首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 36 毫秒
1.
This experiment was conducted at Zahak Agricultural Research Station in the Sistan region in southeast Iran. A factorial design with three replications was used to determine the effects of zinc (Zn), iron (Fe), and manganese (Mn) applications on wheat yield, Zn, Fe, and Mn uptakes and concentrations in grains. Four levels of Zn [soil applications of 0, 40, and 80 kg ha?1 and foliar application of 0.5% zinc sulfate (ZnSO4) solution], two levels of iron sulfate (FeSO4; 0 and 1%) as foliar application, and two levels of Mn (0 and 0.5%) also as foliar application were used in this study. Results showed that the interactive effects of Zn and Mn were significant on the number of grains in each spike. The highest number of grains resulted from the application of 80 kg ZnSO4 ha?1 and foliar Mn. The interactive effects of Zn and Fe were significant on weight of 1000 grains. The highest weight of 1000 grains resulted from application of 80 kg Zn and foliar Fe. Application of 80 kg ZnSO4 ha?1 alone and 80 kg ZnSO4 ha?1 with foliar application of Mn significantly increased grain yield in 2003. The 2‐year results showed that foliar application of Zn increased Zn concentration and Fe concentration in grains 99% and 8%, respectively. Foliar application of Fe resulted in a 21% increase in Fe concentration and a 13% increase in Zn concentration in grains. The foliar application of Mn resulted in a 7% increased in Mn concentration in grains.  相似文献   

2.
Abstract

This study investigated effects of iron (Fe) and nitrogen (N) foliar application on Fe and zinc (Zn) content in chickpea grain, grain yield, and protein content. Application of FeSO4 at 0.5% at flowering?+?pod formation stages resulted in the highest Fe (73.50 and 75.34?mg Fe kg?1 grain in first and second year) and Zn (35.08 and 34.21?mg Zn kg?1 grain) content in grain followed by the application of FeSO4 at 0.5% at flowering stage alone (68.27 and 69.97?mg Fe kg?1 grain and 32.44 and 32.27?mg Zn kg?1 grain) and control (54.63 and 55.69?mg Fe kg?1 grain and 29.48 and 29.07?mg Zn kg?1 grain). Urea spray at 2% at flowering as well as at flowering?+?pod formation stages also improved the Zn and Fe content in the grain. Combined use of Fe and urea improved the grain Fe and Zn content over sole application of Fe.  相似文献   

3.
Abstract

Efficient nutrient and water use are two important considerations to obtain good harvests of wheat. This necessitates the development of an effective nutrient management technique that not only increases yield, but simultaneously can save nutrient and water use. In this context, a field experiment was conducted at Indian Agricultural Research Institute, New Delhi, India to evaluate the residual effect of sesbania and rice bean (in-situ), subabul (ex-situ) green manuring and Zinc (Zn) fertilization, using chelated Zn-ethylenediaminetetraacetic acid (Zn-EDTA) on nutrient use, yields and water productivity of wheat under rice–wheat cropping system. Among residual effects of green manure crops and Zn fertilization, sesbania and foliar spray of 0.5% chelated Zn-EDTA at 20, 40, 60 and 80 days after sowing (DAS) recorded significantly higher nutrient content and uptake and yields than other green manure crops and Zn treatments. Residual effect of sesbania saved about 46.5?×?103 and 30.5?×?103 L irrigation water per tonne of wheat over subabul and rice bean, respectively. Foliar spray of 0.5% chelated Zn-EDTA at 20, 40, 60 and 80 DAS saved about 55.5?×?103, 47?×?103 and 13?×?103 L irrigation water per tonne wheat over residual effect of 5?kg Zn ha?1 through chelated Zn-EDTA as soil application, 2.5?kg Zn ha?1 through chelated Zn-EDTA as soil application + 1 foliar spray of 0.5% chelated Zn-EDTA at flowering and foliar spray of 0.5% chelated Zn-EDTA at active tillering?+?flowering?+?grain filling, respectively. Correlation analysis showed positive correlation between Zn uptake and grain yield.  相似文献   

