共查询到20条相似文献，搜索用时 15 毫秒
1.
Zhang Wei Ren Zhen 《保鲜与加工》1988,(6)
After considering the features of the differential equations which have described the dynamic behaviours of HVDC systems, a fast algori -thm is presented for these equations. Compared with the fourth Runge-Kutta Method,this method has less amount of calculation with the same precision, numerical stability and other properties. Therefore, the use of the method has greatly increased the speed of the digital simulation of HVDC systems.In this paper an example of calculation is given, and the results obtained hv using this example are compared with the results obtained by calculating with the fourth Runge-Kutta Method. The speed of simulation by using this method is about 1.8 timss as fast as that by using the fourth Runge-Kutta Method. 相似文献
2.
With the development of electric power industry, more and more projects of building transformer substation need a great deal of fund. More exact evalution of projects becomes more important.In evalution of projects, calculation of earthwork volume may be a very important part.According to the requirement of most projects and on the basis of traditional method , we have created a new method of optimal calculating earthwork and auto-balance. Minute-dividing technology and interpolating way are used to enhance the simulation of Grids.The new method can better simulate the landform and more effectively promote the precision and speed of calculation of earthwork .Auto-Balance can do what can't be reached by manual work. 相似文献
3.
In binary phase diagram there are many stable compounds. Hereby a new method for calculating activities of compounds from binary phase diagram involved stable compounds is presented. Based on the available formula for calculating activities in binary phase diagram, the activities of the two pure components are gained. And the balance constant K~0 can be obtained from mass action law. Thereby, the activities of stable compounds are obtained from the activities of the two pure components. By using this method, the activities of stable compounds in In-Sb system are obtained. It proves that this method is feasible. 相似文献
4.
5.
This paper conducts in-tube heat transfer experiments in a three dimensional fin tube with 102 mm outer diameter.Compared with the smooth tube,the heat transfer enhancement ratio is between 1.65 and 1.7,and the pressure drop ratio is between 1.65 and 1.7.Based on the analysis of the heat transfer and tube surface temperature,a new type heat exchanger is put forward.Moreover,the design and calculation method is explored.The engineering example indicate that not only the tube surface temperature is higher than the smooth tube,but also the quantity of heat is increased by about 20% than the smooth tube.Compared with other types,the new type heat exchanger has a overall better performance. 相似文献
6.
The defective insulator can be detected by measuring electric field, however, the electric field calculation accuracy of the insulator strings is low. Charge simulation method (CSM), which is optimized by genetic algorithm (GA), is adopted to calculate high voltage electrostatic field. The optimal method principle and feasibility analysis is given. The objective function and optimization model of electric field distribution around insulator strings are constructed and analyzed. The results of calculation and analysis demonstrate that adopting the potential of check points near insulator strings as objective function and using GA to optimize the charge of simulation charge, better performance can be achieved for improving ability of global optimization, calculating precision, searching speed, simulating precision of CSM and accuracy of diagnosing defective insulator in the insulator strings. 相似文献
7.
A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient. 相似文献
8.
9.
Yangla copper mine is going to build a new tailings pond for its tailings disposal. The tailings dam is 185.0 m high and centerline method is used to construct the tailings pond. For the stability of the tailings dam, 2D FLOW program is used for the numerical simulation study about the dam seepage. During simulation calculation, different conditions which include a drainage system installed into the dam or not and different beach widths, i.e. 70 (the flood condition), 100, 300 m (the normal condition), are considered. Through calculation, the change of the seepage under different conditions is obtained, which shows if the drainage system is installed into the tailings dam, the underground water can be successfully drained out. This can keep the phreatic surface level relatively low, so as to improve the stability of the dam. 相似文献
10.
Float-zone method for growth of semi-conductor silicon is considering very promising under microgravity,but the effect of thermocapillary convection induced by surface tension gradient on the crystal quality is quite highlight.In the present work,a nwe method referred to as surface-cut method is suggested to reduce the melt flow.A mathmatical model to describe the thermocapillary convection in a half float-zone with surface-cut is proposed and numerical simulation for the temperature and the flow field under different surface-cut way is conducted using the finite element method.The results show that the effective reduction can be achieved and the flow will be weaked by 70% by proper increase of the surface-cut time. 相似文献
11.
A numerical simulation test of the internal explosive loading on large space structure was carried out by employing algorithm ANSYS/LS DYNA.An appropriate model was established for calculating the dynamic responses of the large space cylindrical reticulated shell under inner blast loading based on the proof of correctness and reliability of the model and parameters selection.Combining the Ritz vibration mode superposition method with the Proper Orthogonal Decomposition (POD) method, the problems of spatiotemporal asynchrony of shock waveforms and pressure distributions on large space structure surface were solved and the calculation for dynamic response of large space structure was reduced and simplified.Furthermore, the numerical simulation of dynamic responses was carried out.And the influence of the ratio of rise to span and the explosive position on the dynamic responses of the structure was studied.It was found that the calculation model was suitable for the dynamic response analysis of the large space cylindrical reticulated shell under internal explosion and the cylindrical reticulated shells with bigger ratios of rise to span were stronger in the capacity of anti explosion.In general, the damages to the large space structure caused by eccentric blast shock waves were more serious than that caused by central explosion.And it was the most disadvantageous to the edge components of the structure.The more attention should be paid to the anti explosion capacity of the support areas and the edge components while designing the shells. 相似文献
12.
