共查询到18条相似文献，搜索用时 250 毫秒
1.
利用分隔网片将桁拖网渔具网囊分为上下2层(虾囊和鱼囊)以实现虾类和鱼类渔获分离,对于改善桁拖网渔具作业性能、提高目标种类渔获质量以及实现选择性捕捞具有重要的意义.为分析不同网日尺寸(60mm、75mm和90mm)分隔网片对主要渔获种类的分隔效率,在吕泗渔场开展了2个航次的海上生产实验.利用分隔装置性能分析模型,对哈氏仿对虾(Parapenaeopsis hardwickii)和葛氏长臂虾(Palaemon gravier)的渔获数据进行拟合.结果表明,不同虾类接触分隔网片的概率没有显著性差异;虾类个体50%接触概率体长约为40mm,表明大多数进入网具的虾类都能接触分隔网片.随着分隔网片网目尺寸增大,50%选择体长也逐渐增大.因此,分隔网片的分隔效率随之提高.鱼囊和虾囊的网目尺寸相同,但结构有所差异.比较在不同网囊尺寸选择性假设条件下渔获数据的拟合结果后发现,鱼囊和虾囊具有相同选择性的假设更为合理;通过比较发现,分隔网片对虾类的尺寸选择性与相同网目尺寸的网囊选择性具有较大的差异.本研究还对产生这一差异的原因进行了探讨. 相似文献
2.
利用几何相似原理将传统的过滤性渔具选择性曲线转化为选择性曲面。运用选择性方程，并假设不同网目大小的渔具对相同尺寸渔获个体的渔获服从多项分布后，对过滤性渔具的网目选择性建立模型。使用极大似然估计法对模型进行拟合，同时，通过假设检验对模型进行简化。使用平行作业法试验条件下的张网渔具的黄鲫(Setipinrm taty)渔获数据进行模型拟合。结果显示，所建模型可以在没有对照网的情况下估算出各不同网目大小网囊的选择率，并同样适用于套网法试验条件下的选择性分析。模型的建立为今后进行过滤性渔具网目选择性试验方法改革提供了理论参考。通过与SELECT模型比较，认为模型使用选择性方程并区分渔获能力和捕捞努力量使得模型更具普遍性。 相似文献
3.
大鹏湾捕虾拖网渔获分隔试验的效果分析 总被引：4，自引：0，他引：4
捕虾拖网渔业的特点是渔获组成多样性和渔获抛弃率高。在我国南海捕虾拖网渔业中,尚没有关于改善渔具种类选择性的研究。试验采用蝴蝶拖网作为试验网具,在网囊前部安装不同网目尺寸(130和110mm)和网目形状(方形和菱形)的分隔网片,将网囊分为2层即上层的虾袋和下层的鱼袋,并估算了分隔网片对主要虾类渔获的分隔率;除此以外,还通过安装TED来改善分隔网片的分隔效果。试验结果显示,虾袋中虾类渔获个体较鱼袋中的大,对比不同分隔网片设计的分隔率发现,网目尺寸对分隔效率具有显著的影响,而不同网目形状的分隔率没有显著差异;安装TED可以有效改善分隔网片的分隔效果。 相似文献
4.
大网目拖网是我国海洋渔业捕捞带鱼的重要渔具。为提高拖网网囊选择性, 本研究在南海区采用套网法对双船大网目拖网 4 组网目尺寸(30、35、40 和 45 mm)的网囊进行实验, 在双重拔靴法的架构下, 拟合选择性参数、比较选择性的差异、估算捕捞方式指标。结果表明, 随着网目尺寸的增大, 网囊对带鱼的 50%选择体长增大, 对带鱼幼鱼个体的选择率显著下降, 带鱼幼鱼的渔获比例也呈下降趋势。结合带鱼最小可捕规格(23.0 cm)管理规定, 结果还表明网目尺寸为 40 mm 的网囊选择性较差, 其对带鱼的抛弃率大于 93%。为了进一步提高带鱼拖网渔业的资源养护水平, 还需要开展更多的选择性实验。 相似文献
5.
