共查询到20条相似文献，搜索用时 561 毫秒
1.
《Science (New York, N.Y.)》1994,266(5184):389-397
The most costly American earthquake since 1906 struck Los Angeles on 17 January 1994. The magnitude 6.7 Northridge earthquake resulted from more than 3 meters of reverse slip on a 15-kilometer-long south-dipping thrust fault that raised the Santa Susana mountains by as much as 70 centimeters. The fault appears to be truncated by the fault that broke in the 1971 San Fernando earthquake at a depth of 8 kilometers. Of these two events, the Northridge earthquake caused many times more damage, primarily because its causative fault is directly under the city. Many types of structures were damaged, but the fracture of welds in steel-frame buildings was the greatest surprise. The Northridge earthquake emphasizes the hazard posed to Los Angeles by concealed thrust faults and the potential for strong ground shaking in moderate earthquakes. 相似文献
2.
Crustal extension and formation of the Mineral Mountains core complex, Utah, involved tilting of the Mineral Mountains batholith and associated faults during hanging wall and footwall deformation. The batholith was folded in the hanging wall of the Beaver Valley fault between 11 and 9 million years ago yielding about 45 degrees of tilt. Subsequently, the batholith was unroofed along the Cave Canyon detachment fault, and the batholith and fault were tilted approximately 40 degrees during footwall uplift. Recognition of deformed dikes beneath the detachment fault establishes the importance of footwall tilt during formation of extensional core complexes and demonstrates that footwall rebound can be an important process during extension. 相似文献
3.
The cape mendocino, california, earthquakes of april 1992: subduction at the triple junction 总被引：1，自引：0，他引：1
Oppenheimer D Eaton J Jayko A Lisowski M Marshall G Murray M Simpson R Stein R Beroza G Magee M Carver G Dengler L McPherson R Gee L Romanowicz B Gonzalez F Li WH Satake K Somerville P Valentine D 《Science (New York, N.Y.)》1993,261(5120):433-438
The 25 April 1992 magnitude 7.1 Cape Mendocino thrust earthquake demonstrated that the North America-Gorda plate boundary is seismogenic and illustrated hazards that could result from much larger earthquakes forecast for the Cascadia region. The shock occurred just north of the Mendocino Triple Junction and caused strong ground motion and moderate damage in the immediate area. Rupture initiated onshore at a depth of 10.5 kilometers and propagated up-dip and seaward. Slip on steep faults in the Gorda plate generated two magnitude 6.6 aftershocks on 26 April. The main shock did not produce surface rupture on land but caused coastal uplift and a tsunami. The emerging picture of seismicity and faulting at the triple junction suggests that the region is likely to continue experiencing significant seismicity. 相似文献
4.
Convergence across the San Andreas fault (SAF) system is partitioned between strike-slip motion on the vertical SAF and oblique-slip motion on parallel dip-slip faults, as illustrated by the recent magnitude M(s) = 6.0 Palm Springs, M(s) = 6.7 Coalinga, and M(s) = 7.1 Loma Prieta earthquakes. If the partitioning of slip minimizes the work done against friction, the direction of slip during these recent earthquakes depends primarily on fault dip and indicates that the normal stress coefficient and frictional coefficient (micro) vary among the faults. Additionally, accounting for the active dip-slip faults reduces estimates of fault slip rates along the vertical trace of the SAF by about 50 percent in the Loma Prieta and 100 percent in the North Palm Springs segments. 相似文献
5.
We combined precise focal depths and fault plane solutions of more than 40 events from the 20 September 1999 Chi-Chi earthquake sequence with a synthesis of subsurface geology to show that the dominant structure for generating earthquakes in central Taiwan is a moderately dipping (20 degrees to 30 degrees ) thrust fault away from the deformation front. A second, subparallel seismic zone lies about 15 kilometers below the main thrust. These seismic zones differ from previous models, indicating that both the basal decollement and relic normal faults are aseismic. 相似文献
6.
Relations among fault behavior, subsurface geology, and three-dimensional velocity models 总被引：2，自引：0，他引：2
The development of three-dimensional P-wave velocity models for the regions surrounding five large earthquakes in California has lead to the recognition of relations among fault behavior and the material properties of the rocks that contact the fault at seismogenic depths; regions of high moment release appear to correlate with high seismic velocities whereas rupture initiation or termination may be associated with lower seismic velocities. These relations point toward a physical understanding of why faults are divided into segments that can fail independently, an understanding that could improve our ability to predict earthquakes and strong ground motion. 相似文献
7.
