首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The black‐lipped pearl oyster, Pinctada margaritifera, is the most important farmed species in French Polynesia and the basis of the most valuable export industry. Mass production of black pearls relies on a surgical operation requiring tissue from a donor pearl oyster to be grafted, together with a nucleus made of shell, into the gonad of a recipient oyster. Improving pearl size through family selection remains one of the main challenges for future aquaculture development. This study analyses the relative contribution of donor and recipient oysters to pearl size. To this end, hatchery‐produced donor oysters of two batches, large and small (based on shell height), were used to supply grafts for recipients, which were then monitored individually for their growth performance by recording shell height, width, and thickness, and total live weight (flesh + shells) every 6 months (four biometric measurement times) over 20 months of culture. Pearls issued from the two batches of donors showed no significant differences in nacre weight or thickness. In contrast, recipient oyster shell height and total weight were increasingly positively correlated with these pearl size parameters over the culture period, becoming significant at 8 months post‐grafting. Potential therefore exists to use shell height and oyster weight as phenotypic indicators for selective breeding of recipient oysters with high growth performance to increase pearl size in P. margaritifera.  相似文献   

2.
Round nucleated pearls are produced through a surgical operation, where a round nucleus and a mantle tissue ‘saibo’ from donor oyster are inserted into the gonad of the host oyster. The epithelial cells in the mantle tissue proliferate around the nucleus, and thus, the pearl sac is formed. Pearl sac secrets nacre and forms a pearl. The quality and economic value of pearls are assessed by pearl features such as colour, brightness, lustre and shape. Among all these features, colour has been reported as an important economic indicator and has been widely studied by researchers. Generally, pearl colour is affected by the donor oyster which is determined genetically and biological pigments (melanin and carotenoid). Organic matrices, metal ions and other factors have also been reported to influence the colour of a cultured pearl. Recently, multi‐omics methods have been used to study the colour formation of pearl, and some key genes and signal pathways related to the colour formation of pearls have been identified. Nevertheless, the specific mechanism of pearl formation needs further research. The review combines both fresh and sea water pearls focusing on Hyriopsis cumingii and pearl oysters to provide a general overview and understanding for pearl colour formation.  相似文献   

3.
Pinctada margaritifera is an economically important marine bivalve species for cultured pearl production in French Polynesian aquaculture. In order to evaluate the influence of donor oyster age on pearl quality traits, experiments were conducted over 6 years using both grafts and surgreffe operations. At harvest, six pearl quality traits were recorded and compared: surface defects, lustre, grade, darkness level and visual colour. Analysing the quality traits of pearls harvested in the initial graft process and those of pearls obtained from surgreffe experiments allowed a comparison of the influence of pearl sac cells originating from the initial mantle graft, which aged together with their recipient oysters. The results demonstrated a significant decrease between these successive grafts in lustre, grade (A‐B‐C), darkness level, and green colour – traits that are of major importance in the pearl market. The duplicated graft experiment allowed the comparison of donor oyster families at 2 and 5 years old, where a mantle graft was inserted into recipient oysters aged 2.5 years. The results showed the same tendencies to a lesser extent, with (i) an improved pearl grade, predominantly through a most important rate of 0 surface defect category, and (ii) a green/grey ratio in favour of the younger donor. A comparison between the graft‐surgreffe and the duplicated graft experiments also highlighted: (i) the indirect role played by the younger recipient oysters, which must be optimized for optimal pearl quality realization, and (ii) the complex interplay between the donor and recipient oysters.  相似文献   

