首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
Application of electrospun nanofibrous scaffolds has received immense attention in tissue engineering. Fabrication of scaffolds with appropriate electrical properties plays a key role in neural tissue engineering. Since fibers orientation in the scaffolds affects the growth and proliferation of the cells, this study aimed to prepare aligned electrospun conductive nanofibers by mixing 1 %, 10 % and 18 % (w/v) doped polyaniline (PANI) with polycaprolactone (PCL)/poly lactic-coglycolic acid (PLGA) (25/75) solution through the electrospinning process. The fibers diameter, hydrophilicity and conductivity were measured. In addition, the shape and proliferation of the nerve cells seeded on fibers were evaluated by MTT cytotoxicity assay and scanning electron microscopy. The results revealed that the conductive nanofibrous scaffolds were appropriate substrates for the attachment and proliferation of nerve cells. The electrical stimulation enhanced neurite outgrowth compared to those PLGA/PCL/PANI scaffolds that were not subjected to electrical stimulation. As polyaniline ratio increases, electric stimulation through nanofibrous PLGA/PCL/PANI scaffolds results in cell proliferation enhancement. However, a raise more than 10 % in polyaniline will result in cell toxicity. It was concluded that conductive scaffolds with appropriate ratio of PANI along with electrical stimulation have potential applications in treatment of spinal cord injuries.  相似文献   

2.
  相似文献   

3.
In this study, a three-dimensional (3D) poly(lactide-co-glycolide) (PLGA) microfibrous scaffold with high porosity (ca. 90 % porosity) was developed for evaluating its performance in tissue engineering application. A dope solution of PLGA/polyethylene oxide (PEO) blend was electrospun into a methanol coagulation bath for fabricating highly porous 3D PLGA scaffold and a salt leaching method was used for making interconnected pores of 100?C200 ??m size inside the scaffold. The morphological structure, pore size and porosity of the microfibrous scaffold were determined, and compared with twodimensional (2D) mat-type and 3D sponge-type of PLGA scaffold. Also, swelling ratio, water uptake and compressive strength were compared in order to elucidate the structure-property relationships of different types of the scaffolds, especially in a wet condition. As a result of scanning electron microscopy (SEM) observation, normal human dermal fibroblasts (nHDF) were migrated, attached, and proliferated well inside the 3D scaffold. MTT assay confirmed that the highly porous 3D PLGA microfibrous scaffold had superior cell adhesion and proliferation abilities due to fibrous structure of large specific surface area, and interconnected pore structure. Therefore, this high performance 3D PLGA scaffold can have a high potentiality for application in tissue engineering in comparison with conventional PLGA scaffolds.  相似文献   

4.
In recent decades, tremendous research has focused on the production of nanoscale fibers using synthetic polymers, with the goal of fabricating nanofibrous scaffolds for wound healing. However, the hydrophobicity of such polymers typically hinders attachment and proliferation of the cells. In this study, we combined poly-d,l-lactide-co-glycolide (PLGA) and small intestine submucosa (SIS) to fabricate blended nanofibers for wound healing by electrospinning. PLGA and SIS were dissolved in 1,1,1,3,3,3-hexafluoro isopropanol to produce different weight ratios of PLGA/SIS-blended nanofibrous membranes (NFM). Physicochemical characterization of the electrospun NFM was performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, water contact angle analysis, degradation test and tensile testing. The PLGA/SIS-blended NFM showed improved hydrophilicity and tensile strength. Better infiltration, attachment and proliferation of rat granulation fibroblasts of PLGA/SIS-blended NFMs compared to PLGA NFMs were identified by morphological differences determined by SEM and a water-soluble tetrazolium salt assay kit. Based on our results, the PLGA/SIS blended NFMs were found to be suitable for use as a potential material for wound dressing.  相似文献   

