首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Differential scanning calorimetry (DSC) was used to study the effect of sucrose on wheat starch glass transition, gelatinization, and retrogradation. As the ratio of sucrose to starch increased from 0.25:1 to 1:1, the glass transition temperature (Tg, Tg′) and ice melting enthalpy (ΔHice) of wheat starch‐sucrose mixtures (with total moistures of 40–60%) were decreased to a range of −7 to −20°C and increased to a range of 29.4 to 413.4 J/g of starch, respectively, in comparison with wheat starch with no sucrose. The Tg′ of the wheat starch‐sucrose mixtures was sensitive to the amount of added sucrose, and detection was possible only under conditions of excess total moisture of >40%. The peak temperature (Tm) and enthalpy value (ΔHG) for gelatinization of starch‐sucrose systems within the total moisture range of 40–60% were increased with increasing sucrose and were greater at lower total moisture levels. The Tg′ of the starch‐sucrose system increased during storage. In particular, the significant shift in Tg′ ranged between 15 and 18°C for a 1:1 starch‐sucrose system (total moisture 50%) after one week of storage at various temperatures (4, 32, and 40°C). At 40% total moisture, samples with sucrose stored at 4, 32, and 40°C for four weeks had higher retrogradation enthalpy (ΔH) values than a sample with no sucrose. At 50 and 60% total moisture, there were small increases in ΔH values at storage temperature of 4°C, whereas recrystallization of samples with sucrose stored at 32 and 40°C decreased. The peak temperature (Tp), peak width (δT), and enthalpy (ΔH) for the retrogradation endotherm of wheat starch‐sucrose systems (1:0.25, 1:0.5, and 1:1) at the same total moisture and storage temperature showed notable differences with the ratio of added sucrose. In addition, Tp increased at the higher storage temperature, while δT increased at the lower storage temperature. This suggests that the recrystallization of the wheat starch‐sucrose system at various storage temperatures can be interpreted in terms of δT and Tp.  相似文献   

2.
The effect of moisture content (MC) on the glass transition temperature (Tg) of individual brown rice kernels of Bengal, a medium‐grain cultivar, and Cypress, a long‐grain cultivar, was studied. Three methods were investigated for measuring Tg: differential scanning calorimetry (DSC), thermomechanical analysis (TMA), and dynamic mechanical analysis (DMA). Among these methods, TMA was chosen, because it can also measure changes in the thermal volumetric coefficient (β) of the kernel during glass transition. TMA‐measured Tg at similar MC levels for both cultivars were not significantly different and were combined to generate a brown rice state diagram. Individual kernel Tg for both cultivars increased from 22 to 58°C as MC decreased from 27 to 3% wb. Linear and sigmoid models were derived to relate Tg to MC. The linear model was sufficient to describe the property changes in the MC range encountered during rice drying. Mean β values across both cultivars in the rubbery state was 4.62 × 10‐4/°C and was higher than the mean β value of 0.87 × 10‐4/°C in the glassy state. A hypothetical rice drying process was mapped onto the combined state diagram generated for Bengal and Cypress.  相似文献   

3.
A series of cross‐linked hydroxypropylated corn starches were extruded with a Leistritz micro‐18 co‐rotating extruder. Extrusion process variables including moisture (30, 35, and 40%), barrel temperature (60, 80, and 100°C), and screw design (low, medium, and high shear) were investigated. Scanning electron microscopy (SEM) of extruded starches showed a gel phase with distorted granules and granule fragments after extrusion at 60°C. After extrusion at 100°C only a gel phase was observed with no granular structures remaining. High performance size exclusion chromatography (HPSEC) equipped with multiangle laser light‐scattering (MALLS) and refractive index (RI) detectors showed extruded starches degraded to different extents, depending on extrusion conditions. The average molecular weight of the amylopectin of unextruded native corn starch was 7.7 × 108. Extrusion at 30% moisture, 100°C, and high shear reduced the molecular weight of amylopectin to 1.0 × 108. Hydroxypropylated normal corn starch extruded at identical conditions showed greater decreases in amylopectin molecular weight. With the addition of cross‐linking, the amylopectin fractions of the extruded starches were less degraded than those of their native and hydroxypropylated corn starch counterparts. Similarly, increasing moisture content during extrusion lowered amylopectin degradation in the extruded starches. Increasing temperature during extrusion of cross‐linked hydroxypropylated starches at high moisture content (e.g., 40%) lowered amylopectin molecular weights of the extruded starches, whereas increasing extrusion temperature at low moisture content (30%) resulted in less degraded molecules. This difference was attributed to the higher glass transition temperatures of the cross‐linked starches.  相似文献   

