首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Crown fire occurrence and subsequent crown fire behaviour are strongly dependent on canopy fuel characteristics, especially canopy fuel load (CFL), canopy bulk density (CBD) and canopy base height (CBH). Therefore, quantification of such variables is required for the appropriate selection of silvicultural treatments aimed at reducing susceptibility to crown fire. Data from the IV Spanish National Forest Inventory and individual tree biomass dry weight equations were used to estimate the canopy fuel characteristics of four representative types of pine stands in north-western Spain. Probability of crown fire initiation and crown fire rate of spread were simulated by using the mean surface fuel load observed for each type of pine in this area and assuming different burning conditions. The results indicate that a 22.13 % of the sample plots analysed showed a rather high potential for active crown fire spread under moderate burning conditions, and this value increases to 69.27 % under extreme burning conditions. Equations relating the canopy fuel characteristics to common stand variables (stand density, basal area and dominant height) were fitted simultaneously for each pine, and weighting factors for heteroscedasticity were included. The models explained more than 93.90, 74.70 and 69.42 % of the observed variability in CFL, CBD and CBH, respectively. Basal area was the most important variable for estimating CFL and CBD while dominant height explained most of the observed variability in CBH. The use of the fitted equations together with existing dynamic growth models and fire management decision support systems will enable assessment of the crown fire potential associated with different silvicultural alternatives used in these types of pine stands.  相似文献   

2.
There is a lack of knowledge to identify and classify forest structures according to the risk of crown fires, especially in Mediterranean regions. In this study, for the first time, we use real information, obtained after a wildfire that burnt under extreme meteorological conditions, to classify forest structures of Pinus halepensis into fuel types as a function of crown fire potential. We identified fourteen forest structures which characterize many forest types in Western Mediterranean areas depending on canopy closure, number of tree layers, percent of each tree layer and overall tree density. By using the pattern of fire types that burnt the most numerous forest structures, we have identified four fire hazard groups of forest structures which are considered different fuel types. The first two had the lowest risk of active crown fires and they differed in the proportion of surface fires and passive crown fires. The third fuel type was the threshold between structures with low and high extreme fire behavior; while the fourth had a high risk of active crown fires. Firefighters and forest managers who are demanding this kind of schema, will test and upgrade this classification of fuel types in function of crown fire potential during future wildfires.  相似文献   

3.
The Angora Fire burned 1243 ha of Jeffrey pine and mixed conifer forest in the Lake Tahoe Basin between June 24 and July 2, 2007. The Angora Fire burned at unusually high severity due to heavy fuels; strong winds; warm, dry weather; and unseasonably low fuel moistures. The fire destroyed 254 homes, and final loss and suppression cost estimates of $160,000,000 make the Angora Fire one of the ten costliest wildfires in US history. The Angora Fire burned into 194 ha of fuel treatments intended to modify fire behavior and protect private and public assets in the Angora Creek watershed. The fire thus provides a unique opportunity to quantitatively assess the effects of fuel treatments on wildfire severity in an area of wildland–urban interface. We measured fire effects on vegetation in treated and adjacent untreated areas within the Angora Fire perimeter, immediately after and one year after the fire. Our measures of fire severity included tree mortality; height of bole char, crown scorch, and crown torch; and percent crown scorch and torch. Unlike most studies of fuel treatment effectiveness, our study design included replication and implicitly controlled for variation in topography and weather. Our results show that fuel treatments generally performed as designed and substantially changed fire behavior and subsequent fire effects to forest vegetation. Exceptions include two treatment units where slope steepness led to lower levels of fuels removal due to local standards for erosion prevention. Hand-piled fuels in one of these two units had also not yet been burned. Excepting these units, bole char height and fire effects to the forest canopy (measured by crown scorching and torching) were significantly lower, and tree survival significantly higher, within sampled treatments than outside them. In most cases, crown fire behavior changed to surface fire within 50 m of encountering a fuel treatment. The Angora Fire underlines the important role that properly implemented fuel treatments can play in protecting assets, reducing fire severity and increasing forest resilience.  相似文献   

4.

Context

Density management diagrams (DMDs) are useful for designing, displaying and evaluating alternative density management regimes for a given stand-level management objective. The inclusion of variables related to crown fire potential within DMDs has not previously been considered.