5.
Particular attention has been given to axonal outgrowth of neurons to understand how topographical surface cues influence attachment and subsequent directional migration and growth. In present study, the silk fibroin (SF) scaffold with uniaxial channels was prepared by directional freeze-drying processes. The average pore diameter, the porosity, and pore density of the scaffold are 120 µm, 88 %, and 203 mm?2, respectively. Further, hippocampal neurons were seeded onto the scaffold and the hippocampal neurons morphology was investigated. Cell-cell networks and cell-matrix interactions had been established by newly formed axons and the diversity of neurons was much higher after culturing 7 days. The neurons expressed β-III-tubulin and nerve filament, while glial fibrillary acidic protein immunofluorescence was barely above background. These results indicated that the SF scaffolds with uniaxial multichannels could be guided axons of neurons spread along the channels. SF scaffolds with oriented pores have a potential for nerve tissue regeneration.  相似文献   

6.

Background

The aim of this study was to fabricate the poly caprolactone (PCL) aligned nanofiber scaffold and to evaluate the survival, adhesion, proliferation, and differentiation of rat hair follicle stem cells (HFSC) in the graft material using electrospun PCL nanofiber scaffold for tissue engineering applications.

Methods

The bulge region of rat whisker was isolated and cultured in DMEM: nutrient mixture F-12 supplemented with epidermal growth factor. The morphological and biological features of cultured bulge cells were observed by light microscopy using immunocytochemistry methods. Electrospinning was used for production of PCL nanofiber scaffolds. Scanning electron microscopy (SEM), 3-(4, 5-di-methylthiazol- 2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay, and histology analysis were used to investigate the cell morphology, viability, attachment and infiltration of the HFSC on the PCL nanofiber scaffolds.

Results

The results of the MTT assay showed cell viability and cell proliferation of the HFSC on PCL nanofiber scaffolds. SEM microscopy images indicated that HFSC are attached, proliferated and spread on PCL nanofiber scaffolds. Also, immunocytochemical analysis showed cell infiltration and cell differentiation on the scaffolds.

Conclusion

The results of this study reveal that PCL nanofiber scaffolds are suitable for cell culture, proliferation, differentiation and attachment. Furthermore, HFSC are attached and proliferated on PCL nanofiber scaffolds.Key Words: Nanofiber, Electrospinning, Stem cells, Tissue engineering  相似文献   

7.
The PLGA ultrafine fibrous scaffold was successfully fabricated by electrospinning. The morphology and properties of the PLGA vascular scaffolds were examined. In particular, the in vitro degradation behavior of the electrospun PLGA vascular scaffolds was investigated by means of morphology, microstructure, mass loss, Mw, and breaking strength characterization. The results showed that electrospun scaffold possessed ultrafine fibrous and porous structure, and had adequate mechanical properties to be developed as a substitute for native blood vessels. In vitro degradation study showed that the PLGA ultrafine fibrous scaffold could biodegrade in the PBS solution, and the mass loss, Mw, and breaking strength studies indicated that degradation rate of the electrospun PLGA nanofibers was greater in the first 2 weeks. After the degradation of 2 weeks, the degradation slowed down. Furthermore, with the extension of the degradation time, the thermal decomposition temperature of the PLGA scaffold decreased gradually. The results indicated that the electrospun PLGA vascular scaffold could be considered as an ideal candidate for tissue-engineered blood vessel.  相似文献   

