首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
An experiment was conducted to observe the phosphate sorption potential of some soils of Bangladesh. Three soil series of calcareous origin, namely Sara (Aquic Eutrochrept), Gopalpur (Aquic Eutrochrept) and Ishurdi (Aeric Haplaquept), and two soil series of non-calcareous origin, namely Tejgaon (Rhodic Paleustult) and Ghatail (Aeric Haplaquept), were selected. The soils were equilibrated with dilute solution of calcium chloride containing graded concentrations of phosphate (0, 1, 2, 5, 10, 25 and 50?μg?P?mL?1), and the amount of phosphate sorbed or desorbed was determined. Although all the soils showed potential for sorbing phosphate from applied phosphorus, their ability to sorb phosphorus differed. Increasing rates of phosphate application increased the amount of P sorption but reduced phosphate sorption percentage in all soils except Tejgaon. Phosphate was sorbed by the soils in the order: Tejgaon > Ghatail > Ishurdi > Gopalpur > Sara at 50?μg?P?mL?1 application. Soils possessing higher amounts of free iron oxide and clay sorbed more phosphate from applied phosphorus.  相似文献   

2.
Abstract

Copper (Cu) is bound strongly to organic matter, oxides of iron (Fe) and manganese (Mn), and clay minerals in soils. To investigate the relative contribution of different soil components in the sorption of Cu, sorption was measured after the removal of various other soil components; organic matter and aluminum (Al) and Fe oxides are important in Cu adsorption. Both adsorption and desorption of Cu at various pH values were also measured by using diverse pasture soils. The differences in the sorption of Cu between the soils are attributed to the differences in the chemical characteristics of the soils. Copper sorption, as measured by the Freundlich equation sorption constants [potassium (K) and nitrogen (N)], was strongly correlated with soil properties, such as silt content, organic carbon, and soil pH. The relative importance of organic matter and oxides on Cu adsorption decreased and increased, respectively, with increasing solution Cu concentrations. In all soils, Cu sorption increased with increasing pH, but the solution Cu concentration decreased with increasing soil pH. The cumulative amounts of native and added soil Cu desorbed from two contrasting soils (Manawatu and Ngamoka) during desorption periods showed that the differences in the desorbability of Cu were a result of differences in the physico‐chemical properties of the soil matrix. This finding suggests that soil organic matter complexes of Cu added through fertilizer, resulted in decreased desorption. The proportions of added Cu desorbed during 10 desorption periods were low, ranging from 2.5% in the 24‐h to 6% in the 2‐h desorption periods. The desorption of Cu decreased with increasing soil pH. The irreversible retention of Cu might be the result of complex formation with Cu at high pH.  相似文献   

3.
土壤组分对广东省酸性水稻土磷吸附参数的影响   总被引：9，自引：2，他引：7  
Soil components affecting phosphate sorption parameters were studied using acid paddy soils derived from basalt, granite, sand-shale and the Pearl River Delta sediments, respectively, in Guangdong Province.For each soil, seven 2.50 g subsamples were equilibrated with 50 mL 0.02 mol L-1 (pH=7.0) of KCl containing 0, 5, 10, 15, 25, 50 and 100 ng P kg-1, respectively, in order to derive P sorption parameters (P sorption maximum, P sorption intensity factor and maximum buffer capacity) by Langmuir isotherm equation. It was shown that the main soil components influencing phosphate sorption maximum (Xm) included soil clay, pH,amorphous iron oxide (Feo) and amorphous aluminum oxide (Alo), with their effects in the order of Alo ＞Feo ＞ pH ＞ clay. Among these components, pH had a negative effect, and the others had a positive effect.Organic matter (OM) was the only soil component influencing P sorption intensity factor (K). The main components influencing maximum phosphate buffer capacity (MBC) consisted of soil clay, OM, pH, Feo and Alo, with their effects in the order of Alo ＞ OM ＞ pH ＞ Feo ＞ clay. Path analysis indicated that among the components with positive effects on maximum phosphate buffer capacity (MBC), the effect was in the order of Alo ＞ Feo ＞ Clay, while among the components with negative effects, OM ＞ pH. OM played an important role in mobilizing phosphate in acid paddy soils mainly through decreasing the sorption intensity of phosphate by soil particles.  相似文献   

