首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Three experiments were conducted to examine the effects of an Aspergillus oryzae extract containing alpha-amylase activity on performance and carcass characteristics of finishing beef cattle. In Exp. 1, 120 crossbred steers were used in a randomized complete block design to evaluate the effects of roughage source (alfalfa hay vs. cottonseed hulls) and supplemental alpha-amylase at 950 dextrinizing units (DU)/kg of DM. Significant roughage source x alpha-amylase interactions (P < 0.05) were observed for performance. In steers fed cottonseed hulls, supplemental alpha-amylase increased ADG through d 28 and 112 and tended (P < 0.15) to increase ADG in all other periods. The increases in ADG were related to increased DMI and efficiency of gain during the initial 28-d period but were primarily related to increased DMI as the feeding period progressed. Supplemental alpha-amylase increased (P = 0.02) the LM area across both roughage sources. In Exp. 2, 96 crossbred heifers were used in a randomized complete block design with a 2 x 3 factorial arrangement of treatments to evaluate the effects of corn processing (dry cracked vs. high moisture) and supplemental alpha-amylase concentration (0, 580, or 1,160 DU/kg of DM). Alpha-amylase supplementation increased DMI (P = 0.05) and ADG (P = 0.03) during the initial 28 d on feed and carcass-adjusted ADG (P = 0.04) across corn processing methods. Longissimus muscle area was greatest (quadratic effect, P = 0.04), and yield grade was least (quadratic effect, P = 0.02) in heifers fed 580 DU of alpha-amylase/kg of DM across corn processing methods. In Exp. 3, 56 crossbred steers were used in a randomized complete block design to evaluate the effects of supplemental alpha-amylase (930 DU/kg of DM) on performance when DMI was restricted to yield a programmed ADG. Alpha-amylase supplementation did not affect performance when DMI was restricted. We conclude that dietary alpha-amylase supplementation of finishing beef diets may result in increased ADG through increased DMI under certain dietary conditions and that further research is warranted to explain its mode of action and interactions with dietary ingredients.  相似文献   

2.
Two experiments were conducted at two locations to determine the effects of dietary CP concentration and source on performance, carcass characteristics, and serum urea nitrogen (SUN) concentrations of finishing beef steers. British x Continental steers were blocked by BW (357 +/- 28 and 305 +/- 25 kg initial BW; n = 360 and 225; four and five pens per treatment in Exp. 1 and 2, respectively). Steam-flaked corn-based diets were arranged in a 3 x 3 factorial with three CP concentrations (11.5, 13, or 14.5% of DM) and three sources of supplemental CP (N basis): 100% urea; 50:50 blend of urea and cottonseed meal; or 100% cottonseed meal. Steers in both experiments were initially implanted with Ralgro and reimplanted with Revalor-S on d 56. Performance and carcass data were pooled across locations. Crude protein concentration x source interactions were not observed (P = 0.22 to 0.93) for performance and carcass data. Crude protein concentration affected ADG (P = 0.02) and carcass-adjusted (to a common dressing percent within location) ADG quadratically (P = 0.06). Increasing the concentration of supplemental urea linearly increased carcass-adjusted ADG and G:F (P < 0.05) and carcass-adjusted G:F (P < 0.001). Dry matter intake was not affected (P = 0.93) by either CP concentration or source. Hot carcass weight (HCW; P = 0.02), LM area (P = 0.05), and dressing percent (P = 0.03) increased linearly with increasing urea concentration, whereas increasing CP concentration quadratically affected HCW (P = 0.02), with a maximum at 13% CP. Differences in backfat thickness and yield grade were negligible across treatments. Neither marbling score nor percentage of carcasses grading USDA Choice was affected by CP concentration or source. At all times measured, SUN concentrations increased (P < 0.05) with increasing CP concentration, but effects of CP source were small and variable across time. Results indicate that increasing CP concentrations from 11.5 to 13% slightly increased ADG and carcass-adjusted ADG, whereas increasing the proportion of supplemental urea increased carcass-adjusted ADG, G:F, and carcass-adjusted G:F and increased HCW, LM area, and dressing percent. A CP concentration above 13% seemed detrimental to ADG and HCW. Serum urea N increased over time, with CP concentration having a greater effect than CP source.  相似文献   

3.
Three experiments were conducted to determine the effects of whole cottonseed or cottonseed products on performance and carcass characteristics of beef cattle. In Exp. 1, 120 beef steers (initial BW = 381 +/- 31.7 kg) were fed steam-flaked corn-based finishing diets with 10% (DM basis) basal roughage, and whole cottonseed or individual cottonseed components (cottonseed hulls, meal, and oil). Over the entire feeding period, ADG did not differ (P = 0.95), but DMI increased (P = 0.07) and G:F decreased (P = 0.06) for steers fed the cottonseed diets compared with the control diet. Dressing percent (P = 0.02) and marbling scores (P = 0.02) of carcasses from steers fed the cottonseed diets were less than for steers fed the control diet. In Exp. 2, 150 beef steers (initial BW = 364 +/- 9.9 kg) were used to determine the effects of whole cottonseed or pelleted cottonseed (PCS) on performance and carcass characteristics. Cattle were fed steam-flaked corn-based finishing diets in which whole cottonseed or PCS replaced all of the dietary roughage, supplemental fat, and supplemental natural protein of the control diet. Over the entire feeding period, steers fed the cottonseed diets had lower (P = 0.04) DMI and greater (P < 0.01) G:F than steers fed the control diet. Carcass characteristics did not differ (P = 0.16 to 0.96) among dietary treatments. In Exp. 3, 150 beef heifers (initial BW = 331 +/- 17.1 kg) were used to determine the effects of PCS or delinted, whole cottonseed (DLCS) on performance and carcass characteristics. Heifers were fed rolled corn-based finishing diets in which cottonseed replaced the dietary roughage, supplemental fat, and all or part of the supplemental natural protein of the control diet. Over the entire feeding period, ADG, DMI, and G:F of heifers fed the control diet did not differ (P = 0.19 to 0.80) from those of the cottonseed diets; however, heifers fed the diets containing PCS had greater ADG (P = 0.03) and G:F (P = 0.09) than heifers fed diets containing DLCS. Carcass characteristics of heifers fed the control diet did not differ (P > or = 0.28) from those fed the cottonseed diets. Heifers fed the diets containing PCS had greater (P < or = 0.03) HCW, dressing percent, and LM area than those fed DLCS. Based on our results, whole cottonseed, or products derived from processing whole cottonseed, can replace feedstuffs commonly used in beef cattle finishing diets with no adverse effects on animal performance or carcass characteristics.  相似文献   