8.
Background: Spinal cord has a limited capacity to repair; therefore, medical interventions are necessary for treatment of injuries. Transplantation of Schwann cells has shown a great promising result for spinal cord injury (SCI). However, harvesting Schwann cell has been limited due to donor morbidity and limited expansion capacity. Furthermore, accessible sources such as bone marrow stem cells have drawn attentions to themselves. Therefore, this study was designed to evaluate the effect of bone marrow-derived Schwann cell on functional recovery in adult rats after injury. Methods: Mesenchymal stem cells were cultured from adult rats’ bone marrow and induced into Schwann cells in vitro. Differentiation was confirmed by immunocytochemistry and RT-PCR. Next, Schwann cells were seeded into collagen scaffolds and engrafted in 3 mm lateral hemisection defects. For 8 weeks, motor and sensory improvements were assessed by open field locomotor scale, narrow beam, and tail flick tests. Afterwards, lesioned spinal cord was evaluated by conventional histology and immunohistochemistry. Results: In vitro observations showed that differentiated cells had Schwann cell morphology and markers. In this study, we had four groups (n = 10 each): laminectomy, control, scaffold and scaffold + Schwann cells. Locomotor and sensory scores of cell grafted group were significantly better than control and scaffold groups. In histology, axonal regeneration and remyelination were better than control and scaffold groups. Conclusion: This study demonstrates that bone marrow-derived Schwann cells can be considered as a cell source for Schwann cells in SCI treatment. Key Words: Rats, Spinal cord injuries (SCI), Bone marrow, Schwann cells, Cell transdifferentiation  相似文献   

9.
Electrospinning has been recognized as an efficient technique for the fabrication of neural tissue engineering scaffolds. Many approaches have been developed on material optimization, electrospinning techniques, and physical properties of scaffolds to produce a suitable scaffold for tissue engineering aspects. In this study, structural properties of scaffolds were promoted by controlling the speed of fiber collection without any post-processing. PLGA scaffolds, in two significantly different solution concentrations, were fabricated by the electrospinning process to produce scaffolds with the optimum nerve cell growth in a desired direction. The minimum, intermediate and maximum rate of fiber collection (0.4, 2.4, 4.8 m/s) formed Random, Aligned and Drown-aligned fibers, with various porosities and hydrophilicities. The scaffolds were characterized by fiber diameter, porosity, water contact angle and morphology. Human nerve cells were cultured on fiber substrates for seven days to study the effects of different scaffold structures on cell morphology and proliferation, simultaneously. The results of MTT assay, the morphology of cells and scaffold characterization recommend that the best structure to promote cell direction, morphology and proliferation is accessible in an optimized hydrophilicity and porosity of scaffolds, which was obtained at the collector linear speed of 2.4 m/s.  相似文献   

10.
Cartilage repair is a challenge in bone tissue reconstruction. In this study, silk fibroin (SF), chondroitin sulfate (CS) and hyaluronic acid (HA) were employed to fabricate scaffolds for tissue engineered cartilage by freeze drying technique. The secondary pores were formed in the main pores of SF/CS/HA scaffold which improved the pore connectivity and equilibrium swelling of the scaffold. Furthermore, rat bone marrow mesenchymal stem cells were seeded on the scaffolds to evaluate the cell adhesion and proliferation. Results of hematoxylin/eosin staining and cell counting kit-8 assay showed that the cells migration and differentiation of SF/CS/HA (80/15/5) scaffold were better than that of SF/CS/HA scaffolds with different ratios after 7 days culture. Moreover, immunohistochemistry and scanning electron microscope demonstrated that large amounts of collagen II and proteoglycans of the cells were expressed in the SF/CS/HA 3D scaffold, while the expression of collagen I was barely visible by immunohistochemistry. Abound of extracellular matrix was formed to morphologically round and distributed uniformly throughout the scaffolds. The 3D ternary scaffold could promote the cells chondrogenic differentiation without using any inductive agent and offer potential for cartilage tissue regeneration.  相似文献   

