首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Japonica (Tainung 67 [TNu67]) and waxy (Taichung 70 [TCW70]) rice, normal and waxy corn, and cross-linked waxy rice and corn starches were used in an investigation of the influence of the granular structure on the pasting behavior of starch, using small amplitude oscillatory rheometry. Both normal corn and normal rice (TNu67) starches had the highest storage moduli (G′), followed by their cross-linked versions; native waxy corn and rice starches had the lowest. Native waxy starches showed paste characteristics (G′ < 500 Pa; tan δ > 0.2) at concentrations of up to 35%. However, cross-linked waxy starches exhibited gel behavior at 10% concentration (cross-linked TCW70) or higher (cross-linked waxy corn starch). The degrees of swelling power were in the order: TCW70 > native waxy corn > TNu67 ≅ cross-linked TCW70 ≅ normal corn ≅ cross-linked waxy corn starches. Solubilities were in the order: normal corn > TNu67 > native waxy > cross-linked waxy starches. The addition of 2% purified amylose from indica rice (Kaohsiung Sen 7) did not induce gelation of waxy corn starch. Swelling powers of normal corn, TNu67, and crosslinked waxy starches were similar, but normal corn and TNu67 had much higher G′ value. Such results implied that the formation of gel structure was governed by the rigidity of swollen granules and that the hot-water soluble component could strengthen the elasticity of the starch gel or paste.  相似文献   

2.
Zero amylose starch isolated from hull-less barley (HB) showed a typical A-type diffraction pattern. The X-ray analysis suggested that granules of zero amylose (SB94794) and 5% amylose (CDC Candle) HB starches had lower crystallinity than did commercial waxy corn starch. Differential scanning calorimetry showed lower transition temperatures and endothermal enthalpies for the HB starches than for the waxy corn starch. The zero amylose HB starch showed a Brabender pasting curve similar to that of waxy corn starch, but with lower pasting and peak temperatures and a higher peak viscosity. Noteworthy characteristics of zero amylose HB starch were its low pasting temperature and high paste clarity and freezethaw stability, which make this starch useful for many food and industrial applications.  相似文献   

3.
Waxy maize (native and hydroxypropylated [HP]) and potato starches were impregnated with ionic gums (sodium alginate, CMC, and xanthan, 1% based on starch solids) and heat‐treated in a dry state for 0, 2, or 4 hr at 130°C. Effects of the dry heating on paste viscosity (RVA) and clarity (light transmittance) were examined. Heat treatment with sodium alginate and CMC raised the paste viscosities of native and HP waxy maize starches, but decreased that of potato starch. Xanthan provided the most substantial changes in paste viscosity among the tested gums. It appeared to heavily restrict granule swelling of the waxy maize starches, but it increased swelling of potato starch granules. Dry heating raised the paste viscosity of all the starch‐gum mixtures tested, except the potato starchalginate mixture. The final viscosity at 50°C of a 7% paste was raised in all other starches by ≈500–1,000 cP by this treatment. The paste of waxy maize starch‐gum products became opaque and shorter textured by the heat treatment, regardless of the gum type, whereas potato starch‐gum products did not show any obvious change in paste clarity. Ionic gums could behave as cross‐linking agents as well as form graft copolymers through heatinduced ester formation. This simple heating process with ionic gums could be used as a modification method for starch.  相似文献   

4.
Native starch from waxy mutant wheat Tanikei A6599‐4 is known to exhibit more stable hot paste viscosity than a typical waxy wheat (Tanikei H1881) and waxy corn. The objective of this study was to investigate the starch paste properties of Tanikei A6599‐4 after cross‐linking and compare with Tanikei H1881 and waxy corn. As an example of cross‐linking, the reaction (at 30, 60, 120, and 360 min) with sodium trimetaphosphate was used. In Rapid Visco Analyser (RVA) measurement, the unique characteristic was maintained in Tanikei A6599‐4 starch cross‐linked at low reaction time (<120 min) levels. Cross‐linking at a high reaction time (360 min) level suppressed the swelling of both Tanikei A6599‐4 and Tanikei H1881 starches but not waxy corn starch. Although unmodified Tanikei A6599‐4 starch showed the lowest paste clarity among unmodified waxy starches, this defect became unremarkable when starch was cross‐linked for ≥120 min. In gel‐dispersed dynamic viscoelasticity measurement, the order of G′ and G″ values was always Tanikei A6599‐4 > Tanikei H1881 > waxy corn. This indicates that cross‐linked Tanikei A6599‐4 and Tanikei H1881 starches have different starch properties and that swollen Tanikei A6599‐4 starch granules are more rigid than swollen Tanikei H1881 starch granules.  相似文献   