4.
Crossbred steers (n = 264, 311 ± 1.6 kg initial BW) were blocked by BW, randomly assigned to one of four treatments (28 pens, 7 pens per treatment), and fed a common 90% concentrate diet to determine the effects of the severity of caloric restriction on animal performance and carcass characteristics. Treatments were 1) ad libitum access to feed for 151 d (AL100); 2) 75% of DMI by AL100 for 65 d, 95% of DMI by AL100 for 65 d, and ad libitum access to feed for 21 d (AL85); 3) 80% of DMI by AL100 for 65 d, 100% of DMI by AL100 for 65 d, and ad libitum access to feed for 21 d (AL90); and 4) 85% of DMI by AL100 for 65 d, 105% of DMI by AL100 for 65 d, and ad libitum access to feed for 21 d (AL95). Feed was offered for AL85, AL90, and AL95 based on DMI by AL100 the previous week. All steers were fed a similar quantity of DM for 4 d prior to initial, interim, and final BW determinations to minimize gastrointestinal fill differences. Overall DMI was greater (P<0.01) for AL100 than for the average of the remaining treatments and decreased linearly (P<0.01) among AL95, AL90, and AL85. Overall ADG (carcass-adjusted) was less (P<0.01) for AL85, AL90, and AL95 than for AL100, whereas overall ADG:DMI (carcass-adjusted) did not differ (P>0.10) between AL100 and the average of the remaining treatments. Overall ADG and ADG:DMI (carcass-adjusted) responded quadratically (P<0.05) with increasing DMI restriction. Hot carcass weight, longissimus area, and kidney, pelvic, and heart fat percentage were greater (P<0.05) for AL100 than for the remaining treatments and responded quadratically (P<0.10) among AL85, AL90, and AL95. Marbling score was greater (P<0.10) for AL100 than for the average of the remaining treatments, and the number of carcasses grading Prime + Choice tended to be higher (P<0.15) for AL100 and AL95. Restricting feed intake of finishing yearling steers to an average of 85 to 95% of ad libitum for 130 d of a 151-d feeding period generally resulted in slower ADG, lesser marbling scores, and carcasses that were lighter and leaner compared with yearling steers allowed ad libitum to feed and harvested after an equal number of days on feed.  相似文献   

5.
The objectives of this study were to characterize feed efficiency traits and to examine phenotypic correlations between performance and feeding behavior traits, and ultrasound measurements of carcass composition in growing bulls. Individual DMI and feeding behavior traits were measured in Angus bulls (n=341; initial BW=371.1+/-50.8 kg) fed a corn silage-based diet (ME=2.77 Mcal/kg of DM) for 84 d in trials 1 and 2 and for 70 d in trials 3 and 4 by using a GrowSafe feeding system. Meal duration (min/d) and meal frequency (events/d) were calculated for each bull from feeding behavior recorded by the GrowSafe system. Ultrasound measures of carcass 12th-rib fat thickness (BF) and LM area (LMA) were obtained at the start and end of each trial. Residual feed intake (RFIp) was computed from the linear regression of DMI on ADG and midtest BW(0.75) (metabolic BW, MBW), with trial, trial by ADG, and trial by midtest BW(0.75) as random effects (base model). Overall ADG, DMI, and RFIp were 1.44 (SD=0.29), 9.46 (SD=1.31), and 0.00 (SD=0.78) kg/d, respectively. Stepwise regression analysis revealed that inclusion of BW gain in BF and LMA in the base model increased R(2) (0.76 vs. 0.78) and accounted for 9% of the variation in DMI not explained by MBW and ADG (RFIp). Residual feed intake and carcass-adjusted residual feed intake (RFIc) were moderately correlated with DMI (0.60 and 0.55, respectively) and feed conversion ratio (FCR; 0.49 and 0.45, respectively), and strongly correlated with partial efficiency of growth (PEG; -0.84 and -0.78, respectively), but not with ADG or MBW. Gain in BF was weakly correlated with RFIp (0.30), FCR (-0.15), and PEG (-0.11), but not with RFIc. Gain in LMA was weakly correlated with RFIp (0.17) and FCR (-0.19), but not with PEG or RFIc. The Spearman rank correlation between RFIp and RFIc was high (0.91). Meal duration (0.41), head-down duration (0.38), and meal frequency (0.26) were correlated with RFIp and accounted for 35% of the variation in DMI not explained by MBW, ADG, and ultrasound traits (RFIc). These results suggest that adjusting residual feed intake for carcass composition will facilitate selection to reduce feed intake in cattle without affecting rate or composition of gain.  相似文献   

