首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Belt grinding machine with multi axis computer number control(CNC) system can effectively process parts with complex moulding surfaces.In this paper,iso parametric and iso planar tool path planning strategies customized for this kind of machine are proposed.The tool path generation methods are designed based on the analysis of the belt grinding process.By using least square method,optimized cross section normal is computed in the iso planar method.To improve the design efficiency of path planning,reduce experiments and increase economical benefit,the geometric simulation program based on linear grinding model is developed.Experiment on a turbine blade profile shows that the proposed algorithms work satisfyingly.  相似文献   

2.
There exists muchinterference in machining internal spiral groove with big lift angle and small size, whichis a difficult problem. The design and calculation of tool section is analyzed in this paper while differentcutters are utilized to machine the groove when the tool axis is parallel or skew to that of the work piece. The approximating method of using circular-arc cutter is put forward, which is proved by the calculation and analysis to be a feasible method within range of the permissible error. The digital simulation of machining internal spiral groove which is finished by different methods, such as simulation of tool path, error analysis, verification of the cutter design and so on, has been done through typical software such as the Program files function of I-DEAS and the Manufacturing Module of UG.  相似文献   

3.
The eigenvalue sensitivity methods is very useful not only in analysis of electric power system stability but also in design of the controllers. In this paper a new optimal method is proposed to design the parameters of PSS. Using this method the PSS is designed for a single machine-infinite bus system, and the results of digital simulation show that this method is very effective and useful.  相似文献   

4.
Conceptual design is one of the most important stages in building design, and energy efficiency analysis is one of the key issues in building conceptual design stage. The existing energy efficiency analysis methods and tools require inputing large number of parameters. However, the detail information of most parameters is not identified at the stage of conceptual design. And the current prevailing energy consumption simulation methods and tools are not appropriate at the stage of conceptual design. The proposed method can be used to compare the energy efficiency of multi strategies at the conceptual design phase. Minimum data were required to be input for achieving the optimal building design scheme. The method can provide a solution to the gap between the rapid building design cycle and the sustainable development demand in China.  相似文献   

5.
The refined plastic-hinge method is one of the simplified advanced analysis methods. The second order effects of the whole structure and its members, geometric imperfections and residual stress as well as the feature of semi-rigid connections can be taken into account in this method. The refined plastic-hinge method can be used in advanced analysis and design of planar steel frames, while its use in the advanced analysis of space frames needs to be developed. The technique associated with the dealing of different inelastic factors in advanced analysis of both the planar and space steel frames with practical refined plastic-hinge method and the available way to extend planar frame analysis to space frame analysis are reviewed in detail. The problems of the refined plastic-hinge method for advanced analysis are discussed in this paper.  相似文献   

6.
The mountain hazards like snow avalanches, landslides, rock falls, debris flows and so on all have strong power of destruction which seriously threaten human’s lives and belongings. Therefore, it is necessary to study more the development of these disasters in order to prevent them. Setting up obstacles is the primary measure to control the movement and deposition process of mountain hazards. For the study of the influence of this measure on the development of disasters, the numerical simulation calculation aiming at the flow and deposition process of the granulars flowing past different built obstacles was made by the theory of SH granular flow and the method of finite volume discretization based on Roe's Scheme. Futhermore, the influence of different settings of obstacles on the granular flow is discussed. The numerical results show that the settings of obstacles have a great effect on the process of granular flow. That is, the effective precaution against the disasters is no other than setting up the obstacles correctly. As the numerical simulation calculation can optimize the setting of obstacle, it provides a reasonable and economic reference scheme of disaster prevention and planning of mountain area.  相似文献   

7.
A cross-plane electrical impedance tomography system is constructed to solve the problem of the conventional planar electrode array. This system consists of four planar and eight axial cross imaging planes composing from 65 electrodes. The Tikhonov regularization algorithm is adopted for image reconstruction in simulation and flume experiment. Comparison between the reconstruction result and the original object shows that the cross-plane reconstruction method in three-dimensional space provides higher spatial resolution and position accuracy. In addition, it effectively reduces the amount of computation, and reveals great prospect for the application of clinical examination and monitoring.  相似文献   

8.
A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.  相似文献   

9.
The reliability level of tool magazine is an important indicator to show how advanced a horizontal machining center is. To more effectively promote the reliability level of tool magazine,a new method combining importance and structure optimization is introduced. Taking tool magazine of a horizontal machinging as object, the fault tree of a tool magazine is established based on 35 failure data obtained from a horizontal machining center. Important levels of elementary events are calculated by fault tree analysis,and the order of importance is determined based on importance values. An improved design of structural reliability for elementary events with great importance is made according to failure principles and tool changing process. The feasibility of the improved design is verified by the designer of the tool magazine.  相似文献   

10.
A numerical simulation commercial software has been developed by the object-oriented Visual Basic programming language on the basis of the 2D mathematical model of secondary cooling Process in billet continuous casting. Thereby an effective experimenting tool for computer simulation of continuous casting process is gained. By simulation with the software, the caster structures and operating parameters in continuous casting can be designed and optimized. The simulating calculation examples on several casters and its production applications indicate that the commercial software developed has more accuracy, practicability and commonality, as also as simpler operating capability. The simulated results have been successfully applied to the design and production of the high-efficiency modification for several billet casters interiorly.  相似文献   