4.
Understanding the respective roles played by donor and recipient pearl oysters in pearl quality determination in relation to the environment is a challenge for the pearl industry. In most Pinctada species, pearl size is mainly related to recipient oyster growth performance but also relies to some extent on the biomineralisation activity of the pearl sac, a tissue that originates from the donor oyster mantle. We examined donor effect on pearl size in response to culture in the lagoons on Arutua and Apataki atolls. Overall, nacre weight and thickness were greater in Arutua than in Apataki, but sensitivity to the environment differed between donors. Some donors were associated with significantly heavier and thicker nacre in Arutua (I group), while others had similar results at the two sites (NI group). On average, up to 20% of the pearl size could be attributed to the donor but, in group I, donor effect was responsible for up to 36% of nacre weight determination. Additionally, a real‐time PCR expression study of eight matrix protein genes related to biomineralisation in the pearl sac showed that MSI60, pearlin and pif177 were significantly and positively correlated with nacre weight and thickness, with the latter two genes explaining the larger pearl size observed in Arutua. Donor oysters in P. margaritifera therefore play a key role in pearl size improvement, related to the role of the shell matrix protein genes. Understanding such contributions could help in the design of genetic selection plans for specific and adapted donor oyster lines.  相似文献   

5.
The black‐lipped pearl oyster, Pinctada margaritifera, is the most important farmed mollusc species in French Polynesia. Donor oyster selection among wild P. margaritifera individuals, chosen according to their inner shell colour, makes it possible to obtain the broadest range of cultured pearl colours of any species. This study demonstrates the relative influence of using black [B] or red [R] outer shell phenotypes, combined with green [G] or yellow [Y] inner shell phenotypes, on pearl darkness level, colour categories and lustre. A large scale grafting experiment was designed and carried out over five grow‐out locations, covering three archipelagos: Tuamotus, Society and Gambier. Results revealed that the [B + G] phenotypes may be used as donors to produce dark green pearl, which suit the demands of the Asian market; whereas, phenotypes incorporating [R] and/or [Y] phenotypes may be used to obtain multicolour pearls of medium/light darkness, which suit the demands of the European market. From an environmental point of view, the 1) [B] phenotype showed no significant variation for light and other pearl colour production, and 2) [Y] phenotype produced both the same rate of pearl darkness level and green colour pearls whatever the grow‐out location. A classification tree model was built to predict, according to shell phenotype and culture location, the colour and darkness level of harvested pearls. Lustre was shown to be more influenced by the environment than by phenotype. These results should be taken into account in pearl farm production management and in selective breeding programmes.  相似文献   

6.
Cultured pearls produced with Pinctada margaritifera, using the surgreffe method (implantation of a second nucleus following pearl harvest) were studied for the first time to: (1) examine family effect on nacre thickness, nacre weight and nacre deposition speed and (2) compare variation in these three traits with that obtained from the cultured pearls previously harvested after the corresponding initial grafts. A surgreffe experiment using 783 recipient oysters was realized in Rangiroa atoll (French Polynesia). After 24 months of culture, 389 cultured pearls were harvested. Significant donor family effect was found for the harvested pearl rate from surgreffe (P = 0.046). Highly significant donor family effect was recorded for nacre thickness (P = 0.004). Very highly significant donor family effects were recorded for nacre weight and nacre deposition speed (P < 0.0001). Comparison between surgreffe and initial graft showed: (1) no significant effect for the average cultured pearl rate harvested (P = 0.052) and average cultured pearl nacre deposition speed (P = 0.622) and (2) very highly significant differences (P < 0.0001) for the average cultured pearl nacre thickness and nacre weight. This study highlighted three major implications for pearl industry management: (1) donor family effect was maintained from initial graft to surgreffe, for nacre thickness, weight and deposition speed, (2) the persistence of the pearl sac metabolic activity over three years of culture and (3) the relation between harvested pearl rate and the size of the nucleus inserted in the pearl sac.  相似文献   

