首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
南方型杨树人工林最适经营密度的研究   总被引:2,自引:1,他引:2  
针对湖北省南方型杨树人工林的现实特点,根据31块详细样地资料,以密度二次效应模型为基础,利用动态规划方法,对南方型杨树人工林的最适经营密度进行了探讨,同时,在兼顾单株营养面积和群众栽培习惯,以及造林可操作性的前提下,提出了适合于南方型杨树人工林在不同立地条件下的造林株行距,可为造林施工、林分抚育间伐和综合经营提供科学依据。  相似文献   

2.
为了提高退耕还林地经营杨树人工林的经济和生态效益,比较了两种经营措施对南方退耕还林地杨树人工林生长的影响,结果表明:杨树人工林林农间作显著促进杨树的生长,连续间作2 a后,其胸径、树高和蓄积量比对照分别增加5.8%、56.1%、130.7%。密度对南方退耕还林地3 a生杨树蓄积量有显著的影响,蓄积量最大值是最小值的4.15倍。  相似文献   

3.
杨树是我省西部平原地区的主要造林树种,为了解决杨树人工林经营密度问题,本文采用数理统计方法对5~11年生的杨树人工林胸径、冠幅面积之间的关系进行了系统的分析,并提出了杨树人工林合理经营密度表。为杨树人工林的抚育间伐提供了依据。  相似文献   

4.
南方型杨树工业用材林的资源培育   总被引:10,自引:1,他引:9  
介绍了南方型杨树产业化发展的市场背景以及南方型杨树的品种改良、农林复合经营、定向培育技术,并对我国杨树产业化经营提出了良好的建设。  相似文献   

5.
对南方型杨树的主栽无性系I-63杨、I-69杨、I-72杨的直径生长过程进行了差异性检验,结果3个无性系的平均相对误差分别为0.34%、-3.89%和4.23%,直径生长过程表现出良好的相似性。采用不分无性系的混合建模方法建立了南方型杨树人工林断面积直径预估模型-Dg=0.968 1H01.361 4N-0.032H00.540 2,从而得到林分断面积预估模型G=0.000 073 607N02.722 8N1-0.064H00.540 2。  相似文献   

6.
湖北省南方型杨树人工林立地指数表的编制   总被引:3,自引:0,他引:3  
根据全省杨树主栽品种混系造林的生产实际以及南方型杨树品种(品系)间高生长过程的相似性,利用31块标准地优势木树干解析资料,把方程lgH=0.730+0.6011lgA作为导向曲线数学模型,编制了湖北省南方型杨树立地指数表。该表对于指导杨树的分类经营、定向培育,以及配套经营技术的研究与开发具有重要意义,同时,对于树高生长过程与南方型杨树相似的其它杨树品种(品系)也可参考使用。  相似文献   

7.
在安徽沿江、江淮、淮北调查139块不同立地条件、不同林龄具有代表性的南方型杨树人工林标准地。根据各林分优势木材料,选用公式H=0.11918+3.1502A-0.09059A-2作为树高导向曲线数学模型,编制了安徽省杨树人工林立地指数表。该表对我省杨树定向培育、丰产栽培、生长预测等具有重要指导意义。  相似文献   

8.
在安徽沿江、江淮、淮北调查139块不同立地条件、不同林龄具有代表性的南方型杨树人工林标准地。根据各林分优势木材料,选用公式H=0.11918+3.1502A-0.09059A2作为树高导向曲线数学模型,编制了安徽省杨树人工林立地指数表。该表对我省杨树定向培育、丰产栽培、生长预测等具有重要指导意义。  相似文献   

9.
安徽沿江洲滩地杨树人工林立地指数表的编制   总被引:2,自引:0,他引:2  
在安徽沿江洲滩地调查57块不同立地条件、不同林龄具有代表性的南方型杨树人工林标准地.根据各林分优势木材料,选用公式H=0.374 155 3.037 824A-0.091 17A2作为树高导向曲线数学模型,编制了安徽省沿江洲滩地杨树人工林立地指数表.该表对安徽省沿江地区杨树定向培育、丰产栽培、生长预测等具有重要指导意义.  相似文献   

10.
为了探究江苏杨树人工林碳储量分布情况,利用2010年江苏省森林资源清查主要数据,分析了江苏杨树人工林空间分布格局以及碳储量、碳密度与区域社会经济状况之间的相关性。结果显示:江苏杨树人工林碳储量区域差异大;国民生产总值与碳储量间的相关关系说明,随着社会经济条件的增长,人工林碳汇能力迅速下降,经济发达地区对于人工林碳汇贡献很低;各地区林业生产总值与碳密度间的相关关系说明,林业生产总值较低和较高的地区杨树人工林碳密度都偏低。建议通过建立完善的区域及行业间生态补偿机制和更科学的森林经营措施保障杨树人工林可持续发展。  相似文献   

11.

In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads.  相似文献   

12.

