首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This work aims to predict the mechanical properties of woven jute/banana hybrid composite. Woven fabrics are arranged in three layers of different sequence. Resin used in this work is Epoxy LY556 with hardener HY951. Composite specimen are prepared by hand-layup techniques. The effect of layering sequence on the mechanical properties namely tensile, flexural and impact was analysed. It is found that the tensile and flexural strength of hybrid composite (Banana/Jute/Banana) is higher than that of individual composites. Similarly, the impact strength of Jute/Banana/Jute hybrid composite is better than other types of composite. It is found that the moisture absorption of woven banana fiber composite is lesser than the hybrid composite. Fractography study of the fractured specimen is carried out using scanning electron microscope to analyse the fracture behaviour of the hybrid composite.  相似文献   

2.
Kenaf/empty fruit bunch/polylactic acid (kenaf/EFB/PLA) hybrid biocomposites were prepared using hot press technique. The ratio of fiber to polylactic acid was set at 60:40 with 1:1 ratio between kenaf and empty fruit bunch fibers. Physical, mechanical and thermal properties of hybrid biocomposites were subsequently characterized using Fourier transform infrared spectroscopy, scanning electron microscope, X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry, tensile and water absorption tests. Test results indicated that mechanically stronger fiber was able to support the weaker fiber. Hybrid fiber biocomposite had higher crystallinity as compared to single fiber biocomposite. Water absorption of hybrid composite was higher as compared to single fiber composite. Thermal result revealed that hybridization of fiber was not significantly influence the thermal properties of composites. However, the presence of two different fibers proposed good wettability properties, which could reduce the formation of voids at the fibers-polymer interface and produce composites with high stiffness and strength.  相似文献   

3.
Present technological development and innovation needs a better class of material that meets all the practical applications along with its environmental friendly nature and economical value. Hybrid natural fiber composites, a sector of natural composites meets these requirements. This paper deals with fabrication, mechanical characterization of a hybrid (Jute+Flax+GFRP) composite and also the comparison of it with the (Jute+GFRP) based composite. These composites are fabricated using hand lay-up technique. The arrangement of hybrid composite is such that a layer of vertically laid flax fiber is flanked between layers of horizontally laid jute fiber. Epoxy resin alongside with HY951 hardener is used as the binding agent throughout the layer. Glass fiber laminates are used on both sides for improving the surface finish and surface hardness. The volumetric fraction is such that one third of total volume is occupied by Jute and Flax fibers. Test results shows that the hybrid natural composite has excellent properties under tensile, flexural loading. At last failure morphology analysis is done using Scanning Electron Microscope (SEM) and the internal structure of the broken specimen is discussed.  相似文献   

4.
Hybrid yarn was produced by twisting silk with nylon covered lycra yarn. Silk of 20 D in warp and hybrid yarn in weft was woven to develop lustrous woven stretch fabrics for sari blouse. Silk and hybrid yarn fabrics were produced in three different weaves namely plain, crepe and sateen. An in-depth study was carried out to understand the effect of weave on thermal comfort; low stress mechanical properties, total hand value and stretch properties. Nine blouses (3 samples× 3 figures) were constructed from three different woven stretch materials for fit assessment and objective pressure comfort test. The effect of fabric weave, low stress mechanical properties, total hand value and stretch properties on fit and pressure comfort of silk/hybrid yarn stretch fabrics were analyzed. Sateen weave silk/hybrid yarn stretch fabric shows higher total hand value, stretch properties and better thermal comfort properties. Sateen and crepe weave stretch fabrics provided good fit. Sateen weave fabric exerted lower clothing pressure value in the range of 3-12 mmHg at all body locations in standing position and in different postures.  相似文献   

5.
The aim of the presented research was to study the influence of surface layer material on improvement of impact, dielectric, EMI shielding and sound absorption properties of sandwich composites. The sandwich composite structure consisted of Kevlar or Carbon woven fabric at the surface layer, recycled high loft nonwoven in the center and a mixture of carbon particles/epoxy matrix as a binder to hold the surface layer and core together. The carbon particles were incorporated in epoxy in order to improve failure mechanism and enhance dielectric properties or electromagnetic shielding of sandwich composites. The biggest improvements on impact properties of sandwich composites were obtained when Kevlar fabric was used as surface layer. However, surface layer of carbon fabric was found to provide better dielectric properties and improve EMI shielding of sandwich composites against Kevlar fabric surface layer.  相似文献   