Moore GF Bangs NL Taira A Kuramoto S Pangborn E Tobin HJ 《Science (New York, N.Y.)》2007,318(5853):1128-1131
Megasplay faults, very long thrust faults that rise from the subduction plate boundary megathrust and intersect the sea floor at the landward edge of the accretionary prism, are thought to play a role in tsunami genesis. We imaged a megasplay thrust system along the Nankai Trough in three dimensions, which allowed us to map the splay fault geometry and its lateral continuity. The megasplay is continuous from the main plate interface fault upwards to the sea floor, where it cuts older thrust slices of the frontal accretionary prism. The thrust geometry and evidence of large-scale slumping of surficial sediments show that the fault is active and that the activity has evolved toward the landward direction with time, contrary to the usual seaward progression of accretionary thrusts. The megasplay fault has progressively steepened, substantially increasing the potential for vertical uplift of the sea floor with slip. We conclude that slip on the megasplay fault most likely contributed to generating devastating historic tsunamis, such as the 1944 moment magnitude 8.1 Tonankai event, and it is this geometry that makes this margin and others like it particularly prone to tsunami genesis. 相似文献
8.
Oblique motion along tectonic boundaries is commonly partitioned into slip on faults with different senses of motion. The origin of slip partitioning is important to structural geology, tectonophysics, and earthquake mechanics. Partitioning can be explained by the upward elastoplastic propagation of oblique slip from a fault or shear zone at depth. The strain field ahead of the propagating fault separates into zones of predominantly normal, reverse, and strike-slip faulting. The model successfully predicts the distribution of fault types along parts of the San Andreas and Haiyuan faults. 相似文献
9.
Seismic potential revealed by surface folding: 1983 coalinga, california, earthquake 总被引：2，自引：0，他引：2
The 2 May 1983 Coalinga, California, earthquake (magnitude 6.5) failed to rupture through surface deposits and, instead, elastically folded the top few kilometers of the crust. The subsurface rate of fault slip and the earthquake repeat time are estimated from seismic, geodetic, and geologic data. Three larger earthquakes (up to magnitude 7.5) during the past 20 years are also shown to have struck on reverse faults concealed beneath active folds. 相似文献
10.
Recent studies show that earthquake faults may rupture at speeds exceeding the shear wave velocity of rocks. This supershear rupture produces in the ground a seismic shock wave similar to the sonic boom produced by a supersonic airplane. This shock wave may increase the destruction caused by the earthquake. We report that supershear earthquakes are characterized by a specific pattern of aftershocks: The fault plane itself is remarkably quiet whereas aftershocks cluster off the fault, on secondary structures that are activated by the supershear rupture. The post-earthquake quiescence of the fault shows that friction is relatively uniform over supershear segments, whereas the activation of off-fault structures is explained by the shock wave radiation, which produces high stresses over a wide zone surrounding the fault. 相似文献
11.
The 1.1-megaton nuclear test Benham caused movement on previously mapped faults and was followed by a sequence of small earthquakes. These effects were confined to a zone extending not more than 13 kilometers from ground zero; they are apparently related to the release of natural tectonic strain. 相似文献
12.
Periodically triggered seismicity at Mount Wrangell, Alaska, after the Sumatra earthquake 总被引：3，自引：0，他引：3
As surface waves from the 26 December 2004 earthquake in Sumatra swept across Alaska, they triggered an 11-minute swarm of 14 local earthquakes near Mount Wrangell, almost 11,000 kilometers away. Earthquakes occurred at intervals of 20 to 30 seconds, in phase with the largest positive vertical ground displacements during the Rayleigh surface waves. We were able to observe this correlation because of the combination of unusually long surface waves and seismic stations near the local earthquakes. This phase of Rayleigh wave motion was dominated by horizontal extensional stresses reaching 25 kilopascals. These observations imply that local events were triggered by simple shear failure on normal faults. 相似文献
13.