4.
Processing conditions similar to traditional nixtamalization are now used by the industry in the production of dry maize flours (DMF). The objective of this investigation was to evaluate the effect of industrial nixtamalization on maize starch. Thus, dent maize grains were sampled from storage silos and the starch isolated (S). From the same batch of maize, DMF was obtained and the starch isolated (S‐DMF). The amylose content in the starches was quite similar (21.5–23.4%) and characteristic of a dent maize. However, nixtamalization increased the calcium content in S‐DMF. The starches investigated exhibited the typical A‐type diffraction pattern after 40 days of storage at 11–84.1% rh. However, the differential scanning calorimetry (DSC) results showed that annealing of maize starch occurred during storage at 30°C. On the other hand, industrial nixtamalization has both a melting and annealing effect on maize starch. Thus, the operative glass transition temperature (Tg), and the DSC parameters that define starch gelatinization (Tp and ΔH) showed that the proportion between crystalline and amorphous regions within the starch granule and the extent of physical damage to starch were modified by nixtamalization. As an example, Tg for S was between 60 and 62.5°C, while the S‐DMF had a Tg of 45–55°C for damaged starch and 65–70°C for annealed starch. Additionally, the extraction of the nonconstitutive starch lipids provided starches with more consistent thermal properties, particularly in the behavior of gelatinization at different water content. This last observation might have important implications in the consistency of starch physicochemical properties and, consequently, in the quality of maize products such as tortillas.  相似文献   

5.
Tortilla stiffening should occur between ‐23 to 57°C, showing a maximum rate near the midpoint of this range (17°C). Starch recrystallization below the glass transition temperature (Tg = ‐23°C) in corn tortillas is minimal due to lack of molecular mobility. The objective of this study was to determine the effect of storage temperature (‐20 to 21°C) on the stiffening rate of corn tortillas with or without additives (carboxy‐methylcellulose [CMC] and maltogenic amylase). Tortilla pliability, stiffness, and energy dissipated obtained by stress relaxation, and amylopectin recrystallization determined by differential scanning calorimetry (DSC) showed a second‐order polynomial relationship with temperature. Tortillas became stiff faster during refrigerated storage (3–10°C). Adding 0.25% CMC and 1,650 AU of amylase maintained tortilla softness and flexibility, both at room temperature and under refrigeration for at least three weeks.  相似文献   

6.
Molecular characteristics based on absolute weight‐average molecular weight (Mw) and z‐average radius of gyration (Rg) of normal corn starch were analyzed by high‐performance size‐exclusion chromatography (HPSEC) attached to multiangle laser‐light scattering (MALLS) and refractive index (RI) detectors under different starch dissolution and analytical conditions. Autoclaving (121°C, 20 min) or microwave heating (35 sec) provided better HPSEC recovery and higher Mw for starch molecules than simple dissolution in hot water. The Mw for the autoclaved corn amylopectin and amylose fractions separated with a TSK G5,000 column at 60°C were 201 × 106 and 3.3 × 106, respectively. The specific volume for gyration (SVg) calculated from Mw and Rg could be used for the comparison of molecular compactness which was inversely related to the degree of branching. The SVg values of amylopectin and amylose fractions in the chromatogram (TSK G5,000, autoclaved for 20 min) were 0.092 and 0.529, respectively. But a portion (20–30%) of large amylopectin molecules did not pass the injection membrane filter (3.0 μm) and the SEC column, resulting in incomplete recovery. The unfiltered portion varied according to the dissolution treatment. Homogenization (7,000 rpm, 5 or 10 min) of the starch solution improved the recovery of the amylopectin fraction, but significantly increased the Mw of the amylose fraction (17 × 106). Sonication for 5 min degraded starch molecules. For accurate analysis of a native starch using an aqueous SEC, the starch should be fully dissolved with proper treatment such as autoclaving or microwaving, and the column should be improved for full recovery of large amylopectin molecules.  相似文献   