为改善东海近海桁拖网对主要虾类的选择性,使用对比作业法,在吕泗渔场开展了多个航次、不同网目结构（菱形、方形及转向网目）网囊的选择性试验,并进行了选择性分析。在选择性分析中,将几何相似原理运用于选择性曲线模型（Richards曲线）,并使用极大似然估计法进行参数估计,同时使用假设检验理论对选择性曲线模型进行简化。选择性模型对哈氏仿对虾（Parapenaeopsis hardwickii）和葛氏长臂虾（Palaemon gravier）渔获数据的拟合结果显示,选择性模型具有较好的拟合性,但存在航次间差异;不同网目结构网囊的选择性曲线模型都可简化为Logistic曲线;对于哈氏仿对虾,相比菱形网目网囊,方形网目和转向网目网囊的L50较大,而SR较小（菱形和方形网目之间差异显著,菱形和转向网目之间差异不显著）;对于葛氏长臂虾,方形网目和转向网目网囊的L50较大（菱形和方形网目之间差异显著,菱形和转向网目之间差异不显著）。根据虾类在网囊中的逃逸行为,方形网目、转向网目具有较好选择性的原因在于这2种网目较传统菱形网目不易合拢;不同网目结构网囊的选择性对开展渔具种类选择性研究具有重要意义。 相似文献
6.
广东大鹏湾虾拖网网囊网目选择性研究 总被引：2，自引：4，他引：2
虾拖网渔业是南海海域重要的作业方式之一,但尚未有关该渔业网目尺寸选择性的报道。为评价虾拖网渔具的渔获性能、合理利用虾类资源,在广东大鹏湾进行了网目选择性试验。试验采用双支架虾拖网作为试验网具,并使用套网法估算了网目内径为35、40和45 mm的网囊对主捕虾类的选择性。结果显示,虾类渔获中刀额新对虾、须赤虾、周氏新对虾和日本囊对虾渔获数量较多,比较以往资料,刀额新对虾和周氏新对虾优势体长、平均体长均有所下降,其它2种虾类平均体长未见明显变化;选择性分析结果显示,主捕虾类的L50随网目尺寸线性增大。根据试验结果并结合历史资料,笔者认为现阶段35 mm的网囊网目尺寸对于保护上述4种虾类资源是比较合适的。 相似文献
7.
在虾拖网渔业的混合渔获中鱼的平均分布率高达81％，不仅鱼类资源有巨大浪费，而且对鱼类资源的繁殖也产生严重影响。为了减少幼鱼副渔获，经常采用网囊的网目选择性。但是，早期的研究证明，许多变量影响拖网和其他移动性渔具中鱼类的尺寸选择。要克服的最大问题之一就是网囊渔获增加后有效网目张开减小。 相似文献
8.
传统捕虾桁拖网渔具网目小、渔获对象繁杂、选择性能差。使用网片式分隔装置、实现渔具的选择性捕捞是缓解这一问题的有效手段之一。2005年秋汛期间,在吕四渔场桁拖网渔业中开展了网目尺寸分别为60、75和90 mm分隔网片的海上生产试验,本文通过蟹类渔获为研究对象,分析分隔网片对其的分隔效果。试验结果显示,使用以个体接触分隔网片概率和网片对个体的留存率为基础的分隔效率模型,对蟹类甲宽分布数据的拟合发现,随着网目尺寸的增大,分隔网片对三疣梭子蟹(Portunus trituberculatus)、细点圆趾蟹(Ovalipes punctatus)的50%留存甲宽和留存率范围均有所增大;而上述2种蟹类个体接触不同网目尺寸分隔网片的概率则没有明显的一致性变化趋势。试验结果表明,蟹类在到达桁拖网网身部时具有一定的游泳能力且具有一定的游泳高度,也反映出使用向下倾斜的分隔网片在结构和装配上是比较合理的。 相似文献
9.
东海区拖网网囊网目选择性研究 总被引：20，自引：2，他引：18
通过东海区拖网网囊网目对带鱼和小黄鱼的选择性试验,对拖网最适网囊网目尺寸进行了分析研究。结果表明：1．网囊网目45mm,小黄鱼和带鱼的逃逸率均较低,渔获中兼捕大量当年生经济幼鱼;2．网囊网目54mm,小黄鱼的50％选择体长尚小于其优势体长组范围,带鱼的50％,选择体长已部分进入其优势体长组范围;3．网囊网目65mm,选择体长范围与选择鱼种的优势体长组范围基本一致。综合分析认为：目前东海区最理想的拖网网囊网目不小于60mm。 相似文献
10.