Aims

The aim of this study was to include isolines of variables related to crown fire initiation and spread in DMDs to enable identification of stand structures associated with different types of wildfire.

Methods

Biometric and fuel data from maritime pine (Pinus pinaster Ait.) stands in NW Spain were used to construct DMDs. Different surface and crown fire behaviour models were used together to estimate crown fire potential.

Results

The crown fire potential varied greatly throughout development of the maritime pine stands. Low stands were more prone to crowning. The type of crown fire was mainly determined by stand density.

Conclusion

The DMDs developed can be used to identify relationships between stand structure and crown fire potential, thus enabling the design of thinning schedules aimed at reducing the likelihood of crowning.  相似文献   

5.
Nomographs that calculate the threshold values of surface fire parameters which lead to crown fire initiation were created by linking two separate fire behavior models: Van Wagner’s crown fire ignition criteria and Byram’s surface fire model. The nomographs were also based on the existing surface (fuel load, fuel heat content) and canopy (foliar moisture content, live crown base height) fuel models of Aleppo (Pinus halepensis Mill.) pine forests of Mediterranean Greece. The most important fire parameters for crown fire initiation that are calculated by the nomographs are the critical flame length and the forward spread rate of the surface fire. These parameters are readily observable in the field during fires. The nomographs provide a judicious way to assess whether a crown fire is likely to occur in a conifer forest stand. Although the fire behavior models used had limited testing and are based on certain assumptions, yet they are widely applied in forestry practice worldwide, as a basis for justified fire prevention and suppression planning.  相似文献   

6.
Canopy fuel characteristics that influence the initiation and spread of crown fires were measured in representative Aleppo pine (Pinus halepensis Mill.) stands in Greece. Vertical distribution profiles of canopy fuel load, canopy base height and canopy bulk density are presented. Aleppo pine canopy fuels are characterized by low canopy base height (3.0–6.5 m), while available canopy fuel load (0.96–1.80 kg/m2) and canopy bulk density (0.09–0.22 kg/m3) values are similar to other conifers worldwide. Crown fire behavior (probability of crown fire initiation, crown fire type, rate of spread, fireline intensity and flame length) in Aleppo pine stands with various understory fuel types was simulated with the most updated crown fire models. The probability of crown fire initiation was high even under moderate burning conditions, mainly due to the low canopy base height and the heavy surface fuel load. Passive crown fires resulted mostly in uneven aged stands, while even aged stands gave high intensity active crown fires. Assessment of canopy fuel characteristics and potential crown fire behavior can be useful in fuel management and fire suppression planning.  相似文献   

7.
Prescribed fire is an important tool in the management of ponderosa pine (Pinus ponderosa Dougl. ex Laws.) forests, yet effects on bark beetle (Coleoptera: Curculionidae, Scolytinae) activity and tree mortality are poorly understood in the southwestern U.S. We compared bark beetle attacks and tree mortality between paired prescribed-burned and unburned stands at each of four sites in Arizona and New Mexico for three growing seasons after burning (2004–2006). Prescribed burns increased bark beetle attacks on ponderosa pine over the first three post-fire years from 1.5 to 13% of all trees, increased successful, lethal attacks on ponderosa pine from 0.4 to 7.6%, increased mortality of ponderosa pine from all causes from 0.6 to 8.4%, and increased mortality of all tree species with diameter at breast height >13 cm from 0.6 to 9.6%. On a per year basis, prescribed burns increased ponderosa pine mortality from 0.2% per year in unburned stands to 2.8% per year in burned stands. Mortality of ponderosa pine 3 years after burning was best described by a logistic regression model with total crown damage (crown scorch + crown consumption) and bark beetle attack rating (no, partial, or mass attack by bark beetles) as independent variables. Attacks by Dendroctonus spp. did not differ significantly over bole heights, whereas attacks by Ips spp. were greater on the upper bole compared with the lower bole. Three previously published logistic regression models of tree mortality, developed from fires in 1995–1996 in northern Arizona, were moderately successful in predicting broad patterns of tree mortality in our data. The influence of bark beetle attack rating on tree mortality was stronger for our data than for data from the 1995–1996 fires. Our results highlight canopy damage from fire as a strong and consistent predictor of post-fire mortality of ponderosa pine, and bark beetle attacks and bole char rating as less consistent predictors because of temporal variability in their relationship to mortality. The small increase in tree mortality and bark beetle attacks caused by prescribed burning should be acceptable to many forest managers and the public given the resulting reduction in surface fuel and risk of severe wildfire.  相似文献   

