共查询到20条相似文献,搜索用时 296 毫秒
1.
土方工程量 V随着场地填挖深度的变化而变化 ,场地填挖深度是由设计高程 H决定的 ,土方工程量实质上是随着设计高程 H的变化而变化 ,因此 ,土方工程量 V与高程 H之间存在着函数关系。通过建立填方量方程 V=Φ( H)和挖方量方程 V=Ψ( H) ,组成方程组 ,应用微分的原理解方程组 ,求得二曲线的交点 ,即填挖平衡点 ,该点坐标即为所求的设计高程和土方量。用该方法确定的土方量与挖方量相等 ,土方工程量最小 ,而且计算一次成功 ,十分简便。新方法解决了以往所用的场地整平方法先确定设计高程后所计算的填、挖土方量不相等的矛盾和重新调整计算的麻烦 ,特别适用于有地形图的场地整平 相似文献
2.
在贮木场工程设计中,对场地平整和填挖方量的计算把最小二乘法的原理应用于方格网法,能使填挖实现基本平衡,工程量得到合理控制,节省平整场地的工程投资。 相似文献
3.
4.
5.
场地平整内业计算中,当场地图形包括若干矩形而成非对称图形时,重心定位难以定准,故要反复计算,否则不能达到填挖平衡。为了简化计算,本文根据力学原理,阐述了平整场地与平面直角坐标的关系,求得了不对称图形重心(零点)的精确定位方法和计算公式。 相似文献
6.
本文以森林资源调查工作实践为例,详细总结了如何利用Arc GIS10软件对纸质地形图,通过扫描、矢量化生成高程栅格数据;利用高程栅格数据进行等高线加密、高程统计、坡向和坡度分析,以及利用坡向、坡度等地形因子实现自动区划图斑的方法和过程。 相似文献
7.
本论文是利用三角网模型对场地平整的应用研究,主要是利用三角网的已知数据及三棱柱法对整个场地进行填挖方的计算。同时还对场地平整结果作了优化,当计算出的结果如不能满足需要时,那么就在此基础上进行重新计算,直到达到要求为止。 相似文献
8.
9.
在儿童公园的场地设计中,地形地貌的特点与场地的尺度大小、形态构成、活动空间安排等均关系密切。根据儿童公园以游戏空间为主导的特点,提出场地设计中地形利用应遵循因地制宜、突出特色及合理改造的原则。选取广州儿童公园场地设计中的地形利用佳例,重点分析儿童公园的入口空间、典型游戏空间、挡墙处理、地形利用等,探讨结合场地特点营造丰富有趣、特点鲜明的空间的途径。 相似文献
10.
数字地形模型的建立方法及其在林业中的应用 总被引:2,自引:0,他引:2
介绍了矢量数据转换为栅格数据的方法。以花溪地形为例,重点介绍了利用MAPGIS建立GIS数字地形模型(DTM)的方法。展望了数字高程模型在林业中的应用前景。 相似文献
11.
The digital elevation model (DEM), an important source of information, is usually used to express a topographic surface in
three dimensions and to imitate essential natural geography. DEM has been applied to physical geography, hydrology, ecology,
and biology. This study analyzed digital elevation data sources and their structure, the arithmetic of terrain attribute extraction
from DEM and its applications, and DEM’s error and uncertainty algorithm. The Hayachinesan mountain area (in northeastern
Japan) was chosen as research site, and the focus was on terrain analysis and the impacts of DEM resolution on topographic
attributes, analyzed using TNTmips GIS software (MicroImage, Inc., USA) and “Digital Map 25,000” (published by the Geographical
Survey Institute of Japan in 1998). The results show that: (1) DEM is a very effective tool for terrain analysis: many terrain
attributes (such as slope, aspect, slope type, watershed, and standard flow path) can be derived, and these attributes can
be displayed with both image and attribute databases, with the help of GIS; (2) DEM resolution has a great influence on terrain
attributes. The following details are shown: (a) DEM resolution has a significant effect on slope estimation: the average
slope becomes smaller and the standard deviation becomes larger when DEM resolution changes from fine to coarse, and the different
impacts of DEM resolution on different slope ranges can be classified into three gradient classes: 0–10° (underestimated slope),
10–35° (overestimated slope), and >35° (little impact on slope estimation); (b) DEM resolution has little effect on aspect
estimation, but flat areas become larger when DEM resolution changes from fine to coarse; and (c) the quantity of hydrologic
topography information declines as DEM resolution decreases.