11.
Background:One of the main challenges with conventional scaffold fabrication methods is the inability to control scaffold architecture. Recently, scaffolds with controlled shape and architecture have been fabricated using 3D-printing. Herein, we aimed to determine whether the much tighter control of microstructure of 3DP PLGA/β-TCP scaffolds is more effective in promoting osteogenesis than porous scaffolds produced by solvent casting/porogen leaching. Methods:Physical and mechanical properties of porous and 3DP scaffolds were studied. The response of pre-osteoblasts to the scaffolds was analyzed after 14 days. Results:The 3DP scaffolds had a smoother surface (Ra: 22 ± 3 µm) relative to the highly rough surface of porous scaffolds (Ra: 110 ± 15 µm). Water contact angle was 112 ± 4° on porous and 76 ± 6° on 3DP scaffolds. Porous and 3DP scaffolds had the pore size of 408 ± 90 and 315 ± 17 µm and porosity of 85 ± 5% and 39 ± 7%, respectively. Compressive strength of 3DP scaffolds (4.0 ± 0.3 MPa) was higher than porous scaffolds (1.7 ± 0.2 MPa). Collagenous matrix deposition was similar on both scaffolds. Cells proliferated from day 1 to day 14 by fourfold in porous and by 3.8-fold in 3DP scaffolds. ALP activity was 21-fold higher in 3DP scaffolds than porous scaffolds. Conclusion:The 3DP scaffolds show enhanced mechanical properties and ALP activity compared to porous scaffolds in vitro, suggesting that 3DP PLGA/β-TCP scaffolds are possibly more favorable for bone formation. Key Words: Alkaline phosphatase, β-tricalcium phosphate, Poly(lactic-co-glycolic) acid copolymer  相似文献   

12.
Biomaterial bridges constructed from electrospun fibers offer a promising alternative to traditional nerve tissue regeneration substrates. Aligned and unaligned polycaprolactone (PCL) electrospun fibers were prepared and functionalized with the extracellular matrix proteins collagen and laminin using covalent and physical adsorption attachment chemistries. The effect of the protein modified and native PCL nanofiber scaffolds on cell proliferation, neurite outgrowth rate, and orientation was examined with neuronlike PC12 cells. All protein modified scaffolds showed enhanced cellular adhesion and neurite outgrowth compared to unmodified PCL scaffolds. Neurite orientation was found to be in near perfect alignment with the fiber axis for cells grown on aligned fibers, with difference angles of less than 7° from the fiber axis, regardless of the surface chemistry. The bioavailability of PCL fibers with covalently attached laminin was found to be identical to that of PCL fibers with physically adsorbed laminin, indicating that the covalent chemistry did not change the protein conformation into a less active form and the covalent attachment of protein is a suitable method for enhancing the biocompatibility of tissue engineering scaffolds.  相似文献   

13.
The main objective of this work was chemically bioactivation of the conducting polyanizidine (PANIZ) by incorporating a polyester such as polycaprolactone (PCL). Modified PANIZ nanocomposites were synthesized through ring opening and chemical oxidation polymerizations. A four-point probe was applied to measure the conductivity of newly synthesized star-like block copolymer (S-PCL-PANIZ) nanocomposite, which was about 0.44 S cm-1. Conductive biodegradable nanofibers were prepared by electrospinning with 25 and 75 % (wt/wt) S-PCL-PANIZ to PCL. The contact angle of each prepared nanofiber was 87±3°, supporting their usefulness for cell culture. The cultured mouse osteoblast MG63 cells demonstrated normal morphology and significantly higher adhesion and spreading on the nanofiber. The bioactivated PANIZ based nanocomposite may be fruitful in tissue engineering to fabricate conducting biodegradable scaffolds with improved cell adhesion properties for various cell cultures.  相似文献   

14.
The study aims at performing a comparative assessment of two types of burn wound treatment. The present study was designed to prepare crosslinked and blended two natural polymers nanofiber scaffolds using gelatin (GE) and hyaluronic acid (HA). The GE/HA composite nanofibrous membranes with varied GE/HA weight ratio have also been successfully fabricated by an electrospinning method. The average diameter of GE/HA fibers was in the range of 20 to 150 nm. In vivo efficacy was also investigated based on a deep second degree burns model for Wistar rats. At 14 days post-operation, the dermal defect basically recovered its normal condition. A percentage of wound closure of GE/HA composite nanofibrous membranes and ChitoHeal gel reached up to 81.9 % and 77.8 % respectively, compared with 65 % of the untreated control (p<0.05). Also, histological parameters were assessed on postoperative day 7 and 14. The results of in vivo experiments showed that more epidermis was formed in the gel and scaffold groups compared to the control group. The numbers of inflammatory cells in these two groups were also smaller as compared with the control group, which could well be the reason for the delayed healing in the control group.  相似文献   