4.
In many regions, drought during flowering and grain‐filling inhibits micronutrient acquisition by roots resulting in yield losses and low micronutrient concentrations in cereal grains. A field and a greenhouse experiment were conducted to study the effect of foliar applications of zinc (Zn), boron (B), and manganese (Mn) at late growth stages of winter wheat (Triticum aestivum L.) grown with or without drought stress from booting to maturity. Foliar applications of Zn, B, and Mn did not affect grain yield in the absence of drought. However, under drought, foliar application of Zn and B in the field increased grain yield (15% and 19%, respectively) as well as raising grain Zn and B concentration, while Zn and Mn sprays in the greenhouse increased grain yield (13% and 10%, respectively), and also increased grain Zn and Mn concentrations. Furthermore, under drought stress both in the field and greenhouse experiment the rate of photosynthesis, pollen viability, number of fertile spikes, number of grains per spike, and particularly water‐use efficiency (WUE) were increased by late foliar application of micronutrients. These results indicate that by increasing WUE foliar application of Zn, B, and Mn at booting to anthesis can reduce the harmful effects of drought stress that often occur during the late stages of winter wheat production. These findings therefore are of high relevance for farmers' practice, the extension service, and fertilizer industry.  相似文献   

5.
Abstract

It is still unclear if different sources of nitrogen (N) can variably influence grain accumulation of zinc (Zn), N, and phytate. We tested foliar treatments of 0 or 0.25% Zn as zinc sulfate in combination with 0 or 1% N as ammonium chloride, ammonium sulfate or urea sprayed on field-grown-wheat (Triticum aestivum L.) foliage at anthesis and 10 days later. Leaf burning caused by ammonium chloride significantly decreased grain yield. Grain N concentration was the highest in the urea +0.25% Zn treatment. Foliar N application influenced grain Zn concentration only if Zn was included in the spray. Grain phytate concentration was significantly decreased by both N and Zn sprays. Estimated Zn bioavailability in grains was the highest at 0.25% Zn and was not influenced by the N sources. Based on grain yield, grain N concentration, and Zn bioavailability in grains, foliar application of Zn?+?urea is an optimal strategy.  相似文献   

6.
A field experiment has been conducted to determine the effects of different irrigation water and AMF (Arbuscular Mycorrhizal Fungi) biofertilizer, photosynthesis activator and traditional fertilizer dry bean (Phaseolus vulgaris L.) on yield and growth parameters in Nevsehir Province of Turkey in 2015. The experiment has been carried out using three replications in a split plot design with three different irrigation types as main plots and AMF biofertilizer (ERS), photosynthesis activator (Multigreen-Mg), traditional fertilization (TF-Control), ERS + Mg, ERS + TF and TF + Mg applied as subplots. The number of pods per plant, the length of pods, the number of grains per pod, the weight of grains per plant, the yield of grains, 1000 seed weight, the number of grains per plant, protein yield, arbuscular mycorrhizal fungi rate have been evaluated as yield and growth criteria in the study. In the experiment, as well as the treatment x irrigation interaction, the plant height, pod number per plant, pod lenght, grain number per pod, grain weight per plant, grain yield, 1000 seed weight, grain number per plant, protein rate/grain, protein yield, root weight and AMF colonization parameters, were the other studied properties that were found to be significant. The results obtained were 877.6 mm for I100 irrigation treatment, 512.2 mm for I50 irrigation treatment and 40.19 mm water for I30 irrigation treatment. Regarding the growth parameters of dry bean, the highest PH was in ERS + Mg (67.66 cm), the lowest PH was in ERS (54.33 cm); In I50, the highest Plant Height (PH) was in ERS + Mg (65.66 cm), the lowest PH was in TF-Control (53.00 cm); and in I30, the highest PH was in TF-Control (50.66 cm), and the lowest PH was again in ERS + Mg (44.33 cm). For protein yield (PY) value, ERS + Mg, ERS + TF, TF + Mg have been placed in the same group, in I100 and I50 irrigation treatment. The highest value was ERS + TF (34.90 kg da?1) in I100, The lowest value was TF-control (19.90 kg da?1) in I30 irrigation treatment. In terms of mycorrhiza colonization ratio, ERS has been ranked first in all irrigation treatments, while the highest mycorrhiza colonization has been observed in I30 irrigation treatment (26.30%). ERS was followed by ERS + Mg (23.33%). As expected, the lowest mycorrhiza colonization ratio in all irrigation treatments have been observed in TF-control treatment, while the highest mycorrhiza colonization ratio has been respectively observed in I30 and I50 irrigation topics. The highest root weight (RW) in I100 irrigation treatment was observed in ERS (15.06 g plant?1) and it was observed in ERS (19.05 g plant?1; 26.30 g plant?1) in I50 and I30 irrigation treatments. The lowest RW in all irrigation treatments has been observed in TF + Mg (4.43 g plant?1, 6.40 g plant?1, 10.26 g plant?1), respectively.  相似文献   