The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage.  相似文献   

13.
Contour hedgerows of multipurpose tree species in the sloping tea lands of Sri Lanka are expected to reduce soil erosion and also add significant amounts of plant nutrients to the soil via periodic prunings. The objective of this experiment was to characterize the biomass decomposition pattern and quantify the amount of nutrients added through prunings of six tree species (Calliandra calothyrsus, Senna spectabilis, Euphatorium innulifolium, Flemingia congesta, Gliricidia sepium and Tithonia diversifolia) currently being used in hedgerows associated with tea. Withered leaf and stem prunings (50 g) were enclosed in 2-mm litter bags, placed at 5-cm depth and retrieved after one, three, six, nine and 12 weeks. Loss of initial dry weight, N, P and K was measured. Single exponential decay function adequately described both dry weight and nutrient loss. Tree species differed significantly in their rate of breakdown with decomposition constants (k) varying from 0.0299 to 0.2006 week−1 for leaves and from 0.0225 to 0.0633 week−1 for stems. Gliricidia showed the highest k for leaves with the rest in the following descending order: Senna > TithoniaEuphatorium > Calliandra > Flemingia. A similar pattern was observed for loss of all nutrients with Calliandra and Flemingia always having lower k values than the rest. Although N immobilization was not observed, immobilization of P and K was observed during the first week of incubation in some species, particularly in stem prunings. Annual biomass of prunings differed significantly between tree species in the following descending order: Calliandra > Senna > Flemingia > Tithonia > Gliricidia > Euphatorium. Calliandra added the greatest amount of nutrients annually to the soil with Euphatorium adding the least. Calliandra prunings provided the annual total K requirement and 49% of the N requirement of mature tea. However, none of the species provided more than 5% of the P requirement. It is concluded that among the tree species tested, Calliandra and Flemingia are the most suitable for contour hedgerows in tea plantations of this agroclimatic region because of their higher soil nutrient enrichment capacity and slower decomposition rates which would minimize leaching losses. This revised version was published online in June 2006 with corrections to the Cover Date.  相似文献   

14.

The effects of seed weight and seed type on seedling growth of Pinus sylvestris (L.) were studied by seeding individually weighed orchard and stand seed in different mixtures under harsh (direct seeding in field) and optimal (seeding in nursery) conditions. In the nursery experiment an increase in the seed weight from 3 to 7 mg increased the seedling height by 10-27% and total weight by 27-113%, and decreased the height/diameter ratio by 5-6% after 2 yrs. With elimination of seed weight effects, orchard seedlings were 2% taller than stand seedlings in year 2. Without elimination of seed weight effects, orchard seedlings were 7-13% taller. In the field experiment an increase in the seed weight from 3 to 7 mg increased seedling height by 18-65%, stem volume by 81-274% and the number of top-buds by 23-34% in year 5. After elimination of seed weight effects, orchard seedlings were 7-13% taller than stand seedlings and without elimination of seed weight effects 20-21% taller after 5 yrs. Even after elimination of both seed weight and genetic effects orchard seedlings were 3-9% larger than stand seedlings in the field experiment. In conclusion, the influence of seed weight and seed type on growth traits and slenderness is highly significant and the influence seems to be greater in harsh conditions.  相似文献   

15.
Abstract

Wood in general and wooden studs in particular are often distorted owing to uneven shrinkage during the drying process in the sawmill. Twist is often the most detrimental of all types of distortion, and it is caused by spiral grain in combination with variations in moisture content. For sawmills, the objective is to produce dried, straight boards, and one method of dealing with boards with excessive spiral grain is to sort them out and then dry them in a pretwisted position to obtain straight boards after drying. A model using the finite element (FE) method for the simulation of drying twist distortions was first calibrated against laboratory experiments in which boards were dried with and without restraints and pretwists. After the calibration, the FE results were compared with industrial test results for boards that were dried without restraints or with restraints with zero pretwist, i.e. straight restraints. The FE model used an elastic–ideally plastic material model to obtain permanent deformations. The calibration was to set the yield stresses so that there was a good match between FE results and results from the laboratory experiments. The comparison between the industrial test results and the FE results showed that the FE model is capable of realistic simulations of drying boards with and without restraints and presumably also pretwists.  相似文献   

16.
Baobab leaves form an important part of the local diet in Sahel countries and elsewhere in Africa. Existing leaf nutritional data and agroforestry performance information are based solely on Adansonia digitata L., the baobab of continental Africa. The introduction potential of Adansonia species from the center of diversity in Madagascar and from Australia remains untapped. To assess this potential, the mineral contents and B1 and B2 vitamin levels of dried baobab leaves were determined for five-year old trees of A. digitata, A. gibbosa (A. Cunn.) Guymer ex D. Baum, A. rubrostipa Jum. & H. Perrier (syn. A. fony Baill.), A. perrieri Capuron and A. za Baill. grown in an introduction trial in Mali. Nutritional data were evaluated against survival and vigor to identify promising germplasm. Leaf vitamin and crude protein contents were highest in the Madagascar species, especially A. rubrostipa (B1 88 mg 100 g−1, B2 187 mg 100 g−1, protein 20.7% dry weight). However, the local species far outperformed the introductions in survival, tree height, basal diameter and resistance to termites. We suggest grafting as a way of harnessing the vigor of well-adapted local baobab varieties to the superior nutritional profiles of A. rubrostipa and others. Cross-species grafting tests in Adansonia were successful, thus creating new agroforestry possibilities with different scion/rootstock combinations.  相似文献   

17.
Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered.  相似文献   

18.

This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland.  相似文献   

19.

The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions.  相似文献   

20.
本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号