8.
The Mediterranean basin is a fire-prone area and is expected to continue being so according to projected climate and socioeconomic changes. Sustainable exploitation of forest biomass could have a positive effect on wildfire hazard mitigation. A modelling approach was used to compare how four different Scenarios for biomass collection for energy use affect fire behaviour and potential burnt area at landscape level under extreme meteorological conditions in a typical Mediterranean Massif. A case study of Pinus halepensis stands in Valencia (Eastern Spain) was conducted. The FARSITE simulator was used to evaluate the burnt area and fire behaviour parameters. Simulations predicted a significant increase in the burnt area and the values of most fire behaviour parameters in a Scenario of rural abandonment, relative to the current situation. Biomass management through thinning reduced canopy bulk density; however, no differences in the values of the main fire behaviour parameters were detected. Thinning and understory clearing, including biomass collection in large shrub fuel model areas, significantly reduces fire hazard. Forest biomass sustainable harvesting for energy is expected to reduce fire hazard if management includes intense modification of fuel models, comprising management of shrub biomass at the landscape level. Strong modification of forest fuel models requires intensive silvicultural treatments. Therefore, forest biomass collection for energy in the Mediterranean basin reduces fire hazard only if both tree and shrub strata are managed at landscape level.  相似文献   

9.
Due to increases in tree density and hazardous fuel loading in Sierra Nevadan forests, land management is focusing on fuel reduction treatments to moderate the risk of catastrophic fires. Fuel treatments involving mechanical and prescribed fire methods can reduce surface as well as canopy fuel loads. Mastication is a mechanical method which shreds smaller trees and brush onto the surface fuel layer. Little data exist quantifying masticated fuel beds. Despite the paucity of data on masticated fuels, land managers desire fuel loading, potential fire behavior and fire effects such as tree mortality information for masticated areas. In this study we measured fuel characteristics before and after mastication and mastication plus prescribed burn treatments in a 25-year old ponderosa pine (Pinus ponderosa C. Lawson) plantation. In addition to surface fuel characteristics and tree data collection, bulk density samples were gathered for masticated material. Regressions were created predicting masticated fuel loading from masticated fuel bed depth. Total masticated fuel load prior to fire treatment ranged from 25.9 to 42.9 Mg ha−1, and the bulk density of masticated fuel was 125 kg m−3. Mastication treatment alone showed increases in most surface fuel loadings and decreases in canopy fuel loads. Masticated treatment in conjunction with prescribed burning reduced both surface and canopy fuel loads. Detailed information on fuel structure in masticated areas will allow for better predictions of fire behavior and fire effects for fire in masticated fuel types. Understanding potential fire behavior and fire effects associated with masticated fuels will allow managers to make decisions on the possibility of mastication to create fuel breaks or enhance forest health.  相似文献   

10.
Modeling fire susceptibility in west central Alberta, Canada   总被引：1，自引：0，他引：1  
Strategic modification of forest vegetation has become increasingly popular as one of the few preemptive activities that land managers can undertake to reduce the likelihood that an area will be burned by a wildfire. Directed use of prescribed fire or harvest planning can lead to changes in the type and arrangement of forest vegetation across the landscape that, in turn, may reduce fire susceptibility across large areas. While among the few variables that fire managers can influence, fuel conditions are only one of many factors that determine fire susceptibility. Variations in weather and topography, in combination with fuels, determine which areas are more likely to burn under a given fire regime. An understanding of these combined factors is necessary to identify high fire susceptibility areas for prioritizing and evaluating strategic fuel management activities, as well as informing other fire management activities, such as community protection planning and strategic level allocation of fire suppression resources across a management area. We used repeated fire growth simulations, automated in the Burn-P3 landscape-fire simulation model, to assess spatial variations in fire susceptibility across a 2.4 million ha study area in the province of Alberta, Canada. The results were used to develop a Fire Susceptibility Index (FSI). Multivariate statistical analyses were used to identify the key factors that determine variation in FSI across the study area and to describe the spatial scale at which these variables influence fire susceptibility at a given location. A fuel management scenario was used to assess the impact of prescribed fire treatments on FSI. Results indicated that modeled fire susceptibility was strongly influenced by fuel composition, fuel arrangement, and topography. The likelihood of high or extreme FSI values at a given location was strongly associated with the percent of conifer forest within a 2-km radius, and with elevation and ignition patterns within a 5-km radius. Results indicated that prescribed fire treatments can be effective at reducing forest fire susceptibility in community protection zones and that simulation modeling is an effective means of evaluating spatial variation in landscape fire susceptibility.  相似文献   