4.
Sorption and desorption of cobalt by soils and soil components   总被引：2，自引：0，他引：2  
The sorption of Co by individual soil components was studied at solution Co concentrations that were within the range found in natural soil solutions. Soil-derived oxide materials sorbed by far the greatest amounts of Co although substantial amounts were also sorbed by organic materials (humic and fulvic acids). Clay minerals and non-pedogenic iron and manganese oxides sorbed relatively little Co. It is considered that clay minerals are unlikely to have a significant influence on the sorption of Co by whole soils. Cobalt sorbed by soil oxide material was not readily desorbed back into solution and, in addition, rapidly became non-isotopically exchangeable with solution Co. In contrast, Co was relatively easily desorbed from humic acid and a large proportion of the Co sorbed by humic acid remained isotopically exchangeable. Cobalt sorbed by montmorillonite was more easily desorbed than that sorbed by soil oxide but less easily than that sorbed by humic acid. Cobalt sorption isotherms for whole soils at low site coverage were essentially linear and the gradients of isotherms increased with pH. A comparison of isotherm gradients for whole soils and individual soil components supported the suggestion that Co sorption in whole soils is largely controlled by soil oxide materials.  相似文献   

5.
水溶性有机碳在各种粘土底土中的吸附：土壤性质的影响   总被引：3，自引：0，他引：3  
Clay-rich subsoils are added to sandy soils to improve crop yield and increase organic carbon (C) sequestration; however, little is known about the influence of clay subsoil properties on organic C sorption and desorption. Batch sorption experiments were conducted with nine clay subsoils with a range of properties. The clay subsoils were shaken for 16 h at 4 oC with water-extractable organic C (WEOC, 1 224 g C L-1) from mature wheat residue at a soil to extract ratio of 1:10. After removal of the supernatant, the residual pellet was shaken with deionised water to determine organic C desorption. The WEOC sorption was positively correlated with smectite and illite contents, cation exchange capacity (CEC) and total organic C, but negatively correlated with kaolinite content. Desorption of WEOC expressed as a percentage of WEOC sorbed was negatively correlated with smectite and illite contents, CEC, total and exchangeable calcium (Ca) concentrations and clay content, but positively correlated with kaolinite content. The relative importance of these properties varied among soil types. The soils with a high WEOC sorption capacity had medium CEC and their dominant clay minerals were smectite and illite. In contrast, kaolinite was the dominant clay mineral in the soils with a low WEOC sorption capacity and low-to-medium CEC. However, most soils had properties which could increase WEOC sorption as well as those that could decrease WEOC sorption. The relative importance of properties increasing or decreasing WEOC sorption varied with soils. The soils with high desorption had a low total Ca concentration, low-to-medium CEC and low clay content, whereas the soils with low desorption were characterised by medium-to-high CEC and smectite and illite were the dominant clay minerals. We conclude that WEOC sorption and desorption depend not on a single property but rather a combination of several properties of the subsoils in this study.  相似文献   

6.
Abstract

Knowledge of the change in soil extractable phosphorus (P) as a consequence of soil P fertilization could be useful in discriminating soils with a potential for soil P release to runoff or movement of P along the soil profile. In this research, soils with low to medium P retention capacity were equilibrated for 90 days with soluble P (KH2PO4) at rate of 100 mg P kg‐1 soil. After this period, soil samples both with and without the P addition were analyzed using six conventional methods: 1) Olsen, 2) Bray 1,3) Mehlich3,4) Egner, 5) Houba, dilute CaCl2 solution, and 6) distilled water, and three “innovative”; P‐sink methodologies: 1) Fe oxide‐coated paper strip, 2) anion exchange resin membrane, and 3) cation‐anion exchange resin membrane. The soils without P addition had low levels of extracted P as determined by all nine procedures. Net increases in the amount of P extracted from the soils with added P ranged from 4.2 mg kg‐1 (CaCl2 extraction) to 57.6 mg kg‐1 (cation‐anion resin membrane extraction). Relationships between change in extracted P and i) physical and chemical characteristics, and ii) soil P sorption properties are also presented and discussed.  相似文献   