7.
A field and greenhouse experiments were conducted to determine the requirement of Fe nutrient supplied through foliar and soil application in soybean inoculated with different selected isolates of exotic and native Bradyrhizobium spp. in saline soils. Six soybean genotypes and three Bradyrhizobium spp. were used for the greenhouse experiments, whereas only two soybean genotypes, namely TGx-1336424 and GIZA, were selected for further study under field conditions. Two levels of FeSO4 (0 and 4 mg Fe kg?1 soil) directly supplied to the soil and three levels of Fe-ethylenediaminetetraacetic acid (0–2% of Fe) through foliar application were used for greenhouse and field experiments, respectively. The results of the greenhouse experiment indicated a non-significant effect of Fe application on nodulation and shoot biomass in soybean. Fe application did not improve the grain yield and total biomass yield in soybean inoculated with UK isolate and local isolate but showed remarkable improvement with TAL-379. High soil native N might be the cause for insignificant effect of Fe applied at 2% in highly effective inoculated plants. Therefore, it can be concluded that the symbiotic effectiveness of Bradyrhizobium sp. and the native soil N would affect the soybean Fe requirement supplied through foliar application.  相似文献   

8.
ABSTRACT

The present investigation was planned to determine the effect of deficit irrigation, mulching and poultry manure application on sorghum grain, forage yield and water-use efficiencies. Two field experiments were conducted during 2016 and 2017 growing seasons at Demo farm, Fayoum, Egypt. Eighteen treatments comprising of two rates of rice straw as soil mulching (SM; zero and 10 ton per hectare), three irrigation treatments (I100% = 100%, I85% = 85% and I70% = 70% of crop evapotranspiration (ETc) and three poultry manure (PM) levels (0, 24 and 36 ton per hectare) were studied under controlled surface irrigation system. Sorghum growth attributes (plant height, stem diameter, leave area), grain and forage yield, water-use efficiencies (G-WUE and F-WUE) were significantly (p < .05) affected by irrigation quantity and both soil mulch and poultry manure application. Poultry manure resulted in a significant decrease in soil bulk density, electrical conductivity (ECe), soil pH, hydraulic conductivity and total porosity, useful pores, and water holding pores were increased. The results showed that underwater scarcity, application of (I85 × PM36× SM10) treatment was found to be favorable to save 15% of the applied irrigation water as compared to I100, at the time produced the same sorghum yields.  相似文献   