单桩张网菱形、方形网目网囊选择性研究 总被引：3，自引：0，他引：3
近年来,一种利用帆布作为扩张装置的新型单桩张网渔具在吕四渔场得到了快速发展。为了改善这种张网对主要渔获对象的尺寸选择性,进而评价其渔获性能以及对渔业资源的影响,使用套网试验法开展了不同网目尺寸(25 mm、35 mm和45 mm)的菱形和方形网目网囊尺寸选择性试验。通过对黄鲫(Setipinnataay)和小黄鱼(Pseudosciaena polyactis)渔获体长数据的选择性分析,结果显示,无论是菱形还是方形网目网囊,其50%选择体长L50和选择范围SR都随着网目尺寸的增大而增大(L50呈线性增长)。对比菱形和方形网目的选择性发现,对于黄鲫,50%选择体长L50差异不大,但菱形网目的选择范围SR大于方形网目;对于小黄鱼,方形网目具有更好的选择特性,即具有较大的L50(8%)和较小的SR(52%),但差异均不显著。菱形和方形网目对于不同体型鱼类的选择性差异以及渔民对方形网目网囊的抵触情绪等都使得在张网渔业中推广方形网目网囊值得商榷。 相似文献
11.
单船框架拖网(俗称弓子网)是渤海海区常见的作业渔具,对底栖渔业生物选择性差,作业过程中产生大量副渔获物。为改善网囊网目的选择性,2017年9月在莱州湾海域采用“套网法”对网囊网目尺寸分别为15、25、35、45和55 mm的5种网囊进行了选择性实验。结果显示,弓子网对渔获物种类的选择能力较差,具有捕获栖息于作业海域绝大多数底栖种类的能力。随网囊网目尺寸的增加,渔获物质量、尾数逃逸率和产值损失率逐渐增大,短吻红舌鳎(Cynoglossus joyneri)、口虾蛄(Oratosquilla oratoria)、鹰爪虾(Trachypenaeus curvirostris)和日本鼓虾(Alpheus japonicas)的选择性参数(L0.5、SR)呈线性增加。口虾蛄和鹰爪虾的50%选择体长(L0.5)与网目尺寸(m)的线性回归方程分别为L0.5=1.472m+12.63(R2=0.934)和L0.5=1.394m+0.724(R2=0.920)。在目前的渔业资源状况下,为保护口虾蛄和鹰爪虾等经济渔获物资源,兼顾生产效益和幼鱼资源保护,建议将弓子网最小网目尺寸放大至45 mm。 相似文献
12.
东海张纲张网网囊网目选择性研究 总被引：2，自引：0，他引：2
张纲张网是我国近海渔业的重要作业方式,当前渔业管理中规定了张纲张网网囊最小网目尺寸,但渔民实际使用的网目尺寸与之差异很大,造成渔获中幼鱼比例大。为了更好地掌握网目尺寸对主要捕捞对象的尺寸选择性,于2012年秋季和2013年春季使用平行作业法开展了不同网目尺寸(35、40、45、50、55 mm)网囊的选择性试验。试验结果显示,网囊对小黄鱼(Pseudosciaena polyactis)、带鱼(Trichiurus haumela)和银鲳(Pampus argenteus)的50%选择体长L50随着网目尺寸的增大而增大,表明放大网目尺寸能有效减少幼鱼渔获,L50与网目尺寸(Me)的线性关系为:小黄鱼L50=2.79×Me-1.45,带鱼L50=4.27×Me-38.28,银鲳L50=1.79×Me+28.66。此次试验不同网目尺寸网囊的L50相比其它研究结果较大,推测试验方法的不同可能是导致这一差异的主要原因。结合当前东、黄海主要捕捞对象的可捕规格,认为目前55 mm的网囊网目尺寸能实现张纲张网对3种主要捕捞对象的管理目标。 相似文献
13.