7.
Zinc sorption–desorption by sand, silt and clay fractions of six representative calcareous soils of Iran were measured. Sand, silt and clay particles were fractionated after dispersion of soils with an ultrasonic probe. Zinc sorption analysis was performed by adding eight rates of Zn from 6 to 120 μmol g?1. For the desorption experiment, samples retained after the measurement of Zn sorption were resuspended sequentially in 0.01 M NaNO3 solution and shaken for 24 h. Results indicated that Zn sorption by soil fractions increased in the order clay > silt > sand, and correlated negatively with CaCO3 content and positively with cation exchange capacity (CEC) and smectite content. Results indicated that for all fractions, the Langmuir equation described the sorption rates fairly well. In contrast to sorption, Zn desorption from soil fractions increased in the order sand > silt > clay, and correlated positively with CaCO3 content, CEC and smectite content. Results showed that parabolic diffusion and two constant equations adequately described the reaction rates of Zn desorption. In general, for all soils studied, the coarser the particle size, the less Zn sorption and more Zn desorption, and this reflects much higher risk of Zn leaching into groundwater or plant uptake in contaminated soils.  相似文献   

8.
Abstract

The apparent recovery of applied zinc (Zn) by plants is very low in calcareous soils of Iran because most of it is retained by the soil solids. Subsamples of 24 surface soil (clay 130–530 g kg‐1; pH 7.7–8.4; electrical conductivity 0.63–3.10 dS m‐1; organic matter 6.0–22.0 g kg‐1; cation exchange capacity 8–20 cmol kg‐1; calcium carbonate (CaCO3) equivalent 180–460 g kg‐1) representing 13 soil series in three taxonomic orders were equilibrated with zinc sulphate (ZnSO4) solutions and the amount of Zn disappeared from solution after a 24‐h shaking period was taken as that adsorbed (retained) by the soil solids. The adsorption data were fitted to Freundlich (X=ACB) and Langmuir [X=(K‐bC)/(1+K#lbC)] adsorption isotherms. Backward stepwiseprocedure was used to obtain regression equations with isotherms coefficients as dependent and soil properties as independent variables. Freundlich A and Langmuir K were found to be highly significantly related to pH and clay and increasing as these soil properties increased. But Langmuir b was related only to clay and Freundlich B showed no significant relationship with any of the properties studied. The distribution coefficient (also called maximum buffering capacity), calculated as the product of Langmuir K and b, was also found to be highly significantly related to pH and clay. It is concluded that pH and clay content of calcareous soils are the most influential soil properties in retention of Zn.  相似文献   

9.
Soil carbon (C) saturation implies an upper limit to a soil's capacity to store C depending on the contents of silt + clay and poorly crystalline Fe and Al oxides. We hypothesized that the poorly crystalline Fe and Al oxides in silt + clay fraction increased the C saturation and thus reduced the capacity of the soil to sorb additional C input. To test the hypothesis, we studied the sorption of dissolved organic carbon (DOC) on silt + clay fractions (<53 µm) of highly weathered oxic soils, collected from three different land uses (i.e., improved pasture, cropping and forest). Soils with high carbon saturation desorbed 38% more C than soils with low C saturation upon addition of DOC, whereas adsorption of DOC was only observed at higher concentration (>15 g kg?1). While high Al oxide concentration significantly increased both the saturation and desorption of DOC, the high Fe oxide concentration significantly increased the desorption of DOC, supporting the proposition that both oxides have influence on the DOC sorption in soil. Our findings provide a new insight into the chemical control of stabilization and destabilization of DOC in soil.  相似文献   

10.
Phosphate sorption and desorption in soils are markedly influenced by iron oxides, although little is known on how the common iron oxides differ in their behaviour towards added phosphate. In this study, we investigated phosphate sorption and desorption in the clay fractions of 12 Terre Rosse that ranged widely in Fe oxide content, had very low contents of oxalate-extractable Fe oxides and different hematite/goethite ratios. Phosphate sorption at an equilibrium concentration of 1 mg P 1?1 was correlated with the goethite but not with the hematite content of the clay fractions. When phosphate was desorbed by electro-ultrafiltration, the difference in desorption half-time between untreated and deferrified clays was positively correlated with the goethite but not with the hematite content. These results suggest that goethite is more active than hematite in phosphate sorption and retention by soils.  相似文献   

11.
  相似文献   

12.