9.
Research was performed during the 2010 and 2011 growing seasons to investigate the effect of zeolite and zinc (Zn) foliar application on the qualitative characteristics and oil yield of canola cultivars at different moisture regimes. A factorial split-plot experiment was performed on the basis of the randomized complete block design with three replications in the Seed and Plant Improvement Institute, Karaj, Iran. The treatments were as follows: (1) irrigation (I), complete (I1), and restricted (I2) at the pod formation stage, (2) zeolite (Z), 0 (Z1), and 15 t ha?1 (Z2), and (3) Zn, zinc sulfate concentrations of 0%, 0.1%, and 0.2 % (Zn1, Zn2, and Zn3) at the pod formation stage. These treatments were applied on Licord, RGS003, and Opera cultivars. The results show that the simple effect of treatments were statistically significant for all assessed traits at P < 0; as well as the interaction effects of Z and Zn (P < 0.01) and the interaction effects of I and cultivar (P < 0.01). The greatest rates of all studied traits were obtained by applying Z2Zn2 (15 ton ha?1 zeolite and 0.1% Zn sulfate) in both irrigation regimes. The rates of grain yield, biological yield, and harvest index improved by 43.82%, 73.99%, and 30.04%, respectively, using a combined application of Z and Zn. Therefore, based on the low cost of natural Z and a low Zn intake, these treatments could be used to enhance the performance of canola, especially in regions that are exposed to water stress.  相似文献   

10.
ABSTRACT

Zinc (Zn) and iron (Fe) deficiency-related health problems in humans may be solved by improving their concentration in edible grains. The study, conducted in 2015–16 and 2016–17, investigated the effects of soil and foliar application of Zn and foliar application of urea on grain Zn and Fe accumulation of chickpea grains. Soil application of ZnSO4 @ 25 kg ha?1 + foliar spray of ZnSO4 @ 0.5% at flowering and pod formation stages resulted in the highest Zn (45.06 & 44.69 mg Zn kg?1 grain in the first and second year of study) and Fe (59.74 & 62.88 mg Fe kg?1 grain) content. Urea application @ 2% at flowering and pod formation stages also resulted in the highest grain Zn (41.12 & 40.26 mg Zn kg?1 grain) and Fe (58.95 & 61.95 mg Fe kg?1 grain) content. Grain yield and protein content were significantly increased over control with these treatments. As compared to the sole application of Zn, the combined use of Zn and urea improved the grain Zn and Fe contents. Zinc and urea can be applied to improve Zn and Fe content in chickpea grains and, therefore, can help in ameliorating malnutrition in burgeoning human population.  相似文献   

11.
Foliar application of fertilizers can guarantee the availability of nutrients to rice for obtaining higher yield. Rice responds favorably to macro- and micronutrients and the tolerance to salinity hazards improves by decreasing the N/S ratio. In this study, results showed that nutrient concentrations (g L?1) for rice are: nitrogen (N) 108.0, phosphorous (P2O5) 6, potassium (K2O) 81.0, calcium (CaO) 15.0, and magnesium (MgO) 6 g L?1; and for iron (Fe), manganese (Mn), zinc (Zn), cupper (Cu), boron (B), molybdenum (Mo) and silicon (Si) the recommended concentrations are 0.6, 0.45, 0.21, 0.06, 0.09, 0.0002 and 0.004 g L?1, respectively. A significant increase was recorded in number of panicles m?2, 1000 grain weight, biological yield and grain yield with foliar application of nutrients. Five foliar applications of nutrients resulted in maximum number of panicles m?2, grains panicle?1, 1000 grain weight and biological yield. It is concluded that five foliar applications of balanced amounts of fertilizers at the seedling stage (two sprays), tillering (single spray) and at panicle initiation and panicle differentiation (two sprays) helped in enhancing yield and yield components of rice. In this research, five foliar applications produced the smallest damaging effects of blast (Pyricularia oryzae) in rice.  相似文献   