RONG Guo-rui 《保鲜与加工》2000,(4):50-55
In this paper, the formulas calculating the stress of frame of truck crane are deduced according to the thin wall structure theory, the calculation program is compiled and used in calculating the stress of the truck frame. The calculated results are checked and complemented by structural analysis program with finite element SAP5, providing the theoretical and calculation basis for design and calculation of the frame. 相似文献
13.
The geothermal heat exchanger is the key component of ground coupled heat pump systems. We discuss the key parameters method of calculating geothermal heat exchanger length based on line source theory. Typical meteorological year data is used to determine the hottest month, the coldest month and annual average surface temperature. The building hourly load can be obtained by introducing the concept of equilibrium temperature. The cooling fraction and the heating fraction then can be calculated using building hourly load and performance parameters curve fit of a water source heat pump unit. The method for selecting the hottest and lowest entering fluid temperature and calculating the borehole and ground thermal resistance is given. A vertical U tube heat exchanger length calculation procedure is proposed. 相似文献
14.
In this paper, based on the theory of the rotation of a cross section around a fixed axis, a new calculation method of second-order stress of space stability for thin wall member is applied. The example given in this paper shows that the conception of this new method of second order analysis is clear and the calculation procedure is concise. 相似文献
15.
NPV have been widely applied. A majority of the existing calculating methods of cash flow are the static method or the expectation method. It is more reasonable to regard future cash flow as random variable which has certain probability distribution, which shifts with time. But the research about it has been introduced rarely. Through introducing some kinds of existing methods and considering the feature of Markov method, a dynamic method which is used in solved the distributing of indeterminate feature cash flow is showed. So a new kind of dynamic calculation method about NPV is obtained. The method is applied in the calculation to future cash flow of the certain highway investment project of China. The result shows that this method is feasible, effective. 相似文献
16.
This paper uses the column length amending method to realize the construction simulation,and verified the feasibility of the column length amending method and the accuracy of the program design by comparing calculation results of examples.Due to the characteristic of the column length amending method,it is convenient to consider many factor affection of concrete during the construction process.At same time,each layer can be analyzed conveniently after construction. 相似文献
17.
The foundation pit deformation of a commercial building in Hangzhou is calculated by using calculation method related to foundation pit deformation. The calculation results by m method show that the maximum deformation is 29.2mm and the real maximum deformation is 174.6mm. The deformation character obtained by foundation coefficient method is different from the real deformation. There are lots of factors influencing foundation deformation. According to practical engineering condition, in this study, the influencing factors for soil parameters, bracing condition, condition for insertion of retaining wall into soil and construction speed are determined. The calculation method used is analyzed and modified. Finally, a useful and valid method for calculating foundation deformation is presented, by which the foundation pit deformation in practical project can be forecasted and analyzed. 相似文献
18.
ZHAO Ji kun 《保鲜与加工》2009,(4):37-43
Taking into account the influence of the internal micro cracks on the strength and deformation of concrete, a four phase composite material model was proposed, in which it included mortar, aggregate, interface and random defects. Meso scale unit in concrete was subjected to elastic plastic damage constitutive of increments form in strain space. With the simulation of mesh concrete crack growth by damage elimination, the damage processes of concrete under 3 D uniaxial compression and the elasto plastic damage process of concrete under uniaxial tension with heterogeneous specimen were obtained. It was shown that the proposed four phase model added the simulation of random defects, with which it was more appropriate to the actual situation in concrete forming. The percentage of random defects in volume was the key to determine the weakening degree of macro strength of concrete. The cracks occlusion was obvious for the lower homogeneous uniaxial tension specimen and the fracture was clearer for higher homogeneous specimen. The simulation results was in good agreement with test results. 相似文献
19.
The heating and air conditioning energy consumption of residential buildings is influenced by the behavior of indoor living personnel.On the basis of research and analysis,two kinds of calculation modes reflecting the behavior of indoor living personnel are estimated.Under two kinds of different calculation modes,by using the building thermal environment simulation Toolkit DeST to simulate the energy consumption calculation for certain residential building in Shanghai,and the simulation results are compared with the research results.The influence of calculation mode on heating and air conditioning energy consumption of residential buildings in Shanghai is analyzed in this paper.In order to obtain the right simulation calculation method correctly reflecting the energy consumption of residential buildings.This method can be used for analysis and evaluation of heating and air conditioning energy consumption of residential buildings in Shanghai,and it can serve as instruction for right energy design of residence building. 相似文献
20.
Based upon the conception of the least loop,the most loop and direction factor presented by the author firstly,the algorithm of searching out the least and most loops has been designed.By building the adjoining matrix, confirming the start-point of searching,vectorizing the searching sides,calculating the direction factor of adjoining sides,we can search out the next side of the least loop or the most loop rapidly.With a valid searching side being confirmed at every searching and the searching scope being reduced by forming degenerate graph,the time compexity of the algorithm is much less. In the research of the automatic calculating system of construction quantities, the problem of houses partition and out-wall partition had been solved succesfully by utilizing this searching algorithm. 相似文献