6.
Two experiments examined the effects of a saccharin-based artificial sweetener (Sucram) on health, performance, and dietary preference of feedlot cattle. In Exp. 1, 200 steer calves (initial BW = 190.4 +/- 1.47 kg) were fed a 65% concentrate diet supplemented with or without 200 mg of Sucram/kg (DM basis) during a 56-d receiving-growing period. Feeding Sucram did not affect overall (P = 0.19) DMI; however, from d 29 to 56, there was a trend (P = 0.10) for increased DMI with Sucram (5.71 vs. 6.02 kg/d, respectively). From d 0 to 28 and d 0 to 56, there were trends (P = 0.11 and 0.12, respectively) for increased ADG and for increased d-56 BW (P = 0.07) for calves fed Sucram. No differences were detected (P = 0.82) for receiving (REC) period morbidity. During the finishing (FIN) period, 180 steers from the REC period were assigned (9 pens/treatment in a 2 x 2 factorial design) to the following treatments: 1) control REC/control FIN; 2) control REC/Sucram FIN; 3) Sucram REC/control FIN; and 4) Sucram REC/ Sucram FIN. Over the FIN period, ADG tended (P = 0.12) to be greater for Sucram; however, carcass-adjusted ADG did not differ among treatments. Daily DMI was affected by a REC x FIN interaction (P = 0.08), which was the result of greater DMI by cattle in the Sucram REC/Sucram FIN treatment and decreased DMI by cattle in the Sucram REC/control FIN treatment. In general, changes in carcass characteristics were minor. In Exp. 2, 12 steers (initial BW = 395.6 +/- 6.17 kg) were used in a simultaneously replicated 3 x 3 Latin square preference test. Each square consisted of 3 pens, with 2 steers/pen, and 3 time periods. Bunks had dividers at their midpoint, and equal quantities of diet (as-fed basis) were delivered randomly on either side of the divider daily. Treatments were: 1) control; 2) Sucram = basal diet supplemented with 200 mg of Sucram/kg of DM; and 3) choice = control and Sucram on separate sides of the divider. Dietary preference differed on d 1 (P = 0.01) and d 3 (P = 0.02) for control vs. choice and Sucram vs. choice, with the choice group consuming 0.49 and 1.72 kg of DM more of the Sucram diet than the control diet, respectively. This effect, however, was not consistent across days, and average DMI did not differ (P = 0.81) among treatments. Addition of Sucram to the diet of newly received cattle tended to increase receiving period ADG; however, its effects on morbidity, finishing performance, and dietary preference were limited.  相似文献   

7.
An experiment was conducted to determine the relationship between feeding ractopamine and different amounts of MP on growth and carcass characteristics of feedlot heifers. Seventy-two crossbred heifers (475 kg of initial BW) were fed individually a diet based on steam-flaked corn for ad libitum intake for 29 d. Heifers were implanted with 140 mg of trenbolone acetate and 14 mg of estradiol-17beta 60 d before the experiment. Treatments were arranged as a 2 x 3 factorial and included 0 or 200 mg of ractopamine-HCl (23 ppm)/ d, and urea, solvent soybean meal, or expeller soybean meal (ESBM) as the predominant protein supplement. The amounts of MP supplied by the urea, solvent soybean meal, and ESBM diets were 688, 761, and 808 g/ d, respectively, calculated according to level 1 of the NRC model. Body weights were obtained 1 d before ractopamine feeding and at slaughter. Blood samples were obtained 1 d before starting the experiment and 13 d later. Ractopamine improved ADG, efficiency of gain, carcass-adjusted ADG, and carcass-adjusted efficiency of gain (P < 0.01). For ADG, heifers demonstrated a ractopamine x protein source interaction (P < 0.05); heifers not fed ractopamine had greater ADG when fed ESBM than when fed urea, whereas for heifers fed ractopamine there were no differences (P > or = 0.10) among protein supplements. This interaction was not observed for carcass-adjusted ADG (P = 0.60). Final live weights (P = 0.02) and carcass weights (P = 0.01) were greater with ractopamine feeding. Carcass marbling scores and yield grades were not affected by ractopamine or protein source (P > or = 0.39). Plasma total alpha-amino N and glucose concentrations decreased more from pretreatment concentrations when heifers were fed ractopamine (P < 0.05). Feeding ractopamine to heifers for 28 d before slaughter improved ADG and efficiency of gain without any large effects on carcass characteristics. The MP supply does not need to be increased from that provided by finishing diets based on steam-flaked corn with urea as the primary N supplement to allow the maximal response to ractopamine by finishing heifers.  相似文献   

8.
Sixty Angus-cross steers were used to compare the effects of recycled poultry bedding (RPB) stacking method and the inclusion of monensin in growing diets on performance. Steers were individually fed balanced, growing diets for a period of 84 d. The diets were control (CON), CON + monensin (CON+M), deep-stacked RPB (DS), DS+M, shallow-stacked RPB (SS), and SS+M. The CON diets contained corn, soybean meal, corn silage, and cottonseed hulls. In the RPB diets, 35% of the silage, cottonseed hulls, and soybean meal was replaced with RPB (as-fed basis). At the end of the growing period, 30 steers, representing all treatment groups, had liver biopsies for trace mineral analysis and ruminal fluid samples to assess pH, VFA, and ammonia concentrations. All steers had blood samples drawn at the end of the growing period for analysis of Se and urea N. Steers were transported 466.6 km to simulate shipping stress and started on a finishing diet for a 120-d period. Intake, ADG, and G:F were monitored throughout the trial. Steers fed CON diets had higher ADG, DMI, and G:F than SS, and higher ADG and G:F than DS (P < 0.05) during the growing period. Steers fed DS diets had higher DMI than SS (P < 0.05) during the growing period. Inclusion of monensin in the growing diets increased G:F and decreased DMI (P < 0.05). Steers from the RPB treatments started the finishing period at lighter BW than steers fed CON diets (P < 0.05). During the finishing period, steers fed SS diets had higher DMI than steers fed CON diets (P < 0.06), whereas steers fed DS diets were intermediate. At slaughter, steers fed CON diets had higher hot carcass weights and quality grades than steers fed SS diets (P < 0.07), whereas steers fed DS diets were intermediate. Results indicate that steers fed RPB consumed it better when processed by deep stacking before consumption, that carryover effects of RPB into the finishing phase were minimal, and inclusion of monensin did not affect consumption of RPB diets.  相似文献   

