首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Summary The technology and chemistry of recent advances in alkaline pulping are reviewed from the standpoint of the authors' work over the past few years. Topics reviewed include soda-amine [particularly soda-ethylenediamine (EDA)], soda-anthraquinone (AQ), kraft-AQ, and soda-AQ/EDA pulping and their effects on pulp strength properties and bleachability. There is evidence to support the concept that the rates of all alkaline delignification reactions, including kraft, are controlled by a reductive step which transfers electrons to the degrading lignin.  相似文献   

2.
The viscosity of kenaf bast fiber has been found to be highly sensitive and variable with different pulping methods; therefore, it is important to choose proper chemicals and conditions for pulping and bleaching of kenaf bast fiber. From several pulping experiments, a nonconventional pulping method with a combination of ammonium oxalate pretreatment followed by soda pulping at normal pressure and then acidic chlorite delignification was developed to obtain high-viscosity pulp (162 centipoise). The optimum level of alkali dosage of soda pulping for high-viscosity pulp was found to be 15% (on pulp as NaOH). Pulps showed linear relations between viscosity and xylose or glucose contents, but the combination pulping method gave extremely high pulp viscosity, beyond the relations. The highest viscosity pulp from kenaf bast fiber demonstrated a tear index about twofold and a folding endurance 6.2-fold higher than those of Manila hemp pulp with comparable tensile and burst indexes. The high-viscosity pulp could be used in the production of high-quality currency paper or longevity paper for special uses.Part of this paper was presented at the 43rd Lignin Symposium, Fuchu, Tokyo, October 26–27, 1998  相似文献   

3.
Summary The kinetics of the isothermal prehydrolysis of beechwood at 160°C and 170°C were investigated. It was shown that the hydrolysis of the hemicellulose portion was realised in two phases. The depth and rate of the first rapid prehydrolysis phase and the second slow phase depend on the temperature used. The lignin content in the prehydrolysed chips increased with the duration of the prehydrolysis due to the easily removable hemicellulose portion. The maximum amount of lignin extracted was gained after 45–60 minutes of isothermal prehydrolysis at 160°C with the yield decrease to 82–80 per cent and at 170°C with the yield decrease to 70–68 per cent. At the temperature of 160°C the amount of the lignin portion extracted was about 5 per cent and at 170°C at about 10 per cent of the whole lignin content in wood. The extraction of the whole hemicellulose portion present in wood was attained at 160°C after 5 hours prehydrolysis time, at 170°C after 80 minutes.By the prehydrolysis of hardwood to 30 per cent loss of the wood substance highly purified dissolving pulp was prepared by AQ catalysed sodium pulping. The pulp attained was characterised by a high alpha-cellulose content over 97 per cent and a low solubility in solutions of alkali. The sulphur-free delignification together with the low consumption of active chlorine (1.5–1.7 per cent) cause less environmental pollution.  相似文献   

4.
The process of peroxide bleaching of Populus tomentosa kraft pulp with H2O2 pretreatment under acid condition was studied. The variations of pulp characteristics such as brightness, Kappa number and viscosity during the peroxide bleaching process were discussed and the concept of the A/B value was presented for the first time. The results show that acid pretreatment with H2O2 is essential to improve pulp brightness and avoid viscosity loss. The conclusion is reached that the A/B value has great influence on pulp properties when the total amount of peroxide used in the bleaching process is 2%–5%. Pulp with a high viscosity and brightness can be obtained when A/B is about 0.15. [Supported by the National “863” Project (Grant No. 2002AA241071)]  相似文献   

5.
本文介绍了(1)用桉木生产漂白化学浆,包括硫酸盐法和碱一蒽醌法制浆;(2)用按木生产漂白半化学浆,主要是中性亚硫酸盐半化学高得率浆;(3)用桉木生产漂白化学机械浆,包括冷碱法和亚硫酸盐法制浆;(4)用桉木生产漂白化学热磨机械浆。  相似文献   