12.
An experiment was conducted to assess the zinc (Zn) availability to wheat in alkaline soils during Rabi 2009–2010. Wheat seedlings in pots having 2 kg alkaline sandy soil per pot were treated with 5, 10 and 15 kg Zn ha?1 as soil and with 0.5 and 1.0% zinc sulfate (ZnSO4) as foliar application. Results showed that Zn increasing levels in soil helped in phosphorus uptake up to boot stage but its conversion to grain portion lacked in Zn treated plants. Potassium (K) uptake also increased up to 6.24% in boot stage with treatment of 10 kg Zn ha?1 + 1.0% ZnSO4 foliar spray. Zinc (Zn) concentration increased in plant tissues with the increasing level of Zn application but this disturbed the phosphorus (P)-Zn interaction and, thus, both of the nutrients were found in lesser quantities in grains compared to the control. Despite of the apparent sufficient Zn level in soil (1.95 mg kg?1), improvement in growth and yield parameters with Zn application indicate that the soil was Zn deplete in terms of plant available Zn. The above findings suggest that the figure Zn sufficiency in alkaline soil (1.0 mg kg?1) should be revised in accordance to the nature and type of soils. Furthermore, foliar application of Zn up to 1.0% progressively increased yield but not significantly; and it was recommended that higher concentrations might be used to confirm foliar application of Zn as a successful strategy for increasing plant zinc levels.  相似文献   

13.
To evaluate the effects of irrigation period and iron (Fe), zinc (Zn) foliar application on agronomic characters in Borago officinalis, Calendula officinalis, Thymus vulgaris and Alyssum desertorum, investigations were performed in a complete randomized block design with three replications in 2014 and 2015. The factors applied were (a) Fe foliar application (0, 200, 400, 600 ppm), (b) Zn foliar application (0, 200, 400, 600 ppm) and (c) irrigation periods (3, 6, 9 days). Results showed that Fe and Zn had a significant effect on many factors including shoot dry matter, height, flower production (marigold, borage and thyme) and seed (alyssum). Interaction of 400 ppm of Zn and Fe with irrigation period every 3 days was the best and produced the best amounts in most of the measured characters. The lowest of the measured characters was 600 ppm of Fe and Zn by irrigation period of 9 days. Results showed that Zn micronutrient was more effective than Fe.  相似文献   

14.
Iron (Fe) availability is low in calcareous soils of southern Iran. The chelate Fe-ethylenediamine di (o-hydroxy-phenylacetic acid) (Fe-EDDHA), has been used as an effective source of Fe in correcting Fe deficiency in such soils. In some cases, however, its application might cause nutritional disorder due to the antagonistic effect of Fe with other cationic micronutrients, in particular with manganese (Mn). A greenhouse experiment was conducted to evaluate the influence of soil and foliar applications of Fe and soil application of manganese (Mn) on dry matter yield (DMY) and the uptake of cationic micronutrients in wheat (Triticum aestivum L. var. Ghods) in a calcareous soil. Results showed that neither soil application of Fe-EDDHA nor foliar application of Fe sulfate had a significant effect on wheat DMY. In general, Fe application increased Fe uptake but decreased that of Mn, zinc (Zn), and copper (Cu). Application of Mn increased only Mn uptake and had no significant effect on the uptake of the other cationic micronutrients. Iron treatments considerably increased the ratio of Fe to Mn, Zn, Cu, and (Mn + Zn + Cu). Failure to observe an increase in wheat DMY following Fe application is attributed to the antagonistic effect of Fe with Mn, Zn, and Cu and hence, imbalance in Fe to (Mn + Zn + Cu) ratio. Due to the nutritional disorder and imbalance, it appears that neither soil application of Fe-EDDHA nor foliar application of Fe-sulfate is appropriate in correcting Fe deficiency in wheat grown on calcareous soils. Hence, growing Fe-efficient wheat cultivars should be considered as an appropriate practice for Fe chlorosis-prone calcareous soils of southern Iran.  相似文献   