9.
Laboratory, digestion and growth studies were used to evaluate energy and protein supplements for ammoniated (4% of the forage DM) stargrass (Cynodon nlemfuensis Vanderyst var. nlemfuensis) hay. Ammoniation increased (P less than .05) total N concentration (.7 to .9% vs 1.7 to 2.0%) and in vitro digestion of OM, NDF and ADF and reduced (P less than .05) NDF concentration of stargrass hay. Two digestion (3 x 3 Latin square, 250-kg steers) and two growth (400-kg Brahman crossbred cull cows, eight head per pasture, two pastures per treatment, November through February) trials evaluated citrus pulp or liquid cane molasses (Trial 1) and molasses or molasses plus cottonseed meal (Trial 2) supplementation of ammoniated hay. Supplementation with byproduct energy sources, citrus pulp or molasses (either alone or with cottonseed meal), improved (P less than .05) OM digestibility but reduced (P less than .05) NDF and ADF digestibilities. Apparent nutrient digestibilities were similar (P greater than .05) between diets supplemented with citrus pulp and molasses and between diets supplemented with molasses and molasses plus cottonseed meal. In Trial 1, ADG by cull cows was greater (P less than .05) for citrus pulp- (.71 kg) or molasses-(.68 kg) supplemented diets than for hay fed alone (.49 kg). In Trial ADG was greater (P less than .05) for cull cows fed ammoniated hay supplemented with molasses plus cottonseed meal (.85 kg) than for those supplemented with molasses only (.69 kg). Feeding cows over the winter increased their (P less than .05) carcass weight, marbling score, USDA quality grade and lipid percentage of the 9-10-11 rib section compared with cows slaughtered at the beginning of the experiment.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

10.
Supplementation of vitamin E has indications for improving cattle health, performance, and retail characteristics when included in grain-based diets. This experiment was conducted to determine performance and carcass characteristics of steers fed diets containing wet distillers grains with solubles (WDGS) and supplemented with vitamin E. Steers of mixed Bos indicus and Bos taurus breeding (n = 199; BW = 363 ± 32 kg) were blocked by BW and assigned to 1 of 4 supplemental vitamin E (VITE) treatments [0 (control), 125, 250, and 500 IU·steer(-1)·d(-1)], which were fed for the last 97 d of the feeding period. Two blocks were on feed 129 d, and 3 blocks were fed for 150 d. Steers were fed a dry-rolled corn-based finishing diet with 35% WDGS (DM basis). Individual BW were measured initially, the initial day of vitamin E supplementation, and the day of slaughter. Carcass weights were collected at slaughter, and carcass data were collected after a 36-h chill. Body weight and ADG were not affected by VITE (P ≥ 0.34). There was a tendency for a linear (P = 0.08) increase in carcass-adjusted BW with increasing VITE. Use of carcass-adjusted final BW resulted in a linear increase (P = 0.04) in ADG with increasing VITE. Pre-vitamin E and vitamin E feeding period DMI were not affected (P ≥ 0.24) by VITE, but there was a tendency (P = 0.08) for a linear increase in overall DMI with increasing VITE. No difference (P ≥ 0.29) occurred in G:F measures using BW gains, but G:F using carcass-adjusted BW gains resulted in a trend (P = 0.11) for G:F to increase linearly with increasing VITE. Hot carcass weights tended (P = 0.08) to increase linearly with increasing dietary vitamin E. Vitamin E supplementation resulted in no effects (P ≥ 0.13) on measured carcass characteristics. Calculated yield grades (YG) were also not affected (P ≥ 0.37). However, the distribution of calculated YG resulted in a quadratic effect (P = 0.02) for YG 3 with the control and 500 VITE being greater than the 2 intermediate amounts. However, the percentage of carcasses grading YG 3 or less were not affected by vitamin E supplementation (P = 0.64). No differences were observed in the distribution of quality grades based on marbling scores (P ≥ 0.57). Data from this study suggest that vitamin E supplemented above basal requirements during the last 97 d of the feeding period in finishing diets containing 35% WDGS results in slight to no effect on animal performance or carcass characteristics.  相似文献   