11.
Techniques for rapid visual assessment of fuel characteristics have a broad range of applications in wildland fire management and research. We developed and tested a technique for assessing forest fuels which provides hazard ratings for distinct layers within the overall fuel complex, including bark, elevated shrubs, near-surface and surface (forest litter) fuels. These layers are comprised predominantly of fine fuel particles <6 mm diameter. The technique was used to model fuel accumulation in dry eucalypt forest of Eucalyptus marginata at two locations with contrasting understorey structures. We found that visual fuel hazard ratings described patterns of fuel dynamics over time in a similar fashion to models for fuel load accumulation. Visual hazard ratings can be related qualitatively to factors that reflect the difficulty of fire suppression by experienced fire fighters including visibility through the forest, access, difficulty of working machinery, flame height and spotting potential. The ability to relate hazard ratings to fire spread prediction needs to be tested.  相似文献   

12.
Bark beetle-caused tree mortality in conifer forests affects the quantity and quality of forest fuels and has long been assumed to increase fire hazard and potential fire behavior. In reality, bark beetles, and their effects on fuel accumulation, and subsequent fire hazard, are poorly understood. We extensively sampled fuels in three bark beetle-affected Intermountain conifer forests and compared these data to existing research on bark beetle/fuels/fire interactions within the context of the disturbance regime. Data were collected in endemic, epidemic and post-epidemic stands of Douglas-fir, lodgepole pine and Engelmann spruce. From these data, we evaluated the influence of bark beetle-caused tree mortality on various fuels characteristics over the course of a bark beetle rotation. The data showed that changes in fuels over time create periods where the potential for high intensity and/or severe fires increases or decreases. The net result of bark beetle epidemics was a substantial change in species composition and a highly altered fuels complex. Early in epidemics there is a net increase in the amount of fine surface fuels when compared to endemic stands. In post-epidemic stands large, dead, woody fuels, and live surface fuels dominate. We then discuss potential fire behavior in bark beetle-affected conifer fuels based on actual and simulated fuels data. Results indicated that for surface fires both rates of fire spread and fireline intensities were higher in the current epidemic stands than in the endemic stands. Rates of spread and fireline intensities were higher in epidemic stands due, however, to decreased vegetative sheltering and its effect on mid-flame wind speed, rather than changes in fuels. Passive crown fires were more likely in post-epidemic stands, but active crown fires were less likely due to decreased aerial fuel continuity. We also discuss the ecological effects of extreme fire behavior. Information is presented on managing forests to reduce the impact of bark beetle outbreaks and the interplay between management, bark beetle populations, fuels and fire hazard and behavior.  相似文献   