5.
Retrogradation in 2% pastes prepared from unmodified commercial starches by cooking at 98–100°C under low shear, then held at 4°C for 56 days, was examined by turbidometric analysis and light microscopy. Turbidometric analysis revealed that retrogradation rates followed the order of wheat, common corn > rice, tapioca, potato ≫ waxy maize. Microstructures of stored pastes were examined both before and after centrifugation. Granule remnant morphologies and fresh and stored paste microstructures were unique to each starch examined. Fresh pastes from amylose-containing starches were dominated by networked amylose that condensed into higher density aggregates upon storage. Unique phenomena seen in some stored pastes included interactions of granular remnants with aggregated amylose, composite networks of co-associated amylopectin and amylose, and slight birefringence regained by granule remnants. Microstructural changes in stored pastes could be related to changes in turbidity and to the results of other methods used to quantitate retrogradation.  相似文献   

6.
Microscopic techniques were used to determine accessible regions in various starches under different swelling conditions. Fatty acyl chlorides of increasing chain length (C6–C16) were reacted with 2‐aminopyridine to produce the corresponding fatty acyl amides. Starch granules (common corn, waxy maize, potato) were treated with the series of fluorescent amides under a variety of conditions: anhydrous (hot pyridine), aqueous (no heat), and aqueous alkali (49°C, with and without swelling‐inhibiting salts). Isolated granules were then viewed by confocal laser scanning microscopy to determine reagent analog penetration. All populations of granules were heterogeneous with respect to fatty acyl amide penetration, but general patterns could be discerned. Observations also indicated that the area surrounding the hilum was more easily penetrated than was the rest of the granule matrix. No substantial differences in penetration of the fluorescent fatty acyl amides as the chain length increased (C6–C16 was observed in hot pyridine‐swollen common corn starch granules. Common corn and potato starch granules swollen in room temperature water showed cutoffs for granular exclusion at C14 and C12, respectively. Common corn, waxy maize, and potato starch granules treated under industrial etherification conditions (heat, pH ≈ 11, swelling‐inhibiting salts) were less accessible to C6, C8, and C10 fluorescent amides when sodium citrate was present than when sodium sulfate was used, and less accessible in either case than in water alone or in hot anhydrous pyridine. However, appreciable differences between inhibition by sodium sulfate and sodium citrate were not observed in every case.  相似文献   

7.
Properties of modified starches from partial waxy wheats have not been examined. Protease digestion of cracked kernels of three hard winter wheats varying in amylose content led to 82–85% recovery of starch, whereas kneading of the flour-water doughs gave 75–83% recovery. All starches had a protein content of <0.3% and ash content of <0.01%. Granule size distributions showed that starch from Ike kernels contained 86% A-type granules with a peak size of ≈18μm, and Karl-92 starch contained 77% A-type granules with a peak size of ≈16μm. The A-type granules (82%) from Rio Blanco starch were intermediate in size. The amylose content of Karl-92 starch, determined by concanavalin-A precipitation of amylpectin, was 28%, which was 17% higher than that of Ike starch (23%). The amylose content of Rio Blanco starch was 26%. The lipid content of Karl-92 starch, determined as fatty acid methyl esters, also was 18% higher than that of Ike starch (601 vs. 488 mg/100 g of starch, respectively). Wheat starches were modified with hydroxypropyl (HP) groups to low (1.5–2.5%) and medium (≈4.0%) levels, and the HP starches were cross-linked with phosphoryl chloride at levels of 0.003–0.075%. Pasting curves (amylograms) showed that Ike starch substituted with a low level of HP and optimally cross-linked with 0.025% phosphoryl chloride (starch basis) had a greater paste consistency than low HP cross-linked Karl-92, and Rio Blanco starches. At 4% HP and optimum cross-linking (0.003% phosphoryl chloride), the paste consistencies of the modified starches were nearly the same. The clarity of unmodified Ike starch paste was higher than that of Karl-92 or Rio Blanco starch pastes, and the clarity of all three pastes decreased as cross-linking was increased. Unmodified Ike starch formed a stronger gel than unmodified Karl-92 and Rio Blanco starches, but gel properties largely converged as the starches were modified.  相似文献   