11.
The objective of this study was to quantify the effects of zilpaterol hydrochloride (ZH) on feeding performance and fabrication yield of concentrate-finished cull cows. Three hundred twenty commercial cull cows (2 to 10 yr old) were obtained from ranches in Missouri and South Dakota and assigned to 1 of 2 treatments: 1) a control diet containing no ZH and 2) a diet that contained ZH. Cows were fed for 75, 88, or 110 d, and all received the control ration until ZH treatments were initiated. Twenty-four days before slaughter, ZH feeding began for the designated treatment pens; cows were fed ZH [8.33 mg/kg (100% DM basis)] for 20 d with a 4-d withdrawal period before slaughter. No differences (P>0.05) were detected between the 2 treatment groups for initial BW or DMI. Final BW (640.5 vs. 619.1 kg), ADG for the last 24 d (2.75 vs. 2.17 kg), and G:F for the last 24 d (0.160 vs. 0.126) were greater (P<0.01) in cows fed ZH than the control cows. No differences (P > 0.05) were found for lean or skeletal maturity score, fat thickness, LM area, HCW, or calculated yield grade among the 2 treatment groups. Feeding ZH increased (P<0.01) HCW (390.1 vs. 369.2 kg), dressed carcass yield (61.01 vs. 59.45%), and LM area (93.3 vs. 86.5 cm(2)) and decreased (P<0.01) marbling score (Slight(63) vs. Slight(86)) compared with control cows. Cows fed ZH had greater (P<0.05) primal weights for chuck (mock) tender (2.63 vs. 2.28 kg), lip-on rib eye roll (13.54 vs. 12.56 kg), top sirloin butt (12.74 vs. 11.82 kg), top (inside) round (14.58 vs. 12.89 kg), and peeled knuckle (12.87 vs. 11.51 kg) while yielding a decreased percentage of mechanical knife trimmings (1.15 vs. 1.35%; P<0.01) and more top (inside) rounds (3.71 vs. 3.46%; P=0.02) than the control cows. No differences (P>0.07) were found for the remaining fabrication yield attributes. The ZH-treated cows had greater (P<0.05) fabrication dollar values for chuck (mock) tender (8.82 vs. 7.66 $/carcass), lip-on rib eye roll (64.20 vs. 59.56 $/carcass), strip loin (0 × 1; 49.13 vs. 44.75 $/carcass), top sirloin butt (35.60 vs. 33.01 $/carcass), bottom round (flat; 44.23 vs. 39.23 $/carcass), top (inside) round (60.30 vs. 53.33 $/carcass), knuckle (peeled; 44.26 vs. 39.57 $/carcass), and total salable yield (879.50 vs. 803.70 $/carcass) than control cows. These results suggest the feeding of ZH to concentrate-finished cull cows enhances production efficiencies and can add new value to the cull cow market.  相似文献   

12.
To evaluate production and economic effects of feeding management strategy and age on intensively managed culled beef cows, a study was conducted using 125 cows of British breeding blocked by age (Young = 3 and 4 yr olds; LowMid = 5 and 6 yr olds; HighMid = 7 and 8 yr olds; and Aged = 9 yr and older) and assigned to one of three steam-flaked corn based feeding strategies. Treatments were as follows: Conservative (CSV), 30% roughage throughout; Standard (STD), decrease roughage from 30 to 10% over 20 d; and Aggressive (AGR), decrease roughage from 30 to 10% over 10 d. There were four pens per treatment in a randomized complete block design. Cows were fed for a total of 54 d, and BW was measured on d 0, 14, 28, 42, and 54. Half the cows from each pen were randomly selected and slaughtered at a commercial abattoir, and carcass data were collected. Average daily gain, daily DMI, and G:F during each weigh period and across the entire feeding period were calculated. Over the 54-d feeding period, strategies that employed more energy-dense diets numerically increased ADG (1.28, 1.63, and 1.55 +/- 0.14 kg/d for CSV, STD, and AGR; P = 0.26) and decreased DMI (11.91, 10.74, and 10.89 +/- 0.27 kg/d for CSV, STD, and AGR; P = 0.05), such that G:F was lower for CSV than for STD or AGR (0.105, 0.150, and 0.141 +/- 0.010; P = 0.05). Carcass weight was least for the CSV strategy (298 kg) and greatest for STD (328 kg); AGR resulted in intermediate carcass weight (317 +/- 6 kg; P = 0.04). Total cost of gain was over 30% greater for CSV strategy than for STD or AGR strategies (P < 0.01). In many cases, block effects (age) had a greater effect on responses than treatments. Average daily gain, DMI, and G:F decreased linearly with age (P < 0.01). Hot carcass weight, dressing percent, and fat thickness decreased linearly with age (P < 0.03); yield grade decreased and carcass maturity attributes increased linearly with age (P < 0.02). Performance and intake differences resulted in linear increases in total cost of gain (P < 0.01) and breakeven price (P = 0.03) with increasing age. These data indicate advantages to more aggressive feeding management strategies for culled beef cows, although maximal intake may be achieved with higher-roughage diets. Despite management effects, an increase in market price above purchase price may be required for intensive feeding of culled beef cows to be a profitable enterprise.  相似文献   

13.
The value of sunflower seed (SS) in finishing diets was assessed in two feeding trials. In Exp. 1, 60 yearling steers (479 +/- 45 kg) were fed five diets (n = 12). A basal diet (DM basis) of 84.5% steam-rolled barley, 9% barley silage, and 6.5% supplement was fed as is (control), with all the silage replaced (DM basis) with rolled SS, or with grain:silage mix replaced with 9% whole SS, 14% whole SS, or 14% rolled SS. Liver, diaphragm, and brisket samples were obtained from each carcass. In Exp. 2, 120 yearling steers (354 +/- 25 kg) were fed corn- or barley-based diets containing no SS, high-linoleic acid SS, or high-oleic acid SS (a 2 x 3 factorial arrangement, n = 20). Whole SS was included at 10.8% in the corn-based and 14% in the barley-based diets (DM basis). In Exp. 1, feeding whole SS linearly increased DMI (P = 0.02), ADG (P = 0.01), and G:F (P = 0.01). Regression of ME against level of whole SS indicated that SS contained 4.4 to 5.9 Mcal ME/kg. Substituting whole for rolled SS did not significantly alter DMI, ADG, or G:F (8.55 vs. 8.30 kg/d; 1.36 vs. 1.31 kg; and 0.157 vs. 0.158, respectively). Replacing the silage with rolled SS had no effect on DMI (P = 0.91) but marginally enhanced ADG (P = 0.10) and improved G:F (P = 0.01). Dressing percent increased linearly (P = 0.08) with level of SS in the diet. Feeding SS decreased (P < 0.05) levels of 16:0 and 18:3 in both diaphragm and subcutaneous fats, and increased (P = 0.05) the prevalence of 18:1, 18:2, cis-9,trans-11-CLA and trans-10,cis-12-CLA in subcutaneous fat. In Exp. 2, barley diets supplemented with high-linoleic SS decreased DMI (P = 0.02) and ADG (P = 0.007) by steers throughout the trial, whereas no decrease was noted with corn (interaction P = 0.06 for DMI and P = 0.01 for ADG). With barley, high-linoleic SS decreased final live weight (554 vs. 592 kg; P = 0.01), carcass weight (329 vs. 346 kg; P = 0.06), and dressing percent (58.5 vs. 59.4%; P = 0.04). Steers fed high-linoleic SS plus barley had less (P < 0.05) backfat than those fed other SS diets. No adverse effects of SS on liver abscess incidence or meat quality were detected. Although they provide protein and fiber useful in formulating finishing diets for cattle, and did improve performance in Exp. 1, no benefit from substituting SS for grain and roughage was detected in Exp. 2. Because of unexplained inconsistencies between the two experiments, additional research is warranted to confirm the feeding value of SS in diets for feedlot cattle.  相似文献   