15.
Electrical conductive nanocomposite fibers were prepared with polyaniline (PANI), polyacrylonitrile (PAN) and multi-walled carbon nanotubes (MWCNTs) via electrospinning. The morphology and electrical conductivity of the PANI/PAN/MWCNTs nanocomposite fibers were characterized by scanning electron microscope (SEM) and Van De Pauw method. Electrical conductivity of nanocomposite fibers increased from 1.79 S·m?1 to 7.97 S·m?1 with increasing the MWCNTs content from 3.0 wt% to 7.0 wt%. Compared with PANI/PAN membranes, the mechanical property of PANI/PAN/MWCNTs nanocomposites fiber membranes decreased. The microwave absorption performance of composite films was analyzed using waveguide tube, which indicated that with the thickness increasing the value of RL reduced from ?4.6 to ?5.9 dB.  相似文献   

16.
In this study, biodegradable poly(D,L-lactic-co-glycolic acid) (PLGA) fibers were prepared by a melt-electrospinning and treated with plasma in the presence of either oxygen or ammonia gas to modify the surface of the fibers. The effects of processing parameters on the melt-electrospinning of PLGA were examined in terms of fiber morphology and diameter. Among the processing parameters, the spinning temperature and mass flow rate had a significant effect on the average fiber diameter and its distribution. The water contact angle of melt-electrospun PLGA fibers decreased significantly from 123 ° to 55 ° (oxygen plasma treatment) or to 0 ° (ammonia plasma treatment) by plasma treatment for 180 sec, while their water content increased significantly from 2.4 % to 123 % (oxygen plasma treatment) or to 189 % (ammonia plasma treatment). Ammonia gas-plasma enhanced the surface hydrophilicity of PLGA fibers more effectively compared to oxygen gas-plasma. X-ray photoelectron spectroscopy analysis supported that the number of polar groups, such as hydroxyl and amino groups, on the surface of PLGA fibers increased after plasma treatment. Overall, the microfibrous PLGA scaffolds with appropriate surface hydrophilicity and fiber diameter could be fabricated by melt electrospinning and subsequent plasma treatment, without a significant deterioration of fiber structure and dimensional stability. This approach of controlling the surface properties and structures of fibers could be useful in the design and tailoring of novel scaffolds for tissue engineering.  相似文献   

17.
Over the last few years, significant research has been conducted in the construction of artificial bone scaffolds. In the present study, different types of polymer scaffolds, such as chitosan-alginate (Chi-Alg) and chitosan-alginate with fucoidan (Chi-Alg-fucoidan), were developed by a freeze-drying method, and each was characterized as a bone graft substitute. The porosity, water uptake and retention ability of the prepared scaffolds showed similar efficacy. The pore size of the Chi-Alg and Chi-Alg-fucoidan scaffolds were measured from scanning electron microscopy and found to be 62–490 and 56–437 µm, respectively. In vitro studies using the MG-63 cell line revealed profound cytocompatibility, increased cell proliferation and enhanced alkaline phosphatase secretion in the Chi-Alg-fucoidan scaffold compared to the Chi-Alg scaffold. Further, protein adsorption and mineralization were about two times greater in the Chi-Alg-fucoidan scaffold than the Chi-Alg scaffold. Hence, we suggest that Chi-Alg-fucoidan will be a promising biomaterial for bone tissue regeneration.  相似文献   

