共查询到20条相似文献，搜索用时 406 毫秒
1.
Koziol K Vilatela J Moisala A Motta M Cunniff P Sennett M Windle A 《Science (New York, N.Y.)》2007,318(5858):1892-1895
With their impressive individual properties, carbon nanotubes should form high-performance fibers. We explored the roles of nanotube length and structure, fiber density, and nanotube orientation in achieving optimum mechanical properties. We found that carbon nanotube fiber, spun directly and continuously from gas phase as an aerogel, combines high strength and high stiffness (axial elastic modulus), with an energy to breakage (toughness) considerably greater than that of any commercial high-strength fiber. Different levels of carbon nanotube orientation, fiber density, and mechanical properties can be achieved by drawing the aerogel at various winding rates. The mechanical data obtained demonstrate the considerable potential of carbon nanotube assemblies in the quest for maximal mechanical performance. The statistical aspects of the mechanical data reveal the deleterious effect of defects and indicate strategies for future work. 相似文献
2.
Cao A Dickrell PL Sawyer WG Ghasemi-Nejhad MN Ajayan PM 《Science (New York, N.Y.)》2005,310(5752):1307-1310
We report that freestanding films of vertically aligned carbon nanotubes exhibit super-compressible foamlike behavior. Under compression, the nanotubes collectively form zigzag buckles that can fully unfold to their original length upon load release. Compared with conventional low-density flexible foams, the nanotube films show much higher compressive strength, recovery rate, and sag factor, and the open-cell nature of the nanotube arrays gives excellent breathability. The nanotube films present a class of open-cell foam structures, consisting of well-arranged one-dimensional units (nanotube struts). The lightweight, highly resilient nanotube films may be useful as compliant and energy-absorbing coatings. 相似文献
3.
Baughman RH 《Science (New York, N.Y.)》2000,290(5495):1310-1311
Nanotube fibers are expected to have a wide range of applications from energy storage to high-strength mechanical devices. But as Baughman explains in his Perspective, methods for making such fibers have been of limited success. In contrast, the process reported by Vigolo et al. shows great promise. Together with a recently reported, more economically viable nanotube production process, this method may open the door to large-scale devices and materials based on carbon nanotubes. 相似文献
4.
By introducing twist during spinning of multiwalled carbon nanotubes from nanotube forests to make multi-ply, torque-stabilized yarns, we achieve yarn strengths greater than 460 megapascals. These yarns deform hysteretically over large strain ranges, reversibly providing up to 48% energy damping, and are nearly as tough as fibers used for bulletproof vests. Unlike ordinary fibers and yarns, these nanotube yarns are not degraded in strength by overhand knotting. They also retain their strength and flexibility after heating in air at 450 degrees C for an hour or when immersed in liquid nitrogen. High creep resistance and high electrical conductivity are observed and are retained after polymer infiltration, which substantially increases yarn strength. 相似文献
5.
Static and dynamic mechanical deflections were electrically induced in cantilevered, multiwalled carbon nanotubes in a transmission electron microscope. The nanotubes were resonantly excited at the fundamental frequency and higher harmonics as revealed by their deflected contours, which correspond closely to those determined for cantilevered elastic beams. The elastic bending modulus as a function of diameter was found to decrease sharply (from about 1 to 0.1 terapascals) with increasing diameter (from 8 to 40 nanometers), which indicates a crossover from a uniform elastic mode to an elastic mode that involves wavelike distortions in the nanotube. The quality factors of the resonances are on the order of 500. The methods developed here have been applied to a nanobalance for nanoscopic particles and also to a Kelvin probe based on nanotubes. 相似文献
6.
Fukushima T Kosaka A Ishimura Y Yamamoto T Takigawa T Ishii N Aida T 《Science (New York, N.Y.)》2003,300(5628):2072-2074
When mixed with imidazolium ion-based room-temperature ionic liquid, pristine single-walled carbon nanotubes formed gels after being ground. The heavily entangled nanotube bundles were found to untangle within the gel to form much finer bundles. Phase transition and rheological properties suggest that the gels are formed by physical cross-linking of the nanotube bundles, mediated by local molecular ordering of the ionic liquids rather than by entanglement of the nanotubes. The gels were thermally stable and did not shrivel, even under reduced pressure resulting from the nonvolatility of the ionic liquids, but they would readily undergo a gel-to-solid transition on absorbent materials. The use of a polymerizable ionic liquid as the gelling medium allows for the fabrication of a highly electroconductive polymer/nanotube composite material, which showed a substantial enhancement in dynamic hardness. 相似文献
7.
The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer ("sword-in-sheath" failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded. Analysis of the stress-strain curves for individual MWCNTs indicated that the Young's modulus E of the outermost layer varied from 270 to 950 gigapascals. Transmission electron microscopic examination of the broken nanotube fragments revealed a variety of structures, such as a nanotube ribbon, a wave pattern, and partial radial collapse. 相似文献
8.