14.
Twenty-eight Angus (289 +/- 3.8 kg) steers were used in a completely randomized design to evaluate the effect of isocaloric supplementation of 2 different energy sources to steers rotationally grazing tall fescue pastures for 197 d in comparison to positive and negative controls. Steers were supplemented with either corn grain (0.52% BW on a DM basis; PC) or soybean hulls plus corn oil (0.45% BW on a DM basis + 0.10% BW on an as-fed basis; PO) using Calan gates for individual intake measurement. Negative, pasture only (PA), and positive, high-concentrate control diets (85% concentrate:15% roughage on DM basis; C) were also included in the study. Steers on PC, PO, and PA treatments were managed together under a rotational grazing system, whereas C steers were fed a high-concentrate diet for the final 113 d using Calan gates. Forage DMI and apparent DM and NDF digestibility for the grazing treatments were evaluated using Cr(2)O(5) and indigestible NDF as digesta markers. Energy supplementation decreased (P = 0.02) forage DMI (% of BW) with respect to PA, but not (P = 0.58) total DMI. There were no differences (P = 0.53) among grazing treatments on apparent total DM digestibility. However, NDF digestibility was less (P < or = 0.05) in PC than in PO and PA; the latter 2 treatments did not differ (P > 0.05). Overall ADG was greater (P < 0.01) in supplemented, regardless of type, than in nonsupplemented grazing treatments. During the final 113 d, ADG was greater (P < 0.01) in C than in the grazing treatments. Overall supplement conversion did not differ (P = 0.73) between supplement types and was less (P = 0.006) than C. Carcass traits did not differ (P > 0.05) between energy sources. Dressing percentage and HCW were greater (P < 0.01) in supplemented cattle than in PA. Fat thickness and KPH percentage for PA were less (P < 0.05) than for PO but did not differ (P > 0.14) from PC. Marbling score, LM area, and quality grade did not differ (P > 0.05) between grazing treatments. Hot carcass weight for C was heavier (P < 0.001) than for pastured cattle. Quality and yield grades of C carcasses were also greater (P < 0.001) than carcasses from pastured steers. Energy supplementation, regardless of source, to grazing steers increased ADG, dressing percentage, and carcass weight compared with PA steers; however, supplemented steers had less ADG, efficiency, dressing percentage, and carcass weight compared with high-concentrate finished steers.  相似文献   

15.
These studies evaluated the effects of betaine, provided either as feed-grade betaine or as concentrated separator by-product (CSB; desugared beet molasses), on performance and carcass characteristics of finishing cattle. In Exp. 1, 175 steers (410 kg initial BW) were fed a finishing diet based on steam-flaked and dry-rolled corn, and treatments included 10.5 and 21 g/d feed-grade betaine and 250 and 500 g/d CSB (supplying 15.5 and 31 g/d of betaine, respectively). Steers fed feed-grade betaine had greater (linear and quadratic effects, P < 0.1) DMI than control steers, but ADG and gain efficiencies were not affected by treatment. Dressing percent and backfat thickness was greater (P < 0.1) for steers that received feed-grade betaine than for controls. Longissimus muscle area was lower (P < 0.1) for steers supplemented with either feed-grade betaine or CSB than for control steers. Yield grades were higher for cattle receiving feed-grade betaine (quadratic effect, P < 0.1) than for control steers. Marbling scores were not affected by supplemental betaine, but the percentage of carcasses grading USDA Select was lower (linear and quadratic effects, P < 0.1) for steers fed feed-grade betaine than for control steers, predominantly due to a greater percentage grading USDA Choice. In Exp. 2, 312 heifers (343 kg initial BW) were used in a finishing study to evaluate the effects of graded levels of feed-grade betaine and peroxide-treated feather meal on performance and carcass characteristics. Treatments included two finishing diets (containing peroxide-treated or untreated feather meal) and four levels (0, 4, 8, and 12 g/d) of feed-grade betaine arranged in a 2 x 4 factorial. No significant interactions occurred between treatment of feather meal and betaine. Treatment of feather meal with hydrogen peroxide (5% wt/wt) increased in situ protein degradability but did not alter DMI, ADG, gain efficiencies, or carcass characteristics of heifers when it replaced untreated feather meal in the diet. Top-dressing feed-grade betaine to the diets had no effect on DMI, ADG, and gain efficiencies. Marbling scores were greater (cubic effect, P < 0.05) for heifers fed diets top-dressed with 4 and 12 g/d of feed-grade betaine, but other carcass characteristics were not altered significantly. Overall, feed-grade betaine and CSB did not alter growth performance, but did have minor effects on carcass characteristics.  相似文献   

