首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Upon UV irradiation wool fabrics can be photografted with photoactive acrylamido dyes at room temperature without photoinitiaors, which is eco-friendly coloration process compared with conventional adsorption-based dyeing. Acrylamide addition as a comonomer can improve the photografting probably by reducing the steric hindrance between the bulky dyes during the photocopolymerization. Even without photointiators and neutral salts, the optimal K/S values of the photografted wool reached upto 18.7 and 18.5 for Reactive Red 84 and Yellow 39 dyes respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm2 was irradiated on the padded fabrics with 6.3 %owf dye containing 0.65 mole ratio of acrylamide to the dyes. Furthermore, the color fastness of the grafted fabrics was as good as those of conventionally dyed fabrics due to the copolymerization of dyes and comonomers.  相似文献   

2.
Dyeing characteristics and fastness of 100 % m-aramid fiber with some commercial dyes were investigated on various dyeing conditions, such as using a swelling agent and electrolyte as auxiliaries. Among commercial dyes used, the basic dyes showed comparatively higher exhaustion yield comparing to those of disperse dyes and acid dyes. Under acidic conditions in the range pH 3 to 5, preferably between pH 3 and 4, the stability of cationic dyes could be enhanced leading to higher adsorption. Dye exhaustions of trichromatic dyes were increased proportionally to concentration of swelling agents ranging from 1 to 4 g/l. The addition of electrolyte provided increased K/S values after washing process compared with those of blank dyeings, where the greatest effect was observed with NaNO3.  相似文献   

3.
Reducing the number of host-vector interactions is an effective way to reduce the spread of vector-borne diseases. Repellents are widely used to protect humans from a variety of protozoans, viruses, and nematodes. DEET (N,N-Diethyl-meta-toluamide), a safe and effective repellent, was developed during World War II. Fear of possible side effects of DEET has created a large market for “natural” DEET-free repellents with a variety of active ingredients. We present a comparative study on the efficacy of eight commercially available products, two fragrances, and a vitamin B patch. The products were tested using a human hand as attractant in a Y-tube olfactometer setup with Aedes aegypti (Linnaeus) and Aedes albopictus (Skuse), both major human disease vectors. We found that Ae. albopictus were generally less attracted to the test subject’s hand compared with Ae, aegypti. Repellents with DEET as active ingredient had a prominent repellency effect over longer times and on both species. Repellents containing p-menthane-3,8-diol produced comparable results but for shorter time periods. Some of the DEET-free products containing citronella or geraniol did not have any significant repellency effect. Interestingly, the perfume we tested had a modest repellency effect early after application, and the vitamin B patch had no effect on either species. This study shows that the different active ingredients in commercially available mosquito repellent products are not equivalent in terms of duration and strength of repellency. Our results suggest that products containing DEET or p-menthane-3,8-diol have long-lasting repellent effects and therefore provide good protection from mosquito-borne diseases.  相似文献   

4.
Formulations of acrylamido dyes containing comonomers can be photografted onto cotton fabric upon UV irradiation at room temperature without neutral salts, which makes it a novel coloration process of excellent environmental friendliness. The photografting of the dyes can be assisted by the copolymerization of the acrylamide comonomer which may reduce the steric hindrance of the bulky dyes. About 90 % of the dyes and 94 % of the acrylamide are photopolymerized in the solution and the degree of polymerization is estimated to be 13.2 according to 1H-NMR and MALDI-TOF mass analyses. The optimal K/S values of the grafted cotton fabrics showed 13.3 and 12.3 for red and yellow dyes, respectively. The optimal UV-grafting coloration can be achieved when a UV energy of 25 J/cm2 was irradiated on the padded fabrics with a formulation of 0.65 mole ratio of acrylamide to the dyes, 7 wt% acetophenone photoinitiator (Irgacure 2959) based on the dye weight under pH 6. Furthermore, the color fastness properties of the grafted fabric were superior to those of conventional reactive dyeing of the dyes due to higher molecular weight of the polymerized dyes.  相似文献   

5.
Azo disperse dyes (D1-D13) were prepared by various diazotized aryl amines coupled with N-(phenyl)-2-[(4-phenyl-1,3-thiazol-2-yl)amino] acetamide. All the azo disperse dyes have been characterized by their percentage yield, UV-VIS spectroscopy, elemental analysis, IR spectroscopy, 1H-NMR spectroscopy, and dyeing performance on polyester fiber. These dyes were applied to polyester fabric by HTHP method and their fastness properties were evaluated. All the dyes gave moderate to excellent fastness properties on polyester fiber. The main focus was to synthesize azo disperse dyes that give good dyeing property along with pharmacological activity. Therefore, the synthesized compounds were examined for their antimicrobial activity at various concentrations using well-known Kirby-Bauer disk diffusion method.  相似文献   