7.
Rice pellets were prepared by single‐screw extrusion cooking with an in‐barrel water content of 50 wt%. Three different types of rice, indica glutinous, japonica, and indica, were used as raw materials. Reconstituted rice flour was made to study the effect of amylose content on pellet expansion. The glass transition (Tg) and expansion (Te) temperatures of extruded pellet were determined by differential scanning calorimetry (DSC) and noncontact infrared thermometer, respectively. The amylose content was not significantly affected by extrusion cooking. The reduction in intrinsic viscosity indicated that amylopectin experienced some degradation. The Tg and Te were not functions of amylose content, which affected the expansion ratio of the pellets. The Gordon‐Taylor equation was applied to estimate the Tg of the rice pellets.  相似文献   

8.
Flow field‐flow fractionation (flow FFF) with frit inlet and frit outlet mode (FIFO) was coupled online to multiangle light scattering (MALS) and refractive index (RI) detectors to investigate the molecular characteristics of normal and zero amylose barley starch polymers. Application of two different cross‐flows, 0.35 mL/min followed by 0.1 mL/min, and constant channel and frit flows of 0.1 and 1.0 mL/min, respectively, permitted a complete separation of amylose and amylopectin. The improved signals from the detectors due to application of the FIFO mode enabled the proper characterization of the small molecular weight species, as well as significantly enhanced the reproducibility of the measurements. The weight‐average molecular weight (Mw) and zaverage root‐mean‐square (RMS) radii of gyration (Rg) values for amylose and amylopectin in the normal starch samples were 2.3 × 106 and 280 × 106, and 107 and 260 nm, respectively. The Mw and Rg of amylopectin in the zero amylose starch samples were 360 × 106 and 267 nm, respectively. The slopes (α) obtained by plotting log Mw versus log Rg for amylose and amylopectin were 0.6 and 0.3, respectively. These results are in good agreement with the theoretical prediction of the molecular conformation of amylose and amylopectin.  相似文献   

9.
Resistant starches (RS) were prepared from wheat starch and lintnerized wheat starch by autoclaving and cooling and by cross‐linking. Heat‐moisture treatment also was used on one sample to increase RS. The experimental resistant starches made from wheat starch contained 10–73% RS measured as Prosky dietary fiber, whereas two commercial resistant starches, Novelose 240 and 330, produced from high‐amylose maize starch, contained 58 and 40%, respectively. At 25°C in excess water, the experimental RS starches, except for the cross‐linked wheat starch, gained 3–6 times more water than the commercial RS starches, and at 95°C gained 2–4 times more. Cross‐linked RS4 wheat starch and Novelose 240 showed 95°C swelling powers and solubilities of 2 g/g and 1%, and 3 g/g and 2%, respectively. All starches showed similar water vapor sorption and desorption isotherms at 25°C and water activities (aw) < 0.8. At aw 0.84–0.97, the resistant starches made from wheat starch, except the cross‐linked wheat starch, showed ≈10% higher water sorption than the commercial resistant starches.  相似文献   