16.
Two experiments were conducted to compare ruminal, physiological, and performance responses of forage-fed cattle consuming grain-based supplements without (NF) or with the inclusion (10%; DM basis) of a rumen-protected PUFA (PF) or SFA source (SF). Supplements were offered and consumed at 0.6% of BW/animal daily (DM basis). In Exp. 1, DMI and ruminal in situ forage degradability were evaluated in 3 Angus × Hereford cows fitted with ruminal cannulas and allocated to a 3 × 3 Latin square design. Within each experimental period, hay was offered in amounts to ensure ad libitum access from d 1 to 13, DMI was recorded from d 8 to 13, and cows were limited to receive 90% of their average hay DMI (d 1 to 13) from d 14 to 21. On d 16, polyester bags containing 4 g of ground hay (DM basis) were incubated within the rumen of each cow for 0, 4, 8, 12, 24, 36, 48, 72, and 96 h. Hay and total DMI were reduced (P < 0.05) in cows receiving PF compared with cows receiving SF and NF. No treatment effects were detected (P > 0.48) for ruminal disappearance rate and effective ruminal degradability of hay DM and NDF. In Exp. 2, preconditioning DMI, ADG, carcass traits, and plasma concentrations of cortisol, fatty acids, acute-phase proteins, and proinflammatory cytokines were assessed in 72 Angus × Hereford steers receiving supplement treatments during a 28-d preconditioning period. All steers were transported to a commercial growing lot after preconditioning (d 1) and were later moved to an adjacent commercial finishing yard (d 144), where they remained until slaughter. No treatment effects were detected (P ≥ 0.52) for preconditioning ADG and G:F, but DMI tended (P = 0.09) to be reduced in steers receiving PF compared with those receiving NF and SF. Plasma PUFA concentrations were greater in steers receiving PF compared with those receiving NF and SF (P = 0.01). After transportation, concentration of tumor necrosis factor-α increased for steers receiving NF, did not change for steers receiving SF, but decreased for steers receiving PF (treatment × day interaction, P < 0.01). Steers fed PF had greater (P = 0.02) ADG compared with those fed NF during the growing phase. Carcass yield grade and marbling were greater (P < 0.05) for steers fed PF compared with those fed NF. In conclusion, PUFA supplementation did not affect ruminal forage degradability but did impair DMI in beef cows. Further, PUFA supplementation to steers during preconditioning reduced plasma concentrations of tumor necrosis factor-α after transportation, and benefited growing lot ADG and carcass marbling.  相似文献   

17.
The effects of 3 supplemental Cu concentrations on feedlot performance, mineral absorption, carcass characteristics, and ruminal S metabolism of cattle fed diets containing 60% dried distillers grains with solubles (DDGS) were evaluated in 2 experiments. Experiment 1 was conducted with 84 Angus-cross yearling steers and heifers (initial BW = 238 ± 36 kg), which were blocked by gender and allocated to 12 pens. Supplemental dietary Cu (tribasic copper chloride) treatments were: 1) 0 mg Cu/kg diet DM, 2) 100 mg Cu/kg diet DM, 3) 200 mg Cu/kg diet DM. The remainder of the diet was DDGS (60%), grass hay (10%), pelleted soy hulls (15%), and a vitamin-mineral supplement (15%). Diets were offered ad libitum throughout the finishing phase (168 d). Three cattle from each pen (n = 36) were harvested on d 168 and carcass data and liver samples were collected. Copper supplementation did not affect ADG (P = 0.22). However, the nonsignificant trend for increased ADG and decreased DMI led to a linear increase (P = 0.02) feed efficiency (G:F = 0.167, 0.177, and 0.177 for 0, 100, and 200 mg Cu/kg diet DM, respectively). The apparent absorption of Cu decreased quadratically (P = 0.07) and the apparent absorption of Mn and Zn were decreased linearly (P = 0.03 and P = 0.05, respectively) with increased Cu supplementation. Cattle supplemented with 100 or 200 mg Cu/kg diet DM had greater liver Cu concentrations (P < 0.01) than cattle that were not supplemented with Cu. There were no treatment effects (P > 0.10) on HCW, LM area, USDA yield grade, backfat, or marbling score. Experiment 2 was conducted with 6 ruminally fistulated steers that were fed the same diets as in Exp 1 in a replicated 3 × 3 Latin Square design. Copper supplementation did not affect (P > 0.10) ruminal pH or liquid S(2-) concentrations in steers consuming 60% DDGS diets (total dietary S = 0.55%). From 3 to 9 h after feeding, H(2)S gas concentration was decreased in those cattle supplemented with 100 mg Cu/kg diet. Concentration of H(2)S gas did not differ among cattle supplemented with 0 or 200 mg Cu/kg diet DM on 60% DDGS diets. Supplemental Cu improved feed efficiency in cattle consuming diets containing 60% DDGS; however, effects of Cu on rumen S metabolism were minimal even when supplemented at twice the maximum tolerable limit for beef cattle (NRC, 2000).  相似文献   