研究拖网网囊选择性对于渔业的科学管理和资源的合理利用都有重要意义。拖网网囊选择性的研究一般先开展捕捞实验,然后使用选择性模型拟合和处理实验数据,最后得出选择性参数和选择性曲线。主要的选择性参数包括50%选择体长(L50)和选择范围(SR)。但是,仅仅提供选择性参数和曲线是不够的,还需要拟合它们的不确定性,并以置信区间的形式展现。双重拔靴法是拟合网囊选择性不确定性的重要方法。本研究在阐述双重拔靴法基本原理的基础上,选取2组实验数据为实例,用常规方法和双重拔靴法进行拟合,通过比较拟合结果诠释双重拔靴法的特点和优势。结果表明,双重拔靴法能够很好地拟合网囊选择性参数L50、SR和曲线的不确定性。同时,本研究还就应用双重拔靴法的重大误区进行了分析和讨论。本研究可为研究人员开展渔具选择性研究提供方法参考。 相似文献
14.
M. K. BROADHURST R. B. MILLAR M. E. L. WOODEN & W. G. MACBETH 《Fisheries Management and Ecology》2006,13(2):81-92
Abstract The relative efficiencies and selectivities of conventional and modified codends were examined in a demersal trawl fishery targeting several species, including eastern king prawns, Penaeus plebejus (Hess), whiting, Sillago spp. and cephalopods. The modifications to codends included: (i) reducing the circumference; (ii) increasing the mesh size in conventional diamond‐mesh designs; and (iii) orientating meshes on the bar so that they were square shaped. The codends were tested against a fine‐meshed control in paired comparisons onboard three commercial trawlers. The conventional codend comprised 41‐mm diamond‐shaped mesh attached to an anterior extension section at a ratio of 150 to 100 meshes and was demonstrated to be non‐selective for the targeted species. Reducing codend circumference to 100 meshes and increasing the size of mesh to 45 mm both improved selection for eastern king prawns, but the lateral mesh openings were estimated to be insufficient to allow juveniles of the other key species to escape. By contrast, codends made from 35‐ and 41‐mm mesh hung on the bar improved the size selection for eastern king prawns and selected stout whiting, Sillago robusta (Stead) (the smallest commercial‐sized fish) across narrow selection ranges and at 50% sizes of retention (L50s) that were closely correlated to the transverse morphology of fish and the maximum mesh opening. With the exception of a reduction in catches of octopus, Octopus spp., by the 41‐square codend, there were no other impacts on commercial catches by the square‐mesh designs. It was concluded that diamond‐mesh codends are inappropriate for use throughout this multispecies fishery and that a modified design comprising at least 35‐mm mesh hung on the bar is required to minimise the fishing mortality of unwanted sizes of the key target species. The results are discussed in terms of the utility of these types of modifications for closely regulating selection in penaeid‐shrimp trawls. 相似文献
15.
Tiger flathead, Neoplatycephalus richardsoni (Castelnau), and sand flathead, Platycephalus bassensis Cuvier, are undifferentiated and managed with a common legal minimum length (LML). The Commonwealth Trawl Sector (CTS) and the Tasmanian Danish‐seine fishery (TDSF) use a minimum codend mesh sizes of 90 and 70 mm, respectively. The codend mesh size should be tailored to the LML, which is based on the length of first maturity of females (M50). This study found the length–girth relationship of N. richardsoni and P. bassensis was not significantly different. Using the covered codend method, these two species had 50% retention lengths (L50) of 294 ± 2 and 307 ± 3 mm, in 70‐mm and 90‐mm codends, respectively. L50 estimates for mesh sizes from this study and others produced a curvilinear relationship: y = 120 ln(x) ? 214, with an r2 of 0.8504. The size at maturity (M50) for female N. richardsoni was 337 mm, which is larger than the estimate for female P. bassensis (247 mm). There is a mismatch between the estimates of L50, the estimates of M50 and the LMLs in each fishery, leading to suboptimal exploitation of female Platycephalus. The model produced in this paper recommends a codend mesh size of 98 mm for both fisheries to exploit Platycephalus species sustainably. 相似文献
16.