7.
Hyriopsis cumingii is one of the most important freshwater pearl mussels in China. Recently, this species can produce freshwater nucleated pearls of high quality. Here, we investigated whether nucleated pearl quality is influenced by the growth traits of the host mussel or other factors like cultivation period. We implanted host mussels with a spherical nucleus consisting of a small piece of mantle tissue from donor mussels. After 24 and 36 months of culture, host mussel growth traits including body weight and shell length, height, width and weight were recorded. These factors were then correlated with the quality traits of the pearls they produced, such as nacre thickness, size, weight, lustre and colour. Results indicated pearls obtained at 36 months after seeding were significantly larger in terms of nacre thickness, size and weight compared to those harvested at 24 months. In particular, nacre thickness (r = 0.33–0.48, P = 0.00), pearl size (r = 0.39–0.43, P = 0.00) and pearl weight (r = 0.35–0.47, P = 0.00) were showed to be significantly correlated with host mussels shell length, body weight and shell weight at 24 or 36 months. Larger and heavier host mussels tended to produce bigger pearls. In contrast, host mussels did not affect pearl colour. Cumulatively, our results suggest that longer culturing times and a larger host mussel may help produce better quality nucleated pearl. This information can help guide selective breeding programs designed to improve pearl quality produced by H. cumingii.  相似文献   

8.
In the present study, through a transmission experiment, the effects of europium complex and Eu3+ on the pearl colour in the pearl oyster Pinctada martensii were evaluated. Europium complex and europium salt were respectively enriched by dietary green algae platymonas subcordiformi, and their toxicity to algae were analysed by the 96‐h acute toxic experiment. Then, the green algae enriched europium complex and europium salt were respectively fed pearl oysters for 2 months, and the surface microstructures of cultured pearls were presented with scanning electron microscopy (SEM) and atomic force microscope(AFM). The results show that toxicity of europium complex to algae is much lower than Eu3+ from lowest no observable effect concentration LNOEC values and 96h‐EC50 values and two compounds can modify pearl structure and optimize pearl colour from SEM and AFM images. Taken together, our results, for the first time, show that rare earth complex can improve the pearl quality. This study provides an innovative approach for additional investigation of the influence of rare earth elements on pearls.  相似文献   

9.
  相似文献   

10.
Cultured pearl nacre deposition rate in Pinctada margaritifera oysters was studied to examine its influence on Tahitian classification grade and colour and to further our understanding of using selected donor oysters produced in a hatchery system for the improvement of these traits. A large-scale grafting experiment using 150 farmed donor oysters was realised in Rangiroa atoll (French Polynesia). After 18 months of culture, 874 pearls were harvested and 7 pearls quality traits were recorded: (1) nacre deposition rate assessed by nacre thickness and weight, (2) classification grade, lustre and surface defects, and (3) colour assessed by pearl colour darkness level and visual colour categories. Nacre deposition rate significantly influence pearl grade, surface defects, darkness level and colour categories, but not the lustre. Grade A pearls had the thickest and heaviest nacre on average, compared with grade D pearls and rejects. In addition, pearls without any surface defect had thicker and heavier nacre. Pearls with low darkness were the thinnest and the lightest. Pearls of aubergine–peacock secondary colours were the thickest and the heaviest. These results highlight the importance of rapid nacre deposition rate for increasing the production of grade A pearls, with less surface defects and dominance of a black tone colour. Fast nacre deposition may, however, have a negative impact on other pearl quality traits, such as pearl lustre. This study demonstrates the importance of examining relationships between pearl quality traits in a way that provides solid information that can be directly used for breeding and genetic selection programmes.  相似文献   

11.
The winged pearl oyster, Pteria penguin, is cultured primarily to produce half‐pearls (mabé). The mabé quality is influenced by culture techniques, but there is limited information in this field. P. penguin with mean (±SE) dorso‐ventral height of 250 ± 6.5 mm were used to investigate the influence of culture period and nucleus position on mabé quality. Oysters were relaxed using 1‐propylene phenoxetol, and five nuclei were glued at different positions to the inner surfaces of the oyster shells; three on the more concave left valve and two on the right valve. Nucleated oysters were then cultured for 10 months under commercial pearl farming conditions at Savusavu in Fiji. Nacre deposited at the base and top of the nuclei was measured monthly, from the 6th to the 10th months of culture and the different qualities of mabé produced at different positions were scrutinized. Nacre thicknesses at the base and top of the resulting mabé were significantly different at different months (P < 0.05) and the rate of nacre deposition was highest during the warmer months. The different positions of nuclei on the valve greatly affected the quality of mabé formed. After a 10‐month culture period, around 1 mm of nacre covered the nuclei although the best quality mabé were obtained after 9 months.  相似文献   