10.
Although pulsed NMR (PNMR) has been used for qualitative study of starch retrogradation in selected systems, validation is necessary for its application to new systems. PNMR was used to analyze the retrogradation of rice starches in purified form, in rice flour, and in cooked rice grains. The standard curves between the relative solid content (S′, %) by PNMR and the percentage of gelatinized starch (GS, %) were determined for common rice flour, common rice starch, and waxy rice starch at different moisture contents. The coefficients of linear regression for these curves (R2) were all >0.997. Starches with different amylose contents were tested for S′ values at the stages of freshly gelatinized, retrograded (4°C, 18 days), and reheated (90°C, 20 min). The S′ of reheated starch (S′reheat) was similar to the S′ of freshly gelatinized starch (S′0), so we concluded that the increase in S′ during storage corresponded to amylopectin retrogradation. The effect of moisture content on retrogradation of rice starch, rice flour, and cooked rice grains was studied by PNMR, and the data were interpreted using the Avami equation. Decreasing the moisture content increased the rate of retrogradation and led to a higher parameter k and a lower parameter n. For moisture content in the range studied, PNMR can be used to follow amylopectin retrogradation of different rice starch systems.  相似文献   

11.
The effects of autoclave and oven treatments on the gelatinization of rice flour and on the rheological characteristics of its pastes were studied by differential scanning calorimetry (DSC), rapid viscoanalysis (RVA), and rotational viscometry. Flours from autoclave‐treated rice (ATR) and oven‐treated rice (OTR) were prepared, respectively, by heating at 120°C for 60 min and 160°C for 60 min followed by drying (ATR sample), and grinding at 2.2–12.9% moisture content. The rice flour dispersions were adjusted between pH 6.3 and 2.8 using 0.2M citrate buffer. The retort processing of rice flour in water pastes were done at 120°C for 20 min either once or twice. The gelatinization peak temperature (PT and To) and the peak temperature corresponding to the amylose‐lipid complexes (Tp3) of ATR increased at pH 6.3 and 2.8 compared with OTR and UTR flour. This indicates that the internal structures of the starch granules in ATR became more stable to heat and acid, even though the damaged starch content of ATR was 23% compared with 16 and 7%, respectively, for untreated rice flour (UTR) and OTR. The OTR flour pastes showed a gel‐like behavior at pH 4.5 after retort processing in water at 120°C for 20 min; however, the ATR mixture behaved more like a liquid paste. Decreases in the reducing sugar content of OTR and ATR pastes suggested that enzymes in the heat‐treated rice were denatured, which retarded the hydrolysis of glucose chains and the rupture of starch granules during pasting.  相似文献   

12.
Differences in molecular structure and hydrophilicity may affect the compatibility of food components in a highly concentrated solution. Mixtures of TNuS19 rice starch (RS) and pectins with three different degrees of esterification (22, 64, and 92%) were used as a model system to evaluate the components' compatibility in a low‐moisture system. When analyzed individually by differential scanning calorimetry (DSC), RS, low methoxyl pectin (LMP), intermediate methoxyl pectin (IMP), and high methoxyl pectin (HMP) showed the presence of a glass transition temperature (Tg) at 75.2, 96.2, 96.4, and 93.5°C, respectively. Among mixtures, the compatible RS‐HMP exhibited only a single Tg between the Tg values of the two components, whereas the incompatible RS‐LMP showed two Tg values that were close to those of the individual components. The sub‐Tg endotherms of all three mixtures (1:1) were lower than the means of the corresponding components. The degree of decrease was more pronounced in the RS‐HMP mixture than in the others. The above results imply that the interaction, which led to close contact between side chains of the two components, was more intense in the compatible RS‐HMP mixture than in the RS‐IMP and RS‐LMP mixtures. The decrease of the sub‐Tg endotherm can be used as an index to evaluate the degree of compatibility as well as the interaction occurring between the two molecules. The above findings were further verified by dynamic mechanical analyses. Both viscosity and water retention of the compatible RS‐HMP mixed gel were significantly higher than those of the RS‐IMP and RS‐LMP mixed gels. This evidence further suggests that RS and HMP are compatible and exhibit a strong intermolecular interaction that increases gel viscosity and decreases water loss during high‐temperature heating.  相似文献   