8.
Native starch granules of 11 selected cultivars (potato, waxy potato, sweet potato, normal maize, high‐amylose maize, waxy maize, wheat, normal barley, high‐amylose barley, waxy barley, and rice) were treated with a calcium chloride solution (4M) for surface gelatinization. The surface‐gelatinized starch granules were investigated using light microscopy and scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). In general, those starches with larger granule sizes required longer treatment time to complete the gelatinization. The salt solution treatment of starch was monitored by light microscopy and stopped when the outer layer of the granule was gelatinized. The surface gelatinized starch granules were studied using scanning electron microscopy. On the basis of the gelatinization pattern from calcium chloride treatments, the starches could be divided into three groups: 1) starches with evenly gelatinized granule surface, such as normal potato, waxy potato, sweet potato, maize, and high‐amylose maize; 2) starches with salt gelatinization concentrated on specific sites of the granule (i.e., equatorial groove), such as wheat, barley, and high‐amylose barley; and 3) starches that, after surface gelatinization, can no longer be separated to individual granules for SEM studies, such as waxy barley, waxy maize, and normal rice. The morphology of the surface gelatinized starch resembled that of enzyme‐hydrolyzed starch granules.  相似文献   

9.
To observe granular reaction patterns within modified starch granules, starch derivatives were converted to thallium(I) salts and viewed by scanning electron microscopy compositional backscattered electron imaging. Observation of phosphorylated potato and sorghum starches and a hydroxypropyl analog of waxy maize starch revealed that granular patterns of reaction were influenced by both starch and reagent types. In waxy maize and sorghum starches, flow of reagent into the granule matrix occurred from channels (laterally) and cavities (from the inside outward). In potato starch granules, which do not possess channels, reagent diffused inward through exterior granule surfaces. Phosphoryl chloride (highly reactive) reacted to a large extent at granule surfaces, while the propylene oxide analog (less reactive) appeared to diffuse into the granule matrix prior to reacting.  相似文献   

10.
Hull-less barley (HB) has been investigated in many countries for use in feed, food, and industry since the publication of the last review in 1986. Literature published since 1990 on various aspects of HB utilization, other than in monogastric feeds, has been reviewed. Several HB cultivars containing low or β-glucan, low or high extract viscosity, and waxy (0–5% amylose) or normal starch are now available. Interest in HB utilization in the food industry developed largely due to its high β-glucan content, particularly in the waxy cultivars. β-Glucan is a major component of soluble fiber implicated in hypocholesterolemia, hypoglycemia, and in reducing incidence of chemically induced colon cancer in experimental animals. However, large-scale clinical trials using human subjects are needed to corroborate these effects. The zero amylose HB starch had low syneresis or a high freeze-thaw stability suitable for use in frozen foods. Single- or double-modified waxy HB starch may replace corn starch in some food applications, and cationized HB starch can replace corn and potato starches in the pulp and paper industry. HB may be milled using conventional wheat milling equipment to yield bran and flour for multiple food uses. Hull-less barley may also be used as a feed stock for fuel alcohol production, for the preparation of food malt with low or high enzyme activities, and for brewer's and distiller's malts.  相似文献   

11.
Normal corn, high-amylose corn, waxy corn (waxy maize), wheat, rice, potato, cassava (tapioca), and a modified waxy corn starch were blended in various combinations and ratios. Pasting behavior, paste and thermal properties, and retrogradation tendency were determined. Differential scanning calorimetry (DSC) traces of the mixtures did not resemble those of either of the two components, nor did any DSC trace have two peaks suggestive of a mixture of two distinct starches. Amylograph data suggested that some mixtures behaved like a chemically modified starch. Observations from light microscopy suggested that intermolecular, molecular-supermolecular, and intersupermolecular interactions may be responsible for this behavior.  相似文献   

12.
Wheat has great potential to make inroads into starch markets with the advent of partial waxy and waxy starches of diverse composition and properties. The majority of isolated starch utilized in food applications is chemically modified to improve starch properties according to the intended use. Therefore, it is critical to understand factors that affect wheat starch reactivity. This work investigated the relative reactivities of normal, partial waxy, and waxy wheat starches and their respective A‐ and B‐type starch granule fractions. Native starch isolated from four closely related soft wheat lines (normal, partial waxy, and full waxy) was modified through 1) substitution (propylene oxide analog) and 2) cross‐linking (phosphorus oxychloride) reactions to generate both types of modified starch products for each wheat line. Characterization of the unmodified starch fractions confirmed compositional differences among the cultivars and their respective granule types. In cross‐linking reactions, B‐type granules were slightly more reacted than A‐type granules for all cultivars, while the waxy starch generally exhibited higher reactivity compared with normal and partial waxy starches. For the substituted starches, no differences in reactivity were observed among the cultivars or between the two granule types.  相似文献   