12.
合浦珠母贝全同胞家系贝壳珍珠质颜色分析   总被引：2，自引：0，他引：2  
合浦珠母贝（Pinctada fucata）小片贝的珍珠质颜色直接影响育珠贝所产珍珠的颜色。每个合浦珠母贝的珍珠质颜色都有自己的颜色特征值,即三刺激值和颜色参数。试验选择16个合浦珠母贝全同胞家系,用CSE成像分析色度系统测量并比较各家系左壳内侧外缘珍珠质颜色参数Lab和三刺激值,以筛选适合做插核小片贝的家系。珍珠质的颜色参数明度（L）为98.586～105.234,其中F16家系的明度最大,F3家系的明度最小;a（红绿色品）为-0.967～-6.577,b（黄蓝色品）为5.915～11.237,F14家系色品最偏向于绿色（-a）,F16家系色品最偏向于黄色（b）。F3和F14家系贝壳外缘珍珠质的色差（ΔEab）最大（7.885）,肉眼能明显觉察。16个家系的合浦珠母贝都属于白色系列,其中离白光中心最近（a2＋b2最小）且个体颜色集中的F1家系最适合用作小片贝来选育培养。  相似文献   

13.
  相似文献   

14.
In French Polynesia, the aquaculture of Pinctada margaritifera is carried out in numerous grow‐out sites, located over three archipelagos (Gambier, Society and Tuamotu). To evaluate the impact of macro‐geographical effects of these growing sites on pearl quality traits, five hatcheries produced families were used as homogeneous donor oysters in an experimental graft. The molluscs were then reared in two commercial locations: Tahaa Island (Society) and Rangiroa atoll (Tuamotu). At harvest, eight pearl quality traits were recorded and compared: surface defects, lustre, grade, circles, shape categories, darkness level, body and secondary colour and visual colour categories. Overall inter‐site comparison revealed that: (1) all traits were affected by grow‐out location except for lustre and round shape, and (2) a higher mean rate of valuable pearls was produced in Rangiroa. Indeed, for pearl grade, Rangiroa showed twice as many A‐B and less reject samples than Tahaa. This was related to the number of surface defects (grade component): in Rangiroa, twice as many pearls had no defects and less pearls had up to 10 defects. Concerning pearl shape, more circled and baroque pearls were found in Tahaa (+10%). For colour variation, 10% more pearls have an attractive green overtone in Rangiroa than in Tahaa, where more grey body colour were harvested. Lustre does not seem to be affected by these two culture site (except at a family scale). This is the first time P. margaritifera donor family have been shown to vary in the quality of pearls they produce depending on their grow‐out location.  相似文献   

15.
French Polynesia is renowned for the production of Tahitian black pearl. These gems are obtained by grafting a nucleus into the gonad of a receiving oyster together with a graft, i.e. a small section of mantle tissue of a donor oyster. This procedure initiates the formation of a pearl sack around the nucleus, and subsequently, the deposition of concentric layers of nacre. The nucleus plays a key‐role in pearl formation and its characteristics influence markedly the quality of the final product. As it is manufactured from mollusc shells, it contains a small percentage of organics. In the present paper, we used a set of biochemical techniques to characterize and compare the organic matrices from two types of nuclei that are currently used in French Polynesia: that from the freshwater mussel Amblema sp., and that from the pearl oyster Pinctada sp. To this end, we extracted the matrices from nuclei and performed FT‐IR, monodimensional electrophoresis, and enzyme‐linked immuno‐sorbent assay (ELISA). Our data show that the matrix associated with Amblema nuclei has a very different biochemical signature from that of Pinctada nuclei, a fact that may explain the improved tolerance of grafted oysters to nuclei of Pinctada origin. In the absence of complex physical methods of investigation, simple immunological techniques and FT‐IR performed on the extracted organic matrix are extremely reliable and effective for discriminating nuclei from these two sources. We assert that such techniques can be used as a diagnostic test to track unambiguously the biological origin of nuclei to avoid fraud.  相似文献   