Plafker G 《Science (New York, N.Y.)》1976,193(4259):1201-1208
The locations of surface ruptures and the main shock epicenter indicate that the disastrous Guatemala earthquake of 4 February 1976 was tectonic in origin and generated mainly by slip on the Motagua fault, which has an arcuate roughly east-west trend across central Guatemala. Fault breakage was observed for 230 km. Displacement is predominantly horizontal and sinistral with a maximum measured offset of 340 cm and an average of about 100 cm. Secondary fault breaks trending roughly north-northeast to south-southwest have been found in a zone about 20 km long and 8 km wide extending from the western suburbs of Guatemala City to near Mixco, and similar faults with more subtle surface expression probably occur elsewhere in the Guatemalan Highlands. Displacements on the secondary faults are predominantly extensional and dip-slip, with as much as 15 cm vertical offset on a single fracture. The primary fault that broke during the earthquake involved roughly 10 percent of the length of the great transform fault system that defines the boundary between the Caribbean and North American plates. The observed sinistral displacement is striking confirmation of deductions regarding the late Cenozoic relative motion between these two crustal plates that were based largely on indirect geologic and geophysical evidence. The earthquake-related secondary faulting, together with the complex pattern of geologically young normal faults that occur in the Guatemalan Highlands and elsewhere in western Central America, suggest that the eastern wedge-shaped part of the Caribbean plate, roughly between the Motagua fault system and the volcanic arc, is being pulled apart in tension and left behind as the main mass of the plate moves relatively eastward. Because of their proximity to areas of high population density, shallow-focus earthquakes that originate on the Motagua fault system, on the system of predominantly extensional faults within the western part of the Caribbean plate, and in association with volcanism may pose a more serious seismic hazard than the more numerous (but generally more distant) earthquakes that are generated in the eastward-dipping subduction zone beneath Middle America. 相似文献
14.
Di Toro G Hirose T Nielsen S Pennacchioni G Shimamoto T 《Science (New York, N.Y.)》2006,311(5761):647-649
Melt produced by friction during earthquakes may act either as a coseismic fault lubricant or as a viscous brake. Here we estimate the dynamic shear resistance (tau(f)) in the presence of friction-induced melts from both exhumed faults and high-velocity (1.28 meters per second) frictional experiments. Exhumed faults within granitoids (tonalites) indicate low tau(f) at 10 kilometers in depth. Friction experiments on tonalite samples show that tau(f) depends weakly on normal stress. Extrapolation of experimental data yields tau(f) values consistent with the field estimates and well below the Byerlee strength. We conclude that friction-induced melts can lubricate faults at intermediate crustal depths. 相似文献
15.
The maximum size of thrust earthquakes at the world's subduction zones appears to be limited by anelastic deformation of the overriding plate. Anelastic strain in weak forearcs and roughness of the plate interface produced by faults cutting the forearc may limit the size of thrust earthquakes by inhibiting the buildup of elastic strain energy or slip propagation or both. Recently discovered active strike-slip faults in the submarine forearc of the Cascadia subduction zone show that the upper plate there deforms rapidly in response to arc-parallel shear. Thus, Cascadia, as a result of its weak, deforming upper plate, may be the type of subduction zone at which great (moment magnitude approximately 9) thrust earthquakes do not occur. 相似文献
16.
Hauksson E Jones LM Davis TL Hutton LK Williams P Bent AL Brady AG Reasenberg PA Michael AJ Yerkes RF Etheredge E Porcella RL Johnston MJ Reagor G Stover CW Bufe CG Cranswick E Shakal AK 《Science (New York, N.Y.)》1988,239(4846):1409-1412
The Whittier Narrows earthquake sequence (local magnitude, M(L) = 5.9), which caused over $358-million damage, indicates that assessments of earthquake hazards in the Los Angeles metropolitan area may be underestimated. The sequence ruptured a previously unidentified thrust fault that may be part of a large system of thrust faults that extends across the entire east-west length of the northern margin of the Los Angeles basin. Peak horizontal accelerations from the main shock, which were measured at ground level and in structures, were as high as 0.6g (where g is the acceleration of gravity at sea level) within 50 kilometers of the epicenter. The distribution of the modified Mercalli intensity VII reflects a broad north-south elongated zone of damage that is approximately centered on the main shock epicenter. 相似文献
17.