13.
  相似文献   

14.
Four treatments (control, burn-only, thin-only, and thin-and-burn) were evaluated for their effects on bark beetle-caused mortality in both the short-term (one to four years) and the long-term (seven years) in mixed-conifer forests in western Montana, USA. In addition to assessing bark beetle responses to these treatments, we also measured natural enemy landing rates and resin flow of ponderosa pine (Pinus ponderosa) the season fire treatments were implemented. All bark beetles were present at low population levels (non-outbreak) for the duration of the study. Post-treatment mortality of trees due to bark beetles was lowest in the thin-only and control units and highest in the units receiving burns. Three tree-killing bark beetle species responded positively to fire treatments: Douglas-fir beetle (Dendroctonus pseudotsugae), pine engraver (Ips pini), and western pine beetle (Dendroctonus brevicomis). Red turpentine beetle (Dendroctonus valens) responded positively to fire treatments, but never caused mortality. Three fire damage variables tested (height of crown scorch, percent circumference of the tree bole scorched, or degree of ground char) were significant factors in predicting beetle attack on trees. Douglas-fir beetle and pine engraver responded rapidly to increased availability of resources (fire-damaged trees); however, successful attacks dropped rapidly once these resources were depleted. Movement to green trees by pine engraver was not observed in plots receiving fire treatments, or in thinned plots where slash supported substantial reproduction by this beetle. The fourth tree-killing beetle present at the site, the mountain pine beetle, did not exhibit responses to any treatment. Natural enemies generally arrived at trees the same time as host bark beetles. However, the landing rates of only one, Medetera spp., was affected by treatment. This predator responded positively to thinning treatments. This insect was present in very high numbers indicating a regulatory effect on beetles, at least in the short-term, in thinned stands. Resin flow decreased from June to August. However, resin flow was significantly higher in trees in August than in June in fire treatments. Increased flow in burned trees later in the season did not affect beetle attack success. Overall, responses by beetles to treatments were short-term and limited to fire-damaged trees. Expansions into green trees did not occur. This lack of spread was likely due to a combination of high tree vigor in residual stands and low background populations of bark beetles.  相似文献   

15.
Forest thinning and prescribed fires are practices used by managers to address concerns over ecosystem degradation and severe wildland fire potential in dry forests. There is some debate, however, about treatment effectiveness in meeting management objectives as well as their ecological consequences. The purpose of this study was to assess changes to forest stand structure following thinning and prescribed fire treatments, alone and combined, in the eastern Cascade Mountains of Washington State. Treatments were applied to 12 management units, with each treatment combination replicated three times (including untreated controls). Thinning modified forest structure by reducing overall tree density by >60% and canopy bulk density by 50%, and increased canopy base height by ∼4 m, thereby reducing susceptibility to crown fire. The prescribed fire treatment, conversely, did not appreciably reduce tree density or canopy fuel loading, but was effective at increasing the density of standing dead trees, particularly when combined with thinning (37 snags/ha increase). Prescribed fire effects were more pronounced when used in combination with thinning. Thinning was more reliable for altering stand structure, but spring burning was lower in intensity and coverage than desired and may have led to results that downplay the efficacy of fire to meet forest restoration goals.  相似文献   

16.
Maritime pine (Pinus pinaster Ait.) is the tree species most affected by wildfire in the Iberian Peninsula. Prediction of the probability of fire-injured tree mortality is critical for management of burned areas, evaluation of the ecological and economic impact of wildfire and prescribed fire planning and application. Pine bark beetles (Scolytidae) frequently attack burned maritime pine stands and cause extensive post-fire mortality throughout the Iberian Peninsula. In the present study, maritime pine trees were monitored for three years following 14 wildfires in four ecotypes in Spain (11 fires in Galicia (Galician ecotype - NW Spain), one fire in Portillo (Meseta-Castellana ecotype - Central Spain), one fire in Rodenal (Rodenal ecotype - Central Spain), and one fire in Genalguacil (Sierra Bermeja ecotype - SW Spain)). Data on tree attributes, crown and bole injury, ground fire severity, Ips sp. presence and tree survival were obtained by examining 3085 trees. Logistic regression models for predicting the probability of delayed maritime pine mortality were developed by use of generalized estimated equations (GEE). An ample range of response to fire damage in mortality was evident among the four ecotypes and different models were fitted for each. The most important variables for predicting tree mortality were total crown volume damaged, presence of Ips sp. attack and cambium kill rating. The results highlight the extensive presence of Ips sp. in burned maritime pine forests and its importance in tree mortality process, the ample range of response of P. pinaster, in terms of post-fire mortality, as well as the need to develop site specific mortality models for the different ecotypes of this species following fire.  相似文献   