6.
Mosquitoes are the most deadly vectors of parasites that cause diseases such as malaria, yellow fever, and filariasis. In view of the recent increased interest in developing plant origin insecticides as an alternative to chemical insecticides, the objective of this study was to determine the repellent activity of creams formulated with methanol crude extract (MCE), hexane fraction (HF), and ethyl acetate fractions (EAFs) of Ocimum gratissimum and Lantana camara leaves in single and combined actions against female Aedes aegypti. Evaluation was carried out in the net cages (30 by 30 by 30 cm) containing 60 blood-starved female mosquitoes each and were assayed in the laboratory condition following World Health Organization 2009 protocol. All formulations (single and mixture) were applied at 2, 4, 6, and 8 mg/cm2 in the exposed area of human hands. Only acetone + white soft paraffin served as negative control and odomos (12% DEET) as positive control. All the formulations presented good protection against mosquito bites without any allergic reaction by the human volunteers. The repellent activity was dependent on the strength of the extracts and fractions. Among the tested formulations, the maximum protection time was observed in MCE (120 min) and EAF (150 min) of O. gratissimum; MCE:MCE (150 min) and HF:HF (120 min) mixtures of both plants. In addition, MCE:MCE and HF:HF mixtures from both plants showed possible synergistic effect. From the results, the combination of O. gratissimum and L. camara to formulate natural mosquito repellent using small amount of extracts can be encouraging to be an alternative to conventional DEET.  相似文献   

7.
Treatment of polyacrylonitrile (PAN) onto m-aramid fabric was carried out by pad-dry-cure method using dimethylformamide (DMF) dissolved acrylic fiber solution. The obtained PAN treated m-aramid fabric was dyed using exhaustion method with basic dyes. The effect of PAN treatment on fabric stiffness property was acceptable with acrylic fiber solutions ranging from 1 wt% to 4 wt%. Whilst, more than 4 wt% PAN treated fabrics exhibited undesirable stiffness. The dyeing results showed that PAN treated m-aramid fabrics exhibited a significant increase in color strength when compared to untreated fabric, arising from an increase in anionic dye sites (styrene SO3 ? group). Wash fastness was comparable to that of untreated fabric, indicating the strong interaction between dye molecules and the PAN. Rubbing fastness of treated fabrics was not affected by treatments with PAN concentrations lower than 4 wt%. Further increase in PAN concentration led to poorer rubbing fastness property due to the problem of surface dyeing. For light fastness, the PAN treatment failed to improve the light fastness property which is the main disadvantage of basic dyeing of aramid fabric. Finally, in case of PAN treatments with the range of 1 wt% to 4 wt%, the flame retardancy property of PAN treated m-aramid fabrics was found not affected by the percent add-on. However, above 4 wt% PAN treatment, the flame retardancy performance became deteriorated.  相似文献   

8.
Reactive dyes are used widely in cotton dyeing process. Reactive dyeing uses high amounts of inorganic salts to accelerate dye exhaustion. These salts are then discharged to the effluent, leading to serious environmental problems. Biodegradable organic salts can alternatively be used in the dyeing process. In this paper, a new liquid organic salt was synthesized by acid-base neutralization, which was used to replace inorganic salts in reactive dyeing. Dye exhaustion in organic salt dyeing was similar to the values in conventional dyeing. However, dye fixations were slightly lower in organic salt dyeing than in conventional dyeing. The washing fastness of dyed fabrics with organic salt was excellent. Experimental results showed that dye exhaustion reached the maximum value when the concentration range of organic salt was from 20 g/l to 40 g/l. In addition, the optimal alkali concentration in organic salt dyeing was found to be about 30 g/l. These parameters suggested organic salt could replace inorganic salt in reactive dyeing process.  相似文献   

9.
Copper (II) salts are used as metallizing agents in the synthesis of new non-genotoxic direct dyes for cotton. Specifically, cotton fabric is dyed with non-genotoxic disazo direct dyes and then treated with copper salts. The complexes are characterized by neutron activation analysis, absorption spectrometry and standard Salmonella mammalian mutagenicity assay, and the after-treated fabrics are evaluated for lightfastness and washfastness. Direct dyes possessingortho-propoxy andortho’-hydroxy substituted systems formed the corresponding nonmutagenic 1:2 dye:metal complex and undergo significant improvement in lightfastness following metallization.  相似文献   

10.
Two novel cationic softener containing mono-s-chloro triazinyl reactive dyes together with their analogues were designed. The dyes were synthesized via reacting an N,N-dimethyldodecylamine with p-nitrobenzyl bromide. The resultant was reduced using stannous chloride and hydrochloric acid to produce the primary amine. The quaternary ammonium salt containing primary amine was then diazotized to produce diazonium salt part of azo dye. The diazonium salt was then coupled to H-acid/J-acid reacted with cyanuric chloride and sulfanilic acid. The analogue dyes were prepared via the same route without quaternary ammonium salt making stage. The chemical structures of the novel dyes were characterized by FTIR, 1H-NMR, and elemental analysis. The spectroscopic properties of the dyes were determined in terms of λ max and ? max in aqueous solution.  相似文献   