13.
The functional properties and enzymatic digestibility of cationic and cross-linked cationic ae, wx, and normal maize starches were studied. Cationization reduced the endothermic transition temperatures (T(o), T(p), and T(c)), however, it increased peak viscosity, swelling power, solubility, clarity, and digestibility of all the starches compared to the corresponding native starch. After cationization, the enthalpy of waxy and normal starches was little changed but ae starch showed a decrease. For gel texture, cationization increased the hardness, adhesiveness, and springiness of all the starches, except for the hardness and adhesiveness of normal starch which showed a decrease, and the springiness of waxy starch did not show much change compared to the corresponding control starch. Cross-linking of cationic starch increased the endothermic transition temperatures, as well as peak viscosity. However, it reduced the swelling power and solubility, clarity, and enzymatic digestibility of all the cationic starches.  相似文献   

14.
Waxy maize and potato starches were dispersed in pH 6.0 and 8.0 aqueous solutions (1%) of an ionic gum (sodium alginate, sodium carboxymethylcellulose, and xanthan). The mixture was dried at 45°C overnight and then heat‐treated 2 hr at 130°C. Effects on the paste viscosity of the products in a pH 7.0 buffer were examined. Heating with sodium alginate or sodium carboxymethylcellulose (CMC) increased the paste viscosity of waxy maize starch but reduced that of potato starch. In both starches, xanthan effected greater viscogram changes than did sodium alginate or CMC. Use of xanthan in the treatment produced products with restricted granular swelling and increased shear stability of the pastes. The pH of the starch‐gum mixtures affected the thermally induced viscosity changes. Mild acidity (pH 6.0) effected a viscosity decrease for the heat‐treated starch product, whereas alkalinity (pH 8.0) raised the viscosity regardless of the presence of gum. But pH 6 before heat treatment was favored for viscosity increase by sodium alginate, whereas pH 8 gave a greater increase in viscosity when xanthan was used. By using gum mixtures such as xanthan‐alginate and xanthan‐CMC, both viscosity increase and good shear‐stability were achieved.  相似文献   

15.
Starch suspensions (0.25%) were gelatinized to 70 and 100°C, and starch ghosts (defined as gelatinized starch granule envelopes after the majority of internal starch polymers have been released) and remnants were collected by centrifugation and washed with water. Protein was revealed in isolated gelatinized normal starch ghosts using confocal laser scanning microscopy and a protein‐specific dye that fluoresces only after reaction with primary amines in protein. This technique eliminates background interference from residual dye. Observation of fluorescent‐labeled protein in the starch ghosts at different optical depths of field revealed that protein was concentrated in the envelopes of swollen, gelatinized potato, maize, and wheat starch ghosts. Only traces of protein were found in gelatinized starch granule remnants of waxy maize and amylose‐free potato starches after they were heated to 100°C, indicating that the proteins observed in gelatinized normal maize starch were largely granule‐bound starch synthase (GBSS). Moreover, fragility of the gelatinized waxy and amylose‐free starch granule remnants might be caused in part by the lack of GBSS. Gel electrophoresis of proteins in starch ghosts confirmed that GBSS in potato and maize was tightly associated with the starch ghosts. The study provides a structural explanation for a role of granule‐associated proteins in maintaining the integrity of starch ghosts and remnant structures, and their consequent effect on paste rheology.  相似文献   

16.
Phosphorylated starches were prepared with sodium tripolyphosphate (STPP) at pH 6, 8, and 10 from waxy (wx, 3.3% amylose), normal (22.4% amylose), and two high-amylose (ae, 47 and 66% amylose) maize starches. After phosphorylation, the gelatinization peak temperature (Tp) decreased and pasting peak viscosity (PV) increased for all the starches except wx, which showed a slight increase in gelatinization temperature. There was a substantial effect of phosphorylation pH on paste viscosity. More crosslinking was found in ae starches with phosphorylation at pH 10. Sodium ions apparently decreased PV of all the phosphorylated starches while only slightly affecting PV of native starches. Phosphorylation increased swelling power of some of the starches, with maximum swelling power at phosphorylation pH 8 and minimum at pH 10. Maximum swelling power for wx starch after preparation was at pH 8 and minimum at pH 6. After phosphorylation, the clarity and freeze-thaw stability of all the starches was greatly increased compared with the native starches. Phosphorylation increased digestibility of ae starches but had little effect on wx and normal starches. After phosphorylation, the adhesiveness, springiness, and cohesiveness of all starch gels generally increased, the hardness of 47% ae and wx starches increased, and that of normal starches decreased. Enthalpy of gelatinization decreased after phosphorylation with the greatest decrease observed for ae starches. When the phosphorylation pH increased from 6 to 10, the brightness (L*) of all the phosphorylated starches decreased, while a* and b* of all the phosphorylated starch increased. Scanning electron micrographs showed some erosion on the surface of starch granules after phosphorylation.  相似文献   