15.
Abstract

Foliar fertilization with micronutrients and amino acids (AAs) has been used to increase the grain yield and quality of different crops. The aim of the present study was to evaluate the effects of Zn and AAs foliar application on physiological parameters, nutritional status, yield components and grain yield of wheat-soybean intercropping under a no-till management. We used a randomized block experimental design consisting of eight treatments and four replicates. The treatments were five Zn rates (0, 1, 2, 4 and 8?kg ha?1) and 2?L ha?1 of AAs and three additional treatments: a control (without the Zn or AA application), 2?kg ha?1 Zn and 2?kg ha?1 Zn + 1?L AA. The treatments were applied by spraying during the final elongation stage and at the beginning of pre-earing for the wheat and in growth stage V6 for the soybean for two crop years in a Typic Oxisol (860?g kg?1 clay). Zinc foliar fertilization increased the wheat grain Zn concentrations. The Zn rates and AA foliar fertilization in soil with did not affect the physiological parameters, nutrient status or yield components. The AA application at the different concentrations tested changed the soybean grain yield and the leaf N concentration. The results suggest that Zn and amino acids application increases the grains Zn concentration in the wheat, being an important strategy to agronomic biofortification.  相似文献   

16.
Glyphosate is a widely used nonselective herbicide for the control of agricultural weeds. It is being increasingly used in glyphosate resistant genetically modified plants. However, there are few studies on its effects on the nutritional status of soybean, particularly on the uptake of zinc (Zn). Two experiments were conducted under field conditions in a Typic Quartzipsamment and an Orthic Ferralsol to investigate the effect of glyphosate application × Zn interaction on soil fertility, yield components, seed yield (SY), shoot dry weight (SDW) yield, and nutritional status of soybean. The five Zn rates 0, 3, 6, 9, and 12 kg ha?1 were used in two soybean varieties [BRS 133 (conventional—NGM) and its essentially derived transgenic line BRS 245RR (GM), which was divided into: with (+Gly) and without (–Gly) glyphosate application. Only the P (phosphorus) and Zn available concentrations in the soil were impacted by Zn rates. However, the available P concentration only decreased in the soil planted with GM soybean. Mehlich 1 and diethylenetriaminepenta acetic acid–triethanolamine (DTPA–TEA), 7.3 extractants were effective to determine the available Zn. In the two crop sites, the number of pods per plant (NPP) and the SDW yield were affected by the interaction varieties × Zn. SY was influenced by the application of the herbicide, reducing a potential phytotoxic effect with the use of high rates. Regarding the nutrients, only the foliar calcium (Ca), boron (B), iron (Fe), and manganese (Mn) concentrations were negatively affected by glyphosate, and in the case of Zn, the difference occurred only between the varieties BRS 133 and BRS 245RR.  相似文献   

17.
Groundnut is an annual legume and important oilseed crop in the world. In order to evaluate the influence of the topping height and application methods of Zinc (Zn) and Calcium (Ca) nano-chelates on quantitative and qualitative characteristics of groundnut, these experiments were carried out during the 2016–2017 cropping seasons on groundnut in Iran. Both foliar and in soil applications of Zn and Ca nano-chelates improved groundnut yield. Foliar application of Zn nano-chelate in combination with topping the main stem 20 cm above the ground produced the highest 100-seed weight (82.19 g), seed yield per unit area (2722.5 kg.h?1), harvest index (57.53%), biological yield (6540.00 kg.h?1), oil yield (1486.76 kg.h?1), protein yield (742.66 kg.h?1), seed Zn content (12.08 ppm) and Ca content (35.86 ppm). The application of Zn nano-chelate had different positive influences on vegetative and reproductive growth of groundnut plants. Generally, optimizing of the nutritional status in groundnut plants with Ca and Zn supplements is recommended to enhance the quantitative and qualitative yield of groundnut.  相似文献   