11.
The main problem in optimal control of approximate period process is the optimization of periodic initial state. A fictitious control method is advanced in this paper. In combination with the link method of states between two periods, this method not only gives a quite good optimal result, but also reduces the quantity to be computed and stored. The simulation of optimal control in a water plant shows the availability of this method.  相似文献   

12.
A new method,the concurrent optimal design for the mechanical product accuracy is addressed presented, this method is very suitable to a concurrent engineering context. Differing from the convensional tolerance design method, this method establishes a direct link between product working accuracy and machining precision of the parts. Therefore, in the product design phase,the optimal machining tolerances which satisfy the product working accuracy can be determined. Using this method, the design and manufacturing time and cost can be enormously reduced and product quality can be guaranteed.  相似文献   

13.
A mathematical model for accurate relief grinding of gear hob cutters along radial directions is presented based on the analysis of grinding geometry. Both the design and manufacturing models of gear hob cutters are carefully derived and presented. By employing the plane envelope theory, the reference contour of the grinding wheel is determined in order to attain the design tool profile precisely. The tooth profile error model after regrinding is also given to confirm the grinding parameters. The model provides accurate solutions for both the tool profile and the sectional contour of the grinding wheel. It is simple and straightforward and can be used to produce high precision hob cutters systematically. Two numerical examples are presented to illustrate the effectiveness of the proposed method. The model computing results indicate that the proposed method is practical, precise and reliable. The method provides valuable reference for the design and machining of hob cutters.  相似文献   

14.
Progressive Collapse Analysis (PCA) is the base of quantitative assessment of progressive collapse-resisting capacity and progressive collapse-resisting design. There has been heightened interest among researchers of civil engineering in PCA. PCA of planar RC frame is carried on by vertical nonlinear dynamic analysis based on alternate load path method. According to responses of damage structure, progressive collapse-resisting capacity of remaining structure is evaluated. Two cases of removal of elements are analyzed, removal of columns at different stories on the same axes one by one and removal of all columns on the same axes at the same time. According to analysis of the effect of failure duration on structural progressive collapse, it is showed that the response of remaining structure is highly sensitive to failure duration of elements. The results indicate that vertical nonlinear dynamic analysis is an efficient method of progressive collapse-resisting design and progressive collapse-resisting capacity analysis.  相似文献   

15.
An A. C. load flow analysis of the reliability evaluation of composite generation and transmission systems is presented on the basis of a fast outage simulation algorithm and an optimal model of active and reactive power adjustment after outage contingencies. The information of the first -level outage events is utilized for simulating higher -level outage events in the fast outage simulation algorithm ; the optimal model is satisfactory in speed and accuracy with the application of concentric relaxation and linear increment constraint on the comprehensive adjustment of active and reactive power. As an example. the IEEE Reliability Test System is tested and the results show that the method is accurate and well-matched in speed with the method studied by R. Bllinton, et al.  相似文献   

16.
On the basis of analysing the defaults occuring in normal design,a new method of optimum design for individual foundation is put forward in this paper.This method can solve some problems successfully such as the strengh and deformation can be considered at the same time,which cannot be done in the current specification.The optimal mathematical models of individual foundation design and the bottom surface dimension design under eccentric load are derived.The optimal solution is decided by method of optimization and the method selected is penalty function and complex method, and the programs of optimum algorithm have been compiled and design and drawing of individual foundation have been completed. The final result suggests that a fair-sized economic efficiency can be obtained by using optimum method for foundation design.  相似文献   

17.
Due to lack of estimation during initial stage of traditional physical design process for industry product, the efficiency of conduct development is low with high cost. A basic framework of twisted blade virtual design is set up based on the theory and method of product virtual design, and aiming at the thermodynamic process of middle or lower stage of steam turbine. The molding rule of twisted blade is found by thermodynamic computation program. The study of blade virtual design is carried through from 3-dimensional modeling to simulation test. The combination of thermal power theory, computer simulation technology and CAD system forms a kind of design method with the superiority such as high efficiency, low cost and good decidability is represented in the virtual design of turbine blade.  相似文献   

18.
This paper introduces the metod of optimal design of municipal water distribution,The main points are the theory,mathematical model,program frame figure and example in practice of the optimal method of hydraulics.The program is applicable to the design and calculation of the pipe network in a city. It gives a simple and convenient calculation method for multiple-scheme design and scheme cmparison of water supply system.  相似文献   

19.
A optimal design with whole structure parameters and its program are carried out. A reasonable model is established. Using the method a optimal design with whole structure parameters by original parameters of American P&H2300xp excavator was calculated. The size,carried out by the method,approximates to the size of P&H2300xp excavator very well.  相似文献   

20.
本试验对潺菜病叶进行了组织分离,经过纯化鉴定病原菌为寄生疫霉(Phytophthora parasitica Dastur)。试验使用了七种杀菌剂采用了含毒培养基生长速率法来测定对寄生疫霉的抑制效果,试验结果表明：药后48h,百菌清的EC50值为13.60mg/L,毒力指数较大,对寄生疫霉菌抑制效果非常显著;恶霜锰锌和代森锰锌的EC50值为16.99和28.62 mg/L,抑制效果较显著;甲霜锰锌、霜霉威和烯酰吗啉的EC50值分别为为56.23mg/L、56.23mg/L和60.71mg/L,效果一般;二氯异氰的EC50值为319.21mg/L,毒力效果较差;药后24h各药剂对寄生疫霉的抑制效果与药后48h抑制效果相似。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号