Ground shaking close to the causative fault of an earthquake is more intense than it was previously believed to be. This raises the possibility that large numbers of buildings and other structures are not sufficiently resistant for the intense levels of shaking that can occur close to the fault. Many structures were built before earthquake codes were adopted; others were built according to codes formulated when less was known about the intensity of near-fault shaking. Although many building types are more resistant than conventional design analyses imply, the margin of safety is difficult to quantify. Many modern structures, such as freeways, have not been subjected to and tested by near-fault shaking in major earthquakes (magnitude 7 or greater). Damage patterns in recent moderate-sized earthquakes occurring in or adjacent to urbanized areas (17), however, indicate that many structures, including some modern ones designed to meet earthquake code requirements, cannot withstand the severe shaking that can occur close to a fault. It is necessary to review the ground motion assumed and the methods utilized in the design of important existing structures and, if necessary, to strengthen or modify the use of structures that are found to be weak. New structures situated close to active faults should be designed on the basis of ground motion estimates greater than those used in the past. The ultimate balance between risk of earthquake losses and cost for both remedial strengthening and improved earthquake-resistant construction must be decided by the public. Scientists and engineers must inform the public about earthquake shaking and its effect on structures. The exposure to damage from seismic shaking is steadily increasing because of continuing urbanization and the increasing complexity of lifeline systems, such as power, water, transportation, and communication systems. In the near future we should expect additional painful examples of the damage potential of moderate-sized earthquakes in urban areas. Over a longer time span, however, we can significantly reduce the risk to life and property from seismic shaking through better land utilization, improved building codes and construction practices, and at least the gradual replacement of poor buildings by more resistant buildings. Progress toward reducing risk from seismic shaking through better building design is slowed by deficiencies in our knowledge about the nature of damaging ground motion and the failure mechanisms in structures. For example, lacking observational data, seismologists must rely on simplified theoretical and numerical models of the earthquake process to estimate near-fault ground motion, especially for earthquakes as large as magnitude 7 and 8. Because such models have not been adequately tested against data, their reliability is unknown. Engineers lack detailed information about failure processes in structures during an earthquake. Although many structures have been instrumented to measure their response to an earthquake, few records have been obtained from buildings that actually sustained significant structural damage and few structures are properly instrumented to measure all the modes of deformation that are likely to contribute to failure. Moreover, the fact that many structures have withstood ground motion more intense than that assumed in their design indicates that conventional methods of design do not take into account important contributions to earthquake resistance by nonstructural elements and by the ability of structural elements to deform inelastically without necessarily causing failure of the structure. It is fortunate when such reserve resistance exists, but better understanding of the sources of reserve strength is needed to determine how large a margin of safety they confer and how they might be affected by changes in construction practices and materials with time. In the next few years we look forward to significant advances in knowledge and to more effective application of what is already known, largely because of substantial funding of research related to seismic engineering by the National Science Foundation (18). The increasing number of strong-motion seismographs operating in seismically active regions (19) will likely provide for the first time a number of records of damaging levels of ground motion. Significant effort is being directed toward obtaining near-fault records, although many probable sites of future large earthquakes remain inadequately instrumented, especially outside the conterminous United States. New and more complete information on building response and damage mechanisms will be obtained by improved instrumentation of structures and through laboratory investigations of failure in structures and structural elements. Further developments in computer technology and in computer modeling techniques will permit more realistic simulations of the seismic response of soils and structures that take into account their inelastic behavior and their strain-dependent properties. Earthquake design codes will continually be revised to better utilize existing knowledge concerning the nature of strong ground motion and the dynamic behavior of buildings during earthquakes and to incorporate new knowledge and also experiences gained from future earthquakes. We believe that application of new knowledge, improvements in earthquake-resistant design and construction, and remedial strengthening or replacement of weak existing structures can significantly reduce our current level of exposure to earthquake hazards. 相似文献
18.
Zoback MD Zoback ML Mount VS Suppe J Eaton JP Healy JH Oppenheimer D Reasenberg P Jones L Raleigh CB Wong IG Scotti O Wentworth C 《Science (New York, N.Y.)》1987,238(4830):1105-1111
Contemporary in situ tectonic stress indicators along the San Andreas fault system in central California show northeast-directed horizontal compression that is nearly perpendicular to the strike of the fault. Such compression explains recent uplift of the Coast Ranges and the numerous active reverse faults and folds that trend nearly parallel to the San Andreas and that are otherwise unexplainable in terms of strike-slip deformation. Fault-normal crustal compression in central California is proposed to result from the extremely low shear strength of the San Andreas and the slightly convergent relative motion between the Pacific and North American plates. Preliminary in situ stress data from the Cajon Pass scientific drill hole (located 3.6 kilometers northeast of the San Andreas in southern California near San Bernardino, California) are also consistent with a weak fault, as they show no right-lateral shear stress at approximately 2-kilometer depth on planes parallel to the San Andreas fault. 相似文献
19.
High-velocity weakening of faults may drive fault motion during large earthquakes. Experiments on simulated faults in Carrara marble at slip rates up to 1.3 meters per second demonstrate that thermal decomposition of calcite due to frictional heating induces pronounced fault weakening with steady-state friction coefficients as low as 0.06. Decomposition produces particles of tens of nanometers in size, and the ultralow friction appears to be associated with the flash heating on an ultrafine decomposition product. Thus, thermal decomposition may be an important process for the dynamic weakening of faults. 相似文献
20.
Response of regional seismicity to the static stress change produced by the loma prieta earthquake 总被引：11，自引：0，他引：11
The 1989 Loma Prieta, California, earthquake perturbed the static stress field over a large area of central California. The pattern of stress changes on major faults in the region predicted by models of the earthquake's dislocation agrees closely with changes in the regional seismicity rate after the earthquake. The agreement is best for models with low values of the coefficient of friction (0.1 相似文献