Hata K Futaba DN Mizuno K Namai T Yumura M Iijima S 《Science (New York, N.Y.)》2004,306(5700):1362-1364
We demonstrate the efficient chemical vapor deposition synthesis of single-walled carbon nanotubes where the activity and lifetime of the catalysts are enhanced by water. Water-stimulated enhanced catalytic activity results in massive growth of superdense and vertically aligned nanotube forests with heights up to 2.5 millimeters that can be easily separated from the catalysts, providing nanotube material with carbon purity above 99.98%. Moreover, patterned, highly organized intrinsic nanotube structures were successfully fabricated. The water-assisted synthesis method addresses many critical problems that currently plague carbon nanotube synthesis. 相似文献
9.
Nanoscale electromechanical systems-nanotweezers-based on carbon nanotubes have been developed for manipulation and interrogation of nanostructures. Electrically conducting and mechanically robust carbon nanotubes were attached to independent electrodes fabricated on pulled glass micropipettes. Voltages applied to the electrodes closed and opened the free ends of the nanotubes, and this electromechanical response was simulated quantitatively using known nanotweezer structure and nanotube properties. The mechanical capabilities of the nanotweezers were demonstrated by grabbing and manipulating submicron clusters and nanowires. The conducting nanotube arms of the tweezers were also used for measuring the electrical properties of silicon carbide nanoclusters and gallium arsenide nanowires. 相似文献
10.
Single-molecule fluorescence spectroscopy was used to determine the electronic properties of individual single-walled carbon nanotubes. Carbon nanotube structure was determined simultaneously from Raman spectroscopy. Fluorescence spectra from individual nanotubes with identical structures have different emission energies and linewidths that likely arise from defects or the local environment. Unlike most other molecules studied to date, the fluorescence intensity or spectrum from a single nanotube unexpectedly did not fluctuate. 相似文献
11.
Optical transitions in carbon nanotubes are of central importance for nanotube characterization. They also provide insight into the nature of excited states in these one-dimensional systems. Recent work suggests that light absorption produces strongly correlated electron-hole states in the form of excitons. However, it has been difficult to rule out a simpler model in which resonances arise from the van Hove singularities associated with the one-dimensional band [corrected] structure of the nanotubes. Here, two-photon excitation spectroscopy bolsters the exciton picture. We found binding energies of approximately 400 millielectron volts for semiconducting single-walled nanotubes with 0.8-nanometer diameters. The results demonstrate the dominant role of many-body interactions in the excited-state properties of one-dimensional systems. 相似文献
12.
Self-oriented regular arrays of carbon nanotubes and their field emission properties 总被引：4，自引：0，他引：4
S Fan MG Chapline NR Franklin TW Tombler AM Cassell H Dai 《Science (New York, N.Y.)》1999,283(5401):512-514
The synthesis of massive arrays of monodispersed carbon nanotubes that are self-oriented on patterned porous silicon and plain silicon substrates is reported. The approach involves chemical vapor deposition, catalytic particle size control by substrate design, nanotube positioning by patterning, and nanotube self-assembly for orientation. The mechanisms of nanotube growth and self-orientation are elucidated. The well-ordered nanotubes can be used as electron field emission arrays. Scaling up of the synthesis process should be entirely compatible with the existing semiconductor processes, and should allow the development of nanotube devices integrated into silicon technology. 相似文献
13.
Zhang M Fang S Zakhidov AA Lee SB Aliev AE Williams CD Atkinson KR Baughman RH 《Science (New York, N.Y.)》2005,309(5738):1215-1219
Individual carbon nanotubes are like minute bits of string, and many trillions of these invisible strings must be assembled to make useful macroscopic articles. We demonstrated such assembly at rates above 7 meters per minute by cooperatively rotating carbon nanotubes in vertically oriented nanotube arrays (forests) and made 5-centimeter-wide, meter-long transparent sheets. These self-supporting nanotube sheets are initially formed as a highly anisotropic electronically conducting aerogel that can be densified into strong sheets that are as thin as 50 nanometers. The measured gravimetric strength of orthogonally oriented sheet arrays exceeds that of sheets of high-strength steel. These nanotube sheets have been used in laboratory demonstrations for the microwave bonding of plastics and for making transparent, highly elastomeric electrodes; planar sources of polarized broad-band radiation; conducting appliqués; and flexible organic light-emitting diodes. 相似文献
14.