Purpose

This study investigated desorption of potassium (K) and phosphorus (P) from soil and river suspended sediments sampled during a storm event in a Brazilian watershed traditionally used for tobacco plantations.

Material and methods

Suspended sediment samples were collected automatically at the outlet of the watershed and were grouped into three phases: beginning (phase a), middle (phase b) and final stages (phase c) of the storm event. Granulometric and mineralogical characterisation of soils (0 to 0.20 m depth) and suspended sediments was determined, and K and P extractions were performed using a cation and anion exchange resin (CAER) membrane. A kinetic modelling approach was used to estimate the amount of K and P desorbed.

Results and discussion

Clay-sized (<2 μm) content of the soils were all <21 %. Kaolinite, smectite (partially with hydroxy-Al interlayer) and a small amount of illite were found in the clay fraction of the different soils. The clay-sized fractions in sediments of phases a, b and c of the storm event were 49, 52 and 72 %, respectively. Smectite (>90 %) and kaolinite (<10 %) were the dominant clay minerals in the suspended sediments. The values of labile P and potentially available P of suspended sediments were higher than those for soils. In sediments, the highest values of labile P (325 mg kg?1) and labile K (4,458 mg kg?1) were found in phase c and in phase a, respectively.

Conclusions

Particle size distribution and clay mineralogy of soils differed from those of suspended sediments collected during the storm event. By comparison with the watershed soils, suspended sediments collected during the storm event were enriched in fine particles composed mainly of smectite, and this may explain their P and K desorption behaviour. This suggests particle size and clay species selectivity processes during the transfer of sediment particles from soils to aquatic systems. The amounts of P and K desorbed from the suspended sediments in the three phases of the storm event were much larger than those desorbed from soils. This indicates that rainfall promoted the transfer of these nutrients to the watercourses.  相似文献   

13.
The potential for surface and groundwater contamination of soil applied herbicides is partly dependent on soil properties. Sorption and desorption of diuron and norflurazon were studied in seven soils representative of the southern citrus-belt of Florida using the batch-equilibrium technique. Sorption of herbicides was influenced by soil properties. Sorption coefficients (K d) ranged from 0.84 to 3.26 mL g?1 for diuron and 0.63 to 2.20 mL g?1 for norflurazon indicating weak to moderate binding of herbicides to soil. For norflurazon, K dwas significantly related to organic C content, soil pH, and cation exchange capacity. For diuron, absence of a significant relationship between K dand selected soil properties suggests that the soil properties other than those studied may play a role in determining sorption on these soils. Desorption studies showed that higher amounts of diuron and norflurazon was desorbed by water than by 0.5 M CaCl2. An inverse relationship was apparent between herbicides sorbed and that which was desorbed among the soils studied. The soil which exhibited higher sorption had lower desorption and the soil which exhibited lower sorption had higher desorption.  相似文献   

14.
Abstract

Phosphate sorption isotherms were determined for 16 representative major soils developed from different parent materials on Okinawa. Phosphate sorption characteristics were satisfactorily described by the Langmuir equation, which was used to determine phosphorus (P) sorption maxima of the soils. Phosphate sorption maxima ranged from 630 to 2208 mg P kg‐1 soil (mean 1,362 mg P kg‐1). The standard P requirement (i.e., the amount of P required to attain 0.2 mg P L‐1 equilibrium solution) followed the same trend as sorption maximum (r =0.94***), with values ranging from 132 to 1,020 mg P kg‐1 soil (mean 615 mg P kg‐1). This mean value corresponds to fertilizer addition of 923 kg P ha‐1 indicating that the soils have high P fertilizer requirements. Results of simple linear regression analysis indicated that sorption maximum was significantly correlated with clay content, organic matter, oxalate iron (Fe), pyrophosphate Fe, DCB aluminum (Al), oxalate Al, and pyrophosphate Al, but not with DCB Fe, pH, or available P content. The best regression model for predicting sorption maximum was the combination of clay, organic matter, pyrophosphate Fe, and DCB Al which altogether explained 79% of the variance in sorption maximum. The equation obtained could offer a rapid estimation of P sorption in Okinawan soils.  相似文献   