16.
Production of Akoya pearls from the Southwest coast of India   总被引：1，自引：0，他引：1  
The Indian pearl oyster Pinctada fucata (Gould) is typically capable of producing pearls of 3–5 mm diameter. The feasibility of production of pearls similar to Akoya pearls of 6–8 mm diameter was studied from the southwest coast of India. Along with this, mortality and retention rates of implanted oysters, rate of nacre production, thickness of nacre deposited, quality and type of pearls produced and effect of hydrographic variations on the mortality of implanted oysters were also studied. A total of 706 oysters were implanted, 311 with 5 mm, 395 with 6 mm nuclei and stocked in 30 cages for a period of 317 days. The mortality rates were highest, 0.173 ± 0.22 for the 6 mm nucleus implanted oysters followed by 5 mm nucleus implanted oysters at 0.107 ± 0.025 during the first 30 days after implantation. These rates were significantly different (P < 0.05) from the mortality rate of the control oysters (0.042 ± 0.04). The retention rates based on the surviving oysters, ranged from 33 to 61% (average 45.9 for 5 mm) and 31 to 60% (average 48.9% for 6 mm). The nacre deposition rates on the nuclei were found to be 4.0 ± 1.0 μm day− 1 and 3.0 ± 1.0 μm day− 1 for 6 and 5 mm nuclei respectively. Of the total 131 pearls obtained, 27.6% were A-grade, 31.3% B-grade, 19.8% C-grade, 7.6% baroques and 13.7% rejects or trash. The total suspended solids (TSS) in the water were found to be positively correlated (P < 0.05) with the monthly mortality rate of the implanted oysters. The study showed that it was possible to obtain relatively thick nacre within a short period of 10 months, the deposition rate being about 9 times higher than that observed in Japanese waters and 2.2 to 2.3 times more than that along the Indian southeast coast.  相似文献   

17.
利用马氏珠母贝4个壳色系F3培育厚层优质珍珠   总被引：1，自引：1，他引：0  
符韶  谢绍河  邓岳文  梁飞龙 《水产学报》2012,36(9):1418-1424
为了评价红、金黄、白和黑壳色系F3育珠性状,设立两个实验,分别利用马氏珠母贝红、金黄、白和黑壳色系F3作为植核(受体)贝和小片(供体)贝进行植核育珠。实验Ⅰ:利用红、金黄、白和黑壳色系F3为插核贝和小片贝建立16个组合,另外利用以普通养殖群体为插核贝、金黄壳色系F3为小片贝建立了1个组合,共建立17个组合,育珠期为24个月;实验Ⅱ:分别利用红、金黄、白和黑壳色系F3为植核贝和小片贝建立16个组合,育珠期为18个月。结果表明,育珠期结束后实验Ⅰ和Ⅱ的4个壳色系F3平均壳高和成活率均存在显著性差异(P<0.05),实验Ⅰ和Ⅱ的黑壳色系F3具有最大的平均壳高,实验Ⅰ金黄壳色系F3具有最高的成活率,实验Ⅱ黑壳色系F3具有最高的成活率。实验Ⅰ:各组合间的留核率、商品珠率、优良珠率和育珠绩效均存在显著性差异(P<0.05),珍珠层厚度差异不显著(P>0.05);BW组具有最大的留核率、商品珠率、珠层厚度和育珠绩效值,RB组具有最大的优良珠率;实验Ⅱ:各组合的留核率、商品珠率、优良珠率、珍珠层厚度和育珠绩效均存在显著性差异(P<0.05)。黑壳色系F3作为插核贝具有较好的育珠效果,经进一步测试其育珠性能,可在珍珠生产中推广应用。  相似文献   