6.
myo-Inositol-[2-3H] and d-glucuronic acid-[6-14C] were administered simultaneously to a growing stem of magnolia (Magnolia kobus DC) to label xylan and pectin, respectively, in the cell wall. Determination of the radioactivity of nitrobenzene oxidation products and sulfuric acid hydrolysates of the newly formed xylem indicated that xylan and pectin were labeled with 3H and 14C, respectively. The doubly labeled wood tissue was treated to kraft pulping, and the radioactivity of the pulping black liquor and treated wood tissue were determined at various stages of the pulping to compare the dissolving behavior between pectin and xylan during the pulping. The results showed that pectin was not dissolved as easily as xylan and was not redeposited on pulp fiber at the late stage of the pulping.Part of this report was presented at the 40th Lignin Symposium at Tsukuba, October 1995  相似文献   

7.
通过比较不同条件下氧脱木质素后浆料的卡伯值、黏度、得率、白度和脱木质素选择性等指标,研究了硫酸盐竹浆卡伯值25.6氧脱木质素工艺参数,发现用碱量和温度是决定氧脱木质素效果的主要因素.最佳工艺条件为:用碱量3.5%,温度85℃,氧气压力0.6MPa,保温时间80min.两段氧脱木质素(中间不洗涤)可以提高木质素脱除率和选择性.研究还发现,在氧碱脱木质素过程中加入醌类混合物助剂(表示为Oq),可使浆料的黏度和氧脱木质素的选择性大大提高.采用OQ(PO)、(O1O2)Q(PO)、OQ(PO)1(PO)2和OqQ(PO) 4种短漂序都可使竹浆白度达到80%(ISO) 以上,且具有很好的白度稳定性.OQ(PO)、(O1O2)Q(PO)和OQ(PO)1(PO)2 3种漂序漂后浆纸页强度性能相近,OqQ(PO)漂后浆的抗张指数、撕裂指数和耐破指数明显高于其它3种漂序.  相似文献   

8.
To investigate the possibility of decontaminating 137Cs-contaminated Cryptomeria japonica wood, kraft pulping was conducted and the Cs behavior in the reaction process was examined. 133Cs-treated or 137Cs-contaminated bark, sapwood, and heartwood chips of Cryptomeria japonica were digested using an aqueous solution of NaOH and Na2S. The pulp was washed with ultrapure water and filtered, after which the filtrate (black liquor) was collected. The black liquor was acidified to separate the supernatant and precipitation. The Cs (133Cs and 137Cs) concentrations in the chip and reaction products were measured. As for wood samples, the majority of Cs was present in black liquor, while only a minor amount of Cs was retained in the pulp (<1%). In the case of bark, although the majority of Cs was present in the black liquor, the proportion of Cs in the pulp was much higher than that in the wood pulp. In addition, the Cs in the precipitation of the bark was higher than that in the wood, possibly because the Cs in the bark was combined with some components, which is insoluble in alkaline solution. Our results suggest that 137Cs-contaminated Cryptomeria japonica wood can be used in the pulp and paper industries.  相似文献   

9.
  相似文献   

10.
Wood density and pulp yield are key parameters in the evaluation of tree productivity and quality for pulping and their relationships are of high practical importance. The influence of wood density on pulp yield and other pulp quality parameters was investigated using Acacia melanoxylon and its natural variability as a case study. Twenty trees were harvested (five trees in each of four sites in Portugal), and wood discs taken at different height levels, from the base to the top of the tree, providing 100 wood samples, covering the natural variability of wood density ranging from 449?kg?m?3 to 649?kg?m?3. Under the same experimental conditions of kraft pulping, screened pulp yield ranged 47.0?C58.2?%, Kappa number 10.9?C18.4, ISO brightness 14.9?C45.6, fibre length 0.660?C0.940?mm and fibre width 16.2?C22.9???m. The pulp yield and Kappa number were not correlated with wood density. Higher pulp yields were associated with lower Kappa numbers and alkali consumption, suggesting the important role of chemical composition of wood on kraft cooking. The results confirm the high pulping potential of Acacia melanoxylon trees grown in Portugal and suggest the possibility of tree selection using both wood density and pulp yield.  相似文献   