15.
The transformation of isoxaflutole (ISOX) to its herbicidally active diketonitrile degradate (DKN) was significantly enhanced in the presence of soil and occurred more rapidly in systems containing soil with a greater soil pH. Sorption-desorption of ISOX and DKN in five soils collected within a field revealed both ISOX and DKN were more readily sorbed to soils with greater organic matter, clay content, and lower soil pH. Sorption of ISOX residues occurred within 2 h, and extracts contained similar concentrations of ISOX and DKN at 24 h, suggesting the 24-h sorption coefficients for ISOX-treated systems were actually for mixed ISOX residues. Freundlich sorption coefficients were 3 and 4 times greater for ISOX than for DKN. On the basis of the Freundlich organic carbon sorption constants, ISOX and DKN can be categorized in the very high and high mobility classes, suggesting their potential to leach in the soils needs to be evaluated.  相似文献   

16.
Abstract

A laboratory study was conducted to evaluate P sorption in the Ap horizon of four soil series in the Ultisol order (Benndale Is, Hartsells fsl, Lucedale fsl, and Dewey sicl) receiving the same fertility treatments since 1929. Soil was collected in the spring of 1985 from 4 treatments: i) no‐lime, plus P (total fertilizer P = 1584 kg/ha from 1929 to 1985); ii) no‐K, plus P (total fertilizer P = 1584 kg/ha); iii) low‐P (total fertilizer P = 442 kg/ha); 4) standard treatment (total fertilizer P = 2376 kg/ha). The soils and treatments within a soil varied in pH, total P, Mehlich 1 extractable P, K, Ca and Mg, and KC1 extractable Al. The four soils had large differences in P sorption capacity which increased with increasing clay content. The Dewey (27 % clay) soil had the highest P sorption capacity and the Benndale (4 % clay) soil had the smallest P sorption capacity. Sorption of P within a soil was affected by the rate of added P and past fertility treatment. Treatment differences in P sorption were due primarily to the level of extractable P and soil pH. Within a given soil, P sorption (at a given rate of added P) generally decreased as the level of extractable P increased. Regression analysis of P sorption data for equilibrium P concentrations of 1 to 32 μmol/L showed that the parti‐ tioning between sorbed and solution P (buffer power) had not been changed by 56 years of annual applications of P. The maximum P sorption capacity of the four soils was decreased slightly by P fertilization.  相似文献   

17.
The Soreq recharge basins, used for wastewater reclamation employing the Soil-Aquifer Treatment (SAT) system, have been recharged, on average, by about 1,800 m depth of secondary effluent during their operation period of ～25 years. An estimated amount of ～6 kg P m?2 was added to the soil/sediment column during this period. The objective of this study was to compare phosphorous sorption characteristics of representative pristine soils in the Soreq recharge site to those of the basin soils sampled after a long period of effluent recharge. Batch isotherm experiments were conducted: samples of one g of soil were equilibrated with 25 mL of 0.02 M NaCl solution containing 0–3.2 mM of phosphate for 7 days at 25± 1°C and P sorption was measured. Long-term effluent recharge significantly decreased the maximum P sorption capacity of the top sandy soil (0.15–0.3 m) and only very slightly decreased maximum P isotherm capacity of the deep clayey-sand soil (10–10.5 m). The retention of P in the basin sandy soil primarily involved sorption and surface precipitation reactions on soil carbonates. In the basin clayey-sand soil, P was retained by its sorption on surfaces of Fe, Al, Mn oxide/hydroxides and clay minerals. Long-term effluent recharge increased EPC0, (the equilibrium P concentration in solution at which there is no sorption or desorption to or from the soil under the given conditions), of the basin soils compared to the pristine soils. Due to loading of the top horizons with P by prolonged recharge and reduced P concentration in the effluent, EPC0 of the basin sandy soil is now equal to the average P concentration of the recharged effluents. If effluent P concentration will decrease further, the top sandy soil will become a source of P to the reclaimed water, rather than a sink. The clayey-sand layers and lenses in the vadose zone of the SAT system of the Soreq site offer a large capacity for P adsorption. With gradual leaching of carbonate minerals and synthesis of secondary clay minerals, driven by long-term effluent recharge, P retention mechanisms in the basin soil may be changed, but this process would be extremely slow.  相似文献   