17.
  相似文献   

18.
Fire plays an important role in shaping many Sierran coniferous forests, but longer fire return intervals and reductions in area burned have altered forest conditions. Productive, mesic riparian forests can accumulate high stem densities and fuel loads, making them susceptible to high-severity fire. Fuels treatments applied to upland forests, however, are often excluded from riparian areas due to concerns about degrading streamside and aquatic habitat and water quality. Objectives of this study were to compare stand structure, fuel loads, and potential fire behavior between adjacent riparian and upland forests under current and reconstructed active-fire regime conditions. Current fuel loads, tree diameters, heights, and height to live crown were measured in 36 paired riparian and upland plots. Historic estimates of these metrics were reconstructed using equations derived from fuel accumulation rates, current tree data, and increment cores. Fire behavior variables were modeled using Forest Vegetation Simulator Fire/Fuels Extension.Riparian forests were significantly more fire prone under current than reconstructed conditions, with greater basal area (BA) (means are 87 vs. 29 m2/ha), stand density (635 vs. 208 stems/ha), snag volume (37 vs. 2 m3/ha), duff loads (69 vs. 3 Mg/ha), total fuel loads (93 vs. 28 Mg/ha), canopy bulk density (CBD) (0.12 vs. 0.04 kg/m3), surface flame length (0.6 vs. 0.4 m), crown flame length (0.9 vs. 0.4 m), probability of torching (0.45 vs. 0.03), predicted mortality (31% vs. 17% BA), and lower torching (20 vs. 176 km/h) and crowning indices (28 vs. 62 km/h). Upland forests were also significantly more fire prone under current than reconstructed conditions, yet changes in fuels and potential fire behavior were not as large. Under current conditions, riparian forests were significantly more fire prone than upland forests, with greater stand density (635 vs. 401 stems/ha), probability of torching (0.45 vs. 0.22), predicted mortality (31% vs. 16% BA), and lower quadratic mean diameter (46 vs. 55 cm), canopy base height (6.7 vs. 9.4 m), and frequency of fire tolerant species (13% vs. 36% BA). Reconstructed riparian and upland forests were not significantly different. Our reconstruction results suggest that historic fuels and forest structure may not have differed significantly between many riparian and upland forests, consistent with earlier research suggesting similar historic fire return intervals. Under current conditions, however, modeled severity is much greater in riparian forests, suggesting forest habitat and ecosystem function may be more severely impacted by wildfire than in upland forests.  相似文献   

19.
The study developed models for predicting the post-fire tree survival in Catalonia. The models are appropriate for forest planning purposes. Two types of models were developed: a stand-level model to predict the degree of damage caused by a forest fire, and tree-level models to predict the probability of a tree to survive a forest fire. The models were based on forest inventory and fire data. The inventory data on forest stands were obtained from the second (1989–1990) and third (2000–2001) Spanish national forest inventories, and the fire data consisted of the perimeters of forest fires larger than 20 ha that occurred in Catalonia between the 2nd and 3rd measurement of the inventory plots. The models were based on easily measurable forest characteristics, and they permit the forest manager to predict the effect of stand structure and species composition on the expected damage. According to the stand level fire damage model, the relative damage decreases when the stand basal area or mean tree diameter increases. Conversely, the relative stand damage increases when there is a large variation in tree size, when the stand is located on a steep slope, and when it is dominated by pine. According to the tree level survival models, trees in stands with a high basal area, a large mean tree size and a small variability in tree diameters have a high survival probability. Large trees in dominant positions have the highest probability of surviving a fire. Another result of the study is the exceptionally good post-fire survival ability of Pinus pinea and Quercus suber.  相似文献   

20.
Fire behavior modeling systems are important in predicting wildfire risk, fire growth, and fire effects. However, simulation software requires a new fuel modeling to include fuel treatments, prescribed fire and the transition to crown fire. The thirteen Rothermel models are insufficient in completely representing Mediterranean ecosystems. In this sense, the new American modeling includes five fuel types, requiring the acquisition of hybrid models made up of the mixture of grass and shrub and the grass or shrub mixed with litter from forest canopy. Respecting meteorological conditions and shrub characteristics, field studies have shown significant differences between American and Mediterranean models. As a consequence, the definition of new Mediterranean models requires the adjustment of specific parameters such as fuel load by category (live and dead) and particle size class (1-, 10- and 100-h time-lag), fuelbed depth and surface area-to-volume ratio. These new parameters were obtained in situ of sample itineraries, prescribed fires, and forest fires. The availability of this new modeling, validated on a field of regional scale, will facilitate preventive planning and management as well as an efficient application of suppression techniques, both ground and aerial operations, required in defending a territory against forest fires.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号