13.
Diacetyltartaric acid esters of monoglycerides (DATEM) and sodium stearoyl lactylate (SSL) displayed thermal events corresponding to glass transition temperature (Tg) and melting of crystalline domains, while monoglycerides (MG) exhibited an endothermic peak corresponding to melting of crystalline structures when heated in a differential scanning calorimeter. The plasticizing effect of water on Tg of gluten exhibited little apparent change in the presence of DATEM, MG, or SSL (glutensurfactant 10:1), in the moisture range of 6.5–21.3% as shown by mechanical spectrometry and differential scanning calorimetry. Glutensurfactant mixtures showed higher G′ and apart from gluten‐SSL, which displayed higher tan δ (G″/G′) at ≤2.51 rad/sec, lower tan δ values than gluten in the frequency range of 0.1–100 rad/sec. DATEM and SSL softened the gluten network before cross‐linking reactions, while MG shifted the onset of cross‐linking reactions to higher temperatures at moisture contents of 30–40%. Complete vitrification of the gluten network occurred at higher temperatures, at the indicated moisture contents, in the presence of surfactants. Softening of the matrix and the delay in cross‐linking of gluten, in the presence of surfactants, might allow for greater expansion of doughs during baking with concomitant increase in loaf volumes.  相似文献   

14.
Thermomechanical analysis (TMA) and differential scanning calorimetry (DSC) were used to investigate the thermal transitions of long‐grain rice kernels. Three distinct thermomechanical transitions were identified as rice kernels were heated from 0 to 200°C. The identified transitions were a low temperature transition with onset at ≈45°C, an intermediate temperature transition at ≈80°C, and a high temperature transition at ≈180°C. Low temperature transition with onset from ≈60°C at 5% moisture content (MC) to 30°C at 20% MC was identified as the glass transition of the rice kernels. Intermediate temperature transition from 60 to 100°C, depending on MC, may be caused by rapid evaporation of moisture in the rice kernels. High temperature transition was associated with melting of the crystalline structure of rice starch. The temperatures of all three transitions decreased as MC increased, confirming that moisture acted as a plasticizer in rice kernels.  相似文献   

15.
Standard white breads were stored with or without crust at 25°C in hermetic pouches. During two weeks of storage, the crumb moisture content and water activity (aw) decreased significantly when stored with crust. When stored without crust, moisture content and aw remained relatively unchanged. The causes of the initial firming of both breads over zero to seven days were not conclusive. But when stored beyond seven days, bread stored with crust was significantly firmer in texture and higher in amylopectin recrystallization than bread stored without crust. Moisture redistribution from crumb to crust played a significant role. This was accompanied by a decrease in freezable water in the bread crumb stored with crust. This loss in freezable water coincided with changes in the thermomechanical profile only in the case of sample stored with crust intact (and with a significant total and freezable water loss). Bread crumb stored without crust did not change in total and freezable water and showed less change in thermomechanical transitions. The transition occurring at ≈60°C (T2) correlated with amylopectin recrystallization but it could also have been caused by moisture loss during the analysis. Moisture migration from crumb to crust greatly reduced the total and freezable water in the crumb region, resulting in a significant reduction in the magnitude of the mechanical transition at ≈0°C (T1) as well as an increase in the storage modulus.  相似文献   

16.
Effects of debranching time, storage time, and storage temperature on production and structural properties of slowly digestible starch (SDS) were investigated. Waxy sorghum starch was hydrolyzed by isoamylase for various times (0–24 hr), and the variously debranched products were stored at ‐30, 1, and 30°C for 1–6 days. Optimal conditions for SDS production were isoamylase treatment for 8 hr and storage at 1°C for three days, resulting in SDS content of 27.0% in the optimum product. Microscopic observation revealed that rapidly digestible starch (RDS) and SDS were removed from the edges and surfaces of the optimum product by α‐amylase digestion. Digestion conditions that removed RDS and SDS resulted in a residue with a higher transition temperature and enthalpy than raw starch on a differential scanning calorimetric thermogram. Removal of RDS alone did not cause distinct decrements of peak temperature (Tp) and enthalpy (ΔH) compared with stored starch. The optimum SDS product showed an amorphous type of X‐ray diffractogram. Digestive removal of RDS from the optimum product gave a residue with X‐ray peaks similar to B type, which supports that it is partly crystalline. Removal of RDS and SDS gave broader peaks in the X‐ray pattern.  相似文献   