Translated from Journal of Beijing Forestry University, 2005, 27(2) (in Chinese) 相似文献
12.
本文以帽儿山实验林场DEM数据为基础,利用ArcGIS10.0的水文分析功能,对帽儿山地区进行了水文分析,提取该地区水流长度、生成河网并对河网进行分级等。结果表明,用地理信息系统水文分析功能提取的河网与实际地形基本一致,可以作为一种工具,根据DEM数据来提取水文信息。 相似文献
13.
14.
基于ArcGIS Engine二次开发的国有林场DEM数据生产及实现 总被引:1,自引:0,他引:1
王劲松 《中南林业调查规划》2009,28(3):40-43,62
DEM即数字高程模型,主要包括规则格网模型(GRID)和不规则三角网模型(TIN);在visual C++6.0编程环境下,应用ArcGIS Engine的COM接口对已获得的具有高程信息的矢量数据通过TIN构网,生产出满足国有林场日常生产和规划设计的DEM数据。 相似文献
15.
Application of an airborne laser scanner to forest road design with accurate earthwork volumes 总被引:1,自引:0,他引:1
In this study we developed a forest road design program based on a high-resolution digital elevation model (DEM) from a light detection and ranging (LIDAR) system. After a designer has located the intersection points on a horizontal plane, the model first generates the horizontal alignment and the ground profile. The model precisely generates cross-sections and accurately calculates earthwork volumes using a high-resolution DEM. The model then optimizes the vertical alignment based on construction and maintenance costs using a heuristic technique known as tabu search. As the distance between cross-sections affects the accuracy of earthwork volume calculations, the results were examined by comparing them with the exact earthwork volume calculated by the probabilistic Monte Carlo simulation method. The earthwork volumes calculated by the Pappus-based method were similar to those calculated by the Monte Carlo simulation when the distance between cross-sections was within 10m. The model was applied to a high-resolution DEM from the LIDAR of Capitol Forest in Washington State, USA. The model generated a horizontal alignment, length 827m, composed of five horizontal curves. We examined the number of grade change points. The results indicated that tabu search found the best solution ($61.42/m) with five grade change points. This was composed of two vertical curves that almost followed the ground profile. As the accuracy of a high-resolution DEM from LIDAR increases, the model would become a useful tool for a forest road designer because it eliminates or at least reduces the time-consuming process of road surveys. 相似文献
16.
以林场造林规划设计中立地类型划分为目标,以小班为基本单元,以获取小班的立地类型为目的,在嵌入式组件GIS软件--MapObjects(MO)的支持下,讨论立地决策支持模型的基本组成及建立过程.其由二级决策支持模型组成,即立地区划决策支持模型和立地类型决策支持模型.将造林地的空间信息与属性信息结合起来,运用MO所提供的空间分析模块,结合MO的空间SSQL查询语句,对基于立地因子的立地类型知识库和基于行政区划的立地亚区知识库进行操作,实现造林地小班的立地类型自动决策. 相似文献
17.
18.
福州市林地景观斑块特征分析 总被引:1,自引:0,他引:1
利用福州市的土地利用现状图和地形图,在GIS软件的支持下,对福州市林地景观的地形分布格局进行了空间分析和统计,然后采用景观格局指数分析方法,分别从景观格局的总体特征、斑块规模特征、斑块破碎化特征以及斑块形状特征等4个方面,分析了福州市林地景观类型的斑块特征和景观破碎化程度,并对其成因进行了探讨。 相似文献
19.
安全科学扑火是森林消防的重要工作,影响扑火安全的因素很多,其中地形是最基础的因素.一些特殊的地形对扑火人员的生命安全构成了极大的威胁,如陡坡、窄山谷、窄山脊、单口山谷(葫芦峪)、鞍部、悬崖等,如何高效地识别扑火危险地带,对于科学指挥、安全灭火至关重要.文章以广州市大岭山林场为例,采用GIS(地理信息系统)的栅格分析方法,基于DEM(数字高程模型)分析识别林火扑救危险地带的地形特征,建立ArcGIS可视化分析模型快速提取危险地带,与实际地形对比准确度很高,表明该方法科学有效. 相似文献