共查询到20条相似文献,搜索用时 453 毫秒
1.
文章针对现有焊接机的人机交互性差、程序不开放等问题,设计了两轴数控系统控制的数控环缝自动焊接机.由数控系统可控制摆动器和焊机的启停工作,使用步进电机来做驱动电机,通过一轴控制焊接工件的旋转位置和速度,另一轴焊枪上下移动的位置和速度.该设计操作简单、效率高效、开放性强、焊接质量可靠、外形美观. 相似文献
2.
朱斌 《农业装备与车辆工程》2009,(12):46-48
本文根据火车锻造/焊接钩尾框在试验室获得成功的双面焊接成型工艺,以批量生产锻造/焊接钩尾框的自动控制焊接设备为研究对象,研究设计锻造/焊接钩尾框自动焊接机的机械系统和电气控制系统. 相似文献
3.
《农业装备与车辆工程》2015,(12)
介绍了卧式罐体自动焊接机的结构组成、设计的主要特点、工作原理以及操作流程,以期提高大型储罐自动焊的外观成型和焊接内在质量,提高焊接施工效率和经济效益。 相似文献
4.
郭鹏飞!浙江省余杭市临平镇信箱分箱 《农村电工》1996,(10)
1 故障现象 某单位一台链条自动焊接机,其工作原理跟一般常用的单相380V调功器相似、由控制器产生触发信号,去控制功率单元可控硅的耐导通角,最终达到控制链环的焊接温度.此机床在半年前开始出现焊接温度不稳的故障现象.其间曾多次检修过,均未找出故障原因. 相似文献
5.
科学技术的不断进步,推动了工程机械行业的发展,其中焊接机器人的产生以及应用,大大提升了工程机械行业的生产技术水平,同时也提高了工程机械生产中焊接工作的智能化水平,使得生产质量及效率得以提升,工作量也有所减少.焊接本身就是工程机械制造生产中的重要技术环节,在人工焊接的模式中,容易产生一些安全隐患以及质量问题,若是将焊接机... 相似文献
6.
为改善蜂窝板式换热器机械强度,提高蜂窝板冲压成型极限,对板片焊接极限粘结力和冲压破裂极限强度的主要影响因素:焊点形状、焊接功率、焊接速度、焊接点距和焊点分布形式进行了优化,利用数控激光焊接机、拉力试验台和水压泵等试验设备,进行了单因素和多因素焊接薄板机械强度测试试验。单因素试验结果表明:相同工况下,螺旋焊点的薄板极限机械强度最大,表现为随焊接功率、焊接速度的增大,焊点极限机械强度先增加后减小;等边三角形焊点分布薄板冲压破裂的极限压强较大,随焊点距离增大迅速减小。正交试验表明:在螺旋焊点和等边三角形焊点分布下,焊接点距为50 mm、焊接功率为2.2 k W、焊接速度为2.5 m/min时,薄板冲压成型破裂极限最大,为8.6 MPa。较现有焊接工艺的冲压成型极限提升了7.5%。 相似文献
7.
8.
9.
10.
11.
12.
感官检验棉花的品级,这是农村常见的一种检测手段.它的一个主要特点就是存在不确定性.这是由于检验员的品级检验水平存在一定的差异,其中有很多因素制约着检验的结果.文章对影响感官检验结果的因素进行了系统的分析. 相似文献
13.
14.
15.
16.
《Journal of Agricultural Engineering Research》1998,69(3):249-254
A model to represent the discolouration of dried powder of carrots as a function of temperature was developed. Two types of carrots, Asian and European, containing large amount of lycopene and β-carotene, respectively, were tested. The dried powder was stored under an atmosphere with O2and at three different temperatures, 5,20 and 35°C. The surface colour of the powder was monitored during storage by a Hunter colour ratioa/b. In the proposed model, the rate of oxidation was assumed to be represented by the product of the fraction of concentration of oxidized pigment at arbitrary time and a specific rate of oxidation of pigment. The rate parameters in the proposed model were calculated by fitting the experimental data with smooth curves by trial and error at the end of the induction period but before discolouration took place. The frequency constant and activation energy, expressing the temperature dependence of the rate parameters, were expressed by the Arrhenius relation. The simulation results of a Hunter colour ratioa/bof dried powder at 25°C showed good agreement with the experimental data, suggesting that the proposed model was effective for the prediction of discolouration of dried powder of both types of carrot. The use of the induction period in the manner described may enable the shelf life of dried powder to be predicted. 相似文献
17.
18.
从灾害经济学的角度探讨了城镇供水优化调度的必要性和可能性,认为在缺水不可避免的情况下,对供水进行优化调度可以减小缺水带来的损失,产生较好的减灾效益,特别是可以大大减小严重干旱的灾害效应。并根据水资源的特性,提出了缺水损失的计算模式以及优化调度的原则和方法。 相似文献
19.