. Early maturity and high yield ‘may be selected independently because of the absence of any significant correlation between these two traits.  相似文献   

12.
D. J. Bonfil    O. Goren    I. Mufradi    J. Lichtenzveig    S. Abbo 《Plant Breeding》2007,126(2):125-129
Terminal drought is a major constraint to chickpea (Cicer arietinum L.) production. Autumn sowing and early flowering have been suggested as ways to benefit from the winter rains in short rainy seasons under dryland cropping. High‐yielding, late‐flowering, simple‐leafed (slv/slv) chickpea cultivars with good field resistance to Ascochyta blight have been bred recently. Changing plant architecture, by altering leaf shape, may affect agronomic performance. As no information is available on the effect of leaf shape on phenology and seed yield, this study was aimed at: (i) introducing the simple leaf trait into an early‐flowering chickpea background; (ii) comparing the grain yield of the two leaf types in early vs. late flowering backgrounds and (iii) producing breeding lines combining early flowering, large seeds and Ascochyta tolerance with both leaf types. Hybrid progeny were studied from the cross of ‘Sanford’ (slv/slv) and ICC7344, (compound, SLV/SLV). Four early‐podding, F8 breeding lines were selected with either simple or compound leaves. In three different field experiments under dryland conditions (334–379 mm), they yielded ca. 1.4 t/ha as compared with 1.0 t/ha in the standard Israeli ‘Yarden’ on one site, but no significant differences in yield were obtained in the other two experiments.  相似文献   

13.
Genetic diversity estimates in Cicer using AFLP analysis   总被引：2，自引：0，他引：2  
Amplified fragment length polymorphism (AFLP) analysis was used to evaluate the genetic variation among cultivated chickpea and wild Cicer relatives. In total, 214 marker loci were assessed, of which 211 were polymorphic (98.6%) across the 95 accessions that represented 17 species of Cicer. The genetic variation within a species was highest in C. pinnatifidum followed by C. reticulatum and lowest in C. macracanthum. Three main species groups were identified by UPGMA clustering using Nei's pair‐wise distance calculations. Group I included the cultivated species C. arietinum, C. reticulatum and C. echinospermum. Within this group, C. reticulatum accessions were clustered closest to the C. arietinum cultivars ‘Lasseter’, ‘Kaniva’ and ‘Bumper’, supporting the hypothesis that C. reticulatum is the most probable progenitor of the cultivated species. Cicer bijugum, C. judaicum and C. pinnatifidum were clustered together creating group II. Group III contained all nine perennial species assessed and two annual species C. yamashitae and C. cuneatum. The genetic distance detected between group I and group III (0.13) was equivalent to the genetic distance detected between group I and group II (the primary and annual tertiary species, respectively; 0.14). This indicated that the perennial tertiary species may be as valuable for increasing variation to incorporate novel germplasm in the cultigen as the annual tertiary species.  相似文献   

14.
The present study was conducted to investigate the genetic inheritance of morpho-physiological leaf traits in chickpea (Cicer arietinum L.). The experimental material comprised six generations, viz., two inbred parents, ‘T88’ and ‘Bold Seeded’, having contrasting leaf traits, and their derived F1, F2 and backcross of F1 to either parent (B1 and B2). The experiment was randomized complete block design with three replications. Genetic parameters were estimated by generation mean analysis using all the six generations. Data were collected on individual plants within each family just before flowering on leaflet area (LA), number of leaflets per leaf (LL), rachis length (RL), and leaflet density (LD), which was calculated as number of leaflets per unit length of rachis. A simple additive-dominance model was found to be adequate to describe the inheritance of LL and LA, while dominance × dominance (i.e. [1]) and additive × dominance (i.e. [i]) interactions were also significant for RL and LD, respectively. Improvement or seed yield per plant may result from selection for LA by improving both RL and LL. Leaflet area may be included in the ongoing selection schemes, as a supplementary trait to increase the speed of improvement in seed yield per plant. Lanceolate leaflet shape was observed to be monogenically dominant over obovate leaflet shape, and segregated independently from purple/white flower color.  相似文献   

15.
‘Polima’ cytoplasmic male sterility (CMS) was transferred from ‘Polima’ Brassica napus ‘ISN 706’to five different cultivars of Brassica campestris (‘Pusa kalyani’, ‘Pant toria’, ‘Candle’, ‘Tobin’ and ‘ATC 94211′) by repeated backcrossing. It was observed that, while ‘Polima’ CMS manifested complete and stable male sterility in the nuclear backgrounds of ‘Pusa kalyani’, ‘Pant toria’, and ‘Tobin’, the cultivars ‘Candle’ and ‘ATC 94211’possessed the restorer gene for this CMS in the heterozygous condition. An analysis of F1 and F2 generations of ‘Polima’‘Pusa kalyani’בCandle’ and ‘Polima’‘Pusa kalyani’בATC 94211’ revealed that restoration is controlled by a single dominant gene. Identification of stable maintainers and restorers of ‘Polima’ CMS could facilitate the development of hybrid varieties in B. campestris.  相似文献   