11.
The steam explosion (SE) pretreatment associated with the organosolv process was investigated to produce dissolving pulp from eucalyptus. Prehydrolysis Kraft (PHK) pulping was also done to produce viscose and acetate grade pulps as reference. The organosolv pulps were delignified in two steps with sodium chlorite. Viscose and acetate grade PHK pulps were bleached by OD0(EH)D1P and OD0(EP)D1PCCE sequences, respectively. Dilute acid-catalyzed (with acid addition) SE pretreatment dissolved more xylan than auto-catalyzed (no acid addition) SE pretreatment. Steam-exploded unbleached organosolv pulps showed lower residual lignin content and screened yield than unbleached organosolv pulps without SE pretreatment. Steam explosion pretreatment helped to decrease lignin content and damaged fiber length of unbleached organosolv pulps. The 1.0% H2SO4 organosolv pulp (organosolv dissolving pulp at bioconversion conditions) showed the highest reactivity. Even showing low viscosity for some applications, in general, the organosolv dissolving pulps produced in this study can be used for making lyocell fibers.  相似文献   

12.
中国引种澳大利亚相思树种制硫酸盐浆适应性研究   总被引：2，自引：1，他引：2  
无论是从林业角度还是在制浆性能方面，不同种源间存在明显差异。本文研究了我国亚热带工区引种澳大利亚相思树的基本密度纸浆产率、制硫酸盐浆和漂白性能，比较了不同种源间的差异。研究结果表明，在有效碱用量为１２．５％－１５．５％时纸浆得率达５１．２％－５３．６％，经ＣＥＨＤ四段漂白后，所得纸浆性能可以满足配抄印刷和包装类用纸要求。  相似文献   

13.
Summary The methoxyl loss from softwood kraft pulp during chlorine dioxide treatment can be accounted for by methanol and the methoxyl content of dissolved organic material in the bleach filtrate. This was established by a methoxyl group mass balance made at different bleaching times. It was found that ClO2 rather than the in-situ generated hypochlorous acid is mainly responsible for the methanol formation. It was shown that fully methylated pulp is hardly demethylated by ClO2 under industrial ClO2 bleaching conditions when hypochlorous acid is effectively captured. Furthermore, the rates of formation of methanol and methoxyl group containing dissolved organic material are proportional to each other. The experimental evidence suggest that demethylation and delignification are closely related during ClO2 treatment of softwood kraft pulp.  相似文献   

14.
世界木材制浆技术新进展   总被引：1，自引：0，他引：1  
文章论述了木材制浆技术的新进展，在硫酸盐法制浆技术的革新方面，推荐了间歇蒸煮的快速置换加热（ＲＤＨ）技术与连续蒸煮的改良连续蒸煮（ＭＣＣ）和深度脱木素改良连续蒸煮（ＥＭＣＣ）技术。还介绍了超高得率制浆方法，特别是碱性过氧化氢机械制浆（ＡＰＭＰ）法和爆破制浆（ＥＰ）法，用这两种方法生产的纸浆得率高、白度高、强度高、能耗较低。  相似文献   

15.
Summary Explosion pulping results in strong pulp with breaking length at 100 ml CSF (Canadian standard freeness) higher than 6.5 kg and burst index approaching 4 KPa m2/g. The real advantage of eucalyptus explosion pulp over conventional CMP (chemical-mechanical pulp) and CTMP (chemical-thermo-mechanical pulp) is observed when the impregnation solution contains less than 2% NaOH along with 8% Na2SO3, and when the liquor/chips ratio equals 3. The strength of eucalyptus explosion pulp obtained by using a pretreatment solution consisting of 8% Na2SO3 and 1% NaOH is comparable with that of eucalyptus kraft pulp. The concentration of NaOH present in the pretreatment solution has a very important effect on the specific refining energy of eucalyptus explosion pulp as well as of CMP and CTMP. The explosion pulp obtained from eucalyptus pretreated with a solution containing an appropriate quantity of caustic along with Na2SO3 not only requires a minimum specific refining energy but also provides the highest strength values in comparison to that of CMP and CTMP.  相似文献   