17.
The effect of the specific mechanical energy (SME) during extrusion of a protein‐starch mixture was studied by analyzing the glass transition temperature (Tg) and starch gelatinization. We found that the SME values of 344 to 2108 kJ/kg did not significantly change the Tg of the product. To explain the insensitivity of Tg to SME in spite of reported fragmentation taking place during extrusion, we studied the effect of the molecular weight (MW) on Tg in a model system consisting of dextrans of varying molecular weights. We found that the effect of the molecular weight on the Tg reached a plateau at 6.7 × 104. Because the reported size of the fragments created during the extrusion process is larger than this, we were able to explain the apparent insensitivity of Tg to SME in the protein‐carbohydrate matrix studied. However, we found that starch gelatinization varied with SME, the degree of gelatinization being higher for systems exposed to higher SME.  相似文献   

18.
Differential scanning calorimetry (DSC) was used to determine the onset and end temperatures of the glass transition (Tg) for white bread equilibrated between 53 and 84% rh. Calorimetric Tg end values were ≈20°C higher than onset values, indicating that it is probably more correct to refer to a “glass transition range” rather than a glass transition temperature. Slices of white bread inoculated with a mixture of xerophilic molds were equilibrated to 75% rh (equilibrium moisture content of 14.5 g of water/100 g of dry material) and stored at 26°C. In a parallel experiment, some of the equilibrated bread samples were stored without mold inoculation and subjected to spontaneous contamination from the immediate surroundings. As suggested by measured Tg, bread stored at 75% rh and 26°C appeared to be glassy. After storage, samples of bread (inoculated or not) were spoiled by xerophilic molds, suggesting that Tg, as measured by DSC, cannot be considered as an absolute threshold for mold growth inhibition.  相似文献   

19.
The differences in pasting properties involving gelatinization and retrogradation of rice starches from IR24 and Sinandomeng cultivars during heating‐cooling processes were investigated using a Rapid Visco Analyser (RVA)and a dynamic rheometer. The results were discussed in relation to the molecular structure, actual amylose content (AC), and concentration of the starches. Generally, both starches possessed a comparable AC (≈11 wt%), amylose average chain length (CL), iodine absorption properties, and dynamic rheological parameters on heating to 95°C at 10 wt% and on cooling to 10°C at higher concentrations. In contrast to Sinandomeng, IR24 amylose had a greater proportion of high molecular weight species and number‐average degree of polymerization (DPn). IR24 amylopectin possessed a lower DPn and greater CL, exterior CL (ECL), and interior CL (ICL). Comparing the results of RVA analysis and dynamic rheology, the gelatinization properties and higher retrogradation tendencies of IR24 starch can be related to the structural properties and depend on starch concentration. In addition, the exponent n of starch concentration for storage moduli at 25°C (G′25 ∝ Cn) increased linearly with increasing AC.  相似文献   

20.
This research studied developing quick cooking brown rice by investigating the effect of ultrasonic treatment at different temperatures on cooking time and quality. The medium grain brown rice was ultrasonically treated in water at temperatures of 25, 40, and 55°C for 30 min and then dried by air at 25°C to its initial moisture content (11.0 ± 0.6%, wb) before cooking. The microstructure of rice kernel surface, chemical composition, and optimal cooking time of treated brown rice were determined. The pasting and thermal properties and chemical structure of flour and starch from treated brown rice were also examined. The results showed that the optimal cooking times were 37, 35, and 33 min after treatment at 25, 40, and 55°C, respectively, compared to the control of 39.6 min. The ultrasonic treatment resulted in a loss in natural morphology of rice bran, allowing water to be absorbed by a rice kernel easily, particularly at high‐temperature treatment. Even through rice flour still maintained an A‐pattern in the pasting properties, the crystallinity significantly increased after treatment at 55°C. Ultrasonic treatment increased the peak, hold, and final viscosities and decreased the onset temperature (To) and peak temperature (Tp), significantly. Thus, ultrasonic treatment could be used for reducing cooking time of brown rice.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号