18.
As a biomaterial, besides excellent biocompatibility and biodegradability, suitable macropores and pores structure should be provided to guide cell extension and migration. In present study, the silk fibroin (SF) scaffold with uniaxial channels was prepared by directional temperature field freezing technique. The average pore diameter, pore density and porosity of the scaffold with oriented channels are ～128.7 µm, ～158 mm?2 and ～91.4 %, respectively. By controlling of the temperature gradient direction, the oriented multichannels of the scaffolds were formed in longitudinal easily. In process of the scaffolds fabrication, the directional growth of ice crystal could shear and draft to the silk fibroin molecule segments, which resulted in the new crystal nucleus formation in new zone and increase of β-sheet components in the scaffolds. In vitro, L929 cells were seeded on the scaffolds with oriented channels to evaluate the effect on cell behavior. Cell viability, adhesion and morphology were determined by methyl thiazolyl tetrazolium, confocal microscope and scanning electron microscope. The results showed that the cells anchored on the oriented channels, spread along the direction of the channels and hold a higher viability on the scaffolds with oriented channels. These new oriented multichannel scaffold could guide the adhesion and proliferation of L929 cells, which hold a potential in tissue engineering.  相似文献   

19.
We report a facile approach to fabrication and characterization of cationic titanium dioxide (TiO2+) on poly (vinyl alcohol)/poly (acrylic acid) (PVA/PAA) composite electro-spun nanofibrous mat. The aim of this study is to develop a “functional electrospun nanofibrous mat” as a sustainable approach to superior photocatalytic degradation of organic colorants. For that, the PVA/PAA nanofibrous mat was prepared by electrospinning of PVA and PAA solution according to an aspect ratio of 1:1 and later water stability was induced by the thermal cross linking at an elevated temperature of 145 °C for 30 minute. By means of electrostatic layer-by-layer (LbL) assembly, cationic titanium dioxide (TiO2+, ~19 nm) was immobilized on the surface of the water stable nanofibrous mat. As functionalized composited nanofibrous mat was characterized by using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and thermogravimetric analysis (TGA). Superior competency of the functionalized nanofibrous mat towards photocatalytic degradation of organic dye (methyl blue) in aqueous solution was observed by using UV-visible spectrophotometer with quantitative measuring method. The result indicates a complete degradation of methyl blue within 40 mins and superior reusability upto 5 cycles application. The study signifies the prospect of using electrospun nanofibers to manipulate the catalytic activity, which could be a foundation for further rational design of various composite nanofibrous materials.  相似文献   

20.
Presently, tissue engineering is employed in the restoration and repair of tissue defects. Degradable scaffolds, stem cells and stimulating factors are employed in this method. In this study, the effect of melanocyte-stimulating hormone (MSH) and/or hydroxyapatite (HA) on proliferation, osteoblast differentiation, and mineralization of human dental pulp stem cells (hDPSCs) seeded on PLLA-PCL nanofibrous scaffolds was evaluated. For this aim, PLLA-PCL-HA nanofibrous scaffolds were fabricated using electrospinning method. FE-SEM images exhibited that all nanofibers had bead-free morphologies with average diameters ranging from 150–205 nm. Human DPSCs seeded into PLLA-PCL nanofibers were treated with MSH. Cell viability, proliferation, morphology, osteogenic potential, and the expression of tissue-specific genes were assessed by means of MTT assay, FE-SEM, alizarin red S staining, and RT-PCR analysis. hDPSCs exhibited improved adhesion and proliferation capacity on the PLLA-PCL-HA nanofibers treated with MSH compared to other groups (p<0.05). Additionally, PLLA-PCL-HA nanofibers treated with MSH exhibited significantly higher mineralization and alkaline phosphatase activity than other groups. RT-PCR results confirmed that PLLA-PCL-HA nanofibers enriched with MSH could significantly unregulated the gene expression of BMP2, osteocalcin, RUNX2 and DSPP that correlated to osteogenic differentiation (p<0.05). Based on results, incorporation of HA nanoparticles in PLLA-PCL nanofibers and addition of MSH in media exhibited synergistic effects on the adhesion, proliferation, and osteogenesis differentiation of hDPSCs, and therefore assumed to be a favorable scaffold for bone tissue engineering applications.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号