The combination of their electronic properties and dimensions makes carbon nanotubes ideal building blocks for molecular electronics. However, the advancement of carbon nanotube-based electronics requires assembly strategies that allow their precise localization and interconnection. Using a scheme based on recognition between molecular building blocks, we report the realization of a self-assembled carbon nanotube field-effect transistor operating at room temperature. A DNA scaffold molecule provides the address for precise localization of a semiconducting single-wall carbon nanotube as well as the template for the extended metallic wires contacting it. 相似文献
15.
Carbon nanotube quantum resistors 总被引：1，自引：0，他引：1
The conductance of multiwalled carbon nanotubes (MWNTs) was found to be quantized. The experimental method involved measuring the conductance of nanotubes by replacing the tip of a scanning probe microscope with a nanotube fiber, which could be lowered into a liquid metal to establish a gentle electrical contact with a nanotube at the tip of the fiber. The conductance of arc-produced MWNTs is one unit of the conductance quantum G0 = 2e2/h = (12.9 kilohms)-1. The nanotubes conduct current ballistically and do not dissipate heat. The nanotubes, which are typically 15 nanometers wide and 4 micrometers long, are several orders of magnitude greater in size and stability than other typical room-temperature quantum conductors. Extremely high stable current densities, J > 10(7) amperes per square centimeter, have been attained. 相似文献
16.
Fuhrer MS Nygard J Shih L Forero M Yoon YG Mazzoni MS Choi HJ Ihm J Louie SG Zettl A McEuen PL 《Science (New York, N.Y.)》2000,288(5465):494-497
Junctions consisting of two crossed single-walled carbon nanotubes were fabricated with electrical contacts at each end of each nanotube. The individual nanotubes were identified as metallic (M) or semiconducting (S), based on their two-terminal conductances; MM, MS, and SS four-terminal devices were studied. The MM and SS junctions had high conductances, on the order of 0.1 e(2)/h (where e is the electron charge and h is Planck's constant). For an MS junction, the semiconducting nanotube was depleted at the junction by the metallic nanotube, forming a rectifying Schottky barrier. We used two- and three-terminal experiments to fully characterize this junction. 相似文献
17.
We demonstrate reversible wetting and filling of open single-wall carbon nanotubes with mercury by means of electrocapillary pressure originating from the application of a potential across an individual nanotube in contact with a mercury drop. Wetting improves the conductance in both metallic and semiconducting nanotube probes by decreasing contact resistance and forming a mercury nanowire inside the nanotube. Molecular dynamics simulations corroborate the electrocapillarity-driven filling process and provide estimates for the imbibition speed and electrocapillary pressure. 相似文献
18.
Hill JP Jin W Kosaka A Fukushima T Ichihara H Shimomura T Ito K Hashizume T Ishii N Aida T 《Science (New York, N.Y.)》2004,304(5676):1481-1483
An amphiphilic hexa-peri-hexabenzocoronene self-assembles to form a pi-electronic, discrete nanotubular object. The object is characterized by an aspect ratio greater than 1000 and has a uniform, 14-nanometer-wide, open-ended hollow space, which is an order of magnitude larger than those of carbon nanotubes. The wall is 3 nanometers thick and consists of helical arrays of the pi-stacked graphene molecule, whose exterior and interior surfaces are covered by hydrophilic triethylene glycol chains. The graphitic nanotube is redox active, and a single piece of the nanotube across 180-nanometer-gap electrodes shows, upon oxidation, an electrical resistance of 2.5 megohms at 285 kelvin [corrected]. This family of molecularly engineered graphite with a one-dimensional tubular shape and a chemically accessible surface constitutes an important step toward molecular electronics. 相似文献
19.
The uncatalyzed edge growth of carbon nanotubes was investigated by first-principles molecular dynamics simulations. At experimental temperatures the open end of single-walled nanotubes closed spontaneously into a graphitic dome, which may explain why these nanotubes do not grow in the absence of transition metal catalysts. On the other hand, chemical bonding between the edges of adjacent coaxial tubes ("lip-lip" interactions) trapped the end of a double-walled nanotube in a metastable energy minimum, thus preventing dome closure. These calculations show that this end geometry exhibits a high degree of chemical activity and easily accommodates incoming carbon fragments, supporting a model of growth by chemisorption from the vapor phase. 相似文献
20.
Rinzler AG Hafner JH Nikolaev P Nordlander P Colbert DT Smalley RE Lou L Kim SG Tománek D 《Science (New York, N.Y.)》1995,269(5230):1550-1553
Field emission of electrons from individually mounted carbon nanotubes has been found to be dramatically enhanced when the nanotube tips are opened by laser evaporation or oxidative etching. Emission currents of 0.1 to 1 microampere were readily obtained at room temperature with bias voltages of less than 80 volts. The emitting structures are concluded to be linear chains of carbon atoms, Cn, (n = 10 to 100), pulled out from the open edges of the graphene wall layers of the nanotube by the force of the electric field, in a process that resembles unraveling the sleeve of a sweater. 相似文献