6.
In this paper, perforated composite panel was combined with porous and resonance structures to investigate the influence on acoustic absorption and resilient properties. The perforated composite panel was fabricated based on highdensity flexible-foam via perforating and reinforcing with laminated hybrid nonwoven fabric. Effect of aperture size (AS) (ranging from 3 mm to 6 mm), perforation ratio (PR) (5 %, 10 %, 15 % and 20 %) and perforation depth (PD) (25 %, 50 %, 75 % and 100 %) on the compressive hardness, rebound resilience and acoustic absorption properties was explored. Multiply hybrid nonwoven fabric which was fabricated with low-melting point polyester (LMPET), flame-retardant polyester (FRPET) and recycled Kevlar fibers was utilized to reinforce the flexible composites and improve the acoustic property. Nonwoven that was fabricated with entangled LMPET fibers had porous structures which could reinforce the flexible foam and enhance the acoustic absorption properties. The result revealed that the continuity and supporting of porous flexible foam had directly influence the compressive hardness. The maximum hardness of the flexible-foam based perforated composites reached 420 N. The rebound resilience result showed that the sample had high resilient structure and the resilience was up to 48 %. The perforated flexible composites plate (PFP) with 4 mm-AS performed the highest acoustic absorption coefficient at 0.9. The acoustic absorption coefficient was higher than 0.8 in the frequency range from 800 to 1600 Hz and 1600 to 2400 Hz when perforated composites had 4 mm-AS at 5 % and 10 % perforation ratio. With the increase in perforation ratio, absorption peak moved from 3200 Hz to 4000 Hz. Hybrid nonwoven laminated layer help to broaden the frequency range of acoustic absorption of perforated high-density flexible foam based composites panel. Acoustic absorption coefficient was higher than 0.4 when frequency ranging from 900 Hz to 4000 Hz.  相似文献   

7.
This paper presents results of dynamic deformation behavior of woven natural silk/epoxy sandwich composite panels. The specimens were prepared in configurations of reinforced woven natural silk fiber (RWNSF)/Epoxy/Foam, RWNSF/Epoxy/Coremat; RWNSF/Epoxy/Honeycomb and reinforced RWNSF/Epoxy (control material) using hand-lay-up method. Each of the three core material was sandwiched between reinforced woven natural silk fiber/Epoxy composite facesheet. Drop weight impact test was carried out under 32 J impact energy. Degree of damages inflicted on the contact surface, through thickness and rear surface were analyzed, sandwich composites performed better than the reinforced (control material). Failure mechanism involved interlaminar matrix cracking, layer debonding, delamination and fibre breakage.  相似文献   

8.
In this study, the ballistic impact performance of woven kenaf-Kevlar hybrid and non-hybrid composites against fragment simulating projectiles (FSPs) was investigated. All the composites were prepared using the hand lay-up technique, method, followed by static load compression. The hybrid composites consist of Kevlar fabric and woven kenaf layers. The results obtained indicate that the energy absorption, ballistic limit velocity (V 50) and failure behaviour of the composites during the impact event were affected by the woven kenaf hybridisation. The additional kenaf layers in hybrid composites resulted in the increase in composites thickness and areal density, thus increased the energy absorption (14.46 % to 41.30 %) and V 50 (5.5 % to 8.44 %). It was observed that the hybrid composites failed through a combination of fibre shear, delamination and fibre fracture in the impacted surface, woven kenaf-Kevlar interface and rear surface respectively. Although the specific energy absorption was lower for the hybrid composites, further investigations need to be carried out to utilise the great potential natural fibres.  相似文献   

9.
In this work, hybrid composites were fabricated by hand layup method to hybridize treated Pineapple leaf fibre (PALF) and kenaf fibre (KF) in order to achieve superior mechanical properties on untreated hybrid composites. Silane treated PALF/KF phenolic hybrid composites were prepared on various fibre fraction to investigate mechanical properties and compared with untreated PALF/KF phenolic hybrid composites. The effects of silane treatment on hybrid composites were investigated by fourier transform infrared spectroscopy (FTIR) and found very effective peaks. Effects of treated hybrid composites were morphologically investigated by using scanning electron microscopy images and analysed the tensile results. Treated PALF/KF phenolic hybrid composites enhanced the flexural strength, modulus, impact strength and energy absorption while tensile strength and modulus decreased. The overall performances of 70 % PALF 30 % Kenaf hybrid composites were improved after silane treatment. Silane treatment of fibres improved the mechanical performance of hybrid composites and it can be utilized to produce components for building structure, materials and automobile applications.  相似文献   

10.
In this paper, the bending properties of woven carbon/glass and carbon/aramid fabric-reinforced polymer laminates is studied using a combination of experimental analysis and fracture observation. Six types of each hybrid composite were manufactured by lamination of the carbon/aramid fabric and carbon/glass fabric using VARTM. Bending behaviors were fundamentally evaluated for the six types of monolithic composites laminated by the same fabric. The objective was to achieve a good bending strength by effective combination of composite structures using limited amounts of a raw material. It was shown that the bending property was different, depending on the type of fiber, lamination structure, and the number of layers.  相似文献   