18.
In the pearl cultivation industry, the implantation of the nucleus is a critical step in the production process. The surgical insertion of the nucleus and the mantle results in a wound and stress that affect not only the survival chances of the pearl oysters but also the quality of the pearls produced. This study proposes a synthesized imidazole‐dicarboxylic acid nickel complex that may hold potential in assisting the wound healing and nacre formation processes. The acute toxicity of the complex to pearl oysters, Pinctada martensii, was examined in a dose–response study over a 90‐h exposure. The safe concentrations of the nickel complex determined using probit analysis were 0.916 mg/L and 0.471 mg/L for 72‐h and 96‐h treatments, respectively. The reliability of the regression was verified using the chi‐square test. The alkaline phosphatase (ALP) activity in different regions of the treated and control oysters, along with relevant blood biochemical indices, were measured over a 90‐d period to predict the potential effects of the nickel complex on wound healing and nacre formation. A significant increase in ALP activity in the mantle, together with elevated blood levels of Mg (II) and globulin, and reduced blood levels of Zn (II) and blood urea nitrogen were observed. These results indicate that the prepared nickel complex may hold promise in helping wound healing post mantle implantation, promote the secretion of nacre, and enhance the immunity of the oysters, thus ultimately improving the yield and quality of the pearls.  相似文献   

19.
The Australian edible oyster industry has been severely impacted by disease and declining yields since the 1970s. Selective breeding of Saccostrea glomerata is one measure addressing these problems by producing fast‐growing, disease‐resistant oysters. Farmers report that selected oysters have different growth characteristics than their wild counterparts using conventional grow‐out methods. This study investigated how different grow‐out methods influence commercially valuable oyster characteristics including shell length, shape, surface growth deformities and meat condition. In June 2015, selectively bred S. glomerata spat were deployed in two estuaries (Hawkesbury River and Georges River) in NSW, Australia, using three grow‐out methods (fixed trays, Stanway cylinders and floating baskets). In November 2015, oysters were transferred among grow‐out methods to test for the effects of changing grow‐out methods on oyster growth patterns. Oysters transferred from baskets to cylinders and from trays to cylinders had, on average, deeper and wider shells, a higher meat condition and fewer shell surface deformities than oysters in other grow‐out method combinations. However, these oysters were smaller than oysters not grown in cylinders. While there were some differences in growth patterns between the estuaries, overall it was the grow‐out methods that most influenced oyster characteristics. This was attributed to differences in the amount and magnitude of movement oysters experienced in the grow‐out methods, as recorded by motion sensors. This study demonstrates how grow‐out methods can be managed to achieve desired growth trajectories and therefore improve marketability among selective bred S. glomerata.  相似文献   

20.
Pinctada fucata martensii is an ideal animal for study of biomineralization. Although dozens of genes have been identified, the molecular mechanism of biomineralization remains still unclear. The purpose here was to discover the expression profiles of nine biomineralization genes in related tissues: mantle edge (ME), mantle centre (MC) and pearl sac (PS), and to explore the relationships between expression level and nacre thickness. The expression levels of seven genes (ACCBP, aspein, CaM, EFCBP, KRMP, nacrein and prismalin‐14) showed no significant difference between ME and MC, but were significantly higher than those in PS. The expression level of N19 was the same in ME and PS, significantly higher than that in MC. However, msi60 in ME, MC and PS showed no significant differences in expression level. In addition, the correlations of expression levels between ME, MC and PS were highly significant, indicating that there are some similar function and mechanism among the three tissues. Also the nine genes had significant correlation of expression levels between one another. Furthermore, no other genes from oysters which produced pearls of different grades showed significant difference in the expression level, except CaM in MC, which had significantly higher expression level in the medium pearl grade than in the plain nucleus grade. Moreover, the expression level of msi60 in MC of host oyster was significantly correlated with produced pearl layer thickness, suggesting that msi60 might play an important role in pearl formation and host oyster may also participate in the development of pearl.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号