17.
几种淀粉的糊化特性及力学稳定性(简报)   总被引：3，自引：1，他引：2  
为探索淀粉糊化的力学稳定性,以不同来源淀粉为原料,采用快速黏度分析仪于不同搅拌速度下,研究外力作用对淀粉糊化特性的影响,为淀粉质食品的品质控制提供依据。结果表明,不同来源淀粉的黏度曲线及其力学稳定性有差异。以小麦淀粉的糊化温度最低;马铃薯淀粉糊的黏度和温度稳定性最大;马铃薯和莲子淀粉的峰值黏度较高,冷糊稳定性好;莲子淀粉的热糊稳定性差;玉米淀粉糊易于老化。外力作用对淀粉糊的黏度曲线有影响。较强的外力作用后,会导致淀粉糊的强度、黏度和糊化温度降低,改善热糊稳定性和冷糊稳定性。淀粉糊化的力学稳定性与其颗粒强度有关,较大颗粒强度的淀粉的力学稳定性较好。  相似文献   

18.
The effect of amylose-lipid (AM-L) complexes consisting of amylose populations with different peak degrees of polymerization (DP) and complexed with glyceryl monostearate (GMS) or docosanoic acid (C22) on the pasting properties of wheat and rice starches was evaluated with a rapid visco analyzer (RVA). AM-L complexes were formed by both (i) addition of lipids to amylose fractions with peak DP 20, 60, 400, or 950 at 60 degrees C or (ii) potato phosphorylase-catalyzed amylose synthesis in the presence of lipids. All AM-L complexes affected pasting properties in line with their dissociation characteristics. AM-L complexes therefore have potential as "controlled lipid release agents" with effects markedly different from those observable with emulsifier addition in starch pasting. More in particular, short chain AM-L complexes resulted in a starch pasting behavior comparable to that of cross-linked starch, as evidenced by reduced granule swelling, good viscosity stability in conditions of high temperature and shear, and a stable cold paste viscosity.  相似文献   

19.
Starches of wheat, corn, smooth and wrinkled peas, and chickpeas were modified to a free‐flowing powder of granular cold‐water gelling (GCWG) starch using liquid ammonia and ethanol at 23°C and atmospheric pressure. Amylose content of starches was 26.3% in wheat, 27.1% in corn, 35.4% in chickpeas, 43.2% in smooth peas, and 79.9% in wrinkled peas. The modified starches remained in granular form with an increased number of grooves and fissures on the surface of the granules compared with native starch, while the crystallinity was mostly lost, as shown by X‐ray diffractograms and DSC endothermic enthalpies. Pasting viscosity of modified starches at 23°C was 171 BU and 305 BU in wheat and corn, respectively, and much higher in legume starches, ranging from 545 BU to 814 BU. Viscosities of modified legume starches at 23°C were at least twice as high as those of native starches determined at 92.5°C. Swelling power of modified starches at 23°C ranged from 8.7 g/g to 15.3 g/g, while swelling power of native starches heated to 92.5°C ranged from 4.8 g/g to 16.0 g/g. GCWG starches exhibited higher dextrose equivalent (DE) values of enzymatic hydrolysis, ranging from 25.2 to 27.0 compared with native starches (1.5–2.9). Modified starches from wheat, corn, smooth peas, and chickpeas formed weak gels without heat treatment and experienced no changes in gel hardness during storage, while native starch gels formed by heat treatment showed an increase in hardness by 1.1–7.5 N during 96 hr of storage at 4°C.  相似文献   

20.
Differences in the degree of starch granule swelling and granule morphology are shown as a function of iodine concentration during heating. The observations reveal a restriction and delay in wheat and corn starch swelling in presence of iodine (0.02%) and a lack of swelling at higher iodine concentration (0.2%). The presence of iodine during heating did not influence waxy corn starch granule swelling, even at the higher concentration. A delay in the increase in paste viscosity during heating was observed, and gel formation was precluded after cooling at the higher iodine concentration. Waxy corn starch pastes formed a weak gel even at the higher iodine concentration. Spectrophotometric analyses showed that polymers leach into the solution when heated in the presence of 0.02% iodine, while no leaching was observed at 0.2% iodine concentration. Furthermore, the length and the amount of polymers leaching from normal corn were different from that observed for wheat starch. Thermal analyses reveal a shift in the onset of gelatinization temperature and an increase in the enthalpy in the amylose‐lipid region of the endotherm. While the iodine‐polymer complex did not appear to exhibit an endotherm during heating, the granules exhibited a diffused polarized cross, suggesting the presence of an ordered complex.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号