18.
Liming reduces acidity neutralizes aluminum (Al3+) and manganese (Mn2+) toxicities and increases calcium (Ca2+) and magnesium (Mg2+) concentrations in many acid soils of the world. However, it reduces the availability of other cationic micronutrients that are essential for plant growth. Therefore, an experiment was conducted in greenhouse conditions for assessing the effects of higher lime rates in foliar and grain boron (B), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn) concentrations of 15 soybean genotypes [Glycine max (L) Merrill]. The lime rates were calculated to raise base saturation (V) to 40 and 70%. The soybean genotypes were classified as efficient and moderately efficient in lime-use, the most efficient cultivar was BRS 295RR, and the least efficient was TMG 7161RR and BMX Força RR. The lime rates × genotypes interaction was significant for foliar Cu. The grain the interactions were significant for B, Cu, Fe, and Mn concentrations. Foliar and grain B, Cu, Fe, Mn, and Zn concentrations varied significantly among the genotypes. The Ca and Mg concentrations in the leaf, grain, and soil showed a positive correlation with foliar B concentrations and a negative correlation with leaf and grain Cu, Mn, and Zn concentrations.  相似文献   

19.
Abstract

Soybean [Glycine max(L.) Merrill] is moderately salt tolerant, but the method of irrigation used for crop production under saline conditions may influence the uptake and distribution of potentially toxic salts. This field study was conducted to determine the effects of application of saline waters by different methods, namely, drip and above‐canopy sprinkler irrigation, on the ion relations of soybean cultivar “Manokin”. Salinity was imposed by adding NaCl and CaCl2 (1:1 by weight) to nonsaline irrigation waters. Saline treatments with electrical conductivity (EC i ) of 4 dS m?1 were compared with nonsaline controls (EC i  = 0.5 dS m?1). Ion concentrations in leaves, stems, roots, and when present, pods were determined at four stages of growth: vegetative, flowering, podding, and grain filling. Both Na+ and Cl? were excluded from the Manokin leaves and stems when plants were drip‐irrigated and the uptake of these ions occurred solely via the root pathway. However, when saline water was applied by sprinkling, the ions entered leaves by both foliar absorption and root uptake and their concentrations in the leaves were about 9‐fold higher than in those under saline drip irrigation. Regardless of treatment, leaf‐K was highest during the vegetative stage, then decreased with plant age as K+ was mobilized to meet nutrient demands of the developing reproductive structures.  相似文献   

20.
Foliar application of nickel (Ni) has higher use efficiencies and is preferred over soil application in view of its very low requirement. Pot experiments were conducted during winter season of 2012-2013 and repeated during 2013-2014. Treatments consisted of twelve Ni levels applied as nickel sulphate (NiSO4.7H2O) spray (T1-Ni0%, T2-Ni0.05%, T3-Ni0.1%, T4-Ni0.2%, T5-Ni0.3%, T6-Ni0.4%, T7-Ni0.5%, T8-Ni0.6%, T9-Ni0.7%, T10-Ni0.8%, T11-Ni0.9%,and T12-Ni1.0%,) with recommended doses of fertilizers (RDF) applied in all pots. The result showed that growth and yield attributes viz. plant height, leaf greenness index, number of tillers, number of ears pot-1, number of grains ear-1, straw yield, grain yield and weight of 1000 grains of barley was the maximum with three foliar application of 0.2% of NiSO4.7H2O (T4-Ni0.2%) at 20, 40, and 60 days after sowing (DAS) during both the years. The concentration of Fe, Mn and Zn in grain increased significantly up to T4-Ni0.2% and after this level, a significant decline was recorded during both the years. As regards to the concentration of Ni is concerned, it increased significantly both in grain and straw with increasing levels of Ni spray and the maximum concentration was at T12-Ni1.0%, during both the years. The uptake of Fe, Mn, Cu and Zn in grain of barley increased significantly during both the years up to T4-Ni0.2%,thereafter, it declined significantly with successive increase in dose of Ni spray. Thus 0.2% foliar spray of NiSO4.7H2O significantly increased growth, yield and Fe, Cu, Mn, Zn (micronutrients) status in barley.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号