11.
The aim of this study was to understand the effects of softening treatment on pull-out properties of plain, ribs and satin fabrics. Polyester woven fabrics were used to conduct the pull-out tests. Data generated from these tests included pullout force, crimp extension and fabric displacement. A developed yarn pull-out fixture was used to perform single and multiple pull-out tests on treated and untreated polyester fabrics. Yarn pull-out forces depend on fabric treatments, fabric density, fabric weave, and the number of pulled ends in the fabric. The results of regression model showed that multiple and single yarn pull-out forces of treated fabrics were lower than those of untreated fabrics. The multiple yarn pull-out force was higher than that of the single yarn pull-out force, and that dense fabric had a high pull-out force. Treated and untreated plain fabrics had high single and multiple pull-out forces compared to those of treated and untreated ribs and satin fabrics. Yarn crimp extension depends on directional crimp ratios in the fabric and the number of pulled yarn ends. High directional crimp ratio fabric showed high directional yarn crimp extension. Fabric displacement depends on the number of pulled yarn ends and also fabric treatments. Fabric displacement in multiple pull-out tests showed high fabric displacement compared to that of single pull-out tests. On the other hand, the regression model could be used in this study as a viable and reliable tool.  相似文献   

12.
The structural properties of a plain fabric were considered using the lenticular model. The structure of a plain woven fabric can be defined in terms of warp yarn number, weft yarn number, warp fabric density, weft fabric density, warp crimp, and weft crimp. Many structural variables of the plain fabric could be calculated by the lenticular model using these terms. Also, this model can be used to explain the geometry of the flattened yarns that occur during the weaving process. Flattening factors of threads for various types of fibers were calculated, compared, and explained with the number of yarn twist. Flattening factors were found to affect the structural variables of the fabric such as fabric thickness, air permeability, and yarn crimp. Yarn crimp was also studied with variation of the structural variables of the fabric.  相似文献   

13.
The aim of this study was to understand the effects of fabric sample dimensions on pull-out properties of fabric weaves. Polyester woven fabrics were used to conduct the pull-out tests. A yarn pull-out fixture was developed and data generated from this research. Yarn pull-out forces depend on sample dimensions, fabric density, fabric weave, and number of pulled ends in the fabric. Results showed that multiple and single yarn pull-out forces of long samples were higher than those of short samples, and the multiple yarn pull-out force was higher than that of the single yarn pull-out force, and dense fabric has high pull-out force. Plain fabric weave showed high single and multiple pull-out forces compared to ribs and satin fabric weaves. The regression model could be used in this study as a viable and reliable tool. This research could be valuable for development of multifunctional fabrics in technical textile applications.  相似文献   

14.
In this study, electromagnetic shielding characteristics of woven fabrics made of hybrid yarns are investigated. For this purpose, initially the hybrid yarns containing stainless steel wire are produced with hollow spindle covering technique, and then eight different fabric samples are produced using these hybrid yarns. Electromagnetic shielding values of fabric samples are determined by a test set up based on enclosure measurement technique. Measurements are made in the frequency range of 30 MHz-9.93 GHz. Test results show that woven fabric samples investigated in this study have 25–65 dB electromagnetic shielding effectiveness for incident frequency. It was also shown that the direction, density and settlement type of conductive hybrid yarn in fabric structure are important parameters affecting electromagnetic shielding characteristics of woven fabrics.  相似文献   

15.
This study examined the effects of the total porosity, pore size, and cover factor on the moisture and thermal permeability of woven fabrics made from DTY (draw textured yarns) and ATY (air jet textured yarns) composite yarns with hollow PET (polyethylene terephthalate) yarns. The wicking of the hollow composite yarn fabrics was found to be superior to that of the high twisted yarn fabrics, which may be due to the high porosity in the hollow composites yarns, but this was not related to the cover factor. The drying characteristics of the hollow composite yarn fabric with high porosity were inferior compared to the high twisted yarn fabrics due to the large amounts of liquid water in the large pores, which resulted in a longer drying time of the fabric. The thermal conductivity of the hollow composite yarn fabrics decreased with increasing measured pore diameter due to the bulky yarn structure. The effects of the hollowness of the yarn on the thermal conductivity were more dominant than those of the yarn structural parameters. The air permeability increased with increasing measured pore diameter but the effects of the cover factor on the air permeability were not observed in the hollow composite yarn fabrics. The effects of porosity on the moisture and thermal permeability of the woven fabrics made from the hollow composite filaments were found to be critical, i.e., wicking and air permeability increase with increasing porosity. In addition, the drying rate increased with increasing porosity and the thermal conductivity decreased with increasing pore diameter, but were independent of the cover factor.  相似文献   