11.
A series of new azomethine dyes based on pyrazolone system have been synthesized via different routes. The solvatochromism for the dyes was evaluated with respect to spectroscopic properties in various solvents. The dyes were applied as disperse dyes on polyester fabrics and gave shade poor to excellent light fastness, washing, perspiration, sublimation, and rubbing fastness properties. Also the position of color in CIELAB coordinates (L*, a*, b*) and K/S value were investigated.  相似文献   

12.
This research work involves the dyeing of wool with indicaxanthin, a natural dye extracted from fruits of Opuntia ficus-indica. The optimal conditions for dye extraction were to mix 50 g of Juice from cactus pears with 100 mL of 80% aqueous ethanol as solvent for dye extraction. Liquid chromatography was applied for the separation. Two main dyes were obtained, which were identified as indicaxanthin (75 mg per 50 g) and betanin (5 mg per 50 g). The effect of dye bath pH, salt concentration, dyeing time and temperature were studied. The optimal conditions for wool dyeing with indicaxanthin dye were carried out at 70 °C for 90 min with the pre-treatment of various metal salts as mordant. The colour yields of the dye on the wool were found to be highly dependent of the pH, optimum results being obtained at pH 4. The K/S of wool increased in the order of the dyeing using KAl (SO4)2 > MnSO4 > CoSO4 > FeSO4 > none > ZnSO4 > CuSO4. Un-mordanted samples have good properties of water and washing fastness. Mordants KAl (SO4)2 and CoSO4 were found to give good light fastness (rating 5).  相似文献   

13.
In this study, natural dyes were extracted from five plants, namely diospyros kaki, dioscorea cirrhosa, millettia (jixueteng), ecliptae, and macrocarpa nucuma, using environmentally-friendly solvents, including ethanol and deionized (DI) water. A plant mordant, tannin extracted from Emblica officinalis G., and a metal mordant, copper sulfate, were used in the pre-dyeing process. Cotton and silk fabric samples were treated using the five natural dyes without and with mordanting for comparison on their color strength and characteristics as well as protection against ultraviolet radiation (UVR). Results revealed that Emblica officinalis G. had the highest total phenol content, followed by dioscorea cirrhosa. The presence of abundant phenolic groups in the natural dyes and mordant makes them effective coloration agents for fabrics. Cotton and silk fabrics dyed using ecliptae without pre-mordanting had the highest K/S values. Silk fabrics had higher K/S values than cotton fabrics, indicating greater color strength in pre-mordanted silk treated with DI water-extracted dyes. Natural mordant used before treatment with natural dyes contribute to significant enhancement in color strength, and Emblica officinalis G. alone could darken the color of cotton and silk fabrics dyed with plant pigment. Moreover, treatment with natural dyes after mordanting can increase ultraviolet protection factor (UPF) and the enhancement in UVR protection is greater and more significant in cotton fabrics than in silk fabrics, and in fabrics treated with DI water-extracted natural dyes than in those treated with ethanol-extracted ones. In conclusion, pre-dyeing with natural mordant followed by treatment with natural dyes extracted using environmentally-friendly solvents can enhance significantly K/S and UPF, offering directions for manufacturing textiles without environmental hazards but with good appearance and health benefits.  相似文献   

14.
A greenhouse study was conducted to determine the effects of waters differing in salt composition on growth and selenium (Se) accumulation by lesquerella (Lesquerella fendleri Gray S. Wats.). Plants were established by direct seeding into sand cultures and irrigated with solutions containing either (a) Cl as the dominant anion or (b) a mixture of salts of SO42− and Cl. Four treatments of each salinity type were imposed. Electrical conductivities of the irrigation waters were 1.7, 4, 8, and 13 dS m−1. Two months after salinization, Se (l mg l−1, 12.7 μM) was added to all solutions as Na2SeO4. Shoot growth was significantly reduced by increasing Cl-salinity. Regardless of salinity type, concentrations of Ca2+, Mg2+, Cl, total-S, and Se were higher in the leaves than the stems, whereas K+ and Na+ were higher in the stem. Leaf-Se concentrations were not significantly affected by Cl-based irrigation waters, averaging 503 mg Se kg−1 dry wt across salinity levels, whereas leaf-Se decreased consistently and significantly from 218 to 13 mg kg−1 as mixed salt salinity increased. The dramatic reduction in Se was attributed to SO42−:SeO42− competition during plant uptake. The strong Se-accumulating ability of lesquerella suggests that the crop should be further evaluated as a potentially valuable phytoremediator of Se-contaminated soils and waters of low to moderate salinity in areas where the dominant anion in the substrate is Cl.  相似文献   