16.
Summary A new mathematical model for checking and controlling the kraft pulping process has been derived. The model is based on the modified relationship between the lignin content and the alkali concentration of a cooking liquor expressed as the ratio of lignin/active alkali vs. concentration of the active alkali in a cooking liquor. The derived model characterizes the variation of the lignin content of the partially delignified wood or pulp with the concentration of the residual alkali in a cooking liquor during an entire pulping cycle, i.e. during the initial, transition, bulk and residual phases of the kraft delignification. The relationship between the lignin content of the partially delignified wood ships or pulp and the concentration of the residual alkali in a cooking liquor is expressed by the logarithmic straight line equation or its power form. The slope and intercept constants of the derived equation for the individual phase of delignification have different values. Received 5 June 1996  相似文献   

17.
The correlation of structural assembly on a molecular level with macroscale properties such as accessibility and reactivity was investigated. A series of TCF-bleached E. globulus kraft dissolving pulps was prepared aiming at a specification suitable for viscose application. The removal of xylan to a comparable level was achieved by different pre- and post-treatments. Solid-state CP-MAS 13C NMR was used to determine the degree of order and the lateral fibril dimensions of cellulose fibrils. The results of the NMR measurements were related to the processability of these pulps during viscose manufacture, expressed in terms of filterability of the viscose dope and its amount of undissolved particles. The cellulose crystallinity did not affect the pulp reactivity. It was noticed that the cold caustic extracted (CCE) pulps revealed both large fibril aggregate width as determined from NMR data and low reactivity toward xanthation at the same time. These pulps exhibited significantly higher amounts of alkali-resistant xylan than those prepared by prehydrolysis kraft cooking.  相似文献   

18.
麦草经碱法蒸煮后,所得浆料不经洗涤,直接通入氧气进行处理。以黑液黏度,浆料卡伯值为考核指标,设置4因素3水平正交试验,对试验结果作极差分析发现,在用碱量0～2%、氧压0.2～0.6 MPa、温度70～100℃和时间30～90 min内得到较适宜的工艺条件为:用碱量1%,氧压0.6 MPa,温度85℃,时间60 min。氧碱蒸煮结果为:黑液黏度3.4 mPa.s,浆料卡伯值17.9。与第一段碱法蒸煮相比,黑液黏度降低33.3%,浆料卡伯值降低11.8%。  相似文献   

19.
The aim of this study was to investigate the effects of plum gum liquor and sodium perborate addition to oxygen delignification process on spruce kraft pulp properties. Yields and viscosity of pulp were protected against oxidative attack, when kappa number of pulp was not changed by adding plum gum to oxygen delignification process. Delignification ratio improved by 7.4% without any viscosity loss by adding only 0.25% sodium perborate as active oxygen with plum gum liquor to the oxygen delignification process. It was found that crystallinity of pulp was improved by adding plum gum and sodium perborate to oxygen delignification. It was also determined that sodium perborate had an affirmative effect on delignification ratio, when plum gum affected pulp viscosity positively.  相似文献   

20.
High-density polyethylene (HDPE), bagasse fibers treated by four pulping processes (AS-AQ (alkaline sulfite anthraquinone), SODA-AQ (soda anthraquinone), MEA (monoethanolamine) and chemical–mechanical pulping (CMP)), three levels of nano-SiO2 (0, 2, and 5?wt%), and maleic anhydride polyethylene as coupling agent were used to produce pulp–plastic composites (PPCs) by injection molding. The physical and mechanical properties of corresponding composites were evaluated according to ASTM standards. The results showed that compared to untreated bagasse/HDPE composite, the addition of bagasse pulp fibers increased significantly the mechanical properties such as tensile strength and modulus, flexural strength and modulus, and hardness. The chemical pulps-reinforced composites showed better mechanical strengths than that of CMP-reinforced composites, but in some properties, CMP pulp composites have comparable results to the chemical pulp-reinforced composites. Natural fibers (untreated and treated) increased water absorption and thickness swelling of composites compared to pure HDPE. The addition of nano-SiO2 particles showed both increasing and decreasing trends on physical and mechanical properties ofPPCs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号