18.
Abstract

Sorption of trace quantities of Cd in four soils of different chemical and mineralogical properties, was studied. Initial Cd concentrations were between 15 to 150 μg. 1?1. The sorption isotherms were linear and had a positive intercept in three of the soils, indicating a constant partition‐high affinity sorption isotherm (Giles et. al6). The data also followed the Freundlich sorption isotherm, and the Freundlich K parameter was taken as a measure of the relative affinity of the different soils for the Cd metal sorbed. Cadmium sorbed was extracted by IN‐NH4C1 followed by 0.1N HC1, and the fraction remaining in the soils was considered specifically sorbed Cd. This fraction also followed a linear sorption isotherm, and was around 30% for the four soils studied. The sorption order for the amount of specifically sorbed Cd showed that the Boomer soil (kaolinite‐iron oxides) had the lowest affinity for specific sorption of this metal. This was taken as evidence that kaolinite and iron oxides have a lower capacity for retaining cadmium through specific sorption mechanism(s) than the materials present on the other soils (2:1 layer silicates and humic substances). The existence of specific mecha‐nism(s) responsible by the sorption of trace quantities of Cd in soil solutions has important implications on soil‐plant relationships, Cd mobility in soil profiles and control of Cd activity in soil solutions.  相似文献   

19.
Solution cadmium (Cd) concentrations and sorption and desorption of native and added Cd were studied in a range of New Zealand soils. The concentration of Cd in solution and the concentrations and patterns of native soil Cd desorbed and added Cd sorbed and desorbed varied greatly between the 29 soils studied. Correlation analysis revealed that pH was the most dominant soil variable affecting solution Cd concentration and sorption and desorption of native and added Cd in these soils. However, organic matter, cation exchange capacity (CEC) and total soil Cd were also found to be important. Multiple regression analysis showed that the log concentration of Cd in solution was strongly related to soil pH, organic matter and total Cd, which in combination explained 76% of the variation between soils. When data from the present study were combined into a single multiple regression with soil data from a previously published study, the equation generated could explain 81% of the variation in log Cd solution concentration. This reinforces the importance of pH, organic matter and total Cd in controlling solution Cd concentrations. Simple linear regression analysis could at best explain 53% of the total variation in Cd sorption or desorption for the soils studied. Multiple regression analysis showed that native Cd desorption was related to pH, organic matter and total Cd, which in combination explained 85% of the variation between soils. For sorption of Cd (from 2 μg Cd g–1 soil added), pH and organic matter in combination explained 75% of the variation between soils. However, for added Cd desorption (%), pH and CEC explained 77%. It is clear that the combined effects of a range of soil properties control the concentration of Cd in solution, and of sorption and desorption of Cd in soils. The fraction of potentially desorbable added Cd in soils could also be predicted from a soil’s Kd value. This could have value for assessing both the mobility of Cd in soil and its likely availability to plants.  相似文献   

20.
Cadmium (Cd) sorption and desorption characteristics by Alfisols from different land uses were examined, and the relationships between soil and sorption/desorption characteristics were investigated. Adsorption studies were done using Cd concentrations (0–100 mg Cd kg?1) in 0.01 M CaCl2. The Cd sorbed by the soils was then subjected to two desorption runs. The soils' adsorption conformed to Freundlich and Langmuir equations. The amount of Cd sorbed by the soils varied. Two desorption runs detached more than 95% of sorbed Cd, but the first accounted for more than 80% of the total. Desorption of Cd in degraded soils was more than in soils from other land uses. The amount of Cd desorbed correlated with amount applied (r = 0.90??), solution concentration (r = 0.83??), and amount sorbed (r = 0.70??). A positive relationship exists between the adsorption maxima of the soils and soil organic matter (r = 0.13, p = 0.87). The relationship between amount of Cd desorbed and sorbed is quadratic for all the soil.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号