Size selectivity of diamond and square mesh codends for hairfin anchovy Setipinna taty in Chinese stow net fisheries 总被引：3，自引：0，他引：3
ABSTRACT: Selectivity experiments of diamond and square mesh codends with different mesh size (30, 35, 40 and 45 mm) for hairfin anchovy Setipinna taty were carried out using the covered codend method in Chinese stow net fisheries. In the present study, 5151 specimens were subsampled and asymmetric and symmetric selectivity curves (Richards and Logistic curves) were fitted to the catch data, using the maximum likelihood method according to the SELECT model. The results show that the Richards curve gives a better fit to the selectivity curve for diamond mesh codends with 30, 35 and 40-mm mesh sizes, whereas the logistic curve gives a better fit for the diamond mesh codend with 45 mm mesh size and square mesh codends with 30, 35, 40 and 45-mm mesh size. With the exception of 45-mm mesh size codends, the L 50 of diamond mesh codends were insignificantly larger than those of square mesh codends. However, the selectivity curves of square mesh codends were steeper than those of diamond mesh codends, except the 30-mm mesh size codends. As for diamond mesh codends, according to the linear relationship between the L 50 and mesh size, 36.5-mm mesh size codends could release 50% juvenile hairfin anchovy (below 1-year old). However, diamond mesh codends with such a mesh size are not selective for other species. 相似文献
17.
Mohamed Salah Mahjoub Seiichi Takeda Toshifumi Hayashi Daisuke Shiode Takafumi Arimoto Tadashi Tokai 《Fisheries Science》2011,77(2):169-181
Codend selectivity for the jack mackerel Trachurus japonicus and the whitefin jack Kaiwarinus equula were evaluated based on data from trouser trawl experiments carried out in the East China Sea, using a test codend of 60 mm diamond mesh and a control codend made of minnow net with a square mesh of 9 mm bar length. Between-haul variations in parameters and the mean selection curves were tested with the catch data in the SELECT approach, and then the model of between-haul variation in the split parameter with the mean selection curve was chosen as the best fit using Akaike’s information criterion model selection. The 50% retention lengths and the selection ranges were 11.4 and 3.36 cm for jack mackerel and 8.83 and 0.93 cm for whitefin jack, respectively. The selection curve for whitefin jack was sharp, whereas that for jack mackerel was relatively wide. As the estimated split parameters indicated, about 80% of the whitefin jack entered the control codend, but 85 and 90% of the jack mackerel entered the control codend in the second and third hauls, respectively. The inequality in the split parameter is discussed from the viewpoint of the animal’s swimming behavior and water movement based on underwater video observations. 相似文献
18.
Antonello Sala Alessandro Lucchetti Corrado Piccinetti Mario Ferretti 《Fisheries Research》2008,93(1-2):8-21
Mediterranean demersal trawl fisheries traditionally operate using small diamond-shape meshes in the codend, which tend to retain almost all animals. We investigated the effect of mesh configuration on the size selectivity of nine species (the scaldfish Arnoglossus laterna, the broad-tail shortfin squid Illex coindettii, the European hake Merluccius merluccius, the red mullet Mullus barbatus, the Norway lobster Nephrops norvegicus, the common pandora Pagellus erythrinus, the deepwater rose shrimp Parapenaeus longirostris, the Mediterranean horse mackerel Trachurus mediterraneus and the poor-cod Trisopterus minutus capelanus) commonly captured in the Mediterranean demersal trawls. Two codends having meshes with the same opening (ca. 38 mm) but different mesh configuration (DM38: diamond-mesh and SM38: square-mesh configuration) were fished daily and alternately on the same trawl. They demonstrated a substantial improvement in selectivity with square-mesh. Selectivity was measured using the covered codend technique, the cover being supported by circular hoops.The results were analysed taking into account the between-haul variation in selectivity. Two other important external variables were identified: the trawling depth and the codend catch, which for some species influenced between-haul variation, but there was no evidence of a coherent effect on selectivity parameters.The selectivity of 40 mm diamond-mesh codend has been reported to be rather poor because a large proportion of the codend catch is immature and smaller than the minimum landing size (MLS) or first maturity size. With the exception of the flatfish (A. laterna), the effect of a change of mesh configuration from diamond- to square-mesh on size selectivity positively affected the retention length at 50% (L50). However, square-meshes were found to be unsuitable for flat and/or deep-bodied fish as these escape more readily from diamond-meshes.The Council Regulation (EC) No. 1967/2006, concerning management measures for the sustainable exploitation of fishery resources in the Mediterranean, establishes the MLS of marine organisms. However, the increase in L50 with square-mesh would not avoid some of the existing contradictions in allowing the use of codend mesh which leads to lower L50 than the MLS. 相似文献