16.
In this paper, the composite reinforced with three dimensional orthogonal woven fabric/epoxy resin was fabricated with vacuum assisted resin transfer model. The tensile behavior in 0° and 90° directions were experimentally executed. The tensile behavior of 3D orthogonal woven composite was numerical simulated based on the unit cell model and compared with the experimental result, the influence of crack damage and stress on fiber, resin and fiber/resin interface was analyzed. The maximum differences between experimental and simulated results are 3.23 % and 7.94 %. The verified model can be used to simulate the other static and dynamic mechanical properties and analyze the influence of the behavior of component material on the mechanical material properties of 3DOWC.  相似文献   

17.
Jute fabric reinforced polypropylene composites were fabricated by compression molding technique. Fiber content in the composites was optimized at 45 % by weight of fiber by evaluating the mechanical parameters such as tensile strength, tensile modulus, bending strength, bending modulus. Surface treatment of jute fabrics was carried out by mercerizing jute fabrics with aqueous solutions of NaOH (5, 10 and 20 %) at different soaking times (30, 60 and 90 mins) and temperatures (0, 30 and 70 °C). The effect of mercerization on weight and dimension of jute fabrics was studied. Mechanical properties of mercerized jute-PP composites were measured and found highest at 20 % NaOH at 0 °C for 60 min soaking time. Thermal analytical data from thermogravimetric and differential thermal analysis showed that mercerized jute-PP composite achieved higher thermal stability compared to PP, jute fabrics and control composite. Degradation characteristics of the composites were studied in soil, water and simulated weathering conditions. Water uptake of the composites was also investigated.  相似文献   

18.
The effects of yarn number and liquid ammonia (L/A) treatment on the physical properties of woven fabrics prepared with pure hemp spun yarns were investigated. As a result of L/A treatment, the crystal structure of hemp fiber was changed from cellulose I to the mixtures of cellulose III and cellulose I and its crystallinity was slightly decreased by 13 %. The crease recovery of hemp fabric treated with L/A was improved upto 78 %. The washing shrinkage of hemp fabric treated with L/A decreased significantly to less than 0.4 %, while the washing shrinkage of hemp fabric prepared with the fined yarn was superior to that of hemp fabric prepared with the coarsed yarn. Especially, the wicking speed and drying ratio of hemp fabrics treated with L/A were higher than those of the untreated as yarn number increased. However, it was found that there is no significant effect on the UV protection of the L/A treated hemp fabrics.  相似文献   

19.
This study proposes a combination for reciprocal reinforcement between warp knitting spacer fabrics and PU foams. PET/Kevlar nonwoven fabrics are made with an 80:20 ratio and an incorporation of various needle-punching speed of 100, 150, 200, 250, and 300 needles/min. Ascribing to having an optimal bursting strength, sound absorption coefficient, and limited oxygen index (LOI), the PET/Kevlar nonwoven fabric that is made by 200 needles/min are selected to be combined with a glass-fiber fabric by applying needle punch in order to form a surface layer. Next, warp knitting spacer fabrics and the nonwoven fabrics are laminated, followed by being combined with polyurethane (PU) foam that are featured with different densities of 200, 210, 220, 230, and 240 kg/m3 in order to form spacer fabric/PU foam composites with multiple functions. The composites are then tested with a drop-weight test, a compression test, a bursting strength test, a sound absorption test, and a horizontal burning test. The test results indicate that all spacer fabric/PU foam composites reach a horizontal burning level of HF1, and their sound absorption coefficients at 2500-4000 Hz also suggest a satisfactory sound absorption. In particular, the optimal residual stress and compressive strength are present when the composites contain 210 kg/m3 PU foam. Similarly, the optimal bursting strength of the composites occurs when they are composed of 230 kg/m3 PU foam. The spacer fabric/PU foam composites are proven to have high strengths, sound absorption, and fire retardant, and thus have promising potentials for use as construction materials and light weight composite planks.  相似文献   

20.
Denim, a twilled cotton fabric, was used to enhance the mechanical and thermal properties of poly(lactic acid) (PLA). The denim fabric reinforced composites with different numbers of denim layers were fabricated by using a hand layup method. The impact, tensile, and dynamic mechanical properties of the composites were observed with increasing denim layers to examine the reinforcing effect of denim fabrics. Numerical analysis was carried out to model the elastic modulus of the composite by using a commercial software. Three-dimensional geometry of the denim fabric reinforced PLA composite was generated through a CAD program, and the elastic modulus was calculated by applying uniform deformation on one surface. The impact strength, tensile strength, and thermal properties of the composites were improved by piling denim fabrics. The denim fabric reinforced composites exhibited outstanding impact strength due to the retarded crack propagation as well as large energy dissipation. The 3 layer denim reinforced composite showed best results among all specimens, and its impact strength, tensile strength, and tensile modulus were measured to be 82 J/m, 75.76 MPa, and 4.65 GPa, respectively. The PLA/denim composites have good mechanical properties and can substitute traditional composites such as glass fiber or carbon fiber reinforced composites.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号