15.
Two new fluorescent pteridine alkaloids, tedaniophorbasins A (1) and B (2), together with the known alkaloid N-methyltryptamine, were isolated, through application of mass directed purification, from the sponge Tedaniophorbas ceratosis collected from northern New South Wales, Australia. The structures of tedaniophorbasins A and B were deduced from the analysis of 1D/2D NMR and MS data and through application of 13C NMR DFT calculations. Tedaniophorbasin A possesses a novel 2-imino-1,3-dimethyl-2,3,7,8-tetrahydro-1H-[1,4]thiazino[3,2-g]pteridin-4(6H)-one skeleton, while tedaniophorbasin B is its 2-oxo derivative. The compounds show significant Stokes shifts (~14,000 cm−1) between excitation and emission wavelengths in their fluorescence spectra. The new compounds were tested for bioactivity against chloroquine-sensitive and chloroquine-resistant strains of the malaria parasite Plasmodium falciparum, breast and pancreatic cancer cell lines, and the protozoan parasite Trypanosoma brucei brucei but were inactive against all targets at 40 µM.  相似文献   

16.
In this paper, soy meal hull activated carbon (SMHAC) and titania nanoparticle (TiO2) were used as catalysts to degrade dyes. Activated carbon was prepared using soy meal hull. Degradation of dyes using single and binary catalyst systems was studied. Textile dyes were used as model pollutants. Photocatalytic dye degradation and mineralization were studied using UV-Vis spectrophotometer and ion chromatography (IC). The effects of pH, initial dye concentration, and salt on dye degradation were investigated. Dye solutions were decolorized completely (100 %). The presence of salts decreased dye degradation rate. Degradation of dyes followed first order kinetics model. Formate, acetate, and oxalate were detected as dominant aliphatic intermediates during dye degradation process. Nitrate, sulfate, and chloride anions were detected as dye mineralization products.  相似文献   

17.
18.
The green belly stink bug, Dichelops furcatus (F.) (Hemiptera: Heteroptera: Pentatomidae) is a pest of corn and soybean in southern Brazil. It also occurs on wheat, but information on its damage to this crop is limited. To determine the need for sustainable IPM programs, the impact of this bug on wheat production should be determined. Studies were conducted in the screenhouse with 1, 2 and 4 bugs caged for 16 days on single plants, cv. ‘BRS Parrudo’. During the vegetative period (plants ca. 25 cm tall), all infestation levels significantly reduced plant height and ear head length, but did not reduce grain yield. Feeding damage caused tissue necrosis on leaves. During the booting stage, grain yield was significantly reduced with 2 and 4 bugs per plant; ear heads were small, discolored and abnormally developed. In 2013 and 2014 field trials, plants were infested for 18 days with 2, 4 and 8 bugs per m2 at vegetative, booting, and milky grain stage. At these infestation levels, there was no significant reduction in grain yield. There was a significant decrease in the number of normal seedlings resulting from seeds exposed to 8 bugs per m2 at the milky grain stage. Results suggest that, in general, there is no need to control D. furcatus on wheat, unless numbers are ≥8 bugs per m2 during reproductive period.  相似文献   

19.
Development of water-soluble dyes for the dyeing of different textile fabrics is essential for the textile industry due to ecological and economical reasons. In this study, a series of new azoic dyes were prepared by diazotization reaction between the phenyl boronic acid and different aniline derivatives, and their dyeing capacity in aqueous solution was evaluated. The synthesized boronic azo dyes present good water solubility and can dye polyamide (nylon), wool, silk, and cellulose acetate fabrics. The effect of factors such as concentration of dye, dyeing temperature, and pH on the level of color strength (K/S) was studied. The dyeing results showed that higher color strength K/S (about 16) and fastness properties (about 4/5) with boronic acid dyes were achieved at higher temperatures avoiding the use of surface agents, mordants, and other polluting chemical additives.  相似文献   

20.
Due to compact structure of meta-aramid fiber caused by the intermolecular hydrogen bondings of amide groups, the degree of crystallinity increased, thus its poor dyeing properties arises. Among commercial dyes used in many previous researches, the basic dyes showed comparatively higher exhaustion yields as comparing to those of disperse dyes and acid dyes. The anthraquinone moiety was adopted for good performances of light fastness on meta-aramid fiber. In this study, eight of anthraquinone dye was synthesized. The three of them were obtained from chloro-anthraquinone, by Ullmann reactions with the corresponding heterocylic residues such as morpholine and one of them was obtained from lueco quinizarine by condensation with the corresponding heterocylic residues. The others were prepared by quaternization from dyes above. The synthesized disperse and cationic dyes were dyed on meta-aramid fibers and investigated for their build-up dyeing properties and wash fastness.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号