16.
S. Srinivasan    P. M. Gaur    B. V. Rao 《Plant Breeding》2008,127(3):319-321
Stem fasciation is a morphological abnormality observed in plants where the stem is widened and leaves and flowers or pods are clustered at the apex. Several spontaneous mutants and one induced mutant for stem fasciation are found in chickpea (Cicer arietinum L.). This study was aimed at determining allelic relationship between spontaneous and induced mutant genes controlling stem fasciation and effects of stem fasciation on grain yield. Two spontaneous (ICC 2042 and ICC 5645) and one induced (JGM 2) stem fasciation mutants were crossed in all combinations, excluding reciprocals. The F1 and F2 plants from a cross between the two spontaneous mutants had fasciated stem. This indicated the presence of a common gene (designated fas1) for stem fasciation in the two spontaneous mutants. The F1s of the crosses of the induced mutant JGM 2 with both spontaneous mutants had normal plants and segregated in a ratio of 9 normal : 7 fasciated plants in F2. Thus, the gene for stem fasciation in the induced mutant JGM 2 (designated fas2) is not allelic to the common gene for stem fasciation in spontaneous mutants. The two genes in dominant condition produced normal non‐fasciated stem. The fasciated and the non‐fasciated F2 plants did not differ significantly for number of pods per plant, number of seeds per plant, grain yield per plant and seed size, suggesting that it is possible to exploit the fasciated trait in chickpea breeding without compromising on yield.  相似文献   

17.
Mapping genes for double podding and other morphological traits in chickpea   总被引：4，自引：0，他引：4  
Seed traits are important considerations for improving yield and product quality of chickpea (Cicer arietinum L.). The purpose of this study was to construct an intraspecific genetic linkage map and determine map positions of genes that confer double podding and seed traits using a population of 76 F10 derived recombinant inbred lines (RILs) from the cross of ‘ICCV-2’ (large seeds and single pods) × ‘JG-62’ (small seeds and double podded). We used 55 sequence-tagged microsatellite sites (STMS), 20 random amplified polymorphic DNAs (RAPDs), 3inter-simple sequence repeats (ISSR) and 2 phenotypic markers to develop a genetic map that comprised 14 linkage groups covering297.5 cM. The gene for double podding (s) was mapped to linkage group 6 and linked to Tr44 and Tr35 at a distance of7.8 cM and 11.5 cM, respectively. The major gene for pigmentation, C, was mapped to linkage group 8 and was loosely linked to Tr33 at a distance of 13.5 cM. Four QTLs for 100 seed weight (located on LG4 and LG9), seed number plant-1 (LG4), days to 50% flower (LG3) were identified. This intraspecific map of cultivated chickpea is the first that includes genes for important morphological traits. Synteny relationships among STMS markers appeared to be conserved on six linkage groups when our map was compared to the interspecific map presented by Winter et al. (2000). This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

18.
A top‐cross‐mating design among 29 S4 inbred lines and tester (cultivar ‘Dukat’) was carried out to study their breeding value in terms of general combining ability (GCA). The objectives of this study were to evaluate the acidity, soluble solids and dry matter contents in fruits of progeny F1 in comparison with S4 inbred lines as well as the cultivars (S0); identify strawberry genotypes with high value of GCA for use in cultivar development; and determine mid‐parent heterosis regarding S4 inbred lines and cultivated strawberry. The 2‐year observations showed statistically significant differences between tested genotypes in terms of the studied traits. The highest breeding value based on GCA was estimated for Chandler 123‐5 for soluble solids and dry matter content, and Kent 7‐6 for acidity. Estimated mid‐parent heterosis had positive and negative values. The highest heterosis in terms of extract and dry matter content (26.71% and 17.50%, respectively) occurred in the offspring Chandler 123‐5 × ‘Dukat’, but as regards acidity in hybrid Chandler 123‐22 with cv. ‘Dukat’. The study of genetic divergence by dendrograms may help to identify parents suitable for obtaining hybrids with higher heterosis effects.  相似文献   

19.
  相似文献   

20.
Fusarium wilt caused by Fusarium oxysporum Schlechtend.: Fr f. sp. ciceris (Padwick) Matuo & Sato is a devastating disease of chickpea. The current study was conducted to determine the inheritance of the gene(s) for resistance to race 4 of fusarium wilt and to identify linked RAPD markers using an early wilting line, JG-62, as a susceptible parent. Genetic analysis was performed on the F1s, F2s and F3 families from the cross of JG-62 × Surutato-77. The F3 families were inoculated with a spore suspension of the race 4 wilt pathogen and the results were used to infer the genotypes of the parent F2 plants. Results indicated that two independent genes controlled resistance to race 4. Linkage analysis of candidate RAPD marker, CS-27700, and the inferred F2 phenotypic data showed that this marker locus is linked to one of the resistance genes. Allelism indicated that the two resistance sources, Surutato-77 and WR-315, shared common alleles for resistance and the two susceptible genotypes, C-104 and JG-62, carried alleles for susceptibility. The PCR-based marker, CS-27700, was previously reported to be linked to the gene for resistance to race 1 in a different population which suggested that the genes for resistance to races 1 and 4 are in close proximity in the Cicer genome. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号