18.
An experiment was conducted to determine the efficacy of dietary betaine, CLA, or both as growth promotants and carcass modifiers in growing Iberian pigs. Twenty gilts (20 kg of BW) were individually penned and fed barley- and soybean meal-based diets (12% CP, 0.81% Lys, and 14.8 MJ of ME/kg of DM) containing either no added betaine or CLA (control), 0.5% betaine, 1% CLA, or 0.5% betaine + 1% CLA, at 95% of ad libitum energy intake. An additional group of 5 pigs was slaughtered at the beginning of the experiment to obtain the initial body composition. At 30 kg of BW, a balance experiment was conducted. At 50 kg of BW, pigs were slaughtered and viscera was removed and weighed. Betaine or CLA alone did not affect growth performance. However, betaine + CLA increased ADG (601 vs. 558 g, P = 0.03) and gain relative to ME intake (25.4 vs. 22.2 g/MJ, P = 0.03) compared with control pigs. Digestibility of nutrients and metabolizability of energy did not differ among diets (P = 0.46 to 0.75). Carcass protein, water, and lean deposition (g/d) increased (19.8, 24.2, and 23.4%, respectively, P < 0.01) in pigs fed betaine + CLA compared with control pigs. Similarly, protein deposition relative to ME intake increased by 28% in betaine + CLA-supplemented pigs (P < 0.05). Fat and mineral deposition did not differ among treatments. Carcass protein, water, and lean content (g/kg of carcass) of pigs fed betaine + CLA-supplemented diets tended to increase (P = 0.07 to 0.09) and carcass fat content tended to decrease (P = 0.09). Similarly, estimated composition of carcass gain was affected, such that water and lean content tended to increase (P = 0.06 to 0.08), whereas fat tended to decrease (P = 0.08) in pigs fed betaine + CLA-supplemented diets. Longissimus muscle area was not altered by treatments (P = 0.49). The liver of pigs fed betaine + CLA diets had increased weight (19%, P < 0.05) compared with control pigs. Overall, dietary supplementation of betaine + CLA increased ADG, protein, water, and lean deposition in growing Iberian gilts. There appears to be a synergistic action when betaine and CLA are used together.  相似文献   

19.
Effects of grain source and dietary oil supplement on dry matter intake (DMI), feeding, chewing behavior, and production performance of lactating dairy cows were evaluated using eight multiparous Holstein cows (77±22.1 days in milk; mean±SD) in a duplicated 4×4 Latin square design with a 2×2 factorial arrangement of treatments. Experimental diets contained either ground barley or ground corn supplemented with either fish oil or soybean oil at 2% of dietary dry matter (DM). Geometric mean particle size of dietary treatments was 4.1 mm. Dry matter intake tended (P=0.09) to be greater for barley- vs. corn-based diets (23.2 vs. 22.3 kg/d), but was reduced for the fish oil compared to soybean oil supplemented diets (21.1 vs. 24.3 kg/d; P<0.001). This reduction in DMI was attributed to smaller meal size (1.24 vs. 1.55 kg of DM; P=0.004) and slower eating rate (0.082 vs. 0.098 kg of DM/min; P<0.001) for fish oil compared to soybean oil supplemented diets. Main treatment effects interacted (P=0.005) for DMI of particles retained on 19 mm sieve but not for sorting index. Eating rate (0.090 kg of DM/min) was similar between barley- and corn-based diets, however, rumination time was greater for barley- compared to corn-based diets as result of longer rumination bout duration (32.5 vs. 28.5 min/bout; P=0.01). Barley- compared to corn-based diets increased total chewing time by 71 min (709 vs. 638 min) for cows fed fish oil, but not for cows fed soybean oil. Grain source did not affect milk yield or milk composition. Compared to soybean oil, fish oil negatively affected milk yield (40.4 vs. 43.4 kg/d; P=0.01), and thereby, both milk fat (0.91 vs. 1.26 kg/d; P<0.001) and protein (1.23 vs. 1.33 kg/d; P=0.007) production. However, feed efficiency (milk yield/DMI) was greater in fish oil compared to soybean oil supplemented diets (1.94 vs. 1.80; P=0.003). Results indicated that grain source and oil supplement can interact to affect feeding and chewing behavior, but not lactational performance of lactating cows.  相似文献   

20.
A feeding trial evaluated the hypothesis that wet corn gluten feed would improve growth performance of cattle fed steam-flaked corn-based finishing diets and supply required degradable intake protein (DIP). The trial used 360 steer calves (initial BW = 288 +/- 11 kg) housed in 36 pens for 166 d in an incomplete 4 x 3 factorial arrangement of treatments. Pens of steers were assigned to treatments according to a completely randomized design (four replicates per treatment combination). Treatments were wet corn gluten feed (0, 20, 30, or 40% of dietary DM) and CP (13.0, 13.7, or 14.4% of dietary DM) via supplemental urea as DIP. The 0% wet corn gluten feed treatment included only the 13.7% CP diet, and the 40% wet corn gluten feed treatment included only the 13.7 and 14.4% CP diets. Final dietary DIP concentration was 9.0% for 0% wet corn gluten feed; 8.7, 9.5, and 10.2% for 20% wet corn gluten feed; 9.0, 9.7, and 10.3% DIP for 30% wet corn gluten feed; and 10.0 and 10.6% for 40% wet corn gluten feed. Hot carcass weight, ADG, DMI, and G:F responded quadratically (P < or = 0.05) to wet corn gluten feed. The 20, 30, and 40% wet corn gluten feed treatments increased ADG by 7, 6, and 3% and increased DMI by 4, 5, and 5%, respectively, relative to the 0% wet corn gluten feed treatment. Feed efficiency was 102, 101, and 98% of the 0% wet corn gluten feed treatment for 20, 30, and 40% wet corn gluten feed, respectively. Hot carcass weight, ADG, and G:F increased linearly (P < or = 0.05) in response to increased DIP. Nonlinear analysis for DIP over the combined 20 and 30% wet corn gluten feed treatments indicated a DIP requirement of 9.6% of DM for ADG and 9.2% of DM for G:F, corresponding to 14.6 and 14.3% CP for 20% wet corn gluten feed and 14.8 and 14.5% CP for 30% wet corn gluten feed, respectively. Fat thickness, marbling, LM area, and USDA yield grade were not affected (P = 0.12 to 0.99) by wet corn gluten feed or CP. These results show that the inclusion rate of wet corn gluten feed for maximizing ADG and G:F in steam-flaked corn-based finishing diets is approximately 20% of DM. The DIP requirement determined in